Free Shipping on Orders Over $125 at Summit Racing

Race Ramps FlatStoppers

Race Ramps FlatStoppers are designed to help keep your tires from flat spotting during long periods of storage. Once the tires are set in the FlatStoppers (on a level surface), they will settle into the pad's concave depression. More of the bottom portion of the tire will be fully supported, thus dispersing the weight of the car more evenly onto the tire and helping to prevent any flattening. The Race Ramps FlatStoppers will not conduct heat or cold to your tires, despite changing floor temperatures. They also won't slide or damage your floor in any way. Choose the wheel stand width that best suits your tires.

4.79 out of 5 stars ( 66 )

$223.44

—

$291.27

Rage Powersport Black Widow ProLift Heavy-Duty Air and Hydraulic Motorcycle Lift Tables

Rage Powersport Black Widow ProLift heavy-duty air and hydraulic motorcycle lift tables make it easy to service Harleys®, cruisers, and other large bikes from the convenience of your own garage. The 105.50 in. long by 24 in. wide table includes an oversized front tire wheel clamp and a full set of safety features to make it as easy as possible for you to load, secure, and lift your bike all by yourself. Loading your bike onto the table couldn't be easier: Just use the 20 in. long removable approach ramp to easily load your motorcycle onto the table; push the bike all the way into the adjustable wheel clamp to keep it upright while you tighten the wheel vise; and then attach safety straps from your motorcycle to the built-in tie-down point to secure your bike to the table. Now you're ready to raise the table to the desired height, from 7 in. to 31.25 in. high, with seven different safety lock positions. Other features include durable powdercoated steel manufacturing, a rear drop-out panel for easy access to wheels, and a foot pedal air pressure controlled lift (which requires 90-110 psi for proper operation).

4.67 out of 5 stars ( 6 )

$1,248.99

Rage Powersport Black Widow Motorcycle Jacks

Rage Powersport Black Widow motorcycle jacks lift the front or rear of a motorcycle from 3 3/4 in. to 16 1/4 in. off of the ground for maintenance, servicing, and cleaning. Black Widow motorcycle jacks are easily operated--simply fit them under the motorcycle engine block frame and turn the hex nut using the crank handle. Turning the handle in the opposite direction will lower the lift.

4.77 out of 5 stars ( 31 )

$87.99

Rage Powersport Black Widow Hydraulic Jacks

These Rage Powersport Black Widow hydraulic jacks are economical service jacks with high-end features. Black Widow hydraulic jacks feature simple foot pedal hydraulic operation, which allows for quick lifting anywhere. Rage Powersport Black Widow hydraulic jacks are designed to lift a motorcycle or ATV up to 1,500 lbs. for service, repair, cleaning, storage, or display.

4.1 out of 5 stars ( 20 )

$127.99

WeatherTech Easy Ramps

The WeatherTech Easy Ramps are designed to help pets of all ages access larger vehicles or higher areas that might normally be out of reach. They also help pet owners who are unable to lift their pets without risking injury to themselves or their furry friends. The ramp's heavy-duty construction supports up to 300 lbs., and the surface includes skid-resistant specialized traction pads, keeping your pet safe and secure. When not in use, the ramp quickly breaks down into two ramps and a central "stool" for easy portability. Each component is incredibly lightweight, and when fully assembled, the Easy Ramp weighs less than 21 lbs. Unlike shorter ramps, the WeatherTech Easy Ramp's specialized design provides an easier-to-use rate of incline (for most vehicles, the rate of incline will measure an easier 20-degree angle). Features, benefits, and specs: * Lightweight, Easy Ramp weighs less than 21 lbs. fully assembled, with each individual component weighing less than 8 lbs. * Features 3 components: 2 ramps and 1 central stool * The top of the ramp has a textured and skid-resistant surface to provide extra traction for your pet * The upper and lower ramps measures 42 in. long and 15 in. wide * The surface of the stool measures 10 in. long by 15 in. wide and stands 15 in. tall * Quickly and easily assembles, with both ramps securely locking into place in no time * Soft grippy feet on the ramps and the stool prevent the ramp from shifting on the ground or your vehicle * Heavy-duty—supports up to 300 lbs. * Quickly and easily assembles, with both ramps securely locking into place in no time * Soft grippy feet on the ramps and the stool prevent the ramp from shifting on the ground or your vehicle * Prevents back strain from lifting a dog into or out of your vehicle * Prevents injury to your dog from being lifted into or out of your vehicle * Durable and easy to clean—Easy Ramp won't rust or corrode * Designed, engineered, American-made quality the WeatherTech way!

