Availability
ATK High Performance Chrysler 5.7 Gen III Hemi 400 hp long block crate engines were built in a team effort with Comp Cams. Utilizing ATK remanufactured GEN III 5.7L Hemi engines; they upgraded the camshaft, springs, and pushrods to produce reliable 400+ hp. Features typically include: * Seasoned OE Gen III Hemi block * OE reground crankshaft * OE reconditioned connecting rods * Hypereutectic pistons * Chromoly piston rings * Hydraulic roller camshaft * Aluminum cylinder heads * OE shaft mount rocker arms
( 4 )
$4,798.99
Mopar Performance 6.2L Supercharged Hemi crate engines exert a monstrous 707 hp and 650 lbs.-ft. of torque. These complete Hellcrate engine assemblies includes water pump, flywheel and clutch, front sump oil pan, intake manifold with throttle body, fuel injectors and coil packs. You've asked for it and Mopar delivered. Features and specs include: * 376 cu. in. * 103.9mm bore * 90.9mm stroke * Cast iron block with 4-bolt powder metal main caps * Forged steel crank material * Connecting rods and floating pins with diamond-like coating * Forged piston material * Nodular iron camshaft * Valve/lift duration at 0.15mm: Intake--14.25(0.561)mm, 278 degrees, hollow stems Exhaust--14.0(0.551)mm, 304 degrees, sodium-filled stems * 356 aluminum, HEMIspherical chamber cylinder heads * 54.3mm intake valve size * 42mm exhaust valve size * 9.5:1 compression ratio * 6,200 max rpm
Not Yet Reviewed
$17,834.99
Edelbrock Gen III 426 HEMI E-Force Supercharged long block crate engines start with brand new iron Mopar 392 blocks. The engines are then assembled with high-quality components, including Edelbrock E-Force supercharger systems featuring Eaton TVS R2650 rotors—which provide unparalleled efficiency, whisper quiet operation, and OEM reliability. A 4.090 in. bore and 4.050 in. stroke help these HEMI engines produce incredible low-end torque, while the 9.9:1 compression ratio allows for safe and reliable supercharged performance on 91 octane pump gas. Edelbrock Gen III 426 HEMI E-Force Supercharged long block crate engines are available with or without electronics (ECU with tune and wiring harness). Engine Specifications: * Displacement: 426 c.i.d. * Horsepower: 808 hp * Torque: 762 lbs.-ft. * Compression: 9.9:1 * Block: New iron Mopar 392 * Crankshaft: Forged 4340 * Pistons: Forged aluminum—5cc * Rods: Forged H-beam * Camshafts: Comp Cams 226 degrees/234 degrees, .619/.612, 116 LSA * Rocker arms: Mopar OEM * Induction: E-Force R2650 Supercharger * Cylinder heads: Edelbrock Performer RPM * Finish: Black powdercoat * Warranty: 2-year/unlimited mileage The high twist, 4-lobe R2650 rotor design is 15 percent larger than the TVS 2300 and features several improvements to maximize efficiency and performance at upper rpms. Improvements and advantages of R2650 rotors over R2300 rotors: * 170 degree twist (versus 160) * Better sealing with optimized length-to-diameter ratio * Increased durability with larger bearings and timing gears * Pressure relief ports in bearing plate for reduced input power * 4 percent more efficient * 15 percent larger displacement * 18 percent less input power required * 25 percent more airflow at 18,000 rpm and 14 psi boost (2.0 pressure ratio)
Not Yet Reviewed
$28,418.95
—
$32,726.95
Edelbrock Gen III 426 HEMI E-Force long block crate engines make a great foundation for any high-horsepower forced induction Mopar build. These new iron Mopar 392 blocks have a compact design that allows for a seamless swap into most platforms; eliminating the need for modifications to your engine bay or hood. They are topped with Edelbrock Performer RPM cylinder heads.
