Free Shipping on Orders Over $125 at Summit Racing

Ford Performance Parts 5.0L Coyote Gen 4X Crate Engines

Ford Performance Parts 5.0L Coyote Gen 4X crate engines are modern 5.0L 32-valve DOHC V8s that utilize advanced features, such as direct and port fuel injection, twin independent variable camshaft timing (Ti-VCT), high-flow aluminum cylinder heads, and 12:1 compression to deliver 460 hp and 420 lb.-ft. of torque (with premium fuel). The all-aluminum cylinder block features plasma transferred arc spray-in liners, cross-bolted main bearing caps, and thick main bearing bulkheads for strength. Ford's Gen 4X 5.0L Coyote features a single 80mm throttle body for easier packaging in various applications. Features and specs: * Hypereutectic aluminum pistons * Sintered steel connecting rods as used on the Boss 302 Mustang * Forged steel crankshaft * Single 80mm "drive-by-wire" throttle body * 9.5 qt. steel oil pan * Composite lightweight intake manifold * Mustang GT 409 stainless steel exhaust manifold—right side only * Engine mount bosses and bellhousing mount pattern common to 5.0L modular engines * 10R80 flexplate included * Engine weight: 445 lbs. without front accessory drive components Note: Driver side exhaust flange utilizes 5.2L pattern

Not Yet Reviewed

$11,704.99

Ford Performance Parts 5.0L Coyote Gen 4 Aluminator SC Crate Engines

Built for high performance applications, the Ford Performance 5.0L Coyote Gen 4 Aluminator SC crate engines are a powerhouse—ideal for custom race builds and 2024 GT Mustangs. While the Aluminator block, cylinder heads, oil pan, and intake manifold are factory pieces, Ford Performance replaces the hypereutectic pistons and sintered-steel rods with Mahle forged slugs, ARP 2000 rod bolts, and Manley forged H-beam rods, keeping the factory 12.0:1 compression ratio in naturally aspirated form and 9.5:1 on its boost-ready Aluminator crate. These flagship crates are quite popular with Ford diehards in the custom car and street rod world—because who really wants to put a Chevy LS in a deuce coupe? Crate engine features and specs: * Fits 2024+ Mustang GT * 5.0L (302 cubic inches) * 9.5:1 compression ratio (nominal) * Mahle hard anodized forged pistons with Grafal low friction coating * Manley H-beam connecting rods with ARP 2000 bolts * Forged steel crankshaft * Uses production 2024 Mustang GT aluminum block * 2024+ Production oil pan * Tuned composite Mustang GT intake manifold with production dual drive-by-wire 80mm throttle bodies with variable runner control * Four-valve-per-cylinder aluminum heads with roller-finger followers reduce friction. * Mustang GT production camshafts * Includes Ford Performance colder, heat range zero spark plugs (M-12405-M50A) * Includes Ford Performance oil filter (M-6731-FL820) * Includes billet steel gerotor oil pump gears (M-6600-M50A) * Vehicle harness and PCM not included * Does not include alternator (for alternator kit: refer to part numbers M-8600-M50BALT or M-8600-M50ALTA) * Engine mount bosses and bell housing mount pattern common to 4.6L modular engines * Does not include exhaust manifolds

Not Yet Reviewed

$15,261.99

Ford Performance Parts 2024 7.3L Super Duty Long Block Crate Engine

Ford Performance Parts 7.3L V8 Ford gasoline crate engine from the 2024 F250 Super Duty is loaded with great features for your build. Features: * 7.3L displacement * Bore 107.2mm x stroke 101.0mm * 430 hp at 5,500 rpm * 485 lb.-ft. of torque at 4,000 rpm * 10.5:1 compression * Cast iron block * Aluminum cylinder heads * Intake valve diameter 55.13mm * Exhaust valve diameter 42.53mm * Lift (intake/exhaust) 13.67mm/15.26mm * Cam-in-block OHV design with variable cam timing * Forged steel crankshaft * Cast aluminum pistons * Port fuel injection * Firing order: 1-5-4-8-6-3-7-2 Each engine assembly includes: * Composite intake manifold * 87mm throttle body * Left and right exhaust manifolds * 8-qt. aluminum oil pan/cooler * Ignition coils and wires * Production flexplate * Factory lift brackets * M-6038-73 shipping and storage cradle * Bellhousing bolt pattern same as 4.6/5.4 and 5.0 Coyote * Engine weight: 580 lbs.

