Availability
Showing In Stock Items. Show All 135 Items.
Designed and calibrated from Edelbrock for use in marine applications, these Edelbrock carbs comply with U.S. Coast Guard safety standards. Cast surfaces are protected by a Chromate conversion coating which is used as a corrosion inhibitor. Other features include modified bowl venting, specially designed throttle shafts, an accelerator pump seal, a 3/8 in. inverted flare fuel inlet fitting, tube in airhorn for fuel pump vent, a 5 1/8 in. flame arrestor flange, a universal throttle lever, and revised secondaries for improved transient performance. Also included with every Edelbrock carburetor are instructions for installation, set up, and basic tuning.
( 71 )
$621.95
Holley Marine carburetors are designed to meet Coast Guard specifications. Each carburetor's fuel metering system is calibrated to compensate for unique engine loads found on boats and feature J-style vent tubes to direct fuel/fumes back into the carburetor for safe operation while on rough waters. Choose from a large selection with different options, such as single or dual feed fuel inlets, vacuum or mechanical secondaries, and universal or engine specific calibration. Features: * Gold Dichromate finish for corrosion resistance and a classic Holley look * Factory preset electric choke for easy startups * Power valve blow-out protection * 100 percent wet-flow tested by Holley technicians to assure it arrives ready to run
( 1 )
$679.95
Holley 4160 marine carburetors include all of the same features as their street cousins--plus a few more that make them adaptable and legal for marine use. Primary differences include fuel bowl vent tubes, sealed throttle shafts, and universal marine calibration. Plus, they are designed to meet flooding and backfire requirements as defined by the U.S. Coast Guard. Other than that, they're typical Holley quality all the way, with a square bore flange, vacuum secondaries, single or dual fuel inlets, an electric or manual choke, 30cc accelerator pumps, and a 5 in. airhorn (unless noted otherwise). And last but not least, you can choose between universal or direct fit OE replacement versions.
( 10 )
$899.95
Featuring typical Holley quality, model 2300 marine carburetors include special modifications that make them adaptable and legal for marine use. Primary differences include J-style fuel bowl vent tubes and sealed throttle shafts. In addition, these 2-barrel carbs were designed to meet flooding and backfire requirements set by the U.S. Coast Guard. Other features include an electric choke, 30cc accelerator pumps, single fuel inlets, and a 5 in. airhorn.
Not Yet Reviewed
$682.95
JET offers a complete line of marine carburetors to keep your boat motoring the waterways. They are remanufactured using the highest quality parts to meet strict quality standards and ensure high performance for your boat. Don't be left in the wash--power your vessel with quality remanufactured JET marine carburetors.
( 19 )
$499.95
Sierra Marine carburetors are new precision castings built to meet or exceed OEM specifications. They offer several 2- and 4-barrel replacement styles to choose from. Order the model recommended for your watercraft application. Features include: * Recalibrated to maximize fuel efficiency and performance * All carburetors are flow-tested throughout the entire throttle range * Fuel mixture and idle settings are preset to ensure that only minor idle and choke adjustments are necessary during installation
( 40 )
$36.99
—
$1,155.99
Quick Fuel M-Series carburetors launch high performance for your watercraft. QFT marine performance carburetors are specifically engineered for the positive and smooth fuel delivery that's vital to your power boat. M-Series carburetors all feature billet metering blocks for exceptional strength, interchangeable air bleeds, restrictions for fine tuning, and PTFE coated throttle shafts and bearings for smooth throttle response. Plus, they offer aluminum fuel bowls with integral sight glass windows, marine J-style vent tubes, and QuickLink secondary linkage for fast and easy changes in throttle opening rates. QFT applies a protective coating to the main carb body and fuel bowls to prevent corrosion in harsh marine environments. They are available in several cfm models, as well as a couple of special models calibrated for Roots-style 2 x 4 supercharged engines and large-displacement engines. Quick Fuel M-Series marine carburetors are hand-assembled and run-tested on real engines for precise fuel delivery and ultimate precision on the water.
