Free Shipping on Orders Over $125 at Summit Racing

Edelbrock Pro-Flo 4 EFI Systems

Edelbrock Pro-Flo 4 EFI systems provide you with a high performance traditional-style intake and 4150-style throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor (not included with LS kits) * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2-bar MAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.

4.07 out of 5 stars ( 135 )

$2,228.99

—

$3,239.95

Edelbrock Pro-Flo 4 XT EFI Systems

Edelbrock Pro-Flo 4 XT EFI systems provide you with a high performance Pro-Flo XT-style intake and 90mm throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 XT EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled XT intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2.5-bar TMAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.

4.44 out of 5 stars ( 25 )

$2,521.95

—

$2,969.95

Edelbrock Pro-Flo Series Air Cleaners

Edelbrock Pro-Flo Series air cleaners work with a variety of popular carburetors, including Performer Series, Thunder Series AVS, Holley, Thermo-Quad, Quadra Jet and Carter AFB, just to name a few. Knock-outs in the air cleaner base for use with Edelbrock crank case ventilation adapters (sold separately) are provided, depending on application. Pro-Flos offer multiple styles to match yours—and sizes for a proper fit. When you're looking for an ideal solution to your hood clearance problems, consider Edelbrock Pro-Flo Series air cleaners.

4.63 out of 5 stars ( 626 )

$39.95

—

$132.95

Edelbrock Pro-Flo 4 Fuel Pressure Regulators

Edelbrock fuel pressure regulator kits feature a unique design that allows them to be mounted directly to the fuel rail, instead of hunting for an alternate location in the engine bay. Featuring a compact push-in style design with a swivel-style mounting bracket, the regulators can be clocked in various directions to fit your setup.

3.81 out of 5 stars ( 16 )

$115.95

—

$131.99

Edelbrock Pro-Flo High-Flow Series Air Cleaners

Add both style and performance to your ride with Edelbrock Pro-Flo high-flow air cleaners. They feature a color-matched breathable lid and 3 in. tall element. Pro-Flow air cleaners fit all popular 5 1/8 in. diameter carburetors and include a black anodized Edelbrock script "E" nut. Each filter assembly features Edelbrock's washable Pro-Flo air filter with the exclusive Pro-Charge clean strip for easy maintenance and come pre-oiled for easy installation.

4.72 out of 5 stars ( 186 )

$154.95

—

$159.99

Edelbrock Pro-Flo 4 Ignition Coils

Edelbrock Pro-Flo 4 ignition coils are designed for use with electronic ignitions and produce an impressive 45,000 volts of power. Edelbrock kept the standard cylinder shaped housing and even gave it a satin black finish, so it will look right at home under the hood of your hot rod. These coils are an ideal complement to Edelbrock Pro-Flo 4 EFI systems.

2.13 out of 5 stars ( 15 )

$54.99

Edelbrock Pro-Flo 4 Engine Control Units

For those running a Pro-Flo 4 or Pro-Flo 4 XT on your vehicle, Edelbrock now offers a replacement ECU. Edelbrock Pro-Flo 4 engine control units are a new service item for customers who need to replace a damaged original or would like to carry an additional ECU as a spare. Order the model designed for your fuel injection kit application.

5.0 out of 5 stars ( 7 )

$599.99

On Sale

Fragola Performance Systems Series 2000 Pro-Flow Hose Ends

Manufacturing plumbing parts for the performance aftermarket is serious business, at least to the people at Fragola. Long hours and the belief that hose ends are more than "simple devices" have led to the production of what they believe to be the finest pieces available. Fragola's one-piece Series 2000 Pro-Flow hose ends eliminate brazed joints for better flow and incorporate two Viton® O-rings for leak-free service for the life of the fittings. These Pro-Flow hose ends feature a "single nipple" system whereby the socket draws the hose over the nipple and seals it by crushing the hose between the socket and the nipple. Since there is no cut hose to remove, the Series 2000 hose ends are easy to reinstall on a new piece of hose. Fragola Series 2000 Pro-Flow hose ends are crafted from aerospace-quality aluminum that's machined to mil-spec tolerances. They're then "bright dipped" instead of anodized to maintain the original finish and continue to look great over time. Series 2000 Pro-Flow hose ends from Fragola are American-made in several sizes and angles to meet your needs.

