Free Shipping on Orders Over $125 at Summit Racing

Edelbrock AVS2 Series Carburetors

Edelbrock AVS2 Series carburetors are the next generation of carburetors. Featuring annular flow primary boosters, adjustable secondary air valves, and a new calibration, these AVS2 carburetors offer improved idle and cruising performance. The annular flow booster design delivers improved fuel atomization to eliminate flat spots that may be encountered when the carburetor transitions from idle to full throttle. Each annular booster features eight, equally spaced orifices to improve fuel metering. The improved flow metering makes this carburetor ideal for use with a wide variety of small-block and big-block engines with either dual- or single-plane intake manifolds.

4.73 out of 5 stars ( 859 )

$458.95

—

$619.95

Edelbrock Performer Carburetors

Edelbrock's Performer carburetors feature 2-piece, all-aluminum construction for cooler operating temperatures and less warping. There are no gaskets below the fuel bowl level for fewer leaks, and no plastic parts or power valves to blow out. The carbs use easily changed metering rods for precise tuning, non-adjustable secondary air valves—and the primary venturi booster is a bottom-feed design for smoother acceleration and better drivability. An Owner's Manual is included with every Edelbrock carburetor. The manuals consist of two sections: Section 1, Theory of Operation and tuning procedures which will help you be prepared to develop your own individualized calibration. Section 2, Tuning procedures will take you through a step-by-step procedure that will enable you to achieve a desirable calibration. For added ease of tuning, a Calibration reference chart for your model of carburetor is also included. Performer carburetors are available with a variety of options; select the model that best suits your needs.

4.77 out of 5 stars ( 1498 )

$414.95

—

$590.95

Edelbrock Carburetor Adapters

These carburetor adapters from Edelbrock allow you to use almost any carburetor on almost any intake. They will save you the hassle and expense of purchasing all-new components when changing carburetors or intakes.

4.37 out of 5 stars ( 206 )

$18.95

—

$149.95

Edelbrock Carburetor Base Gaskets

Mount your carburetor the right way with these base gaskets from Edelbrock. They ensure a positive, leak-free seal between your carburetor and manifold surfaces.

4.9 out of 5 stars ( 51 )

$17.95

—

$38.95

Edelbrock Marine Carburetors

Designed and calibrated from Edelbrock for use in marine applications, these Edelbrock carbs comply with U.S. Coast Guard safety standards. Cast surfaces are protected by a Chromate conversion coating which is used as a corrosion inhibitor. Other features include modified bowl venting, specially designed throttle shafts, an accelerator pump seal, a 3/8 in. inverted flare fuel inlet fitting, tube in airhorn for fuel pump vent, a 5 1/8 in. flame arrestor flange, a universal throttle lever, and revised secondaries for improved transient performance. Also included with every Edelbrock carburetor are instructions for installation, set up, and basic tuning.

4.76 out of 5 stars ( 71 )

$621.95

Edelbrock Carburetor Spacers

These Edelbrock carburetor spacers allow you to space your carburetor above the intake flange to increase plenum area for more torque and horsepower. Available in aluminum and heat-insulating phenolic or wood fiber, these Edelbrock carb spacers are just what you need to insulate or tune your carburetor/manifold powerband.

4.52 out of 5 stars ( 364 )

$47.95

—

$92.95

Edelbrock Performer Intake Manifold and Carburetor Kits

Edelbrock Performer intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer aluminum intake manifold, an intake gasket set, intake manifold bolts, a carburetor stud kit—and an Edelbrock Performer Series 600 cfm electric choke; a Thunder AVS 650 cfm electric choke; or a Thunder AVS 800 cfm electric choke (depending on your engine C.I.D.). The EnduraShine bright silver chrome finish is optional and resists discoloration from heat; it features a top clearcoat to enhance abrasion and chemical resistance. Edelbrock Performer intakes are designed to deliver improved throttle response over stock intakes. Are you ready for a change? Edelbrock Performer intake manifold and carburetor kits are available for small block and big block muscle car, hot rod, truck, and street vehicle applications.

4.68 out of 5 stars ( 34 )

$920.95

—

$991.95

Edelbrock Carburetor Inlet Fittings

Edelbrock carburetor inlet fittings are must-have accessories when installing or tuning your Edelbrock carburetor. These fittings are manufactured from quality materials and are available in several styles to suit all of your carburetor needs.

