Filters
Plumb all four corners of your heads with Trick Flow® engine steam line plumbing kits for GM LS. It's an easy upgrade from factory steam tubes with Trick Flow®. Your 4-corner plumbing kits include: * Two 2 ft. 1/4 in. black rubber hoses * Twelve 9/16 in. hose clamps * Four 4 AN 90 degree fittings * Stainless steel tee barb fitting * Stainless steel cross barb fitting
( 4 )
$62.99
Earl's Performance LS steam vent kits eliminate trapped air and steam from your engine to prevent hot spots and overheating. They offer a selection of these LS power plumbing kits, with the appropriate braided stainless steel Speed Flex hose with hose ends that make installation easier and much more attractive than OEM hard lines. Plus, they provide more flexibility when you're using aftermarket intakes and other accessories on performance vehicles. The kits are available in front and 4-corner plumbing options, with adjustable anodized aluminum steam vent adapters and/or distribution blocks. Plumb your LS for performance with Earl's steam vent kits.
( 11 )
$166.95
—
$310.95
Your modified LS-powered cars and trucks will be easier to service with an upgrade to a race car plumbing system. These plumbing kits contain black anodized billet aluminum fittings, O-rings, stainless steel bolts, and all of the necessary hose to plumb just the front of the heads or all four corners. Choose the most desirable upgrade to your factory steam tubes--Trick Flow® engine steam line plumbing kits for GM LS.
( 75 )
$101.99
—
$148.95
Holley LS steam vent kits prevent hot spots or overheating. Designed to eliminate trapped air and steam from your engine, these complete kits are available to plumb your engine and include the appropriate hose and hose ends to make installation a breeze. They are more attractive than the OEM lines and offer increased flexibility when using aftermarket intakes and other accessories on your performance vehicle. Holley LS steam vent kits may feature: * Adjustable pivoting steam vent adapters * Black push-on or stainless braided Speed-Flex hose and hose ends * Available in front or 4-corner plumbing options
( 11 )
$54.29
—
$166.95
When upgrading your LS-powered vehicle, don't forget to replace the factory steam tubes. Our Summit Racing™ Pro LS steam line plumbing kits eradicate trapped air and steam pockets from your engine to prevent hot spotting and overheating as well as provide more flexibility when using aftermarket intakes. Kits vent all 4-corners (except SUM-220952 and SUM-220952B kits) and contain black anodized billet aluminum fittings, steam port adapter, O-rings, stainless steel bolts, -3AN or -4AN hose and hose ends, (stainless steel hard lines and 5-port distribution block on SUM-220959 kit only) to make installation easy and more attractive than OEM lines, offering a cleaner look and better waterflow.
( 15 )
$74.99
—
$144.99
Plumb just the front of your heads with Trick Flow® engine steam line plumbing kits for GM LS. It's an easy upgrade from factory steam tubes. Your engine front-only plumbing kits include: * 2 ft. 1/4 in. black rubber hose * Six 1/4 in. hose clamps * Two 4 AN 90 degree fittings * Stainless steel tee barb fitting
Not Yet Reviewed
$42.79
PWR North America steam vent kits for the GM LS engines are designed to be plumbed to the suction side of the water pump or to the radiator. They can be used with a carburetor or with OEM or aftermarket fuel injection. The kits include black -4 AN push-lock fittings, braided black cloth hose, along with stainless steel hardware, so you can custom-tailor them to your specific needs without the use of special tools. Make a smart investment! Choose these PWR steam vent kits for your GM LS engine. They provide a clean, professional look, while providing proper air bleeding for the cooling system.
( 2 )
$155.00
Today, life is a bit easier! Trick Flow® engine steam line fittings for GM LS are available to upgrade the factory steam tubes of your modified LS-powered cars and trucks to update your race car plumbing system. The fittings are black anodized billet aluminum and attach to the corners of your GM LS cylinder heads. They feature -4 AN male threads and include O-rings and stainless steel bolts. Upgrade to easy with Trick Flow® engine steam line fittings for GM LS.
( 13 )
$14.99
—
$18.99
Summit Racing™ offers engine steam line fittings for GM LS applications from 1997 and up. They're designed to upgrade the factory steam tubes of your modified LS-powered cars and trucks—updating your race car plumbing system. The fittings are black anodized billet aluminum and attach to the corners of your GM LS cylinder heads. They feature -4 AN male threads and include O-rings and stainless steel bolts. Order the style best suited for your vehicle.
