Availability
Showing In Stock Items. Show All 401 Items.
Dakota Digital presents the missing link between your cable-driven speedometer and late model electronic transmission! Measuring 5 1/2 in. x 3 1/2 in. x 2 in., these adapters allow a mechanical-cable speedometer to be used in conjunction with a modern drivetrain which provides only an electronic output. The units use PID control of the cable speed to provide quick, smooth operation, as well as prevent overdriving or damage to the speedometer needle. Consider these adapters as the most precise and easiest to use cable-drive units on the market. Additional features of Dakota Digital electronic signal to mechanical cable drive adapters: * 36 in. cable available for GM thread-on, GM clip-on, and Ford clip-on style speedometers (select preferred model) * Powerful motor is quiet enough to mount the module inside the cabin * Waterproof case can also be mounted under the hood, or even inside a fenderwell * Bluetooth-enabled to sync with available mobile app for stone-simple set up * Supplied programming switch and LED readout make setup easy * For OBD-II equipped vehicles; the supplied pigtail will easily plug into the DLC, simplifying the wiring connections
( 16 )
$380.00
These Dakota Digital cruise control kits for electronic speedometers are designed to add cruise control to any vehicle with an electronic speedometer gauge. They include an electric servo, a wiring harness, and mounting hardware. They are compatible with 2,000 to 40,000 pulse-per-mile speedometer signals. Information on the handle design is required before ordering.
( 44 )
$541.50
—
$655.50
On Sale
Manufacturer Rebate
AutoMeter Programmable Electronic Speedometer Senders convert your mechanical speedometer takeoff or electronic sensor-style speedometer output to an electronic pulse output. They're designed for use with custom installations, early model transmission applications, and all AutoMeter electronic speedometers. The senders are available in different styles for a variety of auto make applications.
( 55 )
$117.99
$106.19
—
$109.99
On Sale
AEM Electronics X-Series digital GPS speedometers pack a lot of features into one high performance gauge. These versatile instruments will track speed, heading, and altitude. Despite the larger LED display, they're housed in a standard 2 1/16 in. diameter case and feature a slimmer profile to mount anywhere. Additional features: * Integrates with the Infinity ECU, Series 2, or EMS-4 via AEMnet CAN bus to add track mapping * 24 green outer LEDs for quick reference to engine parameter * Peak/recall via gauge face buttons * User-selectable units of measurement (US or metric) * 0-5 V analog outputs for transmitting data to EMS or data-logger * Auto-dimming sensor delivers ideal display brightness * Positive locking connectors provide secure connection * Optional silver bezel with white faceplate accessory kit available (sold separately; see Suggested Parts tab)
( 13 )
$199.95
$179.95
Biker's Choice electronic replacement speedometers will answer the question, "Do you know how fast you were going?" Their black faces, white markings, and red pointers topped with shiny bezels will also give your bike's look quick style. Reply to speed queries with electronic replacement speedometers from Biker's Choice.
Not Yet Reviewed
$214.32
Dakota digital external GPS antennas are designed for use with the GPS speed sender. They plug directly into the optional port on the sender and—when combined with the sender—will send signals back to your VFD3 or VHX instrument system.
( 24 )
$28.50
Hypertech's In-Line Speedometer Calibrator Modules are an in-line module that corrects your vehicles speedometer and odometer for unlimited tires sizes and/or rear gear ratios. These modules are perfect for vehicles with computers that don't allow for tire size and/or rear gear ratio correction or want to re-calibrate for sizes outside the range of programmers. Installation is a snap. Using the included USB cable, connect the Hypertech In-Line Speedometer Calibrator Module to your PC and enter the new tire height and/or rear gear ratio. There are no limitations to tire height or rear gear ratios. Next, simply disconnect the factory connector to the instrument cluster (behind the dash), snap in the Speedometer Calibrator Module, reconnect the cluster, and you¹re done! In a matter of minutes, you can accurately correct your speedometer and odometer readings (as required by law).
