Availability
Durable steel freeze plugs from Dart work like expansion plugs. As we all know, water expands when it turns to ice, and if the coolant in your vehicle doesn't have enough antifreeze protection, it can freeze and then crack the engine block. Dart freeze plugs are designed to pop out under such conditions to relieve the pressure on the block, thus protecting it against freeze damage.
( 11 )
$1.19
Dorman expansion plugs are conveniently designed aftermarket replacements for stripped plugs. A leak-proof fit and long service life are assured every time, due to high-quality standards and materials used in the manufacturing process. Dorman engine and camshaft expansion plugs are offered in multiple sizes, styles, and materials for precise fitment on countless makes and models. They're easy to install and available individually or in multi-pack sets.
( 74 )
$9.99
Dorman variable valve timing solenoids will restore the fuel efficiency and normal operation of your vehicle. These direct replacement solenoids are engineered from quality materials for a proper fit and years of effective performance. They easily plug into the electrical harness and come conveniently packaged with the installation gasket (where applicable). Maintain proper oil flow and pressure with Dorman variable valve timing solenoids.
( 27 )
$26.99
—
$605.99
Caspers Electronics camshaft position sensor adapter harnesses allow the cam sensor used on the front of a LS2 motor to be plugged into the LS1 cam sensor connection located at the back of the intake manifold. These harnesses are perfect for LS2 motor conversions—and are compatible with the PCM harness in LS1 Corvette and F-Body cars. They are fully plug-and-play with factory connector and sensor. The high-temperature nylon loom remains flexible, while not melting sitting on top of the motor.
( 7 )
$29.79
Upgrade your entire cam chest with S&S Cycle Milwaukee 8 chain drive cam chest kits! The parts in each kit are matched to ensure superior quality, fit, finish, and performance, and will include the necessary gaskets, components, and hardware required for a complete installation. S&S Cycle chain drive kits are available for water-cooled and oil-cooled motorcycle models. Select the kit designed to fit your bike. Features of Milwaukee 8 chain drive cam chest kits: * Oil pump and cam plate are precision-machined from billet aluminum with a blue anodized finish * Passage plugs are removable for servicing * Independent scavenge sections for the flywheel cavity and cam chest * Debris screens in both scavenge pickups * Magnet in cam helps stop debris from entering oil pump * Increased oil flow capacity on both the feed and scavenge sides * Adjustable pressure relief valve is adjustable with the unit installed in the engine * S&S Quickee pushrods with chrome or gloss black pushrod tubes * S&S premium tappets—hand assembled to exacting tolerances; reduced valve train noise from start up to shut down * Billet aluminum tappet cuffs have a hard-anodized black coating and are stronger than stock to eliminate distortion and improves tappet stability in high-lift situations * Precision machined billet aluminum cam chain tensioner * 465 Torque cam kits are the ideal choice for Touring bike applications * 475 kits are bolt-in cams that can produce up to 100 horsepower * 540 kits are designed to add even more stump pulling torque to your big bore M8, for those that keep the revs below 6,000 rpm—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift * 550 kits are for use with large displacement engines—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift
Not Yet Reviewed
$1,580.95
—
$1,937.95
S&S Cycle Milwaukee 8 gear drive cam chest kits include everything necessary to convert to gear drive for improved cam timing accuracy and eliminate the stock cam chain tensioner. All parts in each kit are matched to ensure superior quality, fit, finish and performance. Each kit includes necessary gaskets, components, and hardware required for a complete installation. S&S gear drive kits are available for water-cooled and oil-cooled motorcycle models. Select the kit designed for your bike. Features of Milwaukee 8 gear drive cam chest kits: * Oil pump and cam plate are precision-machined from billet aluminum with a blue anodized finish * Passage plugs are removable for servicing * Independent scavenge sections for the flywheel cavity and cam chest * Debris screens in both scavenge pickups * Magnet in cam helps stop debris from entering oil pump * Increased oil flow capacity on both the feed and scavenge sides * Adjustable pressure relief valve is adjustable with the unit installed in the engine * S&S Quickee Pushrods with chrome or gloss black pushrod tubes * S&S premium tappets—hand assembled to exacting tolerances; reduced valve train noise from start up to shut down * Billet aluminum tappet cuffs have a hard-anodized black coating and are stronger than stock to eliminate distortion and improve tappet stability in high-lift situations * Outer drive gears included * 465 Torque cam kits are the ideal choice for Touring bike applications * 475 kits are bolt-in cams that can produce up to 100 horsepower * 540 kits are designed to add even more stump pulling torque to your big bore M8, for those that keep the revs below 6,000 rpm—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift * 550 kits are for use with large displacement engines—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift
Not Yet Reviewed
$1,774.95
—
$2,172.95
Mopar Replacement variable valve lift solenoids are affordable, reliable, and built to last. They're also a smart choice to keep your Chrysler, Dodge, Plymouth, Ram, or Jeep running smooth and efficiently. At moderate speeds the valves operate at low lift—but when the driver calls for more power, the high valve-lift phase is activated by these solenoids. The genuine OE replacements provide the proper function, as well as the right fit (front and/or rear) to make your install hassle-free. Order the model designed for your specific vehicle application.