( 2 )
$1,049.95
On Sale
PRW Q-Jet marine carburetors are manufactured with all new components. They are a great upgrade from stock GM marine carburetors and are also equipped with PRW's industry first lean/rich adjustment allowing 15% +/- main circuit adjustment to allow for precise tuning with ease. These PRW carburetors are compatible with Mercruiser Marine throttle linkages. They are available in 650 cfm and 695 cfm and meets U.S. coast guard requirements. Choose the PRW Q-Jet marine carburetor that is designed for your application needs. Key features: * All new—not rebuilt or remanufactured * Available for 650 and 695 cfm applications * Universal replacement for most GM marine applications * Industry first Lean/Rich adjustment allowing up to 15% +/- main circuit adjustment * Includes most required vacuum ports * Complete with a one-wire electric choke * Meets US Coast Guard requirements * Locally assembled and run-tested, with all gaskets, metering rods, jets and air bleeds made in the USA
Not Yet Reviewed
$729.95
$499.95
Holley Gen 3 Ultra Dominator Marine carburetors are designed for use on marine high-horsepower engines. They utilize high-capacity fuel bowls with 20 percent more fuel capacity to eliminate starvation, an integrated fuel shelf to minimize fuel aeration, and internal baffling to control fuel slosh. The patent-pending Gen 3 main body is 5/16 in. taller than the previous generation, allowing for larger radius air entries—which are optimized using Computational Fluid Dynamics (CFD) software to deliver smoother flow into new fully machined, big bore venturi. Other features include all-aluminum construction, 12-hole billet booster inserts, fully tunable billet metering blocks, adjustable external linkage, throttle position sensor mounting points and knurled (hand-adjustable) curb idle screws. Each calibration has been dyno-tested to deliver proven performance! Additional features include: * Gray anodized finish with black anodized billet aluminum metering block and booster inserts * Fully machined from venturi throat to throttle bore for predictable and repeatable performance * Metering blocks feature true gasket sealing and fully adjustable emulsion bleeds, power valve channel restrictors, and idle feed restrictors * Dual 50cc accelerator pumps provide the perfect amount of fuel from idle to full throttle * Clear sight windows on both sides of bowls for easy and safe fuel level adjustments * Built-in drain plug in front center of bowl provides easy access to empty contents of bowl * O-ringed inlet threads offer a large variety of plumbing options and can be plumbed from either side * Factory-ready TPS mounting points for use with data acquisition systems (Holley TPS part number 534-214 available) * Contoured hex head squirter screws for streamlined airflow * Fully adjustable stainless steel external linkage can be adjusted for 1:1 progressive or soft progressive throttle activation (no linkage parts under the carburetor) * J-style vent tubes * 100 percent wet-flow tested by Holley technicians to assure it arrives ready to run
Not Yet Reviewed
$1,999.95
Need to service your carburetor? Sierra Marine carburetor floats are available in many styles to repair numerous carburetors. All are quality-built from premium materials to provide long-lasting performance. Whether you need a full carburetor kit or just individual components, like floats, Sierra Marine offers a great selection to get your boat back out on the water.
( 1 )
$4.99
—
$36.99
Holley carburetor renew kits are original equipment rebuild kits and are available for all Holley marine carburetors as well as Carter and Rochester. Each kit contains all parts and gaskets that are necessary to restore like-new performance to your marine carburetor. Detailed instructions are also included to guide you through the rebuilding process. Start off the season with one of these quality Holley Renew marine repair kits--it's your guarantee for trouble-free cruising!
( 118 )
$44.70
—
$105.95
Summit Bucks
Fel-Pro offers marine carburetor mounting gaskets for a variety of watercraft applications. They're available in numerous styles and configurations for dependable carb sealing, in and out of the water.
( 12 )
$8.99
—
$17.99
Nothing ruins a day on the water like carburetor-related engine trouble. Sierra Marine carburetor rebuild kits utilize superior ethanol-resistant materials, matched with unsurpassed quality control. They're designed to get you on the water quickly. Backed by their industry-leading warranty, Sierra will have the carburetor kit you need, when you need it, and with the quality and protection you demand.
( 9 )
$4.99
—
$138.99
Do you need to replace your marine carburetor? If so, then try one of our Summit Racing™ marine carburetor and flame arrestor Pro Packs to get the job done. They include an Edelbrock carburetor with an electric choke, a K&N stainless steel flame arrestor, and carburetor mounting studs. Change the performance and drivability of your boat with these Summit marine carburetor and flame arrestor Pro Packs.