( 3 )
$10.99
—
$12.99
Trick Flow® engine steam line hoses for GM LS service your steam tube system. Whether you're plumbing just the front of your heads or all four corners, these hose kits will replace your old with new performance. Choose Trick Flow® braided black nylon covered rubber hose or braided stainless steel covered rubber hose.
( 16 )
$40.79
—
$72.99
On Sale
The original GM brazed vent tube manifold does not take into consideration the aftermarket intakes and accessories we put on our performance vehicles. Replace the rigid hard lines with Earl's Performance LS steam vent adapters. These adjustable outlets are O-ring seal adapters designed to convert to -3 or -4 AN plumbing. Earl's steam tube adapters are the most adjustable and lowest profile available. These adapters look as nice as they are installation-friendly. There are several kits available to allow for the optimal routing on your application, including dual outlet options, which eliminate the need for a Tee adapter.
( 17 )
$76.45
$38.84
—
$71.69
RideTech 1973-79 Ford complete bolt-on coilover suspension systems deliver the best handling for your classic truck—in a package that you can install yourself with hand tools and a little elbow grease. 1965-1979 FRONT SUSPENSION: * Removes bulky, heavy, poor handling twin I-beam suspension * Bolt-in cradle strengthens the front of the truck while providing structural mounts for front control arms; utilizes substantial "H" style design compared to other "I" style crossmembers. * Superb suspension geometry, built without compromise, vastly superior to adapted salvage yard "Crown-Vic suspension swaps" or "street rod style" / Mustang II front systems with optimized roll centers and anti-dive. * Delrin© bushings on upper and lower control arms provide smooth, squeak-free long life * Upper control arm cross-shaft allows for easy alignment and use of caster slugs * Adjustable steering stop on lower control arm * Utilizes RideTech tall "pin" spindle, which uses "AFX brake kits." Many brake kits (including Wilwood) are dual drilled for 5 x 4.5 in. or 5 x 4.75. lug pattern * Optional "Hub" spindles offer the same geometry improvements as the pin spindles but add the performance and simplicity of late model Mustang hubs and brakes. Includes S550 2015-23 Mustang hubs for maximum strength, consistent braking and reduced maintenance. Compatible with 2015-23 Mustang brake systems, OE and aftermarket (caliper brackets included). Minimum 17 in. wheels. Hubs fit Ford car 5 x 4.5 in. lug pattern and include 14mm studs. * Brake kit for the stock 5 x 5.5″ lug pattern with Ridetech pin spindle are available as well * Increased camber gain with tall spindle, 5-8 degrees caster for improved high-speed stability * 63.5 in. in front width (wheel mount surface to wheel mount surface); provides options for "traditional" offset wheel choices (4 in. narrower than Crown Vic) * Fits 14 in. and larger wheels. If using more than 4.5 in. of backspacing, 18 in. wheels are required * Motor mount "loops" connect cradle to frame rails to reinforce frame * Motor mount options for Modular Ford, Ford FE, and Small Block Ford, Chevy LS / Small Block / Big Block * Front sway bar measures 1.5 in. x .250 wall and provides confident cornering and smooth ride * Adjustable bump stops * Rack and pinion steering conversion with 15.5 in. center to center bushing mounts for 1979-93 Mustang-style steering rack * Includes billet adjustable tie rods * Bump steer has been virtually eliminated * Adaptable to stock steering column using kit 12319505; includes column adapter, U-Joint and shaft. * High-quality satin black powdercoat finish * Entire system saves approximately 130 lbs. from the front of the truck Rear 4-LINK SUSPENSION: * Removes factory leaf spring suspension and bracketry * Complete parallel 4-link with panhard and C-notches * Works with coilover or Shockwave air suspension * Includes R-Joints on all links for smooth, bind-free, quiet operation and long life * Optimized roll center and anti-squat (60 percent anti-dive) for amazing traction and elimination of wheel hop * High-quality satin black powdercoat finish * Reduces rear weight by 50 lbs. * 1965-1972: No bed modification needed * 1973-1979: Slight bed support rail modification needed (not visible from the top side of the truck * Compatible with short bed and long bed trucks * Adjustable coilover suspension system
Not Yet Reviewed
$8,610.00
What are some of the virtues of a quality RideTech StreetGrip suspension system? For starters, they're easy to install. The Delrin bushings eliminate deflection, and dual-rate springs allow the vehicle to transition small road irregularities via a compliant spring rate. Adjustable monotube shocks deliver premium ride quality and handling performance, while the tall upper ball joints reposition the control arms to correct camber for more stability. Sway bar end links are also included to minimize body roll through corners. Give your vehicle the components it needs to handle the road with a StreetGrip suspension system—RideTech's one-box solution for better ride and control. Order the model designed for fitment on your vehicle.