4.57 out of 5 stars ( 230 )

$8.99

—

$25.99

$8.54

—

$24.69

Edelbrock Pro-Flo 4 Distributor Rotors

Edelbrock Pro-Flo 4 distributor rotors are designed as direct replacements for the rotor that came with your Pro-Flo 4 ignition system's distributor. When rotors are worn out they can cause the engine to misfire or not start. Edelbrock Pro-Flo 4 distributor rotors will get your vehicle running again.

5.0 out of 5 stars ( 7 )

$19.99

Edelbrock Pro-Flo 4 and Max-Fire Ford 289-347 and 351W Distributor Gears

Edelbrock Pro-Flo 4 and Max-Fire Ford 289-347 and 351W distributor gears are specifically designed for Pro-Flo 4 and Max-Fire distributors in engines that are running a steel-core hydraulic roller camshaft. Made from steel, these distributor drive gears are an optional replacement part for the iron gear that comes installed with the distributor. Edelbrock also marks these distributor drive gears with a yellow painted dot for easy identification.

Not Yet Reviewed

$36.99

Edelbrock Pro-Flo 4 Plus Self-Learning Engine Management Systems

Edelbrock Pro-Flo 4 Plus systems simplify EFI for the "Big Three"! These ingenious engine management systems support late model Ford Coyote, Chevrolet LS, and Mopar Gen III Hemi engines, along with all their performance benefits in hot rod transplant applications. Each package consists of an ECU, wiring harness, and a 7 in. wireless touch screen tablet for programming, calibration adjustments, and monitoring performance. All systems are plug-and-play and are supported by a standalone Edelbrock Android app "E Tuner 4 Plus" specific for Pro-Flo 4 Plus applications. There is no laptop tuning required, base calibrations are provided, the systems are self-learning, and you can expect great out-of-the box performance. Edelbrock Pro-Flo 4 Plus systems feature: * Full VCT control of Coyote and Gen III Hemi engines with no add-on modules * Controls up to two drive-by-wire throttle bodies (LS applications) * Dual on-board wideband oxygen sensors with left and right bank closed loop AFR control using Bosch LSU4.9 sensors * Knock control using OEM sensors to provide knock feedback (harness sold separately) * High impedance injector drivers * E-Tuner PLUS simplified tuning interface. Tune wirelessly with Bluetooth using an Android device * Refined base calibrations with little or no tuning required. No costly dyno sessions required, just load a calibration and go! * Cosmetically appealing, fully terminated, modular wiring harness makes installation easy * Fully potted and weatherproof compact ECU design

4.0 out of 5 stars ( 1 )

$1,537.99

—

$2,451.95

Edelbrock Pro-Flo 4 EFI and Max-Fire Bronze Distributor Gears

Edelbrock Pro-Flo EFI and Max-Fire bronze distributor gears are designed specifically for Pro-Flo 4 and Max-Fire distributors. These drive gears are an optional replacement part for the iron gears that come installed on the Pro-Flo 4 and Max-Fire distributors. The bronze gears are intended for high performance and race applications which require distributor drive gears that conform to the camshaft gear. This type of gear is designed to be sacrificial and should be inspected regularly and replaced when worn.

Not Yet Reviewed

$64.99

Edelbrock Pro-Flo 4 EFI ECU and Electronics Kits

Edelbrock Pro-Flo 4 EFI ECU and electronics kits provide an economical, plug-and-play solution for enthusiasts who want to keep their existing EFI induction system (intake manifold, fuel rails, and accessories), but want the performance advantages of the Pro-Flo 4 EFI system. These kits include supporting sensors, a distributor, an ECU, wideband O2 sensor, wiring harness, and additional components for the specified application, and each EFI system has both fuel and spark control features. Components are controlled with iOS/Android E-Tuner software. More details: * ECU includes a learning capability feature that adjusts the fuel injection calibration to maintain the specified target air-fuel ratio * Minimal setup and tuning adjustments are required with Edelbrock's E-Tuner Software for IOS and Android tablets and cell phones * Software includes base calibrations for most applications and necessary adjustments for AFR target, ignition curve, idle speed, acceleration tuning, coolant fans, rev limiter, etc. Note: Customer must provide an induction system, including the manifold, throttle body, fuel rails, and injectors. Also, a fuel pump, regulator, and fuel lines are not included.

