Free Shipping on Orders Over $109 at Summit Racing

Dorman Fuel Line Check Valves

Dorman fuel line check valves are designed to replace a damaged connector without spending time or money on an entire new fuel line. They're made from quality materials, such as brass, and will resist high temperatures that usually lead to cracking. Choose the kit that's compatible with your hose diameter.

3.16 out of 5 stars ( 19 )

$34.95

—

$37.95

Tanks Inc. Fuel Line Check Valves

Tanks Inc. fuel line check valves are designed to allow flow in one direction and prevent backflow. They feature a 304 stainless steel check piston that delivers optimum flow with minimal restriction and pressure loss. These valves are ideal for fuel systems due to their low opening pressure of 3 psi. Tank Inc. check valves are offered in a choice of sizes to meet your needs.

3.33 out of 5 stars ( 3 )

$37.99

Summit Racing™ Stainless Steel Fuel and Brake Hard Lines

Summit Racing™ stainless steel multipurpose hard lines are ideal for plumbing your brake or fuel systems. These Marine-grade, 316L Polished stainless lines feature a standard 0.028 in. wall thickness for strength while remining workable and are soft-annealed for easier flaring, cutting and bending compared to other stainless steel lines. Molybdenum is also added for ultimate corrosion resistance. These lines meet SAE J1677 and ASTM A249 specifications. They're rated for a minimum burst pressure of 5,945 psi (and higher depending on line OD) and have been pressure tested and checked for safety. Order the tubing diameter needed for your applications. NOTE: Stainless steel is more difficult to bend and flare, compared to typical steel line. We recommend that a professional-grade flaring tool be used with these lines. Stainless steel can also be difficult to seal when replacing an existing brake or fuel line. The previously installed line can create a wear pattern on the flare seat which will not allow the new stainless steel flare to seal properly. When replacing an existing line we recommend a thorough inspection of the existing brake fitting, fuel fitting, junction block, wheel cylinder, brake caliper, etc. It's possible that the existing component may need to be replaced for a proper seal.

4.33 out of 5 stars ( 12 )

$58.99

Dee Zee Auxiliary Tank Transfer Line Kits

Dee Zee's auxiliary tank transfer line kits will turn your Dee Zee auxiliary tank into a portable refueling station by giving you the ability to refuel your diesel fuel tank via a gravity feed system—and that means less time at the pump and more time on the road. These kits include all hoses and the mounting hardware to complete the conversion. A shut-off valve to start and stop diesel fuel transfer helps to ensure fool-proof operation. Dee Zee auxiliary fuel line connector kit Features: * Feeds diesel directly into your fuel line * Some cutting required on the OEM fuel hose * Flow valve must be closed during vehicle operation * Gravity system not intended for continuous fuel transfer * Only for use with transfer tanks meeting Federal DOT Requirements * Auxiliary tank not included

5.0 out of 5 stars ( 1 )

$95.99

—

$98.99

HardDrive Check Valve Assemblies with Line

HardDrive check valve assemblies/EFI lines are designed as OEM replacements and include check valve, fuel line, and fittings. Available for several Harley® models, select the check valve assembly with line designed for your motorcycle.

Not Yet Reviewed

$34.16

S.U.R.&R. Check Valves

S.U.R.&R. check valves are designed to be placed inline on vehicles with faulty in-tank electric fuel pumps. Now there's no need to drop the tank in order to replace the factory check valve in the fuel pump. Simply install one of these inline valves and you'll be back on the road in no time at all.

5.0 out of 5 stars ( 1 )

$47.99

FiTech Go Fuel One Way Check Valves

FiTech offers a wide range of fuel injection parts, including these Go Fuel One Way check valves. Machined from aluminum with a black anodized finish, these fittings are installed in fuel lines to allow fuel to flow only in one direction and prevent lines from running dry. Order the inlet/outlet size needed for your plumbing application.

Not Yet Reviewed

$31.00

Allstar Performance Fuel Line Hoses

Allstar Performance fuel line hoses are ideal for replacing a worn-out, leaky, or punctured original. These nitrile rubber hoses are reinforced to guard against kinks, and they're rated up to 50 psi on carbureted apps. You can order the premium lines in a variety of diameters and lengths, all compatible with gasoline, E-85, diesel, and bio-diesel. The versatile hoses can also be used to connect coolant overflow tanks, PCV valves, and vent lines for transmissions and differentials. Order the size needed for your application.

