Free Shipping on Orders Over $125 at Summit Racing

Classic Instruments Speedbox 2.0 Speedometer Interfaces

Classic Instruments Speedbox 2.0 speedometer interfaces are the ultimate solutions for effortlessly upgrading your cable-driven mechanical speedometer. They are designed to operate a cable-driven mechanical speedometer using an electric speed signal from GPS, CAN-bus speed data through the OBD-II, or vehicle speed sensor (VSS). Assembled with high-quality components, each CI SpeedBox 2.0 interface requires only a 12 V and ground for a hassle-free, plug-n-play install that eliminates the need for tedious calibration or subscription services. Features: * Fits Ford, GM, and Chrysler speedometers only * Easy plug-and-play connections to make the conversion painless * Can retain factory speedometer look for specific barrel type speedos * Can be installed in the dash or under the hood, but is not waterproof * Converts cable-driven mechanical speedometers to support electronic inputs

Not Yet Reviewed

$460.95

OMIX-ADA Speedometer Gauges

Getting your Jeep's dash gauges looking and working like new has never been so easy! These OMIX-ADA speedometer gauges fit a variety of Jeep models and include all the features you want. They're built to meet or exceed the factory specs. Why settle for anything less? Equip your Jeep with the best—OMIX-ADA!

3.5 out of 5 stars ( 34 )

$189.99

Hypertech Speedometer Calibrators

Changing tire and gear sizes can have an adverse effect on your speedometer and odometer readings. To correct this, Hypertech has assembled some of the best features from their series of programmers and tuners into one stand-alone unit. Hypertech speedometer calibrators will adjust for a wide range of tire sizes and gear changes (not all applications can adjust for gear changes) to keep your speedometer reading properly without the additional cost of buying a complete tuner. Installation is as easy as plugging one of the calibrators into your vehicle's OBDII diagnostic port, and while you're there, they can even read and clear diagnostic trouble codes.

4.23 out of 5 stars ( 47 )

$224.21

—

$279.95

Speedhut CJ Jeep GPS Speedometer Cluster Gauge Kits

Speedhut's CJ Jeep GPS Speedometer Cluster gauge kits are your OEM replacement solution, combining three essential gauges in a precision-engineered, space-saving unit. The GPS Speedometer aspect eliminates the hassle of traditional speed sensors, offering easy installation and a waterproof GPS antenna. Forget the hassle of entering tire sizes or gear ratios—no calibration is needed, making it an effortless setup. Operating worldwide with free GPS technology and no subscription, it's a one-way system that solely receives data without transmitting. Paired with the fuel level and temp gauges, this dynamic cluster offers a comprehensive solution for maximizing your driving experience, making it the ultimate tool for navigating the road with absolute confidence. And with Speedhut, you get to choose how you want to customize your gauges just the way you want to meet your specific needs and match your style! It's easy! First choose the gauge style you like, then select the dial face, bezel, pointer, and number and tick options to create the gauge of your dreams. Speedhut has been pioneering gauge customization for motorheads around the world—since 2001. With high-end components and cutting-edge manufacturing processes, they have reinvented the possibilities of gauge customization and handed the controls off to the everyday driver. From design and circuitry to programming and assembly, each gauge is meticulously produced by their skilled technicians—one gauge at a time. Product Overview: * Internal microprocessor for pinpoint accuracy in readings * High torque stepper motor guarantees pointer precision in any racing condition * Solid billet aluminum bezel for added durability and aesthetic appeal * Weather-resistant design for durability in any conditions * Mounts behind dash with brackets like factory gauge * Backed by manufacturer lifetime warranty for peace of mind and dependability * Proudly made in America, ensuring quality and craftsmanship

4.77 out of 5 stars ( 13 )