( 1 )
$2,350.00
—
$2,460.00
RideTech 1965-72 Ford complete bolt-on coilover suspension systems deliver the best handling for your classic truck—in a package that you can install yourself with hand tools and a little elbow grease. 1965-1979 FRONT SUSPENSION: * Removes bulky, heavy, poor handling twin I-beam suspension * Bolt-in cradle strengthens the front of the truck while providing structural mounts for front control arms; utilizes substantial "H" style design compared to other "I" style crossmembers. * Superb suspension geometry, built without compromise, vastly superior to adapted salvage yard "Crown-Vic suspension swaps" or "street rod style" / Mustang II front systems with optimized roll centers and anti-dive. * Delrin© bushings on upper and lower control arms provide smooth, squeak-free long life * Upper control arm cross-shaft allows for easy alignment and use of caster slugs * Adjustable steering stop on lower control arm * Utilizes RideTech tall "pin" spindle, which uses "AFX brake kits." Many brake kits (including Wilwood) are dual drilled for 5 x 4.5 in. or 5 x 4.75. lug pattern * Optional "Hub" spindles offer the same geometry improvements as the pin spindles but add the performance and simplicity of late model Mustang hubs and brakes. Includes S550 2015-23 Mustang hubs for maximum strength, consistent braking and reduced maintenance. Compatible with 2015-23 Mustang brake systems, OE and aftermarket (caliper brackets included). Minimum 17 in. wheels. Hubs fit Ford car 5 x 4.5 in. lug pattern and include 14mm studs. * Brake kit for the stock 5 x 5.5″ lug pattern with Ridetech pin spindle are available as well * Increased camber gain with tall spindle, 5-8 degrees caster for improved high-speed stability * 63.5 in. in front width (wheel mount surface to wheel mount surface); provides options for "traditional" offset wheel choices (4 in. narrower than Crown Vic) * Fits 14 in. and larger wheels. If using more than 4.5 in. of backspacing, 18 in. wheels are required * Motor mount "loops" connect cradle to frame rails to reinforce frame * Motor mount options for Modular Ford, Ford FE, and Small Block Ford, Chevy LS / Small Block / Big Block * Front sway bar measures 1.5 in. x .250 wall and provides confident cornering and smooth ride * Adjustable bump stops * Rack and pinion steering conversion with 15.5 in. center to center bushing mounts for 1979-93 Mustang-style steering rack * Includes billet adjustable tie rods * Bump steer has been virtually eliminated * Adaptable to stock steering column using kit 12319505; includes column adapter, U-Joint and shaft. * High-quality satin black powdercoat finish * Entire system saves approximately 130 lbs. from the front of the truck Rear 4-LINK SUSPENSION: * Removes factory leaf spring suspension and bracketry * Complete parallel 4-link with panhard and C-notches * Works with coilover or Shockwave air suspension * Includes R-Joints on all links for smooth, bind-free, quiet operation and long life * Optimized roll center and anti-squat (60 percent anti-dive) for amazing traction and elimination of wheel hop * High-quality satin black powdercoat finish * Reduces rear weight by 50 lbs. * 1965-1972: No bed modification needed * 1973-1979: Slight bed support rail modification needed (not visible from the top side of the truck * Compatible with short bed and long bed trucks * Adjustable coilover suspension system
Not Yet Reviewed
$8,610.00
South Bend Clutch Stage 2 Endurance clutch kits are recommended for daily and street use with an emphasis on rally and endurance racing. An SFI-approved single-mass flywheel is recommended for racing climate applications in order to achieve optimal performance (flywheel not included). Order the clutch kit recommended for your vehicle application. Features include: * Designed for the racing environment * Pressure plate is precision-balanced for vibration-free operation at high-rpm * Pressure plate fulcrum is altered for a positive disengagement and a quick shift * Disc is engineered with a dual-damped design to provide accurate control when accelerating through corners * Hybrid friction material with a full face Feramic (sintered iron) lining on the flywheel side and a high metal content organic lining on the pressure plate side * Engagement is positive, yet buffered due to the high graphite content unique to Feramic facings
( 2 )
$977.84