5.0 out of 5 stars ( 2 )

$168.95

Race Ramps Trailer Steps

Race Ramps trailer steps are free-standing steps designed to make getting in and out of your trailer much easier. These lightweight, portable steps are also great to have around the shop or garage. Race Ramps trailer steps give you extra height to get under the hood of your big rig or to reach the top of your trailers when washing and detailing. They also make a nice bench to sit on while servicing your car when it's up on your Race Ramps or Wheel Cribs. A non-slip coating on all sides provides a safe standing surface. Race Ramps trailer steps have handy straps for carrying. Several sizes are available to meet your needs.

5.0 out of 5 stars ( 3 )

$197.51

Ranger RML-1500XL Motorcycle/ATV Lifts

If you're looking for lifting capacity and capability, the Ranger RML-1500XL Motorcycle/ATV lifts deliver! A long list of features includes an extended work platform, 12-gauge steel construction, built-in retractable swivel casters, reversible bolt-on side decks, a cheater ramp, automatic safety locks, support poles, and a single hydraulic lifting cylinder and retracting rear wheel deck. The RML-1500XL Motorcycle/ATV lifts are a combination of power, solid construction, and user-friendly features. While there are copycats everywhere, just because it looks like a Ranger doesn't mean it works like one or lasts as long. Ranger's RML-1500XL Motorcycle/ATV lifts are rugged and tough with the muscle to prove it! Features: * With little effort, you can easily position, secure, and raise motorcycles, bobbers, stretched choppers, trikes, and other wheeled and recreational vehicles with ease * Features 12-gauge welded-steel construction, a non-skid diamond-plate platform surface and full travel automatic safety locks that allow various working heights * Side decks can be easily removed to provide a more compact work area for closer access to bikes when performing maintenance work or cleaning detail * A humongous 1,500 lb. lifting capacity handles just about anything that rolls * Retractable, built-in, full-swivel casters provide stow-and-go capability even when loaded * Precision ball bearings improve rollability and are virtually maintenance-free * A gentle slope, textured diamond-plate approach ramps, and a secondary cheater ramp means even ground huggers can be loaded effortlessly * Lift gets its power from a potent commercial-grade hydraulic power system that produces big lifting muscle right off the ground—dual-function power unit provides either air or hydraulic pump operation * User-friendly controls increase productivity, reduce injuries, save money, and improve job satisfaction * A wide base frame combined with full perimeter tie-down rings provides a stable work environment ensuring bikes and choppers remain upright; tip-over concerns remain a thing of the past * Chrome alloy hydraulic cylinder provides smooth, controlled operation and an extended-stroke ram means the RML-1500XL stands tall for improved ergonomics * A rigid tubular-steel wheel vise provides better stability and features a hardened steel crank and ergonomic handle for fast and easy set-up. Durable non-slip rubber contact plates help protect expensive wheels. * A removable rear deck provides drop-down clearance and accessibility for wheel and suspension work * A secondary rear deck with built-in dyno-rollers makes easy work out of wheel rotations and turns your motorcycle lift platform into a motoring test simulator * Rear vertical support poles provide a secure and stable support for hoist straps, as well as tie-downs for elevated bike testing or other floating required services * A removable tool and parts tray can be positioned at multiple Quick-Lock positions located on the perimeter of the lift platform

1.0 out of 5 stars ( 1 )

