Free Shipping on Orders Over $125 at Summit Racing

Trick Flow® DHC™ 175 Cylinder Heads for Small Block Chevrolet

No longer will fans of the small block Chevy have to choose between vintage looks or modern cylinder head power—Trick Flow® DHC™ 175 cylinder heads give you both! Made from premium grade, lightweight A356-T61 aluminum, DHC™ 175 heads feature the exterior styling and straight spark plug holes that deliver the nostalgic appearance of the original factory performance 186, 291,461,462 "double hump" or "camel back" castings that customers want. To keep with the vintage design, the heads are available with 69' later or without 68' earlier accessory bolt holes cast into them. 60cc CNC-profiled combustion chambers combined with a state of the art valve job and CNC blended bowl work under the valves and small cross-section intake runners promote low-rpm torque increases and boost high-rpm horsepower. The runners are finished with Trick Flow's® superior Fast As Cast® process that precisely duplicates the runner profile and performance levels of fully CNC-ported heads without the added machining cost. Ductile iron valve seats for use with unleaded fuel, stainless steel valves, bronze alloy valve guides, multi-angle valve seat machining, and decks and walls cast extra thick for increased casting strength and to provide extra room for porting round out the features. Trick Flow® DHC™ 175 cylinder heads are available fully assembled or as bare castings. Sold individually.

4.81 out of 5 stars ( 21 )

$924.99

—

$949.99

Brodix Cylinder Heads IK 200 Cylinder Heads for Small Block Chevy

Brodix Cylinder Heads IK 200 cylinder heads for small block Chevys will give you big-time performance. Made from revolutionary lightweight castings, these virgin aluminum, fully assembled cylinder heads are specifically designed for optimum versatility. Features: * 200cc intake ports * 64cc or 70cc combustion chambers * Manganese bronze valve guides * Valve seats for use with unleaded gas * End-milled and drilled for accessories * 2.02 in./1.60 in. stainless steel valves * Valve springs * Valve stem seals * 5/16 in. guideplates * Rocker arm studs * Retainers * Locks

4.33 out of 5 stars ( 39 )

$1,493.99

Brodix Cylinder Heads IK 180 Cylinder Heads for Small Block Chevy

Brodix IK 180 cylinder heads for small block Chevys will give you big-time performance. Made from revolutionary lightweight castings, these virgin aluminum, fully assembled cylinder heads offer the following features: * 180cc intake ports and 64cc or 70cc combustion chambers * Manganese bronze valve guides * Valve seats for use with unleaded gas * End-milled and drilled for accessories * 2.02 in./1.60 in. stainless steel valves * Valve springs * Valve stem seals * 5/16 in. guideplates * Rocker arm studs * Retainers * Locks

4.61 out of 5 stars ( 31 )

$1,355.99

—

$1,493.99

Trick Flow® DHC™ 200 Cylinder Heads for Small Block Chevrolet

Build the ultimate classic-looking hi-po Chevy small block with Trick Flow® DHC™ 200 cylinder heads. Patterned after Trick Flow's popular DHC™ 175 as-cast heads, DHC™ 200 heads get the full CNC-ported treatment to substantially ramp up power production. New 64cc CNC-profiled combustion chambers with 2.055 in. intake valves and CNC Street Ported runners promote big increases in high-RPM horsepower and torque. Bronze alloy valve guides, ductile iron valve seats, and stainless steel valves ensure excellent durability, while proprietary valve profiles and multi-angle valve seat machining maximize flow at low lift. Extra thick decks and walls increase casting strength for peace of mind in demanding conditions. Chromoly steel retainers, 7-degree machined steel valve locks, factory intake and exhaust port locations, and your choice of Trick Flow by PAC Racing valve springs are also standard. As with all Trick Flow® cylinder heads, DHC™ 200 heads are cast from A356-T61 aluminum to keep weight low. To preserve the vintage theme, exterior touches like straight spark plug holes, castings with or without accessory bolt holes, and other OE double hump head styling cues deliver the traditional look you're going for. Sold individually.