$534.97

—

$589.50

Speedhut Dual GPS Speedometer and Tachometer Gauge Combos

Experience the next level of precision and versatility with Speedhut's Dual GPS Speedometer and Tachometer gauge combos. These gauges utilize GPS technology to deliver real-time, accurate speed readings—without the hassle of traditional speed sensors. Installation is a breeze, requiring only 12 V power and a waterproof GPS antenna that conveniently mounts anywhere in your vehicle. Forget the hassle of entering tire sizes or gear ratios—no calibration is needed, making for an effortless setup. Operating worldwide with free GPS technology and no subscription, it's a one-way system that solely receives data without transmitting. Paired with the tachometer, this dynamic duo offers a comprehensive solution for maximizing your driving experience. And with Speedhut, you get to choose how you want to customize your gauges just the way you want to meet your specific needs and match your style! It's easy! First choose the gauge style, then select the dial face, bezel, pointer, and number and tick options to create the gauge of your dreams. Speedhut has been pioneering gauge customization for motorheads around the world—since 2001. With high-end components and cutting-edge manufacturing processes, they have reinvented the possibilities of gauge customization and handed the controls off to the everyday driver. From design and circuitry to programming and assembly, each gauge is meticulously produced by their skilled technicians—one gauge at a time. Additional Features: * Internal microprocessor for pinpoint accuracy in readings * High torque stepper motor guarantees pointer precision in any racing condition * Slim case and convenient spin-lock ring for effortless mounting * Solid billet aluminum bezel for added durability and aesthetic appeal * Weather-resistant design for durability in any conditions * Mounts behind dash with brackets like factory gauge * Backed by manufacturer lifetime warranty for peace of mind and dependability * Proudly made in America, ensuring quality and craftsmanship

Not Yet Reviewed

$378.60

—

$395.06

Speedhut JDM Datsun Z Series GPS Speedometer and Fuel Level Gauge Combos

Experience the next level of precision and versatility with the Speedhut JDM Datsun Z Series GPS speedometer and fuel level gauge combos. These gauge combos modernize classic Datsun Z-cars by replacing inaccurate, aging stock instruments with a single unit, providing precise, satellite-driven speed data and fuel levels, eliminating the need for traditional cable-driven speed sensors or complex calibration. Rugged build ensures durability in challenging environments, and Speedhut allows customization of these gauges, including the dial face, bezel, pointer, and number and tick options to create the gauge of your dreams. Speedhut has been pioneering gauge customization for motorheads around the world—since 2001. With high-end components and cutting-edge manufacturing processes, they have reinvented the possibilities of gauge customization and handed the controls off to the everyday driver. From design and circuitry to programming and assembly, each gauge is meticulously produced by their skilled technicians—one gauge at a time. Key purposes and benefits: * Integrated functionality—combines a speedometer and fuel level gauge into a single, space-saving unit, reducing dashboard clutter * Built tough to perform for reliability with microprocessor-driven for real-time accuracy—replaces 40+ year old, non-functional, or inaccurate electronics with a weather-resistant, durable unit * High-Accuracy speedometer—uses GPS technology for precise speed tracking, unaffected by tire size or gear ratio changes * JDM aesthetics—designed specifically to match the look of the classic Datsun Z series, offering a vintage appearance with modern, high-torque stepper motor precision, and smooth, accurate pointer * Worldwide coverage—free GPS signals, no subscriptions * Easy plug-and-play installation—connect 12-volt power, mount GPS antenna, and drive—bypassing complex transmission sensor setups * Backed by manufacturer warranty for peace of mind and dependability

Not Yet Reviewed

$395.06

Brothers Trucks Complete Gauge Assemblies

Replace the old worn out, broken gauges in your truck with one of these complete gauge assemblies from Brothers Trucks. The complete assemblies offer a convenient, all-in-one restoration solution for various classic year Chevy/GMC trucks. Each assembly is tailored to exact specifications for your Chevy/GMC truck, ensuring a seamless fit into the original dash without modification. These pre-assembled, direct-fit units include new gauges, housings, lenses, and circuit boards, saving time on sourcing individual components. Order the assembly designed for your year, make and model.