4.59 out of 5 stars ( 39 )

$8.69

—

$66.99

On Sale

Holley 100 GPH In-Line Electric Fuel Pumps

Holley 100 gph in-line electric fuel pumps are designed for high-output naturally aspirated and forced induction EFI and carbureted vehicles. They support up to 900 EFI or 1,050 carbureted horsepower, and is compatible with pump gas, race gas, diesel, or E85. The pumps utilize inlet and outlet connections that make installation easy on new applications and quick replacement of existing competitor fuel pumps. Holley universal 100 gph in-line electric fuel pumps include a male -6 to -8 AN discharge fitting with integral high-pressure check valve, terminal nuts, terminal boots, and installation instructions. Additional features and specs: * Roller vane design provides fuel pressure and volume to support up to 900 EFI N/A or 700 EFI boosted horsepower * Compatible with Flex Fuel (E85/E90) and all types of gasoline (100 percent alcohol fuels may diminish fuel pump life) * Inlet thread is -10 AN female ORB (O-ring port fitting) and discharge is a female -6 AN ORB

3.63 out of 5 stars ( 24 )

$222.95

$200.65

Aeromotive Billet Fuel Sample Valves

Make fuel checks simple with Aeromotive's billet fuel sample valves. Depending on the model you select, the aluminum units can install into your 1/8 in. NPT inlet port with threads or quick-connect attachment. Some contain a stainless steel barb fitting for extension hoses and rotate 360 degrees for easy sampling. A spring-loaded safety feature keeps the sample valve sealed when unlocked, and rotates into a locked position when it's time for racing. When a fuel sample is required, simply rotate the valve to the unlocked position, press down for a fuel sample, re-lock, and go race!

5.0 out of 5 stars ( 7 )

$223.30

Rein Automotive Fuel Check Valves

A true dealer alternative, Rein Automotive offers a line of OE-quality replacement parts that are 100 percent identical in form, fit, and function to the original parts they are replacing. Rein Automotive fuel check valves are made from durable materials to reliably prevent fuel from draining back into the fuel tank when the engine is off, maintaining fuel pressure. Select the fuel filter check valve designed to fit your vehicle.

Not Yet Reviewed

$9.58

Walbro Electric In-Tank Fuel Pumps

Walbro electric in-tank fuel pumps are available in a variety of flow ratings, including pumps that flow significantly more fuel at higher pressure. The outside dimensions, however, of many pumps are compact enough to fit existing hanger assemblies, without modification. All pumping components have been validated to OEM specifications for use in E85/flex fuel applications. Most Walbro in-tank fuel pumps utilize a proven gerotor design. Some high-performance models, including those designed for engines with more than 750 hp, feature a dual-channel turbine design for maximum efficiency in high-pressure and high-temperature applications. The blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge. This innovative design results in improved hot fuel flow, as well as minimal noise and current use, resulting in efficiency that's higher than conventional pumps. Some pumps require modifications to system wiring, fuel lines, and the fuel module, and should be professionally installed. Installation kits including a fuel strainer, fuel hose, harness pigtail, clamps, and wire connectors are sold separately.

4.44 out of 5 stars ( 381 )

$157.99

Edelbrock Clear View Fuel Filters

Edelbrock Clear View fuel filters dress up any carbureted car's engine bay and provide a quick visual check of fuel flow and condition. Fully machined black E-coated aluminum ends are laser-inscribed with the Edelbrock logo, inlet and outlet direction, and hose size. The filters are designed for use with rubber fuel lines rated up to 10 psi. A serviceable 100-micron nylon filter element keeps dirt and debris from clogging up small passages in your carburetor. The filter element is easily replaceable. Clear View fuel filter models are available for multiple I.D. hose diameters—including a universal kit that fits 1/4, 5/16, and 3/8 in. I.D.

4.0 out of 5 stars ( 2 )

$21.95

Tanks Inc. Single Fuel Tank Line Kit for GM LS

The single fuel tank line kits for GM LS from Tanks Inc. includes 25 ft. of line and all the fittings that you need for your LS engine swap using one fuel pump and one tank. The kits are designed for LS engines that have a single fuel inlet fitting. Kit includes: * Fuel filter/fuel regulators * In-Line check valve * (2) 1/4 in. NPT to -6AN adapter fitting (fuel pump pickup and return line fittings) * (6) Russel straight -6AN straight Twist-Lok fittings * Russell 3/8 in. Male Quick Disconnect to -6AN Male fittings—fuel feed from regulator to engine fitting * Russell 3/8 in. Female Quick Disconnect to -6AN Male fittings—fuel regulator feed from pump and fuel rail fitting * 25 ft. of -6AN black push lock fuel hose

Not Yet Reviewed

$199.99

Tanks Inc. Dual Fuel Tank Line Kit for GM LS

The dual fuel tank line kits for GM LS from Tanks Inc. includes 25 ft. of line and all the fittings that you need for your LS engine swap using our fuel pumps and two tanks. The kits are designed for LS engines that have a single fuel inlet fitting. The regulators in this Tanks Inc. dual fuel tank line kit are not recommended with fuel pumps that flow over 255 lph. Kit includes: * (2) Fuel filter/fuel regulators * (2) In-Line check valves * (2) 6AN coupler fittings * (1) 6AN Male Y-fitting * (4) 1/4 in. NPT to -6AN adapter fitting (fuel pump pickup and return line fittings) * (14) Russel straight -6AN straight Twist-Lok fittings * (2) Russell 3/8 in. Male Quick Disconnect to -6AN Male fittings—fuel feed from regulator to engine fitting * (3) Russell 3/8 in. Female Quick Disconnect to -6AN Male fittings—fuel regulator feed from pump and fuel rail fitting * (2) Russel 5/16 in. Female Quick Disconnect to -6AN Male fittings—fuel regulator return line fitting * 25 ft. of -6AN black push lock fuel hose