5.0 out of 5 stars ( 2 )

$949.99

—

$1,299.99

PROMAXX Performance Freedom Series Small Block Chevy Cylinder Heads

PROMAXX Performance Freedom Series small block Chevy cylinder heads offer exceptional quality at an unbelievable price. Manufactured from high-quality aluminum, they are assembled with the finest components. Freedom Series cylinder heads feature one-piece stainless steel intake and exhaust valves, enhanced intake runners, and performance valve springs with steel retainers. They're available in straight or angle plug designs. Horsepower costs money. With Freedom Series small block Chevy cylinder heads, PROMAXX Performance offers you the opportunity to bolt on the power that you've been looking for, at the price you want.

4.23 out of 5 stars ( 65 )

$1,101.00

—

$1,179.00

Summit Racing™ All New 300 HP Small Block Chevy 350 Crate Engines

These Summit Racing™ 350 small block Chevys are 100% new, including their blocks! No remanufactured parts are used to build these engines. They are built with new Vortec head castings that are not prone to cracking like the factory ones, and produce a reliable 300+ horsepower/375+ lbs.-ft. torque, providing a mild muscle car tone. These engines are assembled for us by the guys at ATK, and backed with their 2-year unlimited mile warranty for peace of mind.

Not Yet Reviewed

$4,499.99

Trick Flow® Super 23® 215 Cylinder Heads for Small Block Chevrolet

Trick Flow® Super 23® 215 cylinder heads are a mainstay in the high-performance Chevy world. Based on the proven Super 23® head design, they're packed with power-building features like 215cc intake runners for strong mid- and high-RPM power, angled spark plugs, raised valve cover rails, and extra-thick walls for added durability. But progress never sleeps, so Trick Flow® developed an all-new Super 23® 215 cylinder head design that has a new and improved casting with a thicker 3/4" deck. Trick Flow® also added their top-of-the-line, CNC Competition Ported runner treatment with fully CNC-machined combustion chambers. This premium high-resolution surface finish delivers more airflow so that race-ready engines can reach even higher power numbers. You can get Super 23® 215 heads with one of two valve spring packages for different camshaft types and power levels. The standard 1.545" valve springs are perfect for most hydraulic roller cams. For more aggressive solid roller cam profiles, choose the optional 1.550" valve springs for proper control at high RPMs. Cylinder heads are available fully assembled or as bare castings. Sold individually.

5.0 out of 5 stars ( 1 )

$1,054.99

—

$1,399.99

Trick Flow® Ultra 18® 250 Cylinder Heads for Small Block Chevrolet

Take the 18 degree power leap! Ideal for drag and high-rpm circle track racing, Trick Flow® Ultra 18® 250 cylinder heads make serious horsepower right out of the box. In fact, the heads deliver higher airflow numbers than fully prepped 23 degree small block Chevy heads. These heads feature Trick Flow CNC-profiled combustion chambers and CNC Competition Ported runners with a premium high resolution surface finish for maximum flow and performance. The heads accept most current 18 degree intake manifolds, headers, and other components. They require the use of offset shaft-mounted rocker arms and a mechanical roller camshaft with offset intake lifters. Trick Flow® Ultra 18® cylinder heads are available fully assembled or as bare castings and sold individually.

Not Yet Reviewed

$1,599.99

PROMAXX Performance Maxx Series Small Block Chevy Cylinder Heads

Maximum quality, maximum performance, and minimum pricing--PROMAXX Maxx Series SBC cylinder heads take affordable power to the next level. With ultra-smooth Grade A 356-T6 aluminum castings that are precision CNC-machined, these small block Chevy heads deliver awesome air speeds with super-efficient chamber designs to produce the power and torque you need for the street or strip. Maxx cylinder heads feature 5-angle competition valve jobs, diamond-honed bronze guides, and hand bowl blending. Get out-of-the-box performance that kicks up the power without emptying your wallet--PROMAXX Maxx Series SBC cylinder heads.