( 2 )
$823.93
To ensure smooth, positive response from your watercraft fuel system, Quick Fuel Technology introduces Black Diamond Marine Series carburetors. The proper blend of air and fuel is critical when you're cruising miles from shore, and the innovative team at QFT has engineered carbs for every street and race application imaginable. Trust their expertise for your boat needs, as well. Depending on the Marine Series carburetor model selected, you can choose single or dual fuel inlets, vacuum or mechanical secondary, primary and secondary jet sizes, and inner and outer air bleed sizes. Quick Fuel Black Diamond Marine Series carburetors feature: * Aluminum fuel bowls with sight glass windows for quick float adjustment * Changeable idle air and high-speed bleeds * PTFE-coated throttle shafts with PTFE bearing ribbons and stainless steel plates * J tubes to prevent spillage * Black Diamond high-temperature satin coating on main body and fuel bowls for enhanced corrosion protection and appearance; coating also provides a 6 percent reduction in fuel temperature * 4-corner idle adjustment (except M-600) * Billet metering blocks with changeable primary idle feed and power valve channel restrictions (except M-600)
( 15 )
$749.95
—
$999.95
Summit Racing™ marine carburetor and fuel pump Pro Packs have taken the most popular combinations of square bore carburetors, fuel pumps, and fuel pressure regulators and put them together under one part number to save you time and money. Available with your choice of an Edelbrock or Holley carburetor, the Summit Racing™ marine carburetor and fuel pump Pro Packs are sure to improve your boat's performance.
Not Yet Reviewed
$853.90
If you have recently noticed a lack of normal operation with your marine engine's carburetor, and specifically the float chamber, it might be time for Sierra Marine carburetor float chamber gaskets. They are designed to help the float system function properly without leaking so that fuel is ready when your engine needs it. Whether you are doing repair work, full replacements, or a new build, get the products that keep you moving when you order the Sierra Marine carburetor float chamber gaskets best suited for your application.
Not Yet Reviewed
$10.99
—
$65.99
Small parts with a big job—gaskets. Sierra Marine has many options available to keep your boat in the water and performing its best. Their carburetor gasket kits contain precision cut pieces, along with other components (depending on the kit) to restore a proper seal and operation. Refresh your carburetor; select the kit designed for the carburetor used on your boat's engine.
Not Yet Reviewed
$30.99
If you have recently noticed increased fuel usage and a lack of normal pressure, it might be time for Sierra Marine carburetor float bowl gaskets. They are designed to help the bowl system properly hold fuel without leaking so that it is ready when you need it. Whether you are doing repair work, full replacements, or a new build, get the products that keep you moving when you order the Sierra Marine carburetor float bowl gaskets best suited for your application.
Not Yet Reviewed
$1.99
—
$27.99
Sierra Marine offers a wide range of watercraft replacement parts—including these carburetor base plate gaskets. They're available for applications such as Honda® outboards. The seals are made from quality materials and original specs for correct fit and performance. Order the gasket recommended for your carb base plate.
Not Yet Reviewed
$1.99
—
$20.99
Sierra Marine carburetor needle valve O-rings prevent leaks. Fitting into a groove on the needle stem, these small, but important, parts provide a positive seal to assist in the optimal performance of your carburetor.
Not Yet Reviewed
$2.99
Sierra Marine carburetor air horn gaskets are specifically designed for larger carburetors like the Briggs & Stratton Flo Jet and other similar models. Whether you are doing repair work, full replacements, or a new build, these gaskets help you get it done right the first time. Get the products that keep you moving when you order Sierra Marine carburetor body gaskets (see the Applications section for fitment details).
Not Yet Reviewed
$3.99
Sierra Marine carburetor cover gaskets are made with performance-grade materials and precision die-cut for a great fit. These carburetor components works well with a variety of fuels and additives and defies swelling caused by various fuels to provide a good seal with little clamp force, torque retention, crush resistance, shear strength, and ease of release. For over 50 years, Sierra has supplied the best aftermarket parts in the marine industry—so boaters can enjoy the best of times on the water. Start upgrading your watercraft now, with high-quality parts and accessories from Sierra Marine.
Not Yet Reviewed
$1.99
Sierra Marine carburetor accelerator pump diaphragms are designed to replace or upgrade your existing accelerator pump diaphragm. Each Sierra product meets or exceeds the original equipment part it replaces. For consistent, reliable driving performance, choose top-quality products from Sierra Marine. Order the model recommended for your application needs.
Not Yet Reviewed
$4.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