$3,295.00

OEM Automotive Tools Air/Hydraulic Motorcycle Lifts

OEM Automotive Tools stack their air/hydraulic motorcycle lifts with features typically found on more expensive models. The heavy-duty, padded wheel vise, removable loading ramp, and tie-down rings make loading and securing your motorcycle a breeze. They easily lift motorcycles (up to 1,000 lbs.) nearly 30 in. with the convenient pump pedal. They can also be connected to shop air for even quicker lifting. Built-in casters with adjustable stabilizers let you quickly move and set it up anywhere to fit inside your garage or shop. Features for OEM tools air/hydraulic motorcycle lifts include: * Durable 12-gauge powdercoated diamond-plate deck * Wheel vise has a positive-stop feature * Rear wheel drop out panel * 86.5 in. x 26.75 in. platform deck with 25.5 in. long removable loading ramp * Maximum height: 29.5 in. * Minimum height: 7 in.

5.0 out of 5 stars ( 1 )

$2,499.00

Rage Powersport Black Widow Hydraulic Underbody Access Car Lifts

Black Widow hydraulic underbody access car lifts with ramps provide an easy-to-use solution to raising up the front or rear of your vehicle. Whether you need to perform a simple oil change, get under the vehicle to work on the exhaust system, or simply need better access to the underside of your car, these lifts offer a simple, stable alternative to jacking up your vehicle and setting it on jack stands. The ramped design allows you to drive up and onto the 6 in. lift platform, and a foot pedal raises the lift hydraulically to 15.5 in. Sold as a pair, these car lifts ensure ample access for oil changes, underbody work, and simple repairs—and together they support up to 3,000 lbs. Product notes: * Drive-up car lift ramps for oil/fluid changes, exhaust work, inspections, cleaning, as well as mechanical or underbody restoration work * Manufactured from steel with a black paint finish * Operating height is 6 in. at lowered height and 15.5 in. at raised height * Pair weighs 136 lbs. * An alternative to jack stands; suitable for professional or home use

3.88 out of 5 stars ( 8 )

$799.99

Tuxedo M-1000C Motorcycle Lifts

Tuxedo M-1000C motorcycle lifts are ideal for working on motorcycles, snowmobiles, ATVs, jet skis, and more. These air-powered lifts are capable of lifting up to 1,000 lbs. They feature a 30 in. working height and extra-large platform for keeping everything within reach while you work. Plus, you can choose from a range of accessories to customize the table to your preferences. Get your vehicle lifts from a company known for their commercial-grade reliability and toughness by ordering Tuxedo M-1000C motorcycle lifts. More product features include: * Choice of sliver powdercoated (M-1000C) or black powdercoated (M-1000C-BLK) finish * Minimum height – 7 in. * Overall length with ramp - 108 in. * Overall width with side extensions (sold separately) – 47 in. * Available accessories include side extensions, a motorcycle vice, a front extension, and a mini jack

Not Yet Reviewed

$1,376.99

—

$1,481.99

iDEAL Equipment Single Post Service Lifts

iDEAL Equipment single column service lifts are innovative 2,000 lb. single column, high-rise, multi-use storage and service lifts, incorporating a multi-adjustable platform design with multi-directional front and side vehicle loading for most ATVs, UTVs, golf carts, and riding and zero-turn mowers. The low-profile platforms incorporate spring-loaded quick-release/locking nylon rollers and brackets mounted to the underside of each platform, making adjustments of the platform's width fast and easy. Each platform is secured to the bolster via HD lock pins and retainer brackets once the desired platform width is set. For additional space saving benefits, the power unit can be easily mounted to either the front, side, or rear of column providing the best fit in your shop or garage. In addition, the iDEAL single column UTV and mower storage/service lifts come standard with a durable powdercoat finish, eight multi-position side ramps, wheel stop "pivot" ramps with protective nylon rollers, and quick removal tubular wheel stop bars for platform sides. Easy lift operation is provided with a high-quality electric/hydraulic 115V DURO power unit, a HD hydraulic chain-drive cylinder, and a single-point manual lock release with 20 different locking height positions.