4.35 out of 5 stars ( 23 )

$925.00

—

$1,193.00

Diamond Pistons Small Block Chevy Nitrous Series Pistons

Diamond Pistons offers small block Chevy Nitrous Series pistons for a wide range of engine and cylinder head applications from the late 1960s and up. These forged aluminum replacements are available in numerous bore, stroke, size, and other configuration options. The sets feature: * Forced pin oilers from the oil ring * Pin fitted * Vertical gas ports * 3-D dome and pockets * Designed for nitrous applications * H-13 pins, locks and support rails (if required) included

1.0 out of 5 stars ( 1 )

$134.00

On Sale

Summit Racing™ Cast Iron Cylinder Heads for Small Chevy

Think you have to scour the local bone yards to find a decent set of GM's old double hump or fuelie cylinder head castings? Not true. In fact, we've brought back classic Chevy performance in a big way with these ready-to-run heads for small block Chevy. Our versions of the popular GM cylinder heads offer great performance for less than it would cost to rebuild an old set of double hump castings.

4.79 out of 5 stars ( 130 )

$649.99

$499.99

AFR 200cc SBC Enforcer Cylinder Heads

AFR 200cc SBC Enforcer Cylinder heads feature their Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners and combustion chambers that allow for extremely accurate and repeatable port location/performance. These budget-friendly heads are perfect for your 350 to 400 cu. in. operating below 6,000 rpm. They come fully assembled with the identical components found in their higher end CNC-ported cylinder heads, such as ARP rockers studs, Melling Racing springs, Viton® valve seals, AFR adjustable guide plates, machined bead valve locks, hardened spring cups and ductile iron seats, and their one-piece 8mm 21 4N stainless steel valves. The AFR 200cc SBC Enforcer cylinder heads are available in straight or angle plug, assembled or bare.

5.0 out of 5 stars ( 2 )

$693.00

ATK High Performance GM 350 330 HP Stage 1 Long Block Crate Engines

Give your ride new life with ATK High Performance GM 350 330 hp/380 lbs.-ft. Stage 1 long block crate engines. These engines are based on the tried-and-true small block Chevy and are built to perform right out of the box. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, worn down engine or just looking for a little more performance, ATK has you covered. Stage 1 long block crate engines include: * Handpicked, remanufactured blocks * ATK cast iron cylinder heads * 76cc chambers * 165cc intake runners * 1.94 in./1.5 in. valves * Stamped steel 1.5 ratio rocker arms * OE crankshaft * OE 5.7 in. powder metal connecting rods * Hypereutectic flat-top pistons * Moly rings * Hydraulic flat tappet camshaft * 465 int./.488 exh. cam lift * 224 int./234 exh. cam duration at 0.50 * 9.1:1 compression * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube

3.69 out of 5 stars ( 16 )

$3,099.99

Chevrolet Performance Vortec Cylinder Heads

Chevrolet Performance cast iron Vortec cylinder heads will fit 1958 and later small block Chevy engines, and offer a 20 to 40 hp increase over earlier cast iron small block heads. Features include fast burn combustion chambers, and a high-velocity port design. They require the use of a Vortec-style intake and self-aligning rocker arms, and come complete with valves, springs, and retainers.

3.0 out of 5 stars ( 6 )

$795.65

—

$1,258.33

AFR 245cc NPP SBC Eliminator Racing Cylinder Heads

AFR 245cc NPP SBC Eliminator racing cylinder heads are their largest and most powerful 60/40 head for the small block Chevy. These competition-ported heads feature 100 percent CNC-machined intake runners, exhaust ports, and combustion chambers. With A356 aluminum castings and high-quality components throughout, these NPP—no pushrod pinch—units have extra machining for 3/8 in. pushrod clearance. AFR 245cc NPP SBC Eliminator heads are offered with stock or spread port exhaust, and steel or titanium retainers, as well as bare.