Not Yet Reviewed

$819.95

—

$870.95

New Vintage USA 1973-87 GM Truck Gauge Packages

Build your classic with hand assembled New Vintage USA 1973-87 GM truck gauge packages. They are designed to install in the factory location while updating the style and function of your project's dash. Your build will receive the perfect fit with NVU's CNC laser-cut and formed mounting brackets plus, there are several styles to choose from. Their Woodward, 1940 or 67 Series offers a retro look or choose their Performance Series for a feel that is updated and modern without having the appearance of a race set. The gauges in these NVU direct-fit packages are designed with Phoenix Direct Drive technology that takes the instruments to a new level and provides more features. Bolt them on, wire them up, and off you go in great style with New Vintage USA 1973-87 GM truck gauge packages. Added notes: * Phoenix programmable speedometers and tachometers offer an unsurpassed amount of functions, tech, and style with an optimal amount of information displayed on high-tech mini OLED screens that are the same size as traditional odometer windows. * Direct Drive systems provide a better, easier way to wire multiple gauges, making your installation faster and trouble-free. You will no longer need to spend hours wiring up individual connections for each gauge. With NVU Direct Drive, installing your gauge package will be as simple as plugging into a port on the back of the driver gauge.

3.89 out of 5 stars ( 18 )

$861.86

—

$899.99

Classic Instruments Tach-Force Package Gauge Sets

Your Task-Force Chevy deserves Tach-Force Package gauge sets from Classic Instruments. American-made quality and modern technology create an old look with new appeal for your 1955-59 Chevrolet Task-Force pickups, Suburbans, and panel trucks. Classic Tach-Force Package retrofit units have all that you expect--a 140 mph speedometer, a 0-30 ohm stock fuel gauge, turn signal and high-beam indicators, and oil, volt, and temperature gauges. Plus, Classic added a tachometer and LED lighting! These gauge clusters also feature a dual-layer design, 12 V electronic movements, and push-button calibration that's available in four colors. They come fully assembled and include all of the appropriate sending units. Give your Task-Force modern precision and authentic looks with the perfect touch from Classic Instruments--Tach-Force Package gauge sets.

5.0 out of 5 stars ( 1 )

$1,075.95

Ford Performance Parts 8.8 in. IRS Loaded Differential Housings

Ford Performance Parts 8.8 in. IRS loaded differential housings are improvements to the rear axle of your Mustang. Whether you're replacing the original in your manual or strengthening the cast aluminum model in your automatic, there's nothing better than Ford Performance differential housings to do the job perfectly. Besides, who knows your Mustang better than the maker? These 8.8 in. IRS housings are fully loaded with forged, and CNC-cut gear sets installed. They feature strong cast iron topped with an aluminum differential cover, and, depending on the application chosen, a Torsen or Traction-Lok differential is included. If your automatic sees a lot of track time or your manual has a broken housing, your only choice should be genuine Ford Performance 8.8 in. IRS loaded differential housings.

3.0 out of 5 stars ( 3 )

$1,189.99

Classic Instruments All-American Nickel Series Gauge Sets

Classic Instruments All-American Nickel Series gauge sets bring your hot rod from the past into the present, beautifully! These Classic pre-packaged gauges offer American-made innovation and elegant styling with a blend of calm color, curved glass, polished high-step bezels, and slim red pointers that make this series truly timeless. The dramatic dimensional look of their instrumentation is surpassed only by their precision. Classic Instruments hand-assembles, inspects, re-inspects, calibrates, and tests every gauge before packaging and shipping them to ensure the perfection you're expecting. Sets are available in many gauge combinations and sizes. Complement your classic vehicle with the fine details of All-American Nickel Series gauge sets.

