55 Results Found For "LS3 Push Rods"

Summit Racing™ HDR Thickwall Chromoly Pushrods

Summit Racing™ HDR premium thick-wall pushrods are a great upgrade for your engine. Factory pushrods (and even .080 wall aftermarket versions) act like a pogo stick in a running engine. Not only is static spring pressure working against them, it's also the valvetrain inertial mass increasing with RPM. This reduces power and valvetrain life. While a .080 thin-wall pushrod may not break, it doesn't mean it's the best option. Enter the HDR's. Summit™ used FEA (Finite Element Analysis) in the initial testing. We didn't just compare them to thin-wall welded-ball factory pushrods, but with aftermarket models, as well. The results speak for themselves! * The Summit™ HDR 5/16 x .105 wall pushrods have 20 percent less stress and 25 percent less deflection than a typical 5/16 x .080 chromoly pushrod * The Summit™ HDR Pro LS 11/32 x .120 wall have 25 percent less stress and 28 percent less deflection than a typical 5/16 x .080 wall chromoly pushrod * The Summit™ HDR 3/8 x .135 pushrods commonly used in big blocks has 15 percent less stress and 20 percent less deflection than a typical 3/8 x .080 wall chromoly pushrod Summit Racing™ added other high-end features like 210 degree ball ends to cope with extreme lobe lift and clear the rocker and are available in multiple lengths. * HDR 5/16 pushrods are offered in common LS, SBC, and SBF lengths * HDR Pro LS 11/32 pushrods add .030 diameter AND .120 wall thickness over a 5/16. Although most LS engines came with 5/16 pushrods, 11/32 pushrods fit any stock or aftermarket cylinder head. The added thickness adds much needed strength to any LS cam swap or engine build. Being available in .025 in. increments allows for fine tuning of hydraulic lifter preload with the LS's non-adjustable rockers. * HDR 3/8 pushrods fit the LS7 and common BB Chevy combinations. They have .135 wall thickness for maximum strength. Pushrods are some of the best horsepower-per-dollar components in your engine, so step up to the HDR's for your build!

4.86 out of 5 stars ( 59 )

Melling Pushrods

Melling OEM replacement pushrods are perfect for stock rebuild or mild performance applications where open spring pressures do not exceed 300 lbs. They're manufactured from steel tubing and work well with factory or aftermarket rocker arms. These units are available in a wide range of lengths and other options for fitment on countless makes and models. When you're replacing your valvetrain components, trust Melling pushrods to keep your engine running smoothly.

4.56 out of 5 stars ( 81 )

Mast Motorsports Black Label Pushrods

Mast Motorsports Black Label pushrods bring your high-quality, hardened, one-piece chromoly rods featuring a 3/8 in. diameter available in several lengths. Choose the set preferred for your project.

Not Yet Reviewed

Mast Motorsports LS Pushrods

Mast Motorsports LS pushrods are hardened, one-piece chromoly rods featuring a 5/16 in. diameter, .080 in. thick walls, and available in different lengths. Mast recommends these pushrods for engines running GM cylinder heads and hydraulic lifters. They work with Factory LS7 cylinder heads with hydraulic lifters and Factory rocker arms. Choose the set designed to fit your project.

Not Yet Reviewed

Chevrolet Performance Pushrods

Chevrolet Performance offers a complete line of heavy-duty pushrods for most GM engines. They're designed to deliver in high performance street and competition applications. Made of high-quality materials, these pushrods are available in a variety of sizes and style options to suit your needs.

3.33 out of 5 stars ( 3 )

ACDelco GM Genuine Parts Brake Pedal Push Rod Retainers

GM Genuine Parts brake pedal push rod retainers are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Select the correct ones to fit your vehicle.

4.0 out of 5 stars ( 2 )

COMP Cams XD-A Pushrod Shims

COMP designed their XD-A adjustable pushrods with a top section that slides 2 in. inside a wider bottom section, with one or two shims captured in-between. These COMP Cams XD-A pushrod shims allow the pushrods to be adjusted over a range of 0.172 in. in 0.004 in. increments. Order the shim thickness and quantity needed.