( 21 )
$230.09
—
$899.95
Changing tire and gear sizes can have an adverse effect on your speedometer and odometer readings. To correct this, Hypertech has assembled some of the best features from their series of programmers and tuners into one stand-alone unit. Hypertech speedometer calibrators will adjust for a wide range of tire sizes and gear changes (not all applications can adjust for gear changes) to keep your speedometer reading properly without the additional cost of buying a complete tuner. Installation is as easy as plugging one of the calibrators into your vehicle's OBDII diagnostic port, and while you're there, they can even read and clear diagnostic trouble codes.
( 46 )
$224.09
—
$279.95
Your vehicles computer is designed to track the speed based on your stock tire height. When upgrading to larger tires, there will be a discrepancy between your actual speed and the readout on your speedometer. Rough Country speedometer calibration devices are easy to use to help you quickly reprogram your vehicles speedometer to match the output of your larger tires. These plug-and-play devices connect directly to your vehicle's diagnostic link connector port and in just a few short minutes your speedometer reads true again. Plus, they not only change your in-dash readout, but they also update your vehicles ECM, ensuring accurate shift points and proper electronic stability control. Finally, you can get an affordable and accurate speedometer calibration with an easy and intuitive setup process, thanks to Rough Country. Choose the device designed for your vehicle.
Not Yet Reviewed
$39.95
—
$179.95
Dakota Digital cruise control kits for cable-driven speedometers are designed to add cruise control to any vehicle with a mechanical speedometer. They include an electric servo, wiring harness, electric speed sensor, and mounting hardware. Information on the handle design is required before ordering.
( 69 )
$722.00
On Sale
Manufacturer Rebate
AutoMeter GPS speedometer interface modules can turn any electronic speedometer into a GPS speedometer with just the push of a button. They offer plug-and-play functionality with any AutoMeter programmable electronic speedometer and simple on-button, 10-second calibration for nearly every other electronic speedometer on the market. They feature IP67 construction and are fully sealed against water and dust. They include a fully sealed and paintable magnetic micro antenna and a lightning-fast 10 Hz sampling rate.
( 47 )
$258.99
$233.09
Stewart Warner GPS speedometer receiver modules provide true ground speed. They are designed to be used with electronic speedometers that are calibrated to either 8,000 or 16,000 ppm (pulses per minute). These units work out of the box with Stewart Warner Wings, Power Series, and Greenline speedometers, as well as with their Deluxe speedometers with 120 mph scale and higher.
( 15 )
$210.99
Classic Instruments Speedbox 2.0 speedometer interfaces are the ultimate solutions for effortlessly upgrading your cable-driven mechanical speedometer. They are designed to operate a cable-driven mechanical speedometer using an electric speed signal from GPS, CAN-bus speed data through the OBD-II, or vehicle speed sensor (VSS). Assembled with high-quality components, each CI SpeedBox 2.0 interface requires only a 12 V and ground for a hassle-free, plug-n-play install that eliminates the need for tedious calibration or subscription services. Features: * Fits Ford, GM, and Chrysler speedometers only * Easy plug-and-play connections to make the conversion painless * Can retain factory speedometer look for specific barrel type speedos * Can be installed in the dash or under the hood, but is not waterproof * Converts cable-driven mechanical speedometers to support electronic inputs
Not Yet Reviewed
$449.95
On Sale
B&M speedometer port plugs are used to block the mechanical speedometer gear port when upgrading to an electronic speedometer and keep contaminants from getting in your transmission. They feature a black Mil-Spec anodized finish for long lasting good looks, even in harsh conditions. B&M speedometer port plugs come with installation instructions for an easy and quick installation.
( 28 )
$36.74
$32.03
—
$47.25
TCI speedometer control units are the perfect solution to retrofitting an electronic transmission. These economical adapters pigtail into the electronic speedometer harness and have a connection to power a cable-driven speedometer. They are fully configurable for any tire size and rear gear ratio. Cables made to fit specific transmissions are sold separately.