4.0 out of 5 stars ( 2 )

$767.95

American Autowire Factory-Fit Wiring Harnesses

American Autowire Factory-Fit wiring harnesses are OE replacements and are manufactured according to the original General Motors specifications. Each part number is fully assembled, taped, and ready to install upon arrival. They are best suited for a restoration project with minimal to no modification from the factory specification. American Autowire Factory-Fit harnesses are offered for individual dash, engine, forward lamp, console, rear body, and more, but the best thing is you can purchase a wiring harness as you need it or can afford it, making them great for those on a budget. Plus, since they are OEM-styled the fit is perfect and the installation time is less.

4.48 out of 5 stars ( 29 )

$24.70

—

$27.55

Classic Instruments SG Series Gauge Sets

Go gray and go bold with Classic Instruments SG Series gauge sets. Classic SG Series gauges sport a popular gray face and white pointer design for a clean graphic layout that's sure to make a statement on any dash. These hand-assembled, inspected, tested, and re-inspected gauges are available in numerous combinations to suit your application, including sets with Classic Dual and Quad gauges. Classic Instruments SG Series gauge sets are simply gray and simply perfect.

Not Yet Reviewed

$716.95

Classic Instruments Auto Cross Gray Series Gauge Sets

Classic Instruments Auto Cross Gray Series gauge sets feature matte black, low step bezels with flat glass and pool cue pointers. The design features clear, concise numerals and indices that are easy to read at any speed, with a gray outer accent stripe. Classic Instruments hand-assembles, inspects, re-inspects, calibrates, and tests every gauge before packaging and shipping them to ensure the perfection you're expecting. Auto Cross Gray Series is offered in 2-, 3-, 5-, and 6-gauge sets, with the 6-gauge available with Classic's performance-style bezels in aluminum or matte black. Auto Cross Series gauge sets: * 2-gauge sets include 3 3/8 in. or 4 5/8 in. speedometer or Speedtachular and Quad with fuel level, oil pressure, water temperature, and voltmeter * 3-gauge sets include 3 3/8 in. or 4 5/8 in. speedometer, tachometer, and Quad with fuel level, oil pressure, water temperature, and voltmeter * 5-gauge sets include 3 3/8 in. or 4 5/8 in. speedometer or Speedtachular with 2 1/8 in. or 2 5/8 in. short or full sweep fuel, temperature, pressure, volt gauges * 6-gauge sets include 3 3/8 in. or 4 5/8 in. speedometer and tachometer with 2 1/8 in. or 2 5/8 in. short or full sweep fuel, temperature, pressure, volt gauges

Not Yet Reviewed

$1,177.95

Manufacturer Rebate

AutoMeter American Muscle Instrument Clusters

Replace your factory gauges with one of AutoMeter's Amercian Muscle instrument clusters. These analog gauges feature advanced hybrid dial technology. They combine AutoMeter's signature white high-definition LED illumination and glowing red pointers for maximum readability. Each gauge has an authentic spun aluminum dial featuring embossed details and chrome bezels for a unique, classic look. The gauges come pre-assembled in factory black with chrome bezels. Best of all, the clusters plug directly into factory instrument boards without modification. They're available in a variety of sizes and layouts for specific vehicle applications.

4.43 out of 5 stars ( 7 )

$1,180.99

—

$1,301.99

Manufacturer Rebate

AutoMeter Antique Beige Analog Gauge Kits

These AutoMeter Antique Beige street rod gauges feature a timely, nostalgic look with the accuracy of a modern air core meter. Their beige-colored face is accented by a chrome bezel and a clear domed lens, capturing the essence of the automobiles of the past. The hollowed-out end of their antique-style pointer has a diamond shape that matches the major division increments.