Not Yet Reviewed
$112.99
—
$115.99
Standard Motor variable cam timing solenoids are direct-fit OE replacements for your vehicle's original components. These solenoids effectively restores engine horsepower and torque curves while reducing emissions and improving vehicle efficiency. Standard variable cam timing solenoids have been manufactured to exceed OEM specifications for dependable, accurate, maintenance-free operation.
( 4 )
$51.99
—
$81.99
Spectra Premium variable valve timing solenoids are OE replacements that ensure ease of installation and factory-style performance. They are responsible for changing the position of the camshafts in the engine. Each camshaft or head is equipped with a VVT solenoid—which is capable of altering the supply of oil pressure to the camshaft or valve follower, depending on the speed and load of the engine. These solenoids are made of high-quality materials to withstand extreme conditions; they undergo extensive testing to ensure reliability. Order the direct-fit replacements recommended for your application.
Not Yet Reviewed
$87.99
NTK engine variable valve timing solenoids are manufactured to meet the demands of today's VVT engines at both low and high rpms. The solenoids are individually tested to ensure consistent quality, with end of production tested in oil to ensure the valve is primed to work properly upon installation. Order the model recommended to fit your vehicle. Additional VVT solenoid features: * Manufactured to precise OE valve body dimensions and utilizes fluorocarbon O-rings to help prevent oil leakage * High-strength thermoplastic for resistant to temperature, moisture and chemicals * Precision-wound, copper-coated windings help increase solenoid longevity * Hard-coated anodized spool valve prevents corrosion for lasting service
Not Yet Reviewed
$73.99
MotoRad Variable Valve Timing solenoids perform under extreme operating conditions while restoring fuel economy and reducing emissions. Engineered to withstand multiple oil formulas and contamination, MotoRad's VVT solenoids are designed at their ISO TS76949 manufacturing facilities to meet or exceed OEM specifications. Choose the solenoid design for your vehicle.
Not Yet Reviewed
$79.99
BluePrint Engines Ford 302 c.i.d. 361 HP dressed long block crate engines are ideal for daily drivers and cruising. Fully dressed, these engines makes up to 16 in. of vacuum and will work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel. Details and specs: * 361 hp/334 lbs.-ft. * Compression Ratio: 9.4:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision Rotating Assembly: * 3.000 in. stroke * OEM type 5.090 in connecting rods * Hypereutectic pistons * 50oz external balance Cylinder Heads: * BluePrint aluminum cylinder heads (HP9008) * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 190cc intake/60cc exhaust runners Roller Cam specs: * .533 intake/.544 exhaust * 215 intake/220 exhaust duration @ .050 - 114-degree lobe separation Ignition timing: * 10-16 degrees initial, 32-34 total Also includes (depending on part number): * Valve covers * Timing cover * Carburetor or Throttle Body * Spark plugs and wires * Distributor * Intake * Harmonic balancer * Dyno test results shipped with engine Note: Engine requires a V-belt standard rotation water pump and belt system. Timing cover is designed for standard rotation water pump only.
( 8 )
$6,649.00
—
$10,199.00
Maintaining proper wheel alignment is not only fundamental in extending the tread life of your tires, it also helps you to safely control the vehicle. Moog cam bolt kits are designed to assist with camber and toe-related issues, returning the vertical angles to OE specifications or allowing you to make adjustments for more precise handling than that provided by the factory settings. Moog adjustment hardware kits afford you improved alignment, longer part life, and ease of installation.