Baer Brakes Baer Claw Extreme+ disc brake systems are Baer's flagship offerings, featuring their forged Monoblock calipers mounted to 2-piece rotors. The Extreme+ systems employ current state-of-the-art race technology usually only found in very expensive race calipers. Baer now brings that technology to the road-going market. The 6S line of calipers represent Baer's most aggressive road offering and are suitable for virtually any level of track use. Optional R-Spec 6R calipers are a race version of 6S calipers; available for any Extreme+ system. The R-Spec calipers feature additional machining to the 6S calipers to save close to 2 lbs. per caliper and allow for top-loaded pads. Over 400 models are available for specific vehicle, bolt pattern, and axle applications. Features include: * MonoBlock calipers machined from a single piece of 2618 forged aluminum * The only 6-piston, forged, mono-block calipers offered to the road-going/street market * Stainless steel pistons, abutments, and noise-suppression springs * Staggered piston sizes to minimize pad wear * Uses the common D1247 (DR11) race pad backing plate, shared by many competition calipers * Dual seals (dust/weather and pressure) to meet D.O.T specifications * Caliper can accept 13.5 in. to 16 in. rotors * Machined, hand-painted logos * Available in a variety of powdercoat finishes * Uses correct banjo-style fittings; Baer does not use any pipe thread * Available for front or rear * Offers the exact same look front and rear—the only brake manufacturer that offers this! * Rear systems incorporate a drum-in-hat parking brake * Rear systems for C-clip axles include Baer's Verislide self-centering brackets * Systems include everything needed for each corner, including hoses and fittings (except for general fit applications)
Not Yet Reviewed
$3,499.95
—
$3,994.95
ReadyLift Suspension SST2.1 lift kits offer your truck improved stance, performance, and capability, along with the ability to clear larger wheels and tires. These vehicle-specific kits feature performance-tuned Falcon 2.1 dampers/shocks on all four corners, providing a better-than-factory feel. Along with the Falcons, each kit provides complementing components for excellent handling, control, and stability. Select the kit designed for your vehicle. Falcon features and benefits: * Improved dynamic roll control and low-speed damping * Dramatic improvement in on-road comfort and off-road performance * Optimized fitment for unobstructed suspension travel and articulation * 6061 T-6 aluminum alloy shock body resists impact to protect internal components * Smooth-honed internal shock body surface for long-term performance * 3/4 in. induction hardened chrome plated shaft resists rock damage, corrosion, and shaft buckling * Large shaft diameter provides a wide range of adjustments on adjustable shocks * Hard anodized 6061 T-6 aluminum alloy billet piston * One-piece PTFE bronze piston wear band with O-ring
Not Yet Reviewed
$2,149.95
Earl's Performance remote electric water pump plumbing kits simplify the installation of a remote-mounted electric water pump on your LS Series engine. The special adjustable coolant crossover tubes eliminate tees, Y-blocks, and extra hose ends normally used to make all your connections. The block adapters feature -12 AN O-ring ports for easy maintenance and a leak-free seal. You'll appreciate the simple, clean remote electric water pump plumbing these Earl's Performance kits provide for your LS engine. Kit features, items, and specs include: * Billet aluminum construction with black anodized finish for a great look and corrosion protection * 2 adjustable crossover tubes (fitting centers 6.8 to 10.5 in.) * Block adapters with 1/8 in. NPT ports for connection of the steam tube hose * 2 port fittings * Hardware * Inlet/outlet size: -16 AN male flares * Flexible--inlet/outlets can be on either side of the engine * Overall length 9.8 to 13.5 in. (depending on application)
Not Yet Reviewed
$576.95
Installation is a snap with Dominator adjustable Modified valance kits. Choose from a wide variety of colors and add an amazing final touch to your Modified race car. These valance kits will not dig into the track when rolling over into the corners. Each Dominator adjustable Modified valance kit includes an adjustable center (50 in. wide x 6 in. deep), plus left and right sides (both 30 in. long).
Not Yet Reviewed
$29.99
Solve those LS engine cooling issues with a Philadelphia Racing Products coolant crossover plumbing kit. Each kit comes with all of the necessary parts to complete a 4-corner water crossover on your LS engine, including -4 AN hose and aluminum fittings to fully plumb your project just the way you want it.