Not Yet Reviewed

ATK High Performance LS3/L92 255cc Aluminum Cylinder Heads

ATK high performance LS3/L92 25cc as cast aluminum cylinder heads are the perfect budget option for your next LS build. These fully assembled heads are capable of making over 600 hp naturally aspirated out of the box and will come loaded with upgraded components. The springs are set up to be used on up to .650 in. lift camshafts. No reason to swap parts on your new heads when running an upgraded cam! -- Features and benefits: * Bronze valve guides * Dual valve springs for .650 in. max lift * CNC-finished faces and bolt holes for extreme accuracy * 355-T6 high density aluminum * Machined for screw in studs and guide plates * All factory components will fit without modification -- Cylinder Head Specifications INTAKE: * Intake Runner Volume (cc): 252 * Intake Port Location: Standard * Intake Valves Included: Yes * Intake Valve Diameter (in): 2.160 in. EXHAUST: * Runner Volume (cc): 78.8 * Exhaust Valve Diameter (in): 1.600 in. * Exhaust Valves Included: Yes * Exhaust Runner: No * Port Shape: Round * Exhaust Port Location: Standard COMBUSTION CHAMBER: * Combustion Chamber Volume (cc): 69.4 * CNC-Machined Combustion Chamber: No VALVE SPECS: * Intake Valve Angle: 12 degrees (3 degrees rolled) * Exhaust Valve Angle: 12 degrees (3 degrees rolled) * Valve Guides Included: Yes * Valve Guide Material: Manganese Bronze * Valve Seats Machined: Yes * Valve Seat Machine Style: 5-Angle * Valve Seat Material: Chrome Nickle * Valve Stem Seals Included: Yes * Valve Stem Seal Style: Viton® Fluoroelastomer SPRINGS: * Valve Springs Included: Yes * Maximum Valve Lift (in): .650 in. * Spring Pressure Open: 370 @ 1.150 * Spring Pressure Closed: 142 @ 1.800 * Outside Diameter of Outer Spring (in): 1.29 in. * Damper Spring Included: Yes * Number of Springs per Valve: Dual * Retainers Included: Yes * Retainer Material: Chromoly Steel * Locks Included: Yes * Lock Style: 7 Degree ROCKER ARMS: * Rocker Arm Studs Included: No * Rocker Arms Included: N/A * Rocker Arm Nut Thread Size (in): 8 x 1.25 * Rocker Arm Nuts Included: No MISC: * Head Style: Assembled * Cylinder Head Material: Aluminum * Cylinder Head Finish: Natural * Spark Plug Style: Standard * Cover Mounting Style: Standard * Steam Holes Drilled: No * Oiling Style: Through Pushrod * Machined for O-Ring: No * Heat Crossover: No * 10mm Accessory Bolt Holes Machined On Ends of Heads

Not Yet Reviewed

ACDelco GM Genuine Parts Clips and Multi-Purpose Retainers

ACDelco GM Genuine Parts clips and multi-purpose retainers are manufactured to be an exact replacement for your vehicle. These fasteners are GM original equipment replacements, meaning you can rest assured of premium quality, as well as peace of mind that the fit, form, and function meet their high standards and yours.

5.0 out of 5 stars ( 4 )

FAST Rectangular Port Supercharger/Camshaft Power Packages for GM LS3

FAST Rectangular Port Supercharger/Camshaft Power Packages for GM LS3 provide the perfect paring of products for enthusiasts looking for 850+ hp potential from their GM LS3 engine. They feature Edelbrock's 2300 TVS supercharger with integrated intercooler and COMP Cams' LST camshaft designed for supercharger applications. These FAST Power Packages for GM LS3 have all the basics required to install the supercharger, but necessary accessories such as fuel injectors, air intake, and heat exchanger pump are left up to the installer, providing total flexibility for custom installations. FAST Edelbrock/COMP Cams Power Packages for GM LS include: * 2300 TVS supercharger—integrated high-capacity, dual bar and plate intercooler enables major power gains through lower inlet air charge temperatures * Supercharger pulleys: -- 3.500 in. is pump gas-friendly supercharger pulley for engine break-in, initial tuning, and general performance driving -- 2.750 in. when maximum power is desired on race fuel or E85 * Accessory drive pulleys * Fuel lines and rails * Low Shock Technology camshaft * Pushrods * Dual valve springs * Tool steel retainers * Valve locks and seals * Spring seats * Installation hardware