Not Yet Reviewed

$438.99

Sierra Marine Primer Bulbs

Sierra Marine is a leading supplier to the watercraft aftermarket and offers quality parts and accessories—including primer bulbs. These squeeze bulbs are molded in-house, and feature double check valves with Viton® balls and stainless steel springs. They're available in applications to fit 1/4 in., 5/16 in. or 3/8 in. hose lines. Order the primer bulb to fit your application.

Not Yet Reviewed

$2.99

—

$31.99

FiTech Stainless Steel Fuel Line Kits

FiTech stainless steel fuel line kits are perfect for plumbing your vehicle for pump gas, methanol, ethanol, or alcohol. These braided, chemical-resistant flex lines are available in a natural or black finish, and they include aluminum fittings, 40 micron filter, and check valve. Order the fuel line diameter and length needed for your application.

5.0 out of 5 stars ( 2 )

$373.00

—

$512.00

VIAIR Braided Stainless Steel Leader Hoses

VIAIR offers the most comprehensive line of air compressors and accessories available anywhere for both the on and off-road markets. Their quality-engineered compressors and components have become the industry standards for aftermarket applications worldwide. These VIAIR braided stainless steel leader hoses are manufactured with male or female swivel ends and come with or without check valves. These hoses also come in different lengths and with different sized ends. Upgrade your air compressor hoses with quality replacements from VIAIR!

4.91 out of 5 stars ( 11 )

$30.75

—

$60.25

S.U.R.&R. Inline Schrader Valves

S.U.R.&R. inline Schrader valves provide a solution for easy access to connect fuel system cleaning and testing equipment when there isn't an accessible port available. They work on virtually any vehicle and act as an easy-access, permanent fitting. Inline Schrader valves from S.U.R.& R. are available in 5/16 in. and 3/8 in. sizes and include installation fittings for nylon, steel, and rubber fuel lines.

4.5 out of 5 stars ( 2 )

$26.99

—

$30.99

Aeromotive High Flow One Way Check Valves

Aeromotive high-flow one-way check valves are designed to prevent back-flow with minimal pressure drop. AN O-ring male inlet/female outlet connections allow easy installation into a fuel pump outlet port without adding additional lines, hose ends, or fittings. They're ideal for use when preventing drainback after the fuel pump is turned off, or when dual pumps are employed and both pumps will not always be running together. CNC-machined from 6061-T651 billet aluminum alloy with a Type II bright dip anodized finish, the fuel check valves are available in multiple sizes.

3.36 out of 5 stars ( 11 )

$104.95

—

$140.00

ACDelco Automatic Transmission Oil Cooler End Fittings

ACDelco automatic transmission oil cooler end fittings are used in the transmission cooling circuit to connect components and lines. They're manufactured to original equipment specifications for accurate fit and performance. The fittings are available in a variety of materials, styles, and sizes. Enjoy the quality, reliability, and durability of factory replacement parts; order the fittings recommended for your vehicle.

5.0 out of 5 stars ( 5 )

$22.99

Moeller Marine Outboard Fuel Line Assemblies

Moeller Marine outboard fuel line assemblies use a compounded, EPA- and CARB-approved, UV-resistant hose and primer bulb. They're manufactured to promote maximum fuel flow, while still being low-permeation certified. Assemblies include tank and engine fittings built to OEM specifications for replacement parts. They use O-ring construction on all fittings for tight, leak-free connections and clamshell packaging for proper handling during shipping. You can count on Moeller Marine for outboard fuel line assemblies engineered to the highest standards in the watercraft industry. Order the kit recommended for your motor application. Additional details: * Gasoline and solvent-resistant * Stainless steel clamps * Dual internal check valves

Not Yet Reviewed

$41.99

—

$69.99

Boating Essentials Fuel Primer Bulbs

Boating Essentials fuel primer bulbs deliver optimal fuel flow and performance. With a universal design to fit both 3/8 in. and 5/16 in. hoses, these primer bulbs feature advanced double check valves and Speed Prime technology for quick, efficient starts. They include stainless steel hose clamps and the bulb is marked with directional flow arrow.

Not Yet Reviewed

$23.39

Helix Residual Brake Check Valves

Helix residual brake check valves are available to help make your brake system build or repair easy. They eliminate air-locking and/or bleed-down issues by maintaining a constant pressure in the line. These check valves are offered for your disc, drum, or combination systems. Features include: * Anodized aluminum body for corrosion resistance * Heavy-duty construction for longevity * Multiple color options

5.0 out of 5 stars ( 1 )

$19.95

—

$29.95

62 Results Found For "fuel line check valve 3 8 napa"