Not Yet Reviewed
$229.99
UMI Performance 1993-2002 GM F-body road race competition front lower A-arm kits provide a rock-solid foundation for your autocross, road race or corner carving 4th Gen. These heavy-duty boxed lower A-arms have dual rod ends and are fully gusseted box tubing construction that combines strength with a five pound weight savings per set over factory lower A-arms. Shock mounting is a double shear with a 1/2 in. dia. x 1 1/4 in. width racing coilover mount—suitable for most racing coilover systems. Revised ball joint location adds a nominal 2 degrees caster increase. These arms have double shear sway bar mount tabs with end link set included and are designed to work with the factory K-member, UMI K-members, and virtually all aftermarket K-members. Whether it's at the race track or for an added improvement to your daily driver, UMI Performance has A-arm kits designed to outperform the stock setup. Product features: * Construction 0.120 in. wall mild steel box tubing * Available in durable red or black powdercoat finishes * 1/2 in. diameter x 1 1/4 in. width racing coilover mount * 5 lbs. lighter than factory A-arms * Double shear sway bar mount with end link set included * Nominal 2 degree caster increase potential * Double gusset design for flex-free operation * TIG-welded 4140 CrMo threaded tube adapters * Premium ball joints installed * Race quality high misalignment rod end on vertical mount * CNC machined ball joint cups, tubing radiuses and mounting plates * Uses OEM hardware or UMI hardware kit that includes Grade 10.9 bolts, washers, and lock nuts Note: Not for use with T-bar lower. Requires 1/2 in. diameter racing lower with bearing only.
Not Yet Reviewed
$749.99
RideTech RidePro E5 Air Ride Suspension Control AirPod dual compressor systems are pre-wired solutions that mount in your vehicle as a single unit and adjust vehicle height at the push of a button while maintaining balanced air springs. With sophisticated pressure and height algorithms, RidePro E5 control systems tune air ride suspension for proper handling and world-class ride quality, so that each time your turn the ignition key, RidePro E5 self-adjusts to ride height and compensates for changes in load. And adjusting vehicle height is as simple as choosing one of three presets. You can also control the system wirelessly by simply connecting a compatible smartphone via Bluetooth and using the RidePro E5 app. RideTech RidePro E5 AirPod systems feature and include: * Full color TFT LCD. 3.5 in. display with multi-touch capacitive touchscreen * 4-button silicone keypad with backlit symbols for quick vehicle height changes * "Ride Height On Start" automatic lift and level feature * Display and setup via control panel, smartphone app or laptop * Weatherproof ECM and heavy-duty connectors * Automatic weight compensation (with optional height sensors) * Bluetooth connectivity to most smartphones for wireless control * Aluminum AirPod 5-gallon tank * RidePro E5 digital control * Dual compressors * 1/4 in. valves * Perfect for vehicles over 3,500 lbs.
( 1 )
$2,865.00
RideTech RidePro E5 Air Ride Suspension Control dual compressor systems are pre-wired solutions that mount in your vehicle as a single unit and adjust vehicle height at the push of a button while maintaining balanced air springs. With sophisticated pressure and height algorithms, RidePro E5 control systems tune air ride suspension for proper handling and world-class ride quality, so that each time your turn the ignition key, RidePro E5 self-adjusts to ride height and compensates for changes in load. And adjusting vehicle height is as simple as choosing one of three presets. You can also control the system wirelessly by simply connecting a compatible smartphone via Bluetooth and using the RidePro E5 app. RideTech RidePro E5 systems feature and include: * Full color TFT LCD. 3.5 in. display with multi-touch capacitive touchscreen * 4-button silicone keypad with backlit symbols for quick vehicle height changes * "Ride Height On Start" automatic lift and level feature * Display and setup via control panel, smartphone app or laptop * Weatherproof ECM and heavy-duty connectors * Automatic weight compensation (with optional height sensors) * Bluetooth connectivity to most smartphones for wireless control * Aluminum 5-gallon tank * RidePro E5 digital control * Two Thomas compressors * 1/4 in. air lines and fittings * Perfect for vehicles over 3,500 lbs.
Not Yet Reviewed
$2,665.00
RideTech RidePro E5 Air Ride Suspension Control single compressor systems adjust vehicle height at the push of a button while maintaining balanced air springs. With sophisticated pressure and height algorithms, RidePro E5 control systems tune air ride suspension for proper handling and world-class ride quality, so that each time your turn the ignition key, RidePro E5 self-adjusts to ride height and compensates for changes in load. And adjusting vehicle height is as simple as choosing one of three presets. You can also control the system wirelessly by simply connecting a compatible smartphone via Bluetooth and using the RidePro E5 app. RideTech RidePro E5 single systems feature and include: * Full color TFT LCD. 3.5 in. display with multi-touch capacitive touchscreen * 4-button silicone keypad with backlit symbols for quick vehicle height changes * "Ride Height On Start" automatic lift and level feature * Display and setup via control panel, smartphone app or laptop * Weatherproof ECM and heavy-duty connectors * Automatic weight compensation (with optional height sensors) * Bluetooth connectivity to most smartphones for wireless control * Aluminum 3-gallon tank * RidePro valves * Thomas compressor * 1/4 in. air lines and fittings * Perfect for vehicles up to 3,500 lbs.
Not Yet Reviewed
$2,415.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