Not Yet Reviewed

$8,797.99

Ford Performance Parts 2024 Gen 4 5.0L 480 HP Coyote Long Block Crate Engines

Ford Performance Parts 2024 Gen 4 5.0L 480 hp Coyote engines are the latest all-aluminum crate engines from the 2024 Mustang GT. These modern 5.0L 32-valve DOHC V8s use advanced features, such as direct and port fuel injection, twin independent variable camshaft timing (Ti-VCT), high-flow cylinder heads, dual throttle bodies, and a heightened compression ratio to deliver 480 hp and 415 lb.-ft. of torque (with premium fuel). These lightweight plasma-transferred wire-arc spray aluminum cylinder blocks feature cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength, and an optimized oil drain back and windage control to improve high-rpm performance. Available with production flexplate (automatic) or dual mass flywheel (manual) and both include engine harness. Engine specs: * 480 hp at 7,150 rpm * 415 lb.-ft. of torque at 4,900 rpm * 12.0:1 compression ratio * Bore 93mm x stroke 92.7mm * Hypereutectic aluminum pistons * Sintered steel connecting rods as used on BOSS 302 Mustang * Forged steel crankshaft * Aluminum block with plasma transferred wire arc spray weld liner coating * Longer, 12mm head bolts for higher clamp load * 9.5 qt capacity steel oil pan * Tuned composite intake manifold provides efficient air delivery and weight savings * Twin 80mm single bore drive-by-wire, electronic throttle bodies with variable runner control * High-flow aluminum cylinder heads, dual overhead camshaft (DOHC), four valves per cylinder, variable intake and exhaust camshaft timing * Engine mount bosses and bellhousing mount pattern common to 5.0L modular engines * Mustang GT 409 stainless steel tubular exhaust manifold on the RIGHT SIDE ONLY

5.0 out of 5 stars ( 1 )

$11,701.99

Ford Performance Parts 5.0L Gen 3 Aluminator Short Block Crate Engines

Ford Performance Parts 5.0L Gen 3 Aluminator short block crate engines are hand assembled using quality high-performance internal parts. Offered in two compression ratios, they serve as a strong foundation for the enthusiast that wants to spec and finish a Coyote build to his or her particular application and needs. Ford Performance engineers have taken care of the toughest part of building a new engine by designing a strong and durable short block that offers a wide range of power possibilities. Additional features and specifications: * 5.0L (302 cu. in.) * Precision internal balanced * Available in 12.0:1 or 9.5:1 compression ratio * Forged steel crankshaft * Mahle hard anodized forged pistons with Grafal low-friction coating * Manley H-beam connecting rods with ARP2000 bolts * 2018+ (Gen 3) production block features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength * Accepts Gen 1, 2, 3 or GT350 cylinder heads with corresponding generation head gasket * Assembled and ready for Coyote heads, cams, timing set, and oil system