4.64 out of 5 stars ( 98 )

$21.95

—

$26.95

Edelbrock VRS-4150 Race and Performance Carburetors

The new line of Edelbrock VRS-4150 Race and Performance carburetors are packed with features that will appeal to racers, engine builders and carb tuners, as well as the hot street enthusiast looking to improve performance. The VRS-4150 carburetors are street friendly but race ready—and the one-piece, cast aluminum bodies fit all 4150 and 4500 carb flange manifolds—without requiring an adapter plate. With the new VRS Series carburetors many attributes, they make for easy tuning and great versatility in many applications. They are available in 650, 750, 850, and 950 cfm models, select the model suited to your application needs. Features, specs, and benefits: * A street throttle arm, PTFE-coated throttle shafts and built-in provisions for a standard GM three-wire TPS mount add features to the carburetor that are ideal for any user * Multiple vacuum hook-ups keep this carburetor usable on the street but still ready for the track with larger capacity fuel bowls and four circuit billet metering blocks with screw-in emulsion bleeds * The 20 percent larger capacity fuel bowls feature internal ribs to control fuel slosh, and a sculpted baffle directs incoming fuel to the sides to minimize bubbles * The floats have corner cuts to avoid shutting off the fuel flow during hard cornering, and jet extender notches and jet extenders in the rear to keep the jets covered in fuel under hard acceleration * Users are able to externally adjust idle bypass air as the adjustment screws are accessible without removing the air cleaner/scoop * The advanced idle circuit features interchangeable idle discharge jets in all four corners to allow for a smooth, clean idle with the use of big, low-vacuum camshafts * Normally found only in high end racing carbs, the VRS includes fully adjustable intermediate fuel circuits, which help to provide incredible throttle response * For greater control at high rpm, the high speed/main fuel circuit is split into two bleed circuits—one each for the lower and upper sections * As an additional feature, the power valves are located on both primaries and secondary's that support optimized jetting—the power valve will add fuel as necessary while the power valve protection circuit prevents diaphragm damage from backfires

4.33 out of 5 stars ( 18 )

$827.95

—

$1,047.95

Edelbrock Carburetor Float Kits

Make sure your carburetor has the fuel it needs with these Edelbrock float kits. The kits include floats, pins, and a float setting gauge, making it easy to be sure your carb is never short of the fuel it needs.

4.87 out of 5 stars ( 47 )

$23.95

—

$39.95

Edelbrock Single-Feed Fuel Line Kits

Designed to fit all Edelbrock square-bore carbs, Edelbrock single-feed fuel line kits provide a clean and custom plumbing solution for your Edelbrock carburetors. The drop-down design routes the fuel line on the right-hand (passenger side) of the carburetor below the linkage and choke housing. Edelbrock single feed fuel line kits are the right choice for your hot rod.

4.61 out of 5 stars ( 383 )

$38.95

—

$53.95

Edelbrock Performer Carburetor Maintenance Kits

Edelbrock Performer carburetor maintenance kits consist of genuine Edelbrock parts to help you rebuild or simply keep your carburetor in top notch condition. They include all of the parts and gaskets necessary to rebuild or modify your Performer carburetor for optimum performance. You put a lot of hard work and effort in your project vehicles. Make sure the parts you use are worthy of the effort and order the Edelbrock Performer carburetor maintenance kit designed for your application.

4.68 out of 5 stars ( 292 )

$47.95

—

$60.95

Edelbrock Performer EPS Intake Manifold and Carburetor Kits

Edelbrock Performer EPS intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer EPS aluminum intake manifold with either a natural aluminum finish or an EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and a Performer Series 600 cfm electric choke carburetor. The EnduraShine finish is a bright silver chrome finish that resists discoloration from heat and features a clearcoated top coat to enhance abrasion and chemical resistance. The Edelbrock Performer EPS intake uses an all-new runner design tuned to produce substantial torque increases. Ready for a change? Try Edelbrock Performer EPS intake manifold and carburetor kits for your musclecar, hot rod, truck, or ordinary street vehicle.