( 15 )
$541.99
BluePrint Engines offer the power to start your build with. Their Pro Series Chevy 598 c.i.d. 724 hp base long block crate engines will be the foundation for your performance. And to ensure success, they also offer their 30 month/50,000 mile warranty. Start your engines! BluePrint Pro Series Chevy 598 specs: Block: * New BluePrint 598 BBC * One-piece rear main seal * 4-bolt main * 4.595 in. bore Rotating assembly: * Forged crank, piston, and rods * Piston rings * Hydraulic roller cam Cylinder heads: * BluePrint aluminum, 117cc chamber * Pushrods * Rocker arms Cam Specs: * .647 intake/.647 exhaust * 258 intake/266 exhaust duration * @ .050—112 degree lobe separation Ignition Timing: *38 degree total timing Also Includes: * Valve covers, oil pan, and timing cover * Oil pump * Champion spark plugs * Dyno test results shipped with engine * 1,050 cfm Carburetor * MSD Distributor * Aluminum Single Plane intake manifold
( 2 )
$14,749.00
Satisfy your craving for horsepower with BluePrint 347 c.i.d. 415 hp base stroker long block crate engines. They are meticulously-built Blue Oval engines from a solid, reputable company that does the job right and stands behind their work. BluePrint custom-built crate and stroker performance engines are always balanced and dyno-tested to add a lot of muscle to your fun! Plus, they're shipped with the dyno results so you can see the BluePrint difference! So, where will you get your horsepower from? Block: * Hand-picked, seasoned blocks bored .040 over * Square and parallel decked * Align-honed main bearing bore * Cylinders honed on computer-controlled machine to within .0002 in. straightness and roundness * Cylinders are sonic tested for thickness Rotating assembly: * New cast crankshaft * New rods with 150,000 psi bolts * Forged pistons * Moly rings * Balanced rotating assembly * High-volume oil pump * Hydraulic roller camshaft * Heavy-duty, double-roller timing set Cylinder heads: * Aluminum heads * Swirl-polished intake and exhaust valves * Hardened pushrods Plus: * 10 to 1 compression * Valve covers * Painted oil pan * Brass freeze plugs
( 3 )
$7,199.00
BluePrint Engines Ford 302 c.i.d. 361 HP EFI dressed long block crate engines are ideal for daily drivers and cruising. Fully dressed, these engines makes up to 16 in. of vacuum and will work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel. Details and specs: * 361 hp/334 lbs.-ft. * Compression Ratio: 9.4:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision Rotating Assembly: * 3.000 in. stroke * OEM type 5.090 in connecting rods * Hypereutectic pistons * 50oz external balance Cylinder Heads: * BluePrint aluminum cylinder heads (HP9008) * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 190cc intake/60cc exhaust runners Roller Cam specs: * .533 intake/.544 exhaust * 215 intake/220 exhaust duration @ .050 - 114-degree lobe separation Ignition timing: * 10-16 degrees initial, 32-34 total Also includes: * Front sump oil pan * Valve covers * Timing cover * EFI * Standard rotation water pump * Spark plugs and wires * Distributor * Intake * Harmonic balancer * Dyno test results shipped with engine
Not Yet Reviewed
$7,699.00
—
$10,199.00
The most popular crate engine size just got better and easier with Ford Performance Parts X2347 Street Cruiser dressed long block crate engines. The proven 347 stroker combination has been optimized for street cruising with a perfectly matched cam/cylinder head/intake manifold/carburetor combination that runs on pump gas. Guesswork and installation issues are eliminated with a complete intake and distributor package that has been developed and tested by Ford Performance engineers. The X2347D engines are hand-assembled and dressed out with the best aftermarket performance parts translating into 360 hp and 400 lb.-ft. of torque at the crank! Ford Performance X2347 main features: * 4.030 in. bore and 3.400 in. stroke * Boss 302 8.2 in. deck height block * SCAT forged steel crankshaft * SCAT forged steel I-beam connecting rods * Forged Mahle pistons with floating wrist pins * Ford Performance aluminum, 64 cc chamber cylinder heads * 1.94 in. intake valves, 1.54 in. exhaust valves * 9.6:1 compression ratio * Edelbrock Performer RPM Air Gap manifold * Holley Street Avenger 570 cfm carburetor * 1.6:1 ratio roller rocker arms * Ford Racing black satin aluminum valve covers * MSD billet distributor * Ford Racing 9mm black spark plug wires * Hydraulic roller Comp Cams .533 in. lift intake and exhaust with 206 degree duration intake and exhaust at .050" lift * Double roller timing chain set * Ford Racing SFI-approved harmonic damper * High performance front or rear sump 7-quart capacity oil pan with windage tray and scraper * Maximum recommended rpm: 6,000 rpm * Internal balance; use neutral balance flywheel
Not Yet Reviewed
$12,555.00
—
$14,029.71
