Availability
Showing In Stock Items. Show All 21 Items.
John Dow offers a variety of replacement fluid evacuator components—including suction probes and adapters, hoses, gauges, vacuums, and impeller rebuild kits. Changing fluids can be a messy job when faulty equipment is involved. Find the replacement parts that match your application.
( 1 )
$48.99
BTR fuel injector plug adapters allow installation of aftermarket injectors without modifying the factory wiring harness in your vehicle. The plug-and-play adapters have the female plug to match the injector. They are available individually or in sets.
( 2 )
$5.99
—
$39.99
Trick Flow® solves your fuel injection conversion problems with these fuel injector harness adapter kits. Now you can make the change from smaller EV6 injectors to big EV1 injectors in your LS2 or L92 engine without having to cut a single thing. Each kit includes one adapter, O-ring, and spacer.
( 1 )
$12.99
—
$95.99
ICT Billet fuel injector plug adapters are plug-and-play connections which need no wiring. The sets include eight adapters to connect different fuel injectors to various wiring harnesses. Order the adapters designed for your particular application.
( 16 )
$91.99
Caspers Electronics fuel injector adapters will allow you to incorporate non-OEM fuel injector plugs into your stock wiring harness. These fuel injector adapters are available with your choice of pigtail or preterminated connections.
( 10 )
$11.99
These FAST fuel injector adapter harnesses enable easy retro-fitting of both new and old-style electronic fuel injectors. New-style fuel injectors can be used on vehicles equipped with older-style mini-timer connectors. They come complete with terminals, seals, and plugs and will plug in with no modifications.
Not Yet Reviewed
$18.95
—
$112.95
Injector Dynamics fuel injector connector adapters make converting your fuel injector harnesses a snap. These adapters are available in a variety of configurations. Choose the one needed for your application.
Not Yet Reviewed
$10.50
Do you need to convert or repair your existing multi-port fuel injection harness? These Painless Performance fuel injector wiring connectors enable you to repair crushed or broken connectors on your factory harness and will also allow you to convert over to the EV6/USCar injectors that can be found on modern multi-port fuel injection systems. Painless Performance fuel injector wiring connectors contain the necessary terminals, seals, terminal locks, and connectors to fit 8 injectors.
( 20 )
$7.99
—
$39.99
Plug-and-play with HalTech Nexus Rebel LS injector sub-harnesses. Several options are available to allow you to connect eight injectors with EV1, EV6, or Multec 2 connectors to the injector breakout connector on the Nexus Rebel LS main terminated harness. Choose the proper harness for your connections.
Not Yet Reviewed
$135.00
Motion Pro cleaner kits will help you wipe out the dirt and gain better performance. These cleaning tools flush out and clean debris and deposits from inside your fuel injectors. They're made from durable anodized billet aluminum and include a 9 V battery, along with the appropriate pigtail. Kits are available to fit most OEM Nippon Denso and HYB fuel injectors, as well as kits for EV1 injectors used on late model Harley® engines and EV6 injectors used on older engines. Armed with an aerosol can of fuel injection cleaner (not included) and Motion Pro cleaner tools, you're equipped to eliminate performance-robbing dirt.
Not Yet Reviewed
$204.99
HalTech's Elite 2000/2500 GM Gen IV LS/LSX DBW Ready terminated harness is the fastest and most cost-effective way to wire your race car or engine conversion! Simply connect a handful of labeled wires and this plug-and-play product allows you to be up and running in just a few hours. When installed in conjunction with a HalTech Elite ECU, this harness opens the door to virtually limitless performance modification and tuning of your vehicle. * Injector Connector harness options: Bosch EV1 or Bosch EV6 * Quick start guide will walk you through installation * Guide is accompanied by the full ECU manual and software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration * Programmable systems allow you to extract all the performance from your engine—by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions * Suits: Common U.S.-style Delco/Bosch GM alternator connector. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector. Manual transmission only. * Includes: Engine harness with fuse block and firewall grommet. * Notes: Please confirm your alternator connector (See the product quick start guide) and order an alternator adapter if required. (HT-040090 or HT-040091) LS2 Ignition coils and harnesses are NOT included.