Not Yet Reviewed

$4,890.00

iDEAL Equipment Electric/Hydraulic ATV Lift Benches

iDEAL Equipment electric/hydraulic ATV lift benches are up to the challenge of lifting all ATVs on the market today. Featuring a new and innovative retractable ramp system, with a pivot approach ramps that fold out of the way as the lift raises and become wheels stops. Keeping the safety of the technician in mind, a single point hand-held pendant controls lift bench functions for raising or lowering the platform, eliminating the need to use hands or feet to disengage manual safety latches. These features limit injury, while saving time and space, making your shop area more productive. Features and benefits: * Available in blue or black powdercoat finish * Lifting capacity 2,200 lbs. * Six locking positions * Extended length of 27.5 in. with full width approach ramp * Wheel stop * Overall length is 116.5 in. long, fully lowered * Platform is 88.6 in. Long x 50 in. wide * Maximum lift height 47.2 in. * 110 V integrated electric/hydraulic power unit

Not Yet Reviewed

$4,410.00

iDEAL Equipment Electric/Hydraulic Motorcycle Lift Benches

iDEAL Equipment electric/hydraulic motorcycle lift benches feature a new and innovative retractable ramp system, with a pivot approach ramps that fold out of the way as the lift raises. Keeping the safety of the technician in mind, a spring-loaded drop-down panel in the table provides easier access to the rear wheel for service, while a single point hand-held pendant controls lift bench functions for raising or lowering the platform, eliminating the need to use hands or feet to disengage manual safety latches. These features limit injury, while saving time and space, making your shop area more productive. Features and benefits: * Available in blue or black powdercoat finish * Lifting capacity 2,200 lbs. * Six locking positions * Extended length of 27.5 in. with full width approach ramp * Wheel stop * Overall length is 116.5 in. long, fully lowered * Platform is 88.6 in. L x 31.5 in. W * Maximum lift height 47.2 in. * 110 V integrated electric/hydraulic power unit

Not Yet Reviewed

$3,770.00

iDEAL Equipment Electric/Hydraulic UTV Lift Benches

Designed to fit the largest UTVs, iDEAL Equipment electric/hydraulic UTV lift benches feature a 2,200 lbs. capacity, along with a 65 in. x 88.6 in. platform. Featuring newly designed drive on pivot ramps that fold down and out of the way to become wheel stops. While an innovative retractable center ramp slides out of the way making for a safe, unobstructed workspace. Keeping the safety of the technician in mind, iDEAL Equipment electric/hydraulic UTV lift benches UTV side extensions incorporate innovative center drop panels providing unmatched service access, including motorcycle service, without removing the extensions. A single point hand-held pendant controls raising or lowering the bench, eliminating the need to use hands or feet to disengage manual safety latches. These features limit injury, while saving time and space, making your shop area more productive. Features and benefits: * Available in blue or black powdercoat finish * Lifting capacity 2,200 lbs. * Six locking positions * Extended length of 27.5 in. with full width approach ramp * Overall length is 116.5 in. long, fully lowered * Platform is 88.6 in. L x 65 in. W * Maximum lift height 47.2 in. * 110 V integrated electric/hydraulic power unit

Not Yet Reviewed

$4,920.00

Aeromotive VaporWorx DualX ZL1 Universal Fuel Module Controllers

Aeromotive VaporWorx PWM controllers for DualX ZL1 universal applications simplify installation and increase overall fuel system performance for dual OEM ZL1 fuel module applications. DualX uses a progressive ramping strategy with connections on the controller for the primary (pump 1) and follower (pump 2). The follower pump runs at lower duty cycle than the primary, allowing the follower pump to be on at all times, but at a lower average power, and allowing the pumps in the follower module to continually fill the reservoir with fuel, so it is ready to feed the engine under the most challenging conditions. As the primary pump increases in duty cycle, so does the follower, and once the primary is at 100 percent, the follower continues to increase to 100 percent duty cycle, as needed. This strategy is automatic and requires no user programming or adjustments. VaporWorx PWM DualX ZL1 fuel module controllers feature: * Everything needed electrically to drive the fuel pump module -- No relays, Hobb's switches, or filters needed -- OEM fuel level sensor can be used if desired * Unmatched low fuel level capability * Up to a 2/3 reduction in power to the fuel module during idle and cruise vs. traditional systems * 80-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * All cross-linked polyethylene wiring * Single 20 ft. wiring harness to the fuel module * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * Can be used in constant or manifold referenced fuel pressure modes -- Manifold referenced suggested to further reduce electrical demand