( 1 )
$587.95
—
$597.95
ICT Billet speedometer delete plugs are used to block the mechanical speedometer gear port when upgrading to an electronic speedometer and keep contaminants from getting in your transmission.
( 13 )
$22.99
—
$36.99
If you're using a mechanical speedometer cable, you'll need to cover the port with a plug. Bowler Performance transmission speedometer plugs will block off the mechanical speedometer port opening on Tremec TKX, TKO, 3550, Borg Warner T-45, Ford T-5, and the T-56 Magnum transmissions. If you're running an electronic speedometer, this is a must-have. These high-quality plugs are machined from billet aluminum. An O-ring is also included to prevent fluid leaks. (Does not include bolt.)
( 3 )
$41.99
Quickly and accurately program your speedometer with Classic Instruments speedometer signal interface modules! Push the button once, drive a measured mile, and then push the button again! That's all there is to it! These modules install inline between the transmission pulse signal or ECM speed output and your electronic speedometer. They convert all known pulse signals to 16,000 ppm or 8,000 ppm signals and include an additional 8,000 ppm output signal for your cruise control. Classic instruments speedometer signal interface modules have a real-time calibration feature, allowing for total fine-tuning. Their filtered power source eliminates interference. These compact modules are designed to work with most aftermarket electronic speedometers and they can be mounted anywhere inside your vehicle!
Not Yet Reviewed
$55.71
Steeda speedometer plugs cover up the mechanical speedometer gear access hole in the new TKO 500 and TKO 600 transmissions, so they can be used on 1999 and later Mustangs with electronic speedometer pickups. The new TKO transmissions are equipped with dual speedometer pickups to work with either electronic or mechanical speedometer pickups. A plug is required to cover the mechanical access hole if it is not being used. The plugs also fit most common Ford transmissions, such as the T-5 and T-45, and are designed for use on race cars without speedometers.
( 11 )
$19.95
The need for speed is often accompanied by a demand for accurate feedback. In fact, a speedometer at times becomes the most important gauge on the dash panel. If your system is malfunctioning or you prefer an upgrade in data precision, Dakota Digital electronic sending units deliver clean, sharp signals from your transmission to the speedometer. Some replacement kits process 8K pulses per mile, and others 16K, for instance--you choose the application and attachment style that's best for your particular vehicle.
( 67 )
$41.80
—
$57.00
On Sale
Use a New Vintage USA speedometer sender to convert your mechanical speedometer takeoff or your electronic sensor-style speedometer output to an electronic pulse output. These speedometer senders are designed for use with custom installations, early model transmission applications, and all Marshall electronic speedometers.
( 15 )
$39.95
—
$109.99
$35.96
—
$98.99
On Sale
Intellitronix speedometer sending units provide high-accuracy readouts and are offered in different model types to fit your specific transmission sending unit connection. Select the speedometer sending unit to fit your application.
( 23 )
$57.82
$52.04
HardDrive mini speedometers are available with a black or white dial face with LED lights and a stainless steel housing that is both waterproof and vibration-resistant. They feature a handlebar clamp and are designed to fit 12 V electrical systems.
Not Yet Reviewed
$203.36
Dakota Digital universal speedometer and tachometer interfaces deliver the functionality of three devices in one. These units can adjust/split/re-calibrate an electronic speed signal, calibrate a tach signal, and aid in the creation and adjustment of a gas tach signal for diesel swap applications. Features and benefits include: * Speed calibration from 25 percent to 400 percent * Multiple speed outputs available for multiple devices * Electronic pull-up built in; high or low voltage input * Tachometer settings from 1-16 cylinders and 5 V or 12 V signal type * Diesel applications: outputs for 4, 6, or 8-cylinder tachs * Bluetooth technology synchronizes unit to available mobile app for programming and setup * Built-in programming buttons and LED display for setup in lieu of app * Not for use with ABS sensors or systems
( 29 )
$128.25
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