Not Yet Reviewed

Edelbrock Total Power Package Performer RPM LS3 Top-End Engine Kits

Edelbrock Performer RPM LS3 Top-End kits deliver improved performance in 1,500 to 6,500 rpm street application range. To get great performance out of any engine, all of the components must work together, and for over 30 years, Edelbrock Total Power Packages have solved the parts-matching puzzle. Now, their dyno-matched component Power Package Top-End kits, will get you the best Edelbrock performance in-one-box, under one part number, with "no guesswork" involved. And all of the performance marks are real results from engine dynamometer tests on factory short blocks. Edelbrock Performer RPM LS3 Top-End kits feature: * Performer RPM intake manifold * E-CNC cylinder heads * Pushrods * Rollin' Thunder hydraulic roller camshafts * Complete bolt kits * Edelbrock gasket set * MSD ignition control module Installation notes: * Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage. * Use RTV sealant to properly seal end seals--DO NOT USE end seals gaskets * Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage * NPT/pipe thread fittings require the use of PTFE tape or paste on threads to ensure proper seal * DO NOT overtighten NPT/pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/pipe thread is a tapered thread.

Not Yet Reviewed

Trick Flow® GenX® 280 Cylinder Heads for GM LS3

Not Yet Reviewed

Trick Flow® GenX® 255 Cylinder Heads for GM LS3

Trick Flow engineers used the best features of OEM GM LS3 and LS7 cylinder heads, combined with their own race-winning engineering and technology, to create the GenX® 255—the ultimate ultimate square port LS cylinder head for 4.000" and larger bore engines. The heads feature fully CNC Competition Ported runners with a premium high resolution surface finish for maximum airflow and performance potential. Stock LS3 ports accommodate LS3-style intake manifolds and LS9/LSA blower assemblies. The valve angles have been changed from 15° to 12° to increase piston-to-valve clearance and allow the use of larger camshafts. The coolant holes through the head deck were redesigned to work with all LS head gasket and engine block combinations. GenX 255 heads are available with standard or 6-bolt per cylinder mounting patterns. Trick Flow GenX 255 cylinder heads are emissions-legal under CARB E.O. #D-747 for 2007-present GM vehicles with 6.2L engines. They are available fully assembled or as bare castings. Sold individually.

4.0 out of 5 stars ( 7 )

Chevrolet Performance LS3 Cylinder Heads

Fit any LS engine with Chevrolet Performance LS3 cylinder heads. Manufactured from aluminum alloy, these GM stock replacement heads are assembled with intake and exhaust valves, stem seals, retainers, springs, and locks. Great cylinder head airflow has always supplied the LS Series with exceptional performance. Retain that performance and save yourself time and worry by replacing your tired cylinder heads with Chevrolet Performance LS3 cylinder heads.

5.0 out of 5 stars ( 3 )

AFR 260cc LS3 Mongoose Cylinder Heads

AFR 260cc LS3 Mongoose cylinder heads are 100 percent 5-axis, CNC-ported, and feature titanium retainers, A356 aluminum castings, and Pac Racing springs. These CARB certified heads require 4.000 in. or larger bore applications on up through 454 cu. in. engines operating at or below 7,000 rpm—and flow over 380 cfm at 0.700 in. lift and are designed primarily for street and strip applications. Other structural features include Air Flow Research's trademark 3/4 in. thick head deck, reinforced rocker stud bosses, and thick wall runners provide unparalleled durability. Use of AFR stud girdles and full roller rocker arms are required. When it comes to building power, start with these AFR 260cc LS3 Mongoose cylinder heads.