5.0 out of 5 stars ( 1 )

$3,685.00

AFR 235cc SBC Eliminator Competition Racing Heads

Stay ahead of the competition with high-flowing AFR 235cc SBC Eliminator Competition Racing heads. Intake ports, exhaust ports, and cylinder heads are 100 percent CNC-ported with finer machine levels and improved port-shaped details for optimum flow characteristics. AFR Eliminator Competition heads will satisfy your big displacement small block Chevy engine's need for more air—and to achieve additional cooling in the center of the head, spread port styles are offered. Eliminator Competition heads come complete and ready-to-run with AFR power-proven components—or choose "bare" (no parts) heads to create your own personal power package! Go with AFR cylinder heads—high performance components built for racers, by racers.

5.0 out of 5 stars ( 4 )

$3,489.00

On Sale

Summit Racing™ Vortec Cast Iron Cylinder Heads

Deliver power-building airflow to your engine with Summit Racing™ Vortec cast iron cylinder heads. These heads outflow the early model small Chevy heads with wide-open intake runners, efficient combustion chambers, and a high-performance valve job. They are made from a strong cast iron alloy that makes them less brittle than comparable Vortec heads on the market. For performance and great value, select the Summit Racing™ Vortec cast iron cylinder heads preferred for your build.

4.58 out of 5 stars ( 76 )

$649.99

$499.99

—

$549.99

AFR 195cc SBC Enforcer Cylinder Heads

AFR 195cc SBC Enforcer Cylinder heads feature their Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners and combustion chambers that allows for extremely accurate and repeatable port location/performance. These budget-friendly heads are perfect for your 350 to 400 cu. in. operating below 6,000 rpm. They come fully assembled with the identical components found in their higher end CNC-ported cylinder heads, such as ARP rockers studs, PAC Racing springs, Viton® valve seals, AFR adjustable guide plates, machined bead valve locks, hardened spring cups and ductile iron seats, and their one piece 8mm 21 4N stainless steel valves. The AFR 195cc SBC Enforcer cylinder heads are available in straight or angle plug, assembled or bare.

4.95 out of 5 stars ( 22 )

$417.00

—

$643.00

AFR 220cc SBC Eliminator Racing Heads

Race-ready AFR 220cc SBC Eliminator racing heads feature 100 percent CNC-ported intakes with greater detail. They also come with 100 percent CNC-ported combustion chambers and 80cc exhaust ports with a 3/4 in. thick head deck (ideal for nitrous or blower applications). Standard valves are lightweight 8mm, 2.080 in. intakes and 1.600 in. exhausts with AFR's hardened ductile iron interlocking valve seats. The valve springs included are intended for use on roller camshafts. They also offer exceptional flow characteristics, a 23 degree valve angle, and standard valve spacing. These cylinder heads are perfect for 350 to 400 c.i.d. engines in bracket drag cars, sportsman oval trackers, and highly modified street-class cars operating between 3,000 and 7,500 rpm (higher rpm ranges are possible, depending on the combination of parts).

4.59 out of 5 stars ( 22 )

$2,368.00

—

$2,994.00

ATK High Performance GM 350 330 HP Stage 3 Long Block Crate Engines

Give new life to your ride with ATK High Performance GM 350 330 hp/380 lbs.-ft. Stage 3 long block crate engines. They are based on the tried-and-true small block Chevy and are built to perform right out of the box. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, tired engine or just looking for a little more performance, ATK has you covered. Stage 3 long block crate engines include: * Handpicked, OE remanufactured blocks * ATK cast iron cylinder heads * 76cc combustion chambers * 165cc intake runners * 1.94 in./1.5 in. valves * ATK dual plane Intake manifold * OE crankshaft * OE 5.7 in. powder metal connecting rods * Hypereutectic flat-top pistons * Hydraulic flat tappet camshaft * .465 int./.488 exh. cam lift * 224 int./234 exh. cam duration at 0.50 * 9.1:1 compression * Distributor, spark plugs, and plug wires * Valve covers * Timing cover and double roller timing set * Oil pan, pump, and pickup tube * OE style long water pump * Balancer and 168 tooth flexplate