Not Yet Reviewed

$652.26

GUNI Wheel X 45 Universal Bolt/Lug Pattern Wheels

GUNI Wheel X 45 universal bolt/lug pattern wheels fit most standard cars, light trucks and SUVs with 4- or 5-bolt patterns and a max center hub of 76mm. These temp wheels feature solid steel construction with an airless polyurethane rubber thread. They're easy to mount and safe to install on all hub locations. GUNI Wheel X wheels are industry-wide tools that enable you to safely move vehicles in the shop or lot, easily rolling over hoses, grates, humps, and ramps. Applications and details: * Collision shops: Free up work bays when wheels are missing or out for repair; safely move vehicles off lifts and out of repair bays * Restoration and custom builds: Use as rollers to keep vehicles safely mounted to the wheel hub and fully mobile * Towing and recovery: Use on flatbeds for stolen wheels or flat jobs * Wheel repair: Eliminate vehicle damage caused by unstable or poorly positioned jack stands * Storage: Eliminate flat spots and dry rot for trailers, campers, and stored vehicles * Keep vehicles driveable and moving through the body repair process * Dramatically improve operating efficiency * Get rid of multiple spare tire racks in your shop or digging for trunk spares * Skinny compact design frees up work space around the hub * Stacks up neatly on racks and stands - no more multiple spares * Drivable up to 5 mph in the shop or lot * Specifications: -- Weight capacity: 2,500 lbs./1134 kg each -- Size: 22.5 in. D x 3 in. W -- Negative offset: 51mm -- Weight: 32 lbs. * Note: GUNI lug nut washers should be used with every installation

Not Yet Reviewed

$269.99

GUNI Wheel X 56 Universal Bolt/Lug Pattern Wheels

GUNI Wheel X 56 universal bolt/lug pattern wheels fit most trucks and large SUVs with 5- or 6-bolt patterns and a max center hub of 110mm. These temp wheels feature solid steel construction with an airless polyurethane rubber thread. They're easy to mount and safe to install on all hub locations. GUNI Wheel X wheels are industry-wide tools that enable you to safely move vehicles in the shop or lot, easily rolling over hoses, grates, humps, and ramps. Applications and details: * Collision shops: Free up work bays when wheels are missing or out for repair; safely move vehicles off lifts and out of repair bays * Restoration and custom builds: Use as rollers to keep vehicles safely mounted to the wheel hub and fully mobile * Towing and recovery: Use on flatbeds for stolen wheels or flat jobs * Wheel repair: Eliminate vehicle damage caused by unstable or poorly positioned jack stands * Storage: Eliminate flat spots and dry rot for trailers, campers, and stored vehicles * Keep vehicles driveable and moving through the body repair process * Dramatically improve operating efficiency * Get rid of multiple spare tire racks in your shop or digging for trunk spares * Skinny compact design frees up work space around the hub * Stacks up neatly on racks and stands - no more multiple spares * Drivable up to 5 mph in the shop or lot * Specifications: -- Weight capacity: 2,500 lbs./1134 kg each -- Size: 22.5 in. D x 3 in. W -- Negative offset: 51mm -- Weight: 32 lbs. * Note: GUNI lug nut washers should be used with every installation

4.0 out of 5 stars ( 1 )