4.61 out of 5 stars ( 23 )

$487.99

New Vintage USA 1967-68 Mustang Gauge Packages

New Vintage USA 1967-68 Mustang gauge packages offer the dash you want, the looks you want, and the quality and functions you need! Direct from Detroit, USA, these great gauge clusters from New Vintage complete the interior of your late 1960s Mustang muscle with their 60s inspired 67 Series or their hot rod 1940 Series. Or, go modern with their Performance line for a Pro-Touring feel--it's your choice. Clusters have a precision laser-cut and formed back panel to ensure the perfect alignment of the gauge to the panel. Kits are available in basic gauge and mounting bracket packages to install in your stock panel, or choose fully assembled packages. The gauges in these NVU direct-fit packages are designed with Phoenix Direct Drive technology that takes the instruments to a new level and provides more features. It's your project, your way, with New Vintage USA 1967-68 Mustang gauge packages. More about the exclusive Phoenix technology: * Phoenix programmable speedometers and tachometers offer an unsurpassed amount of functions, tech, and style with an optimal amount of information displayed on high-tech mini OLED screens that are the same size as traditional odometer windows. * Direct Drive systems provide a better, easier way to wire multiple gauges, making your installation faster and trouble-free. You will no longer need to spend hours wiring up individual connections for each gauge. With NVU Direct Drive, installing your gauge package will be as simple as plugging into a port on the back of the driver gauge.

2.0 out of 5 stars ( 2 )

$849.99

—

$1,479.99

FiTech Ultimate LS EFI 500 HP Fuel Injection Systems with Go Fuel In-Tank Module

FiTech Ultimate LS EFI 500 hp fuel injection systems with Go Fuel in-tank module combines incredible engineering and construction for top-of-the-line performance. FiTech fabricated many billet aluminum parts for their Ultimate LS EFI 500 hp systems, including a 92mm throttle body, high-volume fuel rails, and a 1,500 to 6,500 rpm powerband intake manifold. They combine sequential spark and fuel control with 36 lbs./hr. injectors, a plug-and-play wiring harness, and a color touch screen self-learning ECU. This allows for programing two fan control outputs, most tach and speedometer output drivers, and target AFR and timing on the fly. The Go Fuel in-tank module universal billet assembly can be used on tanks with a depth of 6 to 15 inches. The billet aluminum was designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly. The vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. Whether you're starting with a 5.3 junkyard dog or a crate motor, FiTech Ultimate LS EFI 500 hp systems with Go Fuel in-tank module will look and run exceptionally. Additional Ultimate LS features: * Optional GM transmission control feature is suitable for 4L60, 4L65, 4L70, or 4L80 * Black anodized aluminum parts for style and corrosion resistance * High-flow, cable-operated throttle body * Bosch wideband-controlled * Stainless oxygen sensor bung * Compatible with car and truck coils * AN fittings and fuel crossover * Works with custom cams * Designed for applications making at least 6 in. of vacuum at idle * 24X and 58X crank and cam compatible * Programmable touch screen hand-held controller with data log features * Suction cup mounting bracket

5.0 out of 5 stars ( 1 )

$2,089.99

—

$2,726.99

On Sale

Summit Racing™ Direct-Fit Restoration Instrument Gauge Panel Assemblies

Bring your dash "up to speed" with Summit Racing™ Direct-Fit Restoration instrument gauge panel assemblies. Constructed of high-quality components to ensure performance and dependability, they will help you to keep an accurate eye on your car's vitals while providing a fresh appearance. If you're looking to finish your project car and need new instrument gauges, our Summit Racing™ instrument gauge panel assemblies will provide the fit, function, and style, along with the value you desire for a successful build.

5.0 out of 5 stars ( 2 )

$741.99

$549.89

—

$744.99

Classic Instruments 1966-77 Ford Bronco Package Gauge Sets

Classic Instruments 1966-77 Ford Bronco Package gauge sets keep the factory-original design while bringing modern gauge instrumentation to your dashboard. The Bronco's signature all-in-one speedometer and gauge package adds a tachometer that looks like it was straight from the factory. Ditch the worn out or broken gauges in your 1966-1977 Bronco and upgrade to this Classic Instruments 6-gauge assembly that is sure to be a unique improvement to your classic Bronco's interior. Key features include: * Six readings in one gauge * Different gauge face color options available * Direct OE fitment * Classic Instrument's ZST built-in the speedometer with push-button calibration * Warm white LED back lights with dimmers (Cool white also available) * LED turn signal indicators * Built-In ECM signal filter * All required senders are included * Low-step bezel (several color options are available) * Includes mounting hardware