5.0 out of 5 stars ( 5 )

AFR 238cc LS3 Enforcer Cylinder Heads

AFR's 238 LS3 Enforcer cylinder heads feature its Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners, and combustion chambers that allow for extremely accurate and repeatable port location/performance. They are the first Enforcer castings with 100 percent AFR design. With a smaller valve and port, these heads outflow your OE LS3 casting by up to 20 cfm at low lifts, offering greater performance potential. The budget-friendly heads are perfect for your OEM engine operating below 6300 rpm. They come fully assembled with the identical components found in AFR's higher end CNC-ported cylinder heads—such as PAC Racing springs, Viton® valve seals, machined bead valve locks (not stamped), hardened spring seats, and one-piece 8mm 21-4N/21-8N stainless steel valves. They're available without any parts for DIY gearheads. Sold as a single piece; two are required per engine.

Not Yet Reviewed

Trick Flow® GenX® Top-End Engine Kits for GM LS

Are you still confused as to which parts you need to get the performance you want? Quit wasting time and second-guessing yourself. Trick Flow® has already done the work for you with GenX® Top-End Engine kits for GM LS. Designed and dyno-tested to deliver the performance you crave for less than purchasing the parts separately, these kits save time and money! What's in these GenX® Top-End Engine kits? * A pair of Trick Flow® GenX® street/strip cylinder heads * A specially matched hydraulic roller cam * Some kits contain roller rocker arms * Pushrods * Head gaskets * Head bolts * Exhaust gaskets * Balancer bolt

3.75 out of 5 stars ( 4 )

ATK High Performance 260cc CNC Ported LS3 Aluminum Cylinder Heads

ATK offers select parts for your build, including cylinder heads. They use them in their engine combinations and are available to complete your LS engine or upgrade existing components. ATK High Performance 260cc LS3 CNC-ported cylinder head features: * A356 aluminum construction * Stainless steel intake and exhaust valves * Manganese Bronze valve guides * Viton® valve seal * Powder meatal valve seats * Titanium retainers * Spark plug dimensions: 14mm x .708 in. with tapered seat

Not Yet Reviewed

FLOTEK 276cc LS3 Cylinder Heads

FLOTEK 276cc LS3 cylinder heads feature as-cast high-flow intake runners that flow significantly better than the stock LS3 heads. The ports are in the stock location, so no special valvetrain parts or rocker arms are required. These heads are 15 degree, which is the same as the stock cylinder heads—no special pistons are required. They will work on any LS block that has a 4 in. bore or larger. FLOTEK 276cc LS3 cylinder heads combine high performance and high quality at a value price. Select from bare or assembled models.

3.0 out of 5 stars ( 2 )

Howards Cams LS Series Direct Bolt-On Roller Rockers

Add some punch to your Chevy LS with these Howards Cams LS Series direct bolt-on roller rockers. These roller rockers are easy replacements for your stock LS rockers and feature plenty of advancements that help you make more power and get better throttle response. Howards designed these roller rockers to be direct bolt-on pieces, so there is no need to change pushrods, guideplates, rocker studs, or valve covers, and your engine bay can keep that sleeper, bone stock look. These rocker arms are constructed from aluminum and feature needle-bearing fulcrums and roller tips to decrease friction and increase performance. Howards Cams offers these LS Series bolt-on roller rockers in either stock ratio or a high-lift, 1.80 ratio, so you can choose which one best fits your goals.

4.67 out of 5 stars ( 3 )

ATK High Performance 270cc CNC Ported LS3 Aluminum Cylinder Heads

ATK offers select parts for your build, including cylinder heads. They use them in their engine combinations and are available to complete your LS engine or upgrade existing components. ATK High Performance 270cc LS3 CNC-ported cylinder head features: * A356 aluminum construction * Stainless steel intake and exhaust valves * Manganese Bronze valve guides * Viton® valve seal * Powder meatal valve seats * Titanium retainers * Spark plug dimensions: 14mm x .708 in. with tapered seat