Not Yet Reviewed

$5,947.99

—

$7,152.99

Ford Performance Parts Megazilla Crate Engines

The Ford Performance Parts engine team has unleased the 7.3L Megazilla crate engine! The Megazilla features the Ford Performance 7.3L intake manifold, CNC-ported cylinder heads, forged pistons and connecting rods. The Megazilla crate engine cranks out 612 hp and 670 lbs.-ft. of torque in a streetable package running on premium pump gas. Megazilla crate engine features: * 7.3L displacement * 10.5:1 compression * (M-6049-SD73P/M-6050-SD73P) CNC-ported aluminum cylinder heads * (M-9424-73LP) low-profile intake manifold * (M-9926-M5292) 92mm throttle body * Mahle forged pistons * Callies H-beam forged connecting rods * (M-6303-SD73) production steel crankshaft * (M-6250-SD73A) hi-performance 7.3L camshaft w/ VCT delete * (M-6010-SD73) production cast iron block Peak power output (J607 standard): * 612 hp @ 5,580RPM * 670 lbs.-ft. of torque @ 3,920RPM * Over 500 lbs.-ft. of torque from 2,500 rpm to 6,000 rpm Assembly includes: * Coils/plug wires/spark plugs * Production oil pan * (M-6038-73) shipping/storage cradle * Production engine wiring harness Additional information: * Bellhousing bolt pattern same as the Ford 4.6/5.4 and Coyote 5.0L * For control packs, please refer to part number: M-6017-73M and M-6017-73A (sold separately) * Custom calibration required * For starter, please refer to part number: M-11000-SD73 (sold separately) * For FEAD, please refer to part number: M-8600-SD73 and M-8600-SD73AC (sold separately) This part is designed and intended for competition use only or off-highway use only. It should not be installed on a vehicle that is driven on public roads and highways. Installation of this part on a vehicle driven on public roads and highways is likely to violate U.S. and Canadian laws and regulations relating to motor vehicle emissions.

Not Yet Reviewed

$23,397.99

Ford Performance Parts 5.0L Crate Engine Control Packs

Ford Performance Parts Coyote 5.0L crate engine control packs are designed to properly wire Ford Performance Parts 5.0L modular crate engines. They include a specially-calibrated PCM, an electronic throttle control accelerator pedal, an air intake assembly, an MAF sensor, and all necessary wiring and harness adapters. You can eliminate the complexity of wiring modular 5.0L crate engines with one of these Ford Performance Parts engine control packs. Additional technical information: * Control pack M-6017-504V available for 2015-16 5.0L 4V Coyote engines, M-6007-M50A and M-6007-A50NAA 5.0L 4V Ti-VCT crate engines with manual transmission; M-6007-A50SCA and truck engines require modifications * Control pack M-6017-A504VA available for 2011-14 5.0L 4V Coyote engines, M-6007-M50 and M-6007-A50NA 5.0L 4V Coyote crate engines with manual transmission (adds wiring for Speed Dial M-4209ADPT-AC to pick up transmission output speed); M-6007-A50SC, M-6007-A50XS, Boss 302 and truck engines require modifications * Supercharged engines, M-6007-A50SC, M-6007-A50SCA, M-6007-A50XS, Boss 302 and truck engines require custom calibration * Electronic throttle control accelerator pedal eliminates throttle cable routing problems * Unique controls pack harness replaces stock body harness and is designed for street rod installation * Features OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis * Includes power distribution module, air box, air inlet tube, MAF sensor, upper and lower radiator hoses and HEGO sensors * PCM (remanufactured) with Ford Performance calibration requires return-type fuel system, will not work with returnless fuel system * Installation of this PCM in a 2011-16 Mustang GT will result in a no-start condition * Not for use with a 2015-16 F150 engines

3.67 out of 5 stars ( 3 )

$2,149.99

Ford Performance Parts 2021-23 Coyote 5.0L Control Packs

Take the complexity out of wiring your Gen 4X 5.0L Coyote crate engine with a Ford Performance Parts control pack. Ford Performance Parts 2021-23 Coyote 5.0L control packs are available to run the crate engine with a Mustang 10R80 automatic transmission or a manual transmission. Choose the control pack needed for your build. Control packs feature: * PCM with unique Ford Performance calibration * Electronic throttle pedal eliminating cable routing issues * Unique harness replaces the stock body harness and is designed for custom vehicle installation * OBD-II port for trouble-shooting/code reading * Power distribution module, air box, air inlet tube, upper and lower radiator hoses, and HEGO sensors are included * Requires return-type fuel system