3.63 out of 5 stars ( 8 )

$4,754.99

AFR 195cc SBC Eliminator Street Heads

AFR 195cc SBC Eliminator Street Heads are fully CNC-machined (combustion chamber, intake, and exhaust ports) and available in your choice of straight or angled plug versions. AFR 195cc heads feature a 75cc or 65cc combustion chamber with a 64cc exhaust port and a 3/4 in. thick head deck (ideal for nitrous or blower applications). Standard valves are lightweight 8mm, 2.050 in. intakes (competition versions are 2.080 in.) and 1.600 in. exhausts with AFR's hardened ductile iron interlocking valve seats. The valve springs included are intended for use on roller camshafts. The exceptional flow characteristics of AFR 195cc Eliminators, a 23 degree valve angle, and standard valve spacing make them the perfect street heads for 350 to 400 c.i.d. engines in the 2,000 to 6,500 rpm operating range. They carry CARB #D-250-2 when used on 1969-94 applications with the heat riser. Order the bare or assembled model recommended for your vehicle and engine.

5.0 out of 5 stars ( 40 )

$1,164.45

—

$2,126.00

World Products S/R Torquer Cylinder Heads

Bolt on a set of affordable World Products S/R Torquer heads and add some serious muscle to your small block Chevy—up to 30 horses over stock. The heads are available bare or assembled for a variety of applications. These cast iron heads feature: * Power-building 170cc intake runners * Dual-pattern raised, leak-free valve cover rails * Tapped for screw-in rocker arm studs * 2.02 in. intake/1.60 in. exhaust valves * Umbrella valve seals * 1.250 in. valve springs * 7 degree retainers and locks

3.0 out of 5 stars ( 2 )

$652.16

—

$891.04

AFR 210cc SBC Eliminator Racing Heads

AFR 210cc SBC Eliminator racing heads are available in two stages of performance. The race-ready version features 100 percent CNC-ported intakes—and 100 percent CNC-ported intakes with greater detail. They come with 100 percent CNC-ported combustion chambers and 80cc exhaust ports with a 3/4 in. thick head deck (ideal for nitrous or blower applications). Standard valves are lightweight 8mm, 2.080 in. intakes and 1.600 in. exhausts with AFR's hardened ductile iron interlocking valve seats. The valve springs included are intended for use on roller camshafts. The exceptional flow characteristics, 23 degree valve angle, and standard valve spacing make these the perfect cylinder heads for 350 to 400 c.i.d. engines in bracket drag cars, sportsman oval trackers, and highly modified street-class cars operating between 3,000 and 7,500 rpm (higher rpm ranges are possible, depending on the combination of parts). The 210cc aluminum cylinder heads are available for either standard or spread port exhausts, bare or assembled style.

4.81 out of 5 stars ( 16 )

$2,368.00

—

$2,916.00

AFR 195cc SBC Eliminator Competition Heads

AFR 195cc SBC Eliminator competition heads are fully CNC-machined (combustion chamber, intake, and exhaust ports) and available in your choice of straight or angled plug versions. These heads feature a 75cc or 65cc combustion chamber with a 64cc exhaust port with competition porting and a 3/4 in. thick head deck (ideal for nitrous or blower applications). Standard valves are lightweight 8mm, 2.050 in. intakes (competition versions are 2.080 in.) and 1.600 in. exhausts with AFR's hardened ductile iron interlocking valve seats. The valve springs included are intended for use on roller camshafts. The exceptional flow characteristics of the AFR 195cc Eliminators, a 23 degree valve angle, and standard valve spacing make them the perfect competition heads for 350 to 400 c.i.d. engines in the 2,000 to 6,500 rpm operating range. They carry CARB #D-250-2 when used on 1969-94 applications with the heat riser. Order the bare or assembled model recommended for your year/make and engine family.

4.67 out of 5 stars ( 3 )

$2,892.00

198 Results Found For "sbc iron heads"