Availability
These OTC front coil spring compressors work on most late model rear-wheel drive American-made models where the spring is located between upper and lower control arms. OTC manufactures these tools for performance and dependability. They include four case-hardened, self-aligning plates to ensure proper load distribution under tension.
( 47 )
$263.99
OTC's cylinder leakage tester kits quickly diagnose internal engine problems, such as bad rings, valves, and leaking head gaskets. OTC includes an adjustable regulator, fittings, hose assembly, and a case.
( 65 )
$97.99
OTC Strut Tamer II Extreme spring compressors supply the strongest compression force—up to 4,000 lbs. to compress and rebuild large truck, SUV, and passenger car shock/strut assemblies. They also set a standard for safety, meeting the new ASME PASE safety standards for spring compressors. Safely compress the largest strut springs with OTC Strut Tamer II Extreme. They are available with or without stand. Features include: * Forged locking jaws includes larger pads and offset to clamp onto and compress springs even tighter than before * Extra-thick 5/8 in. compression arms for superior strength, stability, and safety * Locking trunions for optimal stability during spring compression * Arm-locking rings eliminate the need for tools to adjust * 2:1 reduction gearbox allows for a 2:1 torque compression increase when compressing struts * Spring capacity of 2 1/2 in. to 10 in. diameter; 1 1/4 in. to 24 in. vertical stroke * Stand with wheels for easy mobility in the shop (ST model only) * During compression, the stand's wheels lift off the floor, and four no-slip rubber pads keep the stand firmly in place
( 1 )
$1,341.99
—
$1,678.99
OTC service floor jacks have built-in safety overload to prevent over utilization beyond the jack's rated capacity. They also feature a convenient foot pedal to speed the lifting operation, with a handle lock and release control located on top of the handle. The spring-loaded handle can be locked into any position from vertical to horizontal. Cycle tested design for a long life of professional duty. Offered in 5, 10, or 20-ton with or without air-assist OTC service floor jacks out muscle all others.
Not Yet Reviewed
$1,110.99
—
$3,784.99
OTC 30-ton king pin presses include the heavy-duty kingpin and brake anchor pin pusher that utilizes its cylinder and hydraulic force to replace traditional time-consuming torch and hammer methods. They get the job done in minutes instead of the better part of a day. Five special collars and two pins allow OTC 30-ton king pin presses to work on both straight and tapered kingpins. Product features and items include: * Accommodates sizes from 7/8 in. to 2 in. diameter and up to 11 1/4 in. length * Capable of pushing out heavily corroded kingpins * Anchor pin can be removed quickly by using the special adapter installed in the pusher's base block with the unit positioned over the brake's spider * Hydraulic cylinder (4121A-MA) * 2-speed hand pump; 0.662 cu. in./stroke (4012A)
Not Yet Reviewed
$2,748.99
OTC complete deluxe compression tester kits offer a complete package for compression testing on gas engines. OTC also includes the deep well connector used on recessed plug well style heads and the new Ford Triton engine adapter using 16mm thread plugs. Kits include: * Flat and tapered seat plug adapters * 25 in. flexible hose * 2.50 in. gauge * Dual scale * 8 in. deep well 14mm connector * 5 in. flex Ford Triton 16mm adapter * 12 in. flex hose with a 14mm standard reach * 12 in. flex hose with a 14mm long reach * Carrying case
( 36 )
$94.99
—
$134.99
OTC 1,500 lb. capacity auxiliary stands are used under hoist to provide partial support for positioning of vehicle components during their installation and removal. An adjustable saddle sits atop a fixed column and base, providing high reach assistance for removing or installing vehicle components like transmissions, U-joints, radiators, driveshafts, exhaust systems, and catalytic converters. The adjustment rod features a bearing-mounted T-handle and 5 1/4 in. x 1 1/4 in. U-shape saddle. The OTC under hoist auxiliary stands are designed for rugged daily use by professionally trained vehicle technicians. They're available in standard and foot pedal assist models.
( 7 )
$127.99
—
$144.99
OTC Revolver engine stand adapter plates are available for a long list of engines from Detroit Diesel to Volvo. Many of these steel plates will require the universal adapter assembly for mounting individual plates to your OTC Revolver engine stand. Choose the plate(s) for the engine(s) your work on.
( 1 )
$452.99
—
$1,951.99
OTC axle shaft seal installers for are designed for use on select Ford F-Series Super Duty trucks that have a vacuum-operated front axle. The drivers are built into the installers, saving you time and money! They correctly install the seal onto the axle shaft and into the wheel knuckle, preventing front hub vacuum leaks that would cause the 4WD to not engage.
( 26 )
$119.99
OTC glow plug bore reamers are specialty tools for select engines. They will ream bores for proper replacement of glow plugs—or, heating elements that warm incoming fuel and air to encourage efficient fuel combustion in a diesel engine. Order the reamer recommended for your engine application.