Not Yet Reviewed

$1,405.95

—

$1,428.95

Edelbrock Pro-Flo 4 LS Self Learning Engine Management Systems

Edelbrock Pro-Flo 4 LS self learning engine management systems include an engine control unit (ECU) and engine wiring harness designed to run Gen III LS engines equipped with a 24x reluctor wheel or Gen IV engines equipped with a 58x reluctor wheel. This kit is perfect for LS engine swaps where you still want to retain the factory intakes and injectors. These Pro-Flo 4 engine management systems are designed to give the same self-learning capabilities and functionality of Edelbrock's Popular Pro-Flo 4 EFI complete systems while maintaining the factory look. It is recommended to regularly check for firmware updates.

4.29 out of 5 stars ( 7 )

$1,210.95

—

$1,222.99

Edelbrock Pro-Flo 4 Plus Self-Learning Engine Management System Harnesses

Edelbrock Pro-Flo 4 Plus EFI self-learning engine management system harnesses are offered to support your specific configuration. With an eye toward making your hot rod transplant simple and successful, Edelbrock has created several add-on harnesses. They include LS drive-by-wire, knock sensor, a second oxygen sensor, and 2- or 4-wire LS alternators to radiator fan relay harnesses to complete and/or expand your base Chevy LS, Mopar Gen III Hemi, and Ford Coyote Pro-Flo 4 Plus EFI kits.

4.5 out of 5 stars ( 2 )

$34.95

—

$154.95

Edelbrock Pro-Flo 4 EFI Standalone ECU and Harness Kits

Edelbrock Pro-Flo 4 EFI standalone ECU and harness kits provide an economical, EFI solution ideal for legacy Pro-Flo EFI system users or those with an existing yet poor-performing competitor EFI system looking to convert to PF4 EFI. These kits can be used with any application for which Edelbrock offers a Pro-Flo 4 distributor. Each standalone kit includes ECU, supporting sensors, a wideband O2 sensor, and wiring harness. The ECU controls both fuel and spark, and includes a learning capability feature that adjusts the fuel injection calibration to maintain the specified target air-fuel ratio. Minimal setup and tuning adjustments are required with Edelbrock's E-Tuner Software for IOS and Android tablets and cell phones, and the software includes base calibrations for most applications and necessary adjustments for AFR target, ignition curve, idle speed, acceleration tuning, coolant fans, rev limiter, etc. Note: Customer must purchase a Pro-Flo distributor (specific to the application) and provide an induction system, including EFI manifold, throttle body, 1-bar MAP sensor, fuel rails, injectors, fuel pump, regulator, and fuel lines.

Not Yet Reviewed

$1,160.99

Edelbrock Pro-Flo 4 Fuel Pump Relay Kits

Edelbrock Pro-Flo 4 fuel pump relay kits were created to handle the high current that your EFI system needs to get the fuel from the tank to the engine. These relay kits help prevent voltage drops to ensure your fuel pump gets full voltage from your vehicle's battery to provide consistent fuel pressure to the regulator. These Pro-Flo 4 fuel pump relay kits are designed to plug into a Pro Flo system and come terminated with a fuse already inline.

3.67 out of 5 stars ( 3 )

$168.95

Edelbrock Pro-Flo 3 EFI Fuel Pressure Sensors

Edelbrock Pro-Flo 3 EFI fuel pressure sensors are top-quality replacements for use with the Pro-Flo 3 systems. Affordable and easy to install, these plastic/steel sensors have 1/8 in.-27 NPT threads and include a -6 AN fuel pressure take-off adapter fitting. The sensors help to ensure that your fuel pressure readings are accurate. No laptop is required for installation.