5.0 out of 5 stars ( 1 )

$2,322.99

—

$2,462.99

Ford Performance Parts Coyote 5.0L High Output Alternator Kits

Ford Performance Parts Coyote 5.0L high-output alternator kits include a higher tension belt tensioner, idler pulley, belt, and mounting hardware. They feature the same 200 amp high-output alternator used on 2018-19 Mustang GTs with heated/cooled seats and fit Mustang 5.0L Coyote engines (as well as many other Ford Performance crate engines). Don't leave your engine starving for amps; order a high-output alternator Coyote 5.0L kit.

4.5 out of 5 stars ( 4 )

$479.99

Ford Performance Parts 5.0L Coyote Power Module with T-56 Manual Transmission Combo Kits

Ford Performance Parts has the complete solution for your drivetrain upgrade needs with the 5.0L Coyote manual power module and T-56 manual transmission combo kit, which includes: * Gen 4X 5.0L Coyote crate engine * Tremec 6-speed manual transmission * Complete engine controller and wiring harness (control pack) It's Next Generation 5.0L power all in one complete powertrain kit. The crew at Ford Performance have spec'd out a kit to simplify the swap of the newest, most innovative 5.0L Coyote engine into just about any Ford vehicle. The Coyote power module teams the Gen 4X 5.0L Coyote V8 with a state-of-the-art Tremec 6-speed transmission, plus all the electronics and hardware to finish the installation. The engine features direct and port fuel injection, twin independent variable camshaft timing, and a lightweight plasma transferred wire arc spray aluminum engine block. Coyote power modules simplify both the shopping and build experience by kitting up the right parts that are matched to deliver potent performance with civilized drivability. The engine control pack is truly plug-and-play and simplifies conversions to a modern electronically fuel injected V8 high performance engine. Details and/or specs: * Gen 4X 5.0L Coyote engine * 460 hp at 7,000 rpm * 420 lbs.-ft. torque at 4,600 rpm * 12.0:1 compression ratio * Aluminum block * Boss 302 alternator kit * Starter and starter index plate * Control pack PCM and installation kit is tunable for power upgrades * Runs on pump gas * Steel Quicktime bellhousing * Roller pilot bearing * Tremec 6-speed transmission 2.66 1st gear * Clutch fork / throw-out bearing * Clutch kit * Billet flywheel * Installation hardware * Note: Engine will be fitted with an automatic flexplate. Included is a billet flywheel, to be installed on engine before installation into vehicle.

Not Yet Reviewed

$20,262.99

Holley EFI Ford Coyote Ti-VCT Control Modules

Get Ford Coyote twin independent variable cam timing (Ti-VCT) control from Holley EFI. Do you have a Coyote crate engine going in your dream car? Is your weekend road race warrior powered by a Coyote junkyard engine with locked cams? Unlock the full potential of your high-revving power plant with the Holley EFI plug-and-play Coyote Ti-VCT control module! Product features: * Compatible with HP or Dominator EFI * Ti-VCT cam control down to 400 rpm * User-programmable tables enable end user to fine-tune aftermarket Ti-VCT-compatible camshafts * Commanded timing matched within 1 degree * 4 built-in diagnostic LEDs make diagnostics easy in the event of a cam or crank sensor failure * Integrated stock cam position tables eliminate tuning guesswork; optimal drivability and power right out of the box * Main harnesses come terminated with Ford TPS and IAC connectors—making it easy to convert from a DBW throttle body to a manual throttle body, if desired * Installation of an external MAP sensor is required (Holley MAP sensors recommended for naturally-aspirated applications) * Main harnesses include a power tap connector as a convenient source for power and grounds when adding additional sensors or actuators * CANBus communication between Coyote Ti-VCT and Holley EFI ECU for high-speed data transfer and diagnostics * Pre-calibrated Ford sensor drop-downs in the Holley EFI software * Plug-and-play main harness for 2011-17 Coyote engines with stock camshafts using stock coils or Holley EFI Smart coils (Holley EFI systems main wiring harnesses)

