Availability
Allstar Performance spring cups hold your springs in place. They're made from lightweight steel and will work with different spring and jack bolt sizes.
Not Yet Reviewed
$23.99
—
$26.99
Allstar Performance "Swiveler" spring cups help to eliminate binding between the spring cup and jack bolt. The steel spring seats employ a mono-ball and stud, allowing cups to pivot as needed. This prevents binding during suspension travel—and the extended length cups help keep springs centered. Multiple styles are available, each with a zinc plating to protect against corrosion.
Not Yet Reviewed
$57.49
—
$66.99
WEHRS introduces the new David Stremme-inspired spring cups, which raise the spring to enable you to run the RR shock bulb up and have trailing arm clearance. WEHRS changed the design to capture the spring by the O.D.—in order to keep the spring linear through suspension travel. This cup works with any 5/8 in. shaft shock or slider.
Not Yet Reviewed
$114.99
Clearance
WEHRS swivel spring cups offer several benefits, primarily focused on improving vehicle handling and stability by allowing for spring movement and alignment. They enable the spring to rotate and adjust its angular position, which can help the car gain side bite, particularly on race cars or vehicles used in challenging terrain. Additionally, swivel cups help keep the spring straight through travel, allowing for potential twisting motion and potentially enhancing performance. WEHRS offers swivel spring cups in various swivel cup designs, including those with different drop heights and bearing options to allow users to choose the best fit for their specific needs.
Not Yet Reviewed
$100.99
$69.50
—
$79.99
Allstar Performance lightweight bump spring cups are made from 6061-T6 aluminum and have a black anodized finish for added durability. The cups feature a bronze bushing, allowing the shock shaft to move freely during suspension travel, and are sized for use with Hypercoil and most Landrum bump springs. Order the bump spring cup suited to fit your application.
Not Yet Reviewed
$24.99
These Allstar Performance swiveler spring cup sleeves are made of steel and are zinc coated. They are used in place of a standard upper spring plates and jack bolts on vehicles using conventional-style coil springs. Their mono-ball stud mount allows the cup sleeves to pivot as needed to prevent binding during suspension travel. If you're looking for cup sleeves, look no further than Allstar Performance swiveler spring cup sleeves.
( 1 )
$22.99
WEHRS Machine Racing Products offers a variety of suspension parts and tools, including these OD alignment spring cups. They capture the coil spring by the OD and keep it straight through travel. The cups also allow you to run WEHRS WM165BO bearing to let the spring twist through travel. Order the size and style needed for your applications.
Not Yet Reviewed
$82.99
WEHRS mid-length spring cups are often used on race cars and other vehicles where a mid-range suspension travel is desired. They offer a balance between spring retention and travel, preventing spring binding and allowing for a wider range of motion. Utilizing quality materials, these spring cups are designed to keep the spring in place without being overly long, which can lead to the cup bottoming out. The mid-length design, like the 4 in. tall cup, helps to prevent the spring from binding against the cup when the suspension is compressed. The shorter height allows for a more natural and unrestricted range of motion for the spring, improving suspension performance. Most WEHRS mid-length spring cups are typically bolt-in designs, simplifying installation and providing a secure fit.
Not Yet Reviewed
$46.99
Keyser Manufacturing spring cups seat your springs. These cups are crafted from zinc plated steel. Keep your coil springs in the right position with the quality and value of Keyser spring cups.
Not Yet Reviewed
$20.99
Proper chassis setup is an important component in finding your way to victory lane. The best way to achieve the desired balance is to make sure your springs are in perfect harmony to get you to the finish line first. Longacre Racing offers their load rating machines to help you set up your race car. The machine will only go so far without the proper accessories. These spring rate tester components will let you test a variety of springs for whatever you have on your car.
Not Yet Reviewed
$112.99
ICON Vehicle Dynamics 2021-23 Ford Bronco coil cup seat kits are used when upgrading an existing pair of ICON 2.5 Series Bronco rear coilovers equipped with spring part number 148350 with the ICON Heavy-Rate Rear Coil Kit. Over time, different revisions of the ICON triple-rate rear Bronco coil have required coil seats of varying heights to achieve proper ride height. These precision CNC-machined, anodized aluminum coil cup kits are the correct height to be used with the ICON Heavy-Rate Rear Coils to achieve the ICON recommended rear ride height. Additional notes: * Direct fit for ICON 2.5 Series Bronco rear coilovers * CNC-machined 6061 T6 aluminum construction * Black anodized for sleek look and corrosion resistance
Not Yet Reviewed
$175.44
These Keyser Manufacturing spring cup shims are designed to eliminate binding between the spring cup and the jack bolt. They are manufactured from durable steel and are available with different diameter center holes to accommodate your jack bolt.
Not Yet Reviewed
$3.99
—
$4.99
Keep your springs centered with Allstar Performance bolt-on upper spring plates. These spring cups bolt to internal thread jack bolts to keep your springs centered to the jack bolt. Allstar upper spring plates are available in naturally finished aluminum or lightweight steel with a black finish to fight off corrosion.