Not Yet Reviewed
$177.99
OTC universal belt tension gauges are used to check your drive belt tension and to ensure maximum belt and bearing life.
( 3 )
$24.99
—
$178.99
OTC's air-assisted high-lift transmission jacks are perfect for those applications with a clearance problem--the low height of these jacks is 41.500 in. The jacks have a weight capacity of one full ton, and are designed with a metered foot-operated air pump. This allows each transmission to be effortlessly lifted into place, precisely controlling the load during removal and installation. A safety bypass prevents damage caused by a system overload.
Not Yet Reviewed
$4,198.99
OTC DPF cleaner replacement filter cartridges ensure that the cleaning process of your Diesel Particulate Filter cleaning units remain effective. Each new filter cartridge includes a Bag-out kit with plastic bag, cinch strap, and cable tie to remove and dispose of used filters. Replacing cartridges should be part of your unit's regular maintenance. To get the best service from your DPF cleaner replace filters with genuine OTC filter cartridges.
Not Yet Reviewed
$509.99
OTC's transmission adapter kits allow the user to utilize the engine stand. OTC transmission adapter kits replace the adjustable arms of the stand to hold and position the transmission at workbench height. The transmission is held with three sides fully exposed and can be rotated 360 degrees for an easy repair.
( 8 )
$149.99
—
$1,232.99
OTC harmonic balancer pullers are designed for removing damper pulleys in tight engine compartments without removing the radiator. This OTC kit includes a 3-jaw puller, four lengths of forcing rods, and a forcing screw with a 3/8 in. square drive for ratchet use, and a 3/4 in. hex for wrench or socket use.
( 73 )
$89.99
—
$110.99
OTC's pulley service sets will cover most domestic vehicles. These OTC sets are made from sturdy materials that will work in a garage or service station setting.
( 30 )
$58.99
OTC adjustable piston ring expander pliers make installing your piston rings easier. Their have tips are designed to capture the ends of the piston ring to hold and expand them securely without twisting or breaking. They feature a comfortable vinyl grip and a 9 in. length. Use these OTC adjustable piston expanding ring pliers and avoid broken rings that come from installing piston rings with your hands.
( 52 )
$18.99
OTC vacuum pressure gauge kits are ideal for testing vacuum lines and components. Quickly diagnose internal engine problems such as bad rings, valves, and leaking head gaskets. These OTC kits comes complete with the necessary adapters, dual scale gauge, and a carrying case.
( 41 )
$34.99
OTC advanced timing lights are a must have for any mechanic that needs to set base or advance timing. The timing of your engine dictates how efficient it will run and how much power it will make, so accurate settings are crucial. The OTC advanced timing lights allow for extremely accurate adjustment of timing in both conventional and computer-controlled ignition systems. OTC advanced timing lights feature: * Adjustable knob measures centrifugal vacuum and computer advance * On/off touch control * All-metal inductive pickup * Reflected, super bright xenon flash * Removable leads with twist-lock connectors * One-touch controller
( 4 )
$134.99
Do you need a replacement switch for your hydraulic-controlled equipment? OTC manufactured switches are made from durable materials that can withstand the demands of today's work environments. These OTC switches include a 10 ft. cord and can be ordered for on-the-floor operation or a fixed mount.
Not Yet Reviewed
$424.99
OTC piston ring compressor sets assist you in ring and pinion installation. OTC has a couple of different sets to choose from with compressor rings and compressor and/or expander tools. Both include cases, so you can pick the one best suited to your needs and budget.
( 16 )
$86.99
—
$152.99
OTC vacuum brake bleeders turn your 2-man chore into a one-man job. Attach shop air and use the quick-release trigger for on-demand vacuum and hands-free operation. These compact brake bleeders feature a universal rubber fitting that holds securely on the brake bleeder screw. For fast and efficient vacuum brake bleeding—by yourself—OTC has the answer.
( 4 )
$126.99
—
$166.99
OTC universal hub pullers, with their adjustable sliding arms, make wheel hub removal quick, easy, and damage-free. OTC manufactures these hub pullers out of quality materials to ensure performance.
( 28 )
$145.99
—
$240.99
When you're working under a car lift, OTC Tools underhoist stands are a necessity. These heavy-duty underhoist stands are designed to stabilize the cars or trucks on your lift. They also help to support exhaust, suspension, or drivetrain parts while you're working under a vehicle. OTC underhoist stands are made to provide you with extra comfort and safety, knowing that the vehicle or components that you are working on are properly supported. These stands are available in single leg and tripod styles. Both stands feature heavy steel construction and a quick-adjust, spin-type handle with a thrust bearing.
( 4 )
$189.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