4.82 out of 5 stars ( 60 )

$754.95

Edelbrock Carburetor Needle and Seats

Is your carburetor running too rich or too lean? Then these Edelbrock carburetor needle and seats are just what you need to fine tune or calibrate your carburetor. Several styles are available to suit your application needs.

4.47 out of 5 stars ( 30 )

$24.95

—

$32.95

Edelbrock Throttle Solenoid and Bracket Kits

Edelbrock throttle solenoid and bracket kits are designed for square bore carburetors and raise your engine idle speed when the air conditioning is on. These kits include a 12 V solenoid and mounting bracket. The Edelbrock throttle solenoid bracket kits match perfectly with all Edelbrock Performance series and Carter AFB series carburetors.

4.0 out of 5 stars ( 57 )

$258.95

Edelbrock Carburetor Stud Kits

Edelbrock carburetor stud kits supply all of the correct studs, nuts, and washers to mount your Edelbrock carburetor correctly. These carb stud kits are must-have accessories for when installing or tuning your carburetor. The fasteners and hardware are made of steel with a variety of finishes--including cadmium plating, black oxide, and gold iridite.

4.88 out of 5 stars ( 65 )

$15.95

—

$22.95

Edelbrock Carburetor Adapter Gasket Sets

Edelbrock offers replacement gasket sets for a variety of carburetor applications, including square bore 4-hole. These fiber adapter seals are effective base plate gaskets for spread bore and square bore carb models.

5.0 out of 5 stars ( 1 )

$16.95

Edelbrock Performer Series Carburetor Calibration Kits

Edelbrock knows carbs. That's why they offer these calibration kits for Performers series carburetors. They include all the parts you need to help you get the best performance from Edelbrock carburetors.

4.53 out of 5 stars ( 201 )

$37.95

—

$96.95

Edelbrock Carburetors T-Shirts

We've added more cool designs to our line of Edelbrock T-shirts. These 100 percent cotton tees are available in a variety of sizes and designs to fit your needs.

4.56 out of 5 stars ( 9 )

$6.50

Edelbrock Heat Insulator Gaskets

Edelbrock heat insulator gaskets are designed to help prevent fuel percolation in Performer series carburetors exposed to extreme underhood temperatures. They are available in both open and ported styles, and come complete with extended-length carburetor studs.

4.67 out of 5 stars ( 233 )

$32.95

—

$43.95

Edelbrock Performer Remanufactured Carburetors

Edelbrock Performer remanufactured carburetors are professionally and completely disassembled, inspected, and cleaned before reassembly. Any parts that don't pass strict performance standards are replaced with brand new parts. These carburetors feature 2-piece, all-aluminum construction for reduced operating temperatures and less warpage. There are no gaskets below the fuel bowl level for fewer leaks, and no plastic parts or power valves to blow out. The carbs use easy to change metering rods for precise tuning, and the primary venturi booster is a bottom-feed design for smoother acceleration and better drivability.

4.25 out of 5 stars ( 44 )

$394.95

—

$414.95

Edelbrock Carburetor Gasket Kits

Edelbrock carburetor gasket kits are made to signify the high standards and performance that Edelbrock is known for. Edelbrock gasket kits seal intakes, heads, carb-to-manifolds, and other components. You can trust the quality of Edelbrock carburetor gasket kits to protect your engine.

4.92 out of 5 stars ( 26 )

$20.95

Edelbrock Carburetor Metering Block Gaskets

Tuning your own carburetor can mean replacing gaskets several times during testing. Edelbrock offers a good selection of metering block gaskets so that you'll always have what you need. These black fiber gaskets are high-quality replacements for your carburetor.

Not Yet Reviewed

$18.95

—

$20.95

Edelbrock AVS2 Series Carburetor Calibration Kits

Edelbrock AVS2 Series carburetor calibration kits contain all the necessary metering rods and jets that will allow you to adjust your AVS2 carburetor—either richer or leaner for both cruising and power modes. Several kits are offered, each consisting of an assortment of jets, step-up springs, metering rods, retaining springs, replacement hairpin springs, and a calibration chart that tells which rod/jet combination to use for your carburetor model. A handy reusable storage case is included to hold kit contents. Order the kit recommended for your carb application.

4.17 out of 5 stars ( 76 )

$82.95

—

$90.95

251 Results Found For "edelbrock carburetor"