Not Yet Reviewed

$1,449.95

Edelbrock E-Force Coyote 8-Rib Belt Drive Upgrade Kits

Edelbrock E-Force 8-rib belt drive upgrade kits are intended to upgrade the factory Ford 5.0L Coyote 6-rib belt drive system to an 8-rib to help reduce belt slip encountered in high boost applications with a smaller pulley. It is an ideal upgrade for an E-Force equipped Mustang GT, F-150, or crate engine. Each kit includes a water pump pulley, alternator pulley, harmonic damper, all necessary idler pulleys and tensioners, and hardware. E-Force 8-rib supercharger pulleys are sold separately and are available in sizes from 2.625 in. up to 3.250 in.

5.0 out of 5 stars ( 1 )

$2,441.05

Borla S-Type CrateMufflers

"Lead the Heard" with Borla S-Type CrateMufflers. Specifically designed, engineered, and tuned to optimize the power and sound of your classic stock, crate, or custom-built engine, they deliver the intoxicating Borla "Sound of Power" with every squeeze of the throttle. They feature an enhanced combination of packing filament, straight-through core dimensions, perforation patterns, and cylindrical shapes. Purpose-built from aircraft-grade, T-304 stainless steel, they offer a race-inspired design to relieve the most restriction possible and bring the most power out of your engine. They feature an easily maintained finish, ensuring long-lasting showroom looks.

4.65 out of 5 stars ( 23 )

$477.99

Ford Performance Parts 2024 Mustang 5.0L Engine Covers

Dress up your Gen 4 Coyote crate engine compartment with a 2024 Mustang 5.0L engine cover from Ford Performance Parts. These fuel rail and coil covers are manufactured from plastic with a black/silver finish and a black/red logo. Notes: * Fits 2024 Mustang 5.0L * Fits M-6007-M50D and M-6007-M50DAUTO crate engines * Does not fit Gen 1, 2 or 3 Coyote crate engines

5.0 out of 5 stars ( 1 )

$84.99

Borla ATAK CrateMufflers

Borla ATAK CrateMufflers will optimize the sound and performance of your crate and custom-built motors. Get the loud, deep growl you crave from an aircraft-grade T-304 stainless steel exhaust. ATAK (acoustically tuned applied kinetics) technology produces the highest dB levels, avoiding distortion to retain clarity—and the mufflers are custom-tuned for your specific vehicle. Let Borla help you achieve the perfect exhaust note for your custom build. Order the CrateMuffler size and configuration for your vehicle application.

4.54 out of 5 stars ( 65 )

$487.99

—

$489.99

Lokar Drive-By-Wire Electronic Throttle Controls

Lokar drive-by-wire electronic throttle controls are the first programmable electronic throttle controls for the automotive aftermarket. These billet aluminum controls feature a non-contact, solid-state Hall effect sensor and are available, pre-programmed, from the factory for most GM, Ford, and Mopar applications. These controls are programmed to optimize electrical output for quicker throttle response, producing no pedal lag and three times the performance of OEM pedals. They also offer improved operator control and pedal stability over rough terrain making them ideal for high performance and off-road applications. The controls include an application-specific pedal wiring harness that works in conjunction with the OEM or aftermarket EFI wiring harnesses. These Lokar electronic throttle controls are available with a brite or black anodized finish and are designed for use with one of Lokar's drive-by-wire pedal assemblies which are sold separately and available in a variety of styles and finishes to match your custom application.

5.0 out of 5 stars ( 8 )

$594.95

—

$594.99

16 Results Found For "coyote crate engine"