4.0 out of 5 stars ( 2 )

$92.95

CVR Proflo Maximum Water Pumps

CVR's Proflo maximum water pumps give you the flow that you need without costing you horsepower. CNC-machined from T6-6061 billet aluminum, these lightweight pumps have a direct-drive 12 V motor that draws a low 6.1 amps. The Proflo maximum water pumps feature a computer-designed machined billet impeller, a stainless steel shaft, and a carbon ceramic seal that offers a 10,000-hour life expectancy. These CVR Proflo maximum water pumps are available in different colors and sizes. The pumps feature a modular design and can be mounted on a number of different engine applications. Amazingly, these pumps can also be mounted in remote locations. Stainless steel fasteners are included. Additionally, the inlet fittings can be changed between the passenger and driver side to suit your radiator outlet. Proflo maximum water pumps are the cooling system components that your ride craves!

4.11 out of 5 stars ( 18 )

$307.99

—

$324.99

Nitrous Pro Flow High-Flow Solenoids

Nitrous Pro Flow High-Flow solenoids are designed with the professional racer in mind. They feature stainless bodies, high-lift plungers for maximum capacity, and PTFE seals for longevity. Nitrous Pro Flow also offers nitrous solenoids with an integrated purge port for ease of packaging, the most complete purge of the system, and consistency and reliability. Order the type, flow, and size preferred for your application.

2.0 out of 5 stars ( 1 )

$123.75

—

$218.75

Edelbrock Pro-Flo Universal Conical Air Filter Elements

Edelbrock Pro-Flo universal conical air filter elements are an economical way to ensure that your engine is getting clean air—without the expense of buying a new filter every few thousand miles. They're constructed for superior filtration and airflow performance. The filter elements feature triple chrome plated trim for a show-quality look and are available in black, red, white, and blue to complement any engine bay. They're also designed with three inlet adapter rings for use on 3 in., 3.5 in., and 4 in. inlet tube systems. Pro-Flo universal conical air filter elements also feature the Edelbrock exclusive Pro-Charge clean strip for easy maintenance. This strip will let you know when it's time to clean your filter.

4.22 out of 5 stars ( 9 )

$34.99

—

$65.99

Edelbrock LS Pro-Flo 4 EFI Harnesses

Edelbrock LS Pro-Flo 4 EFI harnesses are required for the Pro-Flo 4 LS kits. They connect into the main harness and the crank sensor, cam sensor, and idle air control (IAC) motor. Available to fit engines with a 24-tooth or 58-tooth reluctor wheel, these wiring harnesses are the last component you'll need to complete your Edelbrock Pro-Flo 4 LS engine upgrade. To identify which part is right for your application, Gen III 24-tooth engines featured the cam sensor mounted at the top rear of the block, while Gen IV 58-tooth engines feature the cam sensor mounted onto the timing cover.

5.0 out of 5 stars ( 3 )

$93.99

—

$121.99

On Sale

Fragola Performance Systems Series 2000 Pro-Flow Hose End Replacement Sockets

Renew your hose ends with Fragola Performance Systems Series 2000 Pro-Flow hose end replacement sockets. After you wrench on your hose ends, they can become scratched and unappealing. Fragola offers replacement sockets manufactured from quality aluminum in several finishes and sizes. Improve the appearance of your Fragola 2000 Series hose ends or replace a lost or damaged socket with Fragola replacement sockets.

Not Yet Reviewed

$3.99

$3.79

Edelbrock Musi 555 C.I.D. 697 HP Pro-Flo 4 Long Block Crate Engines

Edelbrock Musi 555 C.I.D. 697 hp Pro-Flo 4 long block crate engines are powerful, big cubic inch packages featuring the ultra-efficient Edelbrock E-CNC cylinder heads. The heads are ported where it counts to achieve optimal airflow for maximum horsepower and torque in high performance street and light-duty racing applications. The key advantage of these cylinder heads is their increased airflow for big power, and the exhaust port exits are in the stock location, which allows for the use of readily available off-the-shelf headers.

Not Yet Reviewed

$24,944.95

56 Results Found For "pro-flo 4"