( 2 )
$17.99
ICON Vehicle Dynamics dual rate spring kits offer incredible ride quality, handling, and performance. Available for front and rear, they allow a softer initial rate for on-road comfort and a firmer secondary rate for stability and bottoming resistance off-road. Whether you're hauling payload, loaded for an expedition, just carrying a spare tire, or a spirited off-road driver, Icon offers a selection a dual rate coil springs to successfully meet your needs for suspension support.
( 3 )
$337.85
Allstar Performance lower spring plates will keep your springs in line. These steel plates weld to 3 in. diameter rear-end tubes and work with conventional-style 5 in. coil springs. Allstar lower spring plates have a black finish to fight off corrosion.
( 3 )
$13.99
Lots of trickery is built into WEHR coil spring sliders, making them the smoothest and most stable sliders on the market. They feature a linear DU bushing on a hardened shaft, along with a shaft-stabilizing internal piston. There's no need to unscrew the nut to remove the spring—the spring cup opposite the adjusting nut is quickly removed with a clip. A 4-position locking mechanism assists with fine-tuning, and the Torrington bearing on the adjuster nut allows for easy adjustment and bind-free spring travel. Order the length needed for your application.
( 2 )
$279.99
RideTech spring retainer cups are optional components that drop your coil springs down from the top mount. Depending on your application, they may help resolve clearance issues on the upper mounts. For anything and everything suspension related, check out RideTech to keep your vehicle's handling smooth and comfortable.
( 3 )
$30.00
Arnott suspension strut and coil spring assemblies are "Engineered to ride and built to last". Offering high-quality at a competitive price, these shocks and struts deliver the stability, handling, control, and comfort of the original OE shock without any external commands from the vehicle. Arnott engineers have determined and tested the optimal internal shock settings to mimic the OE performance. Features and benefits: * Custom-valved shock adapted to driving style * Improved seals to prevent leaks * Electronic to passive shock technology
( 2 )
$289.00
—
$654.90
Integra adjustable bump stop cups eliminate the need to cut bumpers or install packers to shim your bumper to the desired height. A simple twist of the bumper cup housing raises or lowers the position of the bumper inside of the housing. Integra bump stop cups can accommodate a variety of bumpers, including roller skate wheel, puck, and Christmas tree styles, and they fit the full line of Integra shocks, as well as Penske, ARS, AFCO, PRO, and most other shock brands. Integra adjustable bumper cups are machined from aircraft-grade billet aluminum, have nearly an inch of total travel, feature detent adjustments for positive positioning, and are available for coilover and non-coilover applications.
Not Yet Reviewed
$166.99
Isky PSI sportsman drag race valve springs are manufactured from high-strength alloy steel, for dependable performance you can trust. PSI (Performance Springs Inc.) is quite simply one of the modern racing industry's top manufacturers of racing-only valve springs. In the past few years, more professional racing championships, from Winston Cup and IRL to NHRA Pro Stock, have been won using PSI valve springs than any other brand. Do not settle for those foreign-made springs of lesser quality. Insist on genuine PSI Drag Race Valve Springs and get into the winners circle!
Not Yet Reviewed
$369.99
—
$614.99
Integra non-adjustable bump stop cups safely contain and support Integra Christmas tree-style bump stops. They're available for both coilover and standard shocks. Made from aluminum, they ensure exceptional strength that will withstand the rigors of your race car's suspension. Get your suspension tuned the right way with Integra non-adjustable bump stop cups.
( 1 )
$23.99
WEHRS spring bars offer fine-tuned traction control and allow for precise adjustment of a car's spring setup. The spring bars can be used with a variety of springs and can be adapted for different applications, enabling users to build custom rate curves, with or without internal pucks. The spring bars design includes a clip-release mechanism for quick and easy removal of the spring cup, eliminating the need to unscrew the adjuster nut. The spring style pull bar comes standard with brake separate from pull side and also has a long bronze bushing to eliminate shaft flex under load. The jam-nut locking system and Torrington bearing on adjuster nut allows for precise and easy adjustment of the spring preload. In addition, the use of OD alignment cups (like the WM165BO and OD cups) helps to reduce or eliminate spring bow, especially when using softer springs.
Not Yet Reviewed
$505.99
McGaughy's Suspension is the industry leader in the lowering and drop kits. All McGaughy's suspension lowering kits are exclusively designed, tested, and test fit for each application. Their lowering kits are of the highest quality found in the industry today. Competitors have tried to copy McGaughy's patented spindles and components for years and were stopped in their tracks. Their only way around McGaughy's rock solid patents was to change their designs in a way that drastically and negatively affected their products.
( 233 )
$463.99
Lingenfelter LSX valve spring and retainer kits offer premium dual valve springs. They add lightweight titanium spring retainers, valve locks, spring seat cups, and OE-style valve seals to complete your valvetrain job. Order the set with size and pressure options needed for your application.
Not Yet Reviewed
$569.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