$269.99

GUNI Wheel X 80 Universal Bolt/Lug Pattern Wheels

GUNI Wheel X 80 universal bolt/lug pattern wheels fit large trucks with 8-bolt patterns and a max center hub of 140mm. These temp wheels feature solid steel construction with an airless polyurethane rubber tread. They're easy to mount and safe to install on all hub locations. GUNI Wheel X wheels are industry-wide tools that enable you to safely move vehicles in the shop or lot, easily rolling over hoses, grates, humps, and ramps. Applications and details: * Collision shops: Free up work bays when wheels are missing or out for repair; safely move vehicles off lifts and out of repair bays * Restoration and custom builds: Use as rollers to keep vehicles safely mounted to the wheel hub and fully mobile * Towing and recovery: Use on flatbeds for stolen wheels or flat jobs * Wheel repair: Eliminate vehicle damage caused by unstable or poorly positioned jack stands * Storage: Eliminate flat spots and dry rot for trailers, campers, and stored vehicles * Keep vehicles driveable and moving through the body repair process * Dramatically improve operating efficiency * Get rid of multiple spare tire racks in your shop or digging for trunk spares * Skinny compact design frees up work space around the hub * Stacks up neatly on racks and stands - no more multiple spares * Drivable up to 5 mph in the shop or lot * Specifications: -- Weight capacity: 3,500 lbs./1588 kg each -- Size: 24.5 in. D x 3.5 in. W -- Negative offset: 60mm -- Weight: 43 lbs. * Note: GUNIWASHERS should be used with every installation

Not Yet Reviewed

$289.99

Performance Tool Grip Tape

Performance Tool grip tape provides a textured anti-slip surface to promote additional safety for otherwise slippery walkways, entries, steps, ladders, ramps, trailers, decks, and more. Great for either indoor or outdoor use in hot or cold environments all year long, this non-skid grip tape features a peel-away adhesive backing for easy application and non-residue clean up, plus, the tapes PVC based rubber backing resists water vapor, mild acids, gases, oils, alcohols, and other liquids. Additional grip tape features: * Strong adhesive works with concrete, metal, plastic, wood, tile, stone and laminate (not for use on uneven, rugged, rough, grimy, damp or dusty surfaces, including mud, sand, dirt or standing water) * Grip tape can be cut to desired length with utility knife or heavy-duty scissors * Tape is 2 in. wide, 192 in. in total length (50mm x 4870mm)

Not Yet Reviewed

$6.99

Steeda Quick-Release Clutch Quadrants

Replace that weak plastic clutch quadrant with Steeda's super-strong billet aluminum quick-release quadrants. The strong, flex-free billet quadrant design stands up to the hardest shifts. Steeda's billet clutch quadrants feature a fast-acting pedal ratio or steeper ramp to pull the clutch cable faster for quicker clutch release and reduced pedal travel. The increased pedal ratio also increases your pedal effort slightly, but the clutch releases more quickly, so the shift is over more quickly and you will not notice the increased effort.

4.5 out of 5 stars ( 2 )

$39.95

Redcat Racing 1:10 Scale Custom Trailers

Redcat Racing's Custom Trailer is an extremely detailed 1/10 scale car hauler trailer. This true-to-scale vehicle transport trailer is large enough to carry 1/10 scale vehicles and can be towed by most popular 1/10 scale RC vehicles. Included are a universal tow hitch, as well as a secondary hitch to be used with the Redcat Custom Hauler. The Custom Trailer is capable of carrying 1/10 scale vehicles up to 20 lbs., with its steel C-channel frame rails, heavy-duty leaf springs, and scale heavy-duty tires with stylish chrome wheels. The trailer includes scale details like a functioning storage box, rotating jack stand, extendable loading ramps, adjustable wheel chock blocks, and tie-down straps. All included accessories can be neatly stored on the trailer when not in use. The Custom Trailer has 14 LED-ready light buckets that are ready for the user to drop in the optional LED light kit (sold separately). Custom Trailers are ideal for use with Everest Gen7 Pro and Pro Sport, Everest 10, Clawback, and Gen8 Axe RC car models.