Dakota Digital GRFX Series backup cameras allow you to add reverse backup video to your GRFX System, with a simple plug-in connection! Both the CAM-1000 and CAM-2000 offer an expansive 170-degree horizontal view, giving you great visibility behind the vehicle while backing up. Wired connection from the camera will be routed to the GRFX instrument system, plugging directly into the rear side of the display panel. 29-feet of cable length will stretch through the longest of vehicles with ease. The CAM-1000 is a surface-mount camera which allows a flexible mounting angle in many locations at the rear of the vehicle. This tiny camera measures .830 in. in both length and width and 1.100 in. deep. The pivoting mounting bracket has a footprint of 1.400 in. x .790 in. Double-sided tape is attached to the bracket for mounting—or utilize the included screws for a permanent installation. CAM-2000 is a flush-mount camera, designed to really disguise the installation. This requires a .740 in. cutout (and includes a perfect-fit holesaw) and has a .900 in. overall bezel diameter. The CAM-2000 is a tidy 1 in. deep and even includes a surface mounting housing and bracket, if you opt to not place this camera through the surface. (Note: CAM-1000 can be added to a license plate bracket for easy installation. CAM-BKT-1 is available separately)
( 1 )
$123.50
BluePrint Engines 350 c.i.d. Cruiser fully dressed crate engines make an great choice for daily drivers and cruising. These fully dressed engines make up to 18 in. of vacuum and work excellent with power brakes, stock torque converter and stock gearing and they will run on 87 octane fuel. Details and specs: * 341 hp/371 lbs.-ft. * Compression Ratio: 9.2:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating Assembly: * Cast iron crankshaft * 3.480 in. stroke * Forged 5.700 in. connecting rods * Hypereutectic pistons * Internal front/external rear engine balance Cylinder Heads: * BluePrint aluminum cylinder heads (H8002K) * 64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners Roller Cam specs: * .477 intake/.471 exhaust * 202 intake/212 exhaust duration @ .050 - 115-degree lobe separation Ignition timing: * 32 degrees total at 3,500 rpm Also includes: * Valve covers * Harmonic balancer * Spark plugs * Spark plug wires * Standard rotation long style water pump * Waterneck and thermostat * Fuel pump * Oil pan * Timing cover * Aluminum intake * HEI distributor * 600 cfm carburetor * Dyno test results shipped with engine
( 28 )
$5,949.00
—
$7,899.00
With displacements up to 455 cubic inches, the Race Series small block Chevy aluminum bare blocks are an ideal starting point for any project that involves sprint cars, modifieds, late model stock, dragsters and unlimited competition classes. Incorporated features include: * Standard 9.025 in., tall deck 9.325 in. and 9.500 in. versions allow for greater versatility. * Raised camshaft .391 in. (4.912 in. camshaft to crankshaft centerlines) provides more clearance for stroker cranks and eliminates need for fragile small base circle cams. Option for .434 raised cam also available * Relocated oil pan rails are spread .400 in. per side (.800 in. wider than stock) to increase crank/rod clearance and reduce windage losses * Siamesed cylinders: Standard 4.000 in. or 4.125 in. cylinder can be safely bored to 4.185 in. (ductile iron sleeves and extr-thick walls prevent cracking and produce excellent ring seal * Oil pan bolt holes are relocated in line with main caps to eliminate interference with rotating assembly * Main bearing bores are available for 350 (2.45 in.) and 400 (2.65 in.) bearings allow engine builders to maximize crankshaft strength and minimize friction * 4 bolt billet steel main caps have splayed outer bolts minimize bearing bore distortion * Big block camshaft bearings allow use of cams with larger base circle diameter to improve strength and resist twisting with cam driven pumps * Dual starter mounts allow starter to be mounted on either side of block for chassis and oil pan clearance * Front and rear external oil inlets, crossover and restrictor provisions to simplify plumbing with external pump * Scalloped outer water jacket walls improve coolant flow around the cylinder barrels to equalize temperatures * Coated cam bearings, freeze plugs and dowels are included
Not Yet Reviewed
$6,999.99
—
$7,949.99
BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block crate engines are available with fuel injection—and base or deluxe carbureted models. SPECIFICATIONS FOR ALL MODELS INCLUDE: * HP and Torque: 390 hp / 410 lbs.-ft. * Compression Ratio: 9.2:1 * Aluminum Heads * Hydraulic Roller Cam * Cast Iron Crankshaft * Hypereutectic Pistons * BLOCK: NEW BluePrint Cast Iron Block Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Passenger Side Dipstick Drilled and tapped for clutch linkage * ROTATING ASSEMBLY: Cast Iron Crankshaft 3.480 in. Stroke Forged 5.700 in. connecting rods Hypereutectic pistons Internal Front/ External Rear engine balance * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 64cc chamber 2.02 in. intake/1.60 in. exhaust valves 195cc intake/75cc exhaust runners * CAM SPECS: Cam Type: Roller .495 Intake .502 Exhaust 220 Intake / 224 Exhaust duration @ .050 - 114 degree lobe separation * IGNITION TIMING: 32 Degrees Total at 3,500 rpm * ALSO INCLUDES: Valve covers Oil pan Timing cover Aluminum intake HEI distributor Dyno test results shipped with engine 30 month / 50,000 warranty INCLUDED ONLY WITH FUEL INJECTION MODEL BP3505CTF: * EFI system INCLUDED ONLY WITH BASE CARBURETED MODEL BP3505CTC: * 670 cfm carburetor INCLUDED ONLY WITH DELUXE CARBURETED MODEL BP3505CTCD: * Harmonic balancer * Spark plugs * Spark plug wires * Standard Rotation Long Style Water Pump * Waterneck and Thermostat * Fuel Pump * 670 cfm carburetor
( 9 )
$5,699.00
—
$6,749.00
ATK High Performance GM 350 Vortec 290 hp Stage 3 long block crate engines are perfect replacements for your worn out SBC. They are designed with matched components for reliable performance with extra "go power", and they require an electric fuel pump. ATK Stage 3 or complete dressed engines are engineered for those wanting to drop the engine into their project and fire it up. They have outfitted the engines as completely as possible to save you time and headaches. Typically ATK GM 350 Vortec 290 hp complete long blocks consist of: * OE block bored to 4.060 in. diameter with 2-bolt mains and a one-piece rear main seal * OE reground crankshaft with a 3.480 in. stroke * OE powder metal 5.7 in. length connecting rods * Hypereutectic 9.4:1 compression ratio pistons * Moly piston rings * Hydraulic roller camshaft (191/194 duration at 50, .414/.428 in. lift, 111 LSA) * Cast iron Vortec cylinder heads with 64cc combustion chambers, 165cc intake runners, and come with 1.94 in./1.5 in. valves. * Stamped steel 1.5 ratio rocker arms * Single roller timing set * 5 qt. oil pan ( will not fit Chevelle with steering behind crossmember, some Corvettes, and 1962-67 Chevy II) * Melling standard volume oil pump * Valve covers * Flexplate * ATK HP dual plane intake manifold * Distributor HEI * Cast iron long water pump * Front Powerbond balancer (internally balanced) * Pioneer externally balanced 168 tooth flexplate * Quick Fuel Brawler 670cfm carburetor * Autolite spark plugs (605) with 8mm wires
( 4 )
$3,625.99
Give your car or truck a little more punch with one of these ATK High Performance GM 350 Vortec 350 hp Stage 2 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure they are great-running, reliable engines that will get you back on the road. Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 *Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump Recommended components: * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine Info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers
( 8 )
$3,688.99
BluePrint Engines provides a Dyno Promise with results and bragging rights. They make sure they hit their target horsepower and proper torque with every crate engine, utilizing an advanced computerized balancer to get rotating assemblies within 2 grams, ensuring silky smooth power over the entire rpm range. According to BluePrint, that's precisely why their engines sound and run better than the competitors. Accompanying your BluePrint Engines Pro Series Chevy LS 376 c.i.d. 530 hp EFI base dressed long block crate engine will be a comprehensive, dyno-generated printout showing its critical specs. No more guessing what the real-world peak horsepower and torque ratings are. Any doubters in the crowd? Simply flash them your dyno results! These long block engines are available with or without complete engine controller with ECU, harness, throttle pedal, and sensors. Select the one you want. BluePrint Engines Pro Series Chevy LS EFI base dressed engine: * Horsepower and torque: 530hp/495 lb.-ft. * Compression ratio: 10.7:1 * BluePrint Engines LS3 aluminum cylinder heads -- 69cc chamber -- 2.165 in. intake/1.590 in. exhaust valves -- 259cc intake/102cc exhaust runners * Hydraulic roller camshaft: -- .612 intake/.585 exhaust lift -- 225 intake/238 exhaust duration at .050 in. -- 113-degree lobe separation angle -- 3-bolt cam * Nodular iron crankshaft -- 3.622 in. stroke -- 6.125 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * BluePrint Engines high-strength cast iron 6.2L block -- Increased deck thickness and strength webbing -- Extended cylinder skirt -- Priority main oiling -- 4.0662 in. bore -- 6-bolt main -- 1-piece rear main seal -- Improved water jacket design -- Utilizes OEM LS3 front and rear covers * LS swap oil pan * Harmonic balancer * DBW throttle body * Available with a GM plastic or fabricated intake manifold * Fuel injectors and rail * Coil packs * Spark plugs and wires * Water pump
( 1 )
$9,849.00
—
$13,749.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