Not Yet Reviewed

Trick Flow® GenX® 280 HD Cylinder Heads for GM LS3

Trick Flow® GenX® 280 HD cylinder heads offer an unbeatable combination of performance and durability, making them the perfect upgrade for your high-performance GM LS3 engine build. Assembled with Manley Severe Duty stainless steel valves, these heavy-duty versions of the standard GenX® 280 heads can withstand the added heat, stress, and abuse dealt by big power adders. That makes them the ideal choice for engines using superchargers, turbochargers, or nitrous. GenX 280 HD cylinder heads have fully CNC-profiled combustion chambers and CNC Competition Ported square port runners with a premium high resolution surface finish that guarantees dimensional accuracy and balanced flow from port-to-port for maximum power potential. The valve angles have been modified from the stock 15° to 12° to increase piston-to-valve clearance and allow the use of larger camshafts. The coolant holes through the head decks were designed to ensure compatibility with all LS head gasket and engine block combinations. The 6-bolt-per-cylinder mounting pattern for GMPP LSX and other aftermarket blocks increases clamping force to prevent head gasket failure, cylinder distortion, and other issues that plague the factory 4-bolt design. Trick Flow® GenX® 280 HD heads have LS3 port locations to work with all LS3-style intake manifolds and LS9/LSA blower assemblies. They must be used on engines with 4.000" or larger bores. Cylinder heads are available fully assembled or as bare castings. Sold individually.

Not Yet Reviewed

Trick Flow® GenX® 255 HD Cylinder Heads for GM LS3

Trick Flow® GenX® 255 HD cylinder heads offer an unbeatable combination of performance and durability, making them the perfect upgrade for your high-performance GM LS3 engine build. Assembled with Manley Severe Duty stainless steel valves, these heavy-duty versions of the standard GenX® 255 heads can withstand the added heat, stress, and abuse dealt by big power adders. That makes them the ideal choice for engines using superchargers, turbochargers, or nitrous. GenX 255 HD cylinder heads have fully CNC-profiled combustion chambers and CNC Competition Ported square port runners with a premium high resolution surface finish that guarantees dimensional accuracy and balanced flow from port-to-port for maximum power potential. The valve angles have been modified from the stock 15° to 12° to increase piston-to-valve clearance and allow the use of larger camshafts. The coolant holes through the head decks were designed to ensure compatibility with all LS head gasket and engine block combinations. The 6-bolt-per-cylinder mounting pattern for GMPP LSX and other aftermarket blocks increases clamping force to prevent head gasket failure, cylinder distortion, and other issues that plague the factory 4-bolt design. Trick Flow® GenX® 255 HD heads have LS3 port locations to work with all LS3-style intake manifolds and LS9/LSA blower assemblies. They must be used on engines with 4.000" or larger bores. Cylinder heads are available fully assembled or as bare castings. Sold individually.

Not Yet Reviewed

Edelbrock Victor 11-Degree CNC LS3 6-Bolt Cylinder Heads

Edelbrock Victor CNC 11-degree 6-bolt LS3 cylinder heads are specifically designed for high-horsepower, naturally aspirated, and boosted applications. Utilizing the popular LS 6-bolt design, they are compatible with the GM LSX block and all aftermarket iron or aluminum 6-bolt per cylinder LS race blocks. The design offers increased clamping capacity over the standard factory 4-bolt configuration and greatly improves head gasket sealing, making them ideal for high-compression naturally aspirated engines and high-boost applications. Edelbrock Victor CNC heads are manufactured with premium materials and machined to the industry's tightest tolerances. They have an 11-degree valve angle, copper infiltrated powder metal valve seats, and fully CNC-machined ports for maximum airflow. The machined runners and chambers, along with the valve angle increase overall flow capability, while the revised water jacket design enhances thermal conductivity and tunability. Premium manganese bronze valve guides withstand long wear with emphasis placed on holding precision tolerances on valve seat concentricity, allowing the valves to seal securely, eliminating leak down and increasing cylinder pressure during engine operation. Finally, the .700 in. thick deck and reinforced rocker rails make these cylinder heads ideal for high-horsepower applications.

Not Yet Reviewed