Not Yet Reviewed

$223.99

BendPak HD-9SW Super-Wide Car Stacker Parking Lifts

If you're looking for a little more lift and a lot less column interference, then BendPak's HD-9SW 9,000 lb. lifts are the answer. These super-wide 4-post lifts are designed to transform your garage into a state-of-the-art parking facility--turning that 2-car space into a 4-car trophy stand. The HD-9SWs are standard rise units with standard length runways. You can always count on BendPak lifts for increased durability, safety, and productivity. Spend less time worrying about what you're working under and more time doing with you love. Additional features include the following: * Standard rise * Shorter runway for smaller spaces * Runways accommodate wide or narrow vehicles * Runways include rail-kit for optional accessories * Electric/hydraulic power system * Single hydraulic cylinder mounted underneath runway * Fully enclosed lifting cables, safety locks, and sheaves * Internal anti-sway slider blocks in each column * Oversized self-lubricating cable rollers * Oversized sheave diameter reduces cable fatigue * High-speed lifting * Features heavy-duty 3/8 in. aircraft cable * Rugged 1 1/4 in. roller axles * Multi-position safety locks in each column * Adjustable lock ladders * Runways feature non-skid surface * Push-button pneumatic safety release * Independent backup slack-cable safety latches * Inside runways adjust for different tread widths * Customizable power unit location * Removable approach ramps for additional drive-under clearance

Not Yet Reviewed

$11,495.00

RAILBLAZA C-TUG Canoe and Kayak Carts

RAILBLAZA's C-TUG canoe and kayak cart isn't just a cart—it's your trail tank, your Sherpa, your secret weapon for getting off the beaten boat ramp. Engineered to haul kayaks, canoes, and gear-heavy rigs over sand, gravel, grass, and busted concrete, the C-TUG ditches flimsy frames for an ultra-tough, non-corroding polymer construction that's built to get scratched, slammed, and soaked. The puncture-free wheels never go flat, the reinforced axles take real-world punishment, and the tool-free assembly means it breaks down in seconds and stashes inside your hatch. The rubberized pads grip your hull like a vice, while the included straps keep things locked down tight on uneven terrain. Lightweight? Yeah. Tough? Yes. This isn't a toy. It's a gear-hauling, ramp-conquering, time-saving beast made for paddlers who'd rather spend their energy on the water—not dragging their ride to it. With the RAILBLAZA C-TUG canoe and kayak cart by your side, transportation has never been easier! Product features and details: * Reinforced UV-stabilized composite material * Thermo-bonded elastomeric hull pads * Stainless steel reinforced axles * 9 ft. strap with heavy-duty buckle * Dismantles in less than a minute * Fits inside kayak hatch * Tool-free assembly * Puncture-free wheels with hi-grip rubber tread * Lightweight at 12 lbs. and easy to handle * 260 lbs. static loading (capacity will vary with dynamic loading on different terrains) * Adjustable kick-stand

Not Yet Reviewed

$139.99

Aeromotive VaporWorx ReturnX Return-Type Pulse Width Modulation Controllers

Aeromotive VaporWorx ReturnX return-type PWM controllers have everything needed to provide a standalone fuel pump speed control system. Available for single or dual pump, naturally aspirated or supercharged applications, no switches, relays, or Hobb's switches are needed when using these ReturnX systems. Controllers have primary and secondary output with the primary providing sufficient pump speed to maintain fuel pressure during idle/cruise while the secondary pump follows at a lower duty cycle. This leader/follower arrangement delivers a smooth ramp-up in pump speed until both pumps are at full output. For carbureted and EFI applications, simply attach the supplied standalone MAP sensor hose to a manifold vacuum source (naturally aspirated) or past the supercharger/turbocharger and make at-idle controller adjustments--the VaporWorx controller will do the rest. Select the single or dual naturally aspirated or supercharged version needed for your setup. Key features: * Works with all brushed-type fuel pumps * Typical power reduction to the pump(s) of 45 to 75 percent * Standalone MAP-based fuel pump speed control * Carburetor and EFI capability Benefits: * Everything needed electrically to drive the fuel pump(s) * A significant reduction in the average fuel pump power requirement resulting in lower fuel temperatures and longer pump life * 40 to 80-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset will operate indefinitely without damage * Short circuit output protection will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating range -- Can be used with voltage boosters -- Lower than 10 V applied to the turn-on circuit will cause controller shutdown to protect from an AFR lean condition

5.0 out of 5 stars ( 2 )

$520.50

—

$652.26

26 Results Found For "ramp stands"