Not Yet Reviewed
$24,366.95
Mopar Replacement 6.4L 388 c.i.d. Hemi long block crate engines are not remanufactured engines; these are brand new fully assembled V8 engines with brand new components. They feature a deep skirted cast iron block, aluminum heads, a cast crank. Add your choice of intake manifold, valve covers and other components to complete the perfect engine for your hot rod or truck. The engines are ideal for swapping into Mopar applications such as Jeep, Dodge, and Chrysler.
Not Yet Reviewed
$8,536.99
BluePrint Engines Pro Series Mopar 426 c.i.d. EFI base long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 610 hp and 525 lbs.-ft. of torque. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal --- ROTATING ASSEMBLY: Forged steel crankshaft 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III HEMI Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- PS426CTF ALSO INCLUDES: Fuel injection Throttle body Harmonic balancer Fabricated intake manifold Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Compression ratio: 10.48:1 Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel delivery type: Fuel injected -- Spark plug: NGK 97408/ LZTR6AP11EG -- Spark plug gap: .043 in. -- Harmonic balancer: Non-weighted -- Flexplate / Flywheel: Non-weighted -- Stall converter: 2500+ -- Intake manifold: Fabricated aluminum Gen III HEMI -- Fuel recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2
Not Yet Reviewed
$13,799.00
—
$16,899.00
BluePrint Engines Pro Series Mopar 426 c.i.d. EFI Deluxe dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 872 hp and 764 lbs.-ft. of torque. These engines are available with a polished or black anodized accessory drive pulley kit. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crank 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Whipple 3.0L supercharger Supercharger fluid reservoir Hellcat throttle body Harmonic balancer Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Installed complete front accessory drive: water pump, alternator, power steering, A/C, all belts and pulleys Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Whipple 3.0L supercharger -- Spark Plug: NGK 5107 -- Spark Plug Gap: .025 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Supercharger -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2
Not Yet Reviewed
$26,799.00
—
$26,899.00
BluePrint Engines Pro Series Mopar 426 c.i.d. EFI Deluxe dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 610 hp and 525 lbs.-ft. of torque. The engines are available with a polished or black anodized accessory drive pulley kit. --- BLOCK: NEW OEM Hellcat engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crankshaft 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Holley Terminator engine harness Fuel injection Throttle body Harmonic balancer Fabricated intake Manifold Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Installed complete front accessory drive: water pump, alternator, power steering, A/C, all belts and pulleys Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Fuel Injected -- Spark Plug: NGK 97408/ LZTR6AP11EG -- Spark Plug Gap: .043 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Fabricated Aluminum Gen III HEMI -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2
Not Yet Reviewed
$18,799.00
—
$18,899.00
BluePrint Engines Pro Series Mopar 426 c.i.d. Base dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 872 hp and 764 lbs.-ft. of torque. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crank 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Whipple 3.0L supercharger Supercharger fluid reservoir Hellcat throttle body Harmonic balancer Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Holley Terminator ECU controller kit and wiring harness --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Whipple 3.0L supercharger -- Spark Plug: NGK 5107 -- Spark Plug Gap: .025 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Supercharger -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2
Not Yet Reviewed
$24,299.00
VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.
( 63 )
$3,351.99
—
$4,496.99
Are you tired of your low performance factory V-belt pulleys? These March Performance Mopar crate Hemi serpentine pulley kits are designed to replace your low-quality V-belt pulleys, while retaining your standard rotation water pump. They are a great way to make your engine compartment look showroom-fresh. These kits are simple to bolt on and are an easy way to increase horsepower, as well as eliminate belt throw. They are made from high-quality billet aluminum and have been hard coated for extra strength and performance. They have also been given a clear powdercoat to ensure long-lasting shine and durability. There's no question that these March Performance Mopar crate Hemi serpentine pulley kits are some of the best pulleys on the market.
Not Yet Reviewed
$314.99
Mopar Replacement Gen3 Hemi 6.2L crate engine blocks are ideal for the Hellcat series of Dodge Challengers and Chargers. The brand new V8 short blocks provide additional displacement to produce even more power and to make better use of the Hellcat supercharger. These OEM-style bare cast iron blocks are the foundation for ultimate Hellcat builds, suitable for daily drivers and racers alike. An economical start to better performance! * Cylinder bore diameter: 4.09 * Engine size: 6.2L/376 c.i.d.