Not Yet Reviewed
$670.00
HalTech's Elite 2000/2500 GM Gen IV LS/LSX Non-DBW terminated harness is the fastest and most cost-effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires and this plug-and-play product allows you to be up and running in just a few hours. When installed in conjunction with a HalTech Elite ECU, this harness opens the door to virtually limitless performance modification and tuning of your vehicle. * Injector Connector harness options: Bosch EV1 or Bosch EV6 * Quick start guide will walk you through installation of the harness * Guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration * Programmable systems allow you to extract all the performance from your engine—by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions * Suits: Common U.S.-style Delco/Bosch GM alternator connector. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector. Manual transmission only. * Includes: Engine harness with fuse block and firewall grommet * Notes: Please confirm your alternator connector (See the product quick start guide) and order an alternator adapter if required. (HT-040090 or HT-040091) LS2 Ignition coils and harnesses are NOT included.
Not Yet Reviewed
$670.00
FAST fuel injector wiring pigtails enable you to create your own wiring connection to fit the fuel injector connection. Manufactured from quality materials, they're available for either EV1 or ER6-style fuel injectors. The connectors include pin inserts; simply crimp them onto the wires and slide into the quick-disconnect wiring connectors. Order the pigtail recommended for your fuel injector application.
( 1 )
$16.95
LS Classic Series classic intake manifold kits are designed to pay respect to the classic muscle cars and trucks of the 1950's, 60's, and 70's while using modern technology for ultimate performance. The intake kits include a single-plane aluminum intake manifold, black anodized billet aluminum fuel rails, a vintage air cleaner assembly, 4150 carb adapter plate, all mounting hardware, and gaskets. These systems require a 92mm GM 4-bolt throttle body and LS3/EV6 or LS1/EV1 fuel injectors. They are compatible with GM and aftermarket engine control units and harnesses that support both drive-by-wire and speed density tuning. LS Classic Series classic intake manifolds are available to work with rectangular or cathedral port LS cylinder heads. Order the classic intake manifold kit suited to fit your application.
( 1 )
$1,521.95
—
$2,114.95
Edelbrock fuel injector adapters make it easier to supercharge your vehicle equipped with USCAR injectors. Plug them in and you're accessorized and ready for a performance upgrade. Do you have USCAR injectors? Get Edelbrock fuel injector adapters and harness the power.
Not Yet Reviewed
$137.95
DeatschWerks USCAR to Sumitomo connector adapters are designed for installing fuel injectors that don't have electrical connectors to match your harness. One end plugs directly into any fuel injector which has a USCAR connector; while the other end plugs directly into any vehicle's Sumitomo wiring harness. No soldering is required! The adapters are made from quality materials for optimum reliability.
( 1 )
$360.00
FiTech presents Ultimate LS standalone ECUs. These self-learning ECUs are offered with and without transmission control. So if you're considering utilizing a factory intake, throttle body, and injectors, FiTech Ultimate LS standalone ECUs will get your engine ready for optimal performance.
( 51 )
$959.00
—
$1,202.00
DeatschWerks fuels your passion for performance with fuel injectors specifically designed and engineered for your Sport Compact, Modern Muscle, and European vehicles. DeatschWerks fuel injectors are manufactured to fit your OE harness, fuel rail, and manifold. Because they are application-specific, you'll spend less time installing and tuning, so you can spend more time enjoying the increased performance of your ride! They provide an excellent spray pattern and atomization for optimized idle and tuning. Each set is flow-matched both statically and dynamically, and flow-balanced to within one to two percent. A flow report is included with each set of DeatschWerks fuel injectors.
( 67 )
$539.00
DeatschWerks USCAR to Jetronic connector adapters are needed when modifying or retrofitting an engine or fuel system that originally had a different type of fuel injector connector to work with Jetronic injectors. These clips are available in different quantities, and will create a proper electrical connection between your vehicle's wiring and the injectors, ensuring correct fuel delivery and performance. DeatschWerks USCAR to Jetronic connector adapters provide durable construction and seamless compatibility with plug-and-play connections.
( 2 )
$6.00
—
$210.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