Not Yet Reviewed

$1,126.95

Manufacturer Rebate

AutoMeter Replacement Bulb and Sockets

AutoMeter offers replacement bulb and socket assemblies, as well as individual replacement bulbs, designed for 1 1/2 in. mini, 2 1/16 in., and 2 5/8 in. gauges. They're available in a variety of colors, and can also be used in some speedometers and tachometers. Order the light bulb number recommended for your application.

4.23 out of 5 stars ( 62 )

$5.99

—

$18.99

New Vintage USA 1967-72 GM Truck Gauge Packages

New Vintage 1967-72 Chevy/GMC truck gauge packages offer original style and reliable instrumentation direct from Detroit, USA! The gauges in these NVU direct-fit packages are designed with Phoenix Direct Drive technology that takes the instruments to a new level and provides more features. Plus, they include a T-case, auxiliary lamps, turn signals, high-beam, and exclusive indicator gauge with warning lamps. Choose either their basic kit or their complete kit that comes fully assembled. With the direct fit and authentic looks you want, and the precision you need, New Vintage 1967-72 Chevy/GMC truck gauge packages are the right choice for your project. More about the exclusive Phoenix technology: * Phoenix programmable speedometers and tachometers offer an unsurpassed amount of functions, tech, and style with an optimal amount of information displayed on high-tech mini OLED screens that are the same size as traditional odometer windows. * Direct Drive systems provide a better, easier way to wire multiple gauges, making your installation faster and trouble-free. You will no longer need to spend hours wiring up individual connections for each gauge. With NVU Direct Drive, installing your gauge package will be as simple as plugging into a port on the back of the driver gauge.

4.23 out of 5 stars ( 13 )

$899.99

FiTech Ultimate LS EFI 750 HP Fuel Injection Systems with Go Fuel In-Tank Module

FiTech Ultimate LS EFI 750 hp fuel injection systems with Go Fuel in-tank module combines incredible engineering and construction for top-of-the-line performance. FiTech fabricated many billet aluminum parts for their Ultimate LS EFI 750 hp systems, including a 102mm throttle body, high-volume fuel rails, and a 1,500 to 6,500 rpm powerband intake manifold. They combine sequential spark and fuel control with 55 lbs./hr. injectors, a plug-and-play wiring harness, and a color touch screen self-learning ECU. This allows for programing two fan control outputs, most tach and speedometer output drivers, and target AFR and timing on the fly. The Go Fuel in-tank module universal billet assembly can be used on tanks with a depth of 6 to 15 inches. The billet aluminum was designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly. The vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. Additional Ultimate LS features: * Optional GM transmission control feature is suitable for 4L60, 4L65, 4L70, or 4L80 * Black anodized aluminum parts for style and corrosion resistance * High-flow, cable-operated throttle body * Bosch wideband-controlled * Stainless oxygen sensor bung * Compatible with car and truck coils * AN fittings and fuel crossover * Works with custom cams * Designed for applications making at least 6 in. of vacuum at idle * 24X and 58X crank and cam compatible * Programmable touch screen hand-held controller with data log features * Suction cup mounting bracket

5.0 out of 5 stars ( 1 )

$2,375.99

—

$3,013.99

Classic Instruments SG Series Gauges

Go gray and go bold with Classic Instruments SG Series gauges. Made in America, the Classic SG Series sports a popular gray face and white pointer design for a clean graphic layout that's sure to make a statement on any dash! These hand-assembled, inspected, tested, and re-inspected gauges are available individually for fuel, water temperature, oil pressure, volts, speedometer, and tachometer readings, as well as Classic's Dual and Quad gauges. Classic Instruments SG Series gauges are simply gray and simply perfect.

Not Yet Reviewed

$97.05

47 Results Found For "Speedometer assemblies"