Not Yet Reviewed
$2,599.99
On Sale
COMP Cams Chrysler Hemi phaser camshafts utilize Variable Valve Timing (VVT) technology to maximize power and performance in stock and street/strip applications. The new Hemi engines from Chrysler are great power plants straight from the factory, with technology that allows the camshafts to move in real time. Instead of scrapping this advanced system, COMP Cams has embraced it with a new line of aftermarket Hemi-specific cams. The patent-pending Hemi phaser camshafts work with phaser limiters or locks to fully utilize Chrysler's Variable Valve Timing (VVT) technology, which allows them to pick up torque in the low end of the engine, while maintaining power up high. Made from a billet core, these hydraulic roller cams are engineered tough enough to handle 5.7L and 6.4L Hemi street/strip engines. Their unique, no-springs-required design maintains piston-to-valve clearance, while enabling high performance lobes utilizing VVT, making them perfect for late model Dodge Challengers, Dodge Chargers, Chrysler 300s, Jeeps, Dodge trucks, and Mopar crate engines with VVT. COMP Cams Chrysler Hemi phaser camshafts are available as both custom and three different off-the-shelf grinds, dependent upon engine type, for improved performance over OEM options. They will require the COMP Cams phaser limiter or lock kits to limit the degree of maximum cam phasing to 14 crank degrees (7 cam degrees) and they are available separately.
( 5 )
$605.95
$545.36
Patented ATI Super Damper standard harmonic balancers are the only crankshaft dampers designed exclusively for high performance engines. Inner and outer shells are available in aluminum or steel, and contain a steel inertia weight. The inertia weights have six (2-ring design) or eight (3-ring design) computer-machined grooves to retain the proper durometer O-rings (dyno tested for each application). Whether you race or just drive on the street, ATI harmonic balancers are the perfect choice. Features include: * Eliminates torsional crankshaft vibrations * Exceeds SFI 18.1 specs * Black zinc chromate finished * OEM equipment on a variety of crate engines * Tunable, rebuildable, and extremely efficient at all rpm * Laser-engraved 360 degree timing marks * Supercharger and power steering drive pulleys available for some applications
( 225 )
$358.40
—
$473.75
ATI Super Damper Serpentine Series harmonic balancers are patented and feature grooves for serpentine belts machined into the outer damper shell. The dampers come with six outer grooves for standard OEM drive systems—but eight and 10 grooves are available for supercharger or turbo applications. Serpentine dampers are offered in a variety of diameters, and crank hubs may be fitted with a 6-groove serpentine pulley to drive external oil pumps or vehicle accessories. The Serpentine Series Super Dampers fit all ATI GM-front crank hubs and can be adapted to many engine combinations, providing maximum flexibility. They're available in steel or lightweight, hardcoated aluminum. Features and benefits: * Eliminates torsional crankshaft vibrations * Exceeds SFI 18.1 specs * Black zinc chromate finished * Tunable, rebuildable, and extremely efficient at all rpms * Laser-engraved 360 degree timing marks
( 228 )
$372.98
You don't need a king's ransom to rule the track. ICON premium forged piston and ring kits deliver high performance racing pistons crafted from high-strength 2618 primary aluminum alloy and matched with performance rings, creating remarkable value-packed kits. The pistons feature fully machined heads and valve ports, advanced accumulator and mini groove technology, drilled pin holes, triple wound spiral lock rings, and their proprietary diamond-finished skirts. Heavy-duty ICON premium forged pistons can handle the pressure and abuse from the horsepower numbers that your engine produces. If you're ready to give up your kingdom to build more horsepower with a great set of pistons--think again! ICON premium forged pistons and ring kits will help you reign victorious without spending a lot of cash.
( 18 )
$986.99
—
$1,156.99
Your budget doesn't need to take a hit every time you buy gaskets; and you never need to sacrifice quality. SCE AccuSeal E Series is the common sense gasket line for engine builders, racers, or weekend warriors who want a better gasket at a reasonable price. AccuSeal E exhaust gaskets hold up under high temperatures and pressures; they're available for nearly 20 port styles in a variety of sizes and quantities. Order the seals recommended for your application. Additional product details: * Designed for exhaust header/manifold high-temperature and pressure usage * Kevlar® and graphite material combination provides extreme heat resistance, strength, and durability * Composite or paper gasket material also available (select models) * Resists blowout and burnout from exhaust high-temperature and pressure * Good adaptability to seal header/manifold flange irregularities * Can be trimmed easily for modified port applications. * Permits easy removal of gasket for engine service * Available for a variety of year/make and engine applications, from the early 1950s and up
( 5 )
$20.14
Clearance
Mopar Performance FEAD basics kits are just some of the simple solutions to modernize your classic Mopar. Completing your crate Hemi engine kit, these front end accessory drive (FEAD) kits provide the basics. They are available for the 6.2L Supercharged, 392, and the 345 crate Hemi engines. Mopar FEAD kits include: * 6.2L--alternator, power steering pump, pulleys, and hardware * 392 and 345--alternator, tensioner, belt, idler pulleys, and hardware
( 1 )
$643.99
$530.50
Mopar Performance power steering expansion packs make power steering a snap! Completing your crate Hemi engine kit, these packs are simple solutions to modernize your classic Mopar. These power steering expansion packs eliminate steering effort, so you will get an overall smoother, more enjoyable ride. Mopar includes power steering pump, belt, and hardware in these kits.
( 1 )
$213.99
ARP High Performance Series head bolt kits are tough. They are rated at 180,000 psi--15 percent stronger than Grade 8 fasteners. They come available with a reduced wrenching hex head or 12-point head that help eliminate the need for valvetrain removal when re-torqueing cylinder heads.
( 1015 )
$262.99
ICON premium forged pistons are made from high-strength, heat-treated aluminum alloy. They feature a diamond-machined skirt, head, mini-grooves, pin bore, gas accumulator, ring grooves, and pressure-drilled pin hole oiling. The pistons have a V-rib design for light weight, strength, and maximum piston cooling. Compare weight, performance, design, and cost—and you will win with ICON!
( 43 )
$795.99
—
$1,024.99
"Lead the Heard" with Borla S-Type CrateMufflers. Specifically designed, engineered, and tuned to optimize the power and sound of your classic stock, crate, or custom-built engine, they deliver the intoxicating Borla "Sound of Power" with every squeeze of the throttle. They feature an enhanced combination of packing filament, straight-through core dimensions, perforation patterns, and cylindrical shapes. Purpose-built from aircraft-grade, T-304 stainless steel, they offer a race-inspired design to relieve the most restriction possible and bring the most power out of your engine. They feature an easily maintained finish, ensuring long-lasting showroom looks.
( 22 )
$340.99
ARP Pro Series cylinder head studs are cold-forged to ensure molecular integrity. They're heat-treated prior to thread rolling and machining. ARP Pro Series kits are also available with 12-point nuts, and all studs come complete with hardened parallel washers for an even load distribution and accurate torque readings. With hundreds of models ready to ship, these cylinder head fasteners can be ordered for virtually any style engine.
( 779 )
$245.99
Manley Pro Series I-beam connecting rods are forged from 4340 aircraft-quality vacuum degassed material. They're fully machined to produce the strongest rods possible. These rods are shot-peened to Mil specs and are 100 percent individually magnafluxed. They feature 7/16 in. ARP cap screws with 12-point heads and your choice of material grade to maximize your needed tensile strength! Manley Pro Series I-beam connecting rods are available in various sizes for a wide range of vehicles and horsepower ranges from 850 to 1,600 hp. Match up your specs, then order an individual rod or a larger set quantity.
Not Yet Reviewed
$228.43
—
$1,827.45
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
