Availability
Showing In Stock Items. Show All 18 Items.
On Sale
Flowmaster patented Delta Flow technology was used to create the Delta Force 10 Series mufflers. They provide maximum scavenging, for added torque and horsepower in race applications where mufflers are required. This revolutionary technology has allowed Flowmaster to shrink case sizes for improved ground clearance. Flowmaster builds this series of mufflers by hand to ensure that they are the very best, in the most demanding environments. These are the mufflers to use when all that counts is winning!
( 17 )
$275.95
$107.95
—
$166.95
On Sale
Looking for the most aggressive sound in the Flowmaster muffler line? Then take a look at their 40 Series mufflers. Designed for use on street and strip vehicles, they take the sound waves produced in the exhaust, and cancel them against angled baffles built into the muffler case. This improves both horsepower and fuel economy. Best of all, they allow you to hear that cool Flowmaster tone inside of the vehicle, as well as outside. So, if you want more power and less noise, then you've got to get Flowmaster 40 Series mufflers.
( 356 )
$449.95
$99.95
—
$337.95
Flowmaster FlowFX active dual mode mufflers allow your exhaust tone to be mild or wild. With their split personalities, these direct-fit mufflers offer a nice performance tone—as well as a deep open exhaust sound with just a push of a button, thanks to the wireless controlled actuator valve on the Power Chamber, which redirects exhaust through the turndown. FlowFX systems feature mandrel-bent stainless steel construction, and include actuator motor, control unit, two wireless key fobs, all necessary wiring, hardware, and detailed instructions. Order the kit recommended for your vehicle.
( 1 )
$875.95
—
$1,099.95
On Sale
These Super 40 Flowmaster mufflers significantly outflow the older two-chamber mufflers. They help create even more horsepower with less interior noise and a deeper exterior sound. These mufflers feature a design patterned after Flowmaster's race mufflers. These Flowmaster mufflers far exceed older models on Dyno tests. They create a beautiful hot rod sound, along with increased horsepower and gas mileage. So, if you want to get that hot rod sound and add some horsepower, then these Flowmaster mufflers have you covered.
( 185 )
$165.95
$107.95
—
$189.95
Flowmaster 50 Series Delta Flow mufflers are designed to produce a mellow, deep sound. They're milder on the outside of the vehicle than the 40 Series mufflers and are significantly quieter on the inside. These mufflers combine the increased horsepower and torque you've come to expect from Delta Flow technology with the performance sound and feel that makes Flowmaster famous.
( 364 )
$164.95
—
$184.95
On Sale
Flowmaster Super 44 Series mufflers use the same technology as the original Super 40 mufflers—but also offer some distinct advantages. The Super 44s deliver a deep, rich tone with an improved flow path radius, optimum internal flow, and sound control engineering, all created with Delta Flow technology. They're the most aggressive, deepest sounding, highest performing 4 in. case street mufflers that Flowmaster has ever built. These American-made, all-black mufflers exceed OEM specifications for use on street cars, race cars, and sport trucks. Super 44s are ideal when dynamic sound, torque, and horsepower improvements are demanded in a smaller high performance muffler. Their maximum performance and improved flow path will generate more torque and power than ever before! If you really want to hear your exhaust system inside as well as outside of your vehicle, then order the Flowmaster Super 44 muffler best suited to fit your application.
( 397 )
$134.95
$87.95
—
$178.95
Producing an aggressive muscle car sound, the Flowmaster 80 Series crossflow mufflers are specially designed for applications where the muffler must be mounted transversely behind the rear axle. Whether you need to match an OEM exhaust system or are looking for increased ground clearance, these mufflers fit the bill. They are available in your choice of single inlet/dual outlet or dual inlet/dual outlet configurations--order yours today!
( 29 )
$176.95
—
$249.95
On Sale
Flowmaster Stainless Steel Super 44 mufflers offer distinct advantages over original 40 Series mufflers, while using the same technology. The Stainless Steel Super 44 mufflers deliver a deep, rich tone with an improved flow path radius, optimum internal flow, and sound control engineering, all created with Flowmaster's Delta Flow technology. They are the most aggressive, deepest sounding, highest performing 4 in. case street mufflers that Flowmaster has ever built, exceeding OEM specifications for use on street cars, race cars, and sport trucks. They are ideal when dynamic sound, torque, and horsepower improvements are demanded in a smaller high performance muffler. Their maximum performance and improved flow path will generate more torque and power than ever before! If you really want to hear your exhaust system inside as well as outside of your vehicle, then these Stainless Steel Super 44 Flowmaster mufflers are for you.
( 111 )
$136.95
$89.95
—
$136.95
Looking for the most aggressive sound in the Flowmaster muffler line? Then take a look at Flowmaster stainless steel 40 Series mufflers. Designed for use on street and strip vehicles, they take the sound waves produced in the exhaust, and cancel them against angled baffles built into the muffler case. This improves both horsepower and fuel economy. Best of all, these mufflers allow you to hear that cool Flowmaster tone inside of the vehicle, as well as outside of it. So, if you want more power and less noise, then you need to acquire these Flowmaster stainless steel 40 Series mufflers.
( 58 )
$132.95
Flowmaster 50 series Big Block mufflers have proven to not only significantly improve acceleration and towing power, but to simultaneously increase fuel economy as well. Because of their efficiency, underhood temperatures on trucks and motor homes can be reduced as much as 200 degrees F--helping to lengthen the service life of other engine components. These mufflers are designed and sized for larger gas and diesel engines typically used in towing vehicles and RVs. So, for more comfortable cruising, Flowmaster tuned them for reduced exterior exhaust sound and lower levels of interior resonance.
( 33 )
$283.95
—
$299.95
On Sale
Flowmaster Outlaw Series exhaust systems are mandrel-bent for maximum performance and include specially designed mufflers. They deliver bold, dynamic interior and exterior tones for enthusiasts who covet the most aggressive components available. These systems include hardware and tips, where applicable--so installation is quick and easy. The kits are available in dozens of configurations for fitment on specific vehicles, including standard, crew, extended, and extended crew truck cabs; and long or short bed lengths. Order the Flowmaster Outlaw model designed for your application.
( 272 )
$1,349.95
$414.95
—
$1,899.95
Flowmaster Super 10 Series mufflers are intended for those who crave a loud, aggressive exhaust note. They are manufactured from 16-gauge, MIG-welded 409 stainless steel, and feature patented Delta Flow technology for optimum performance. These premium mufflers are offered in various sizes, finishes, and designs, with single or dual inlets and outlets, and are intended only for off-road or race applications.
( 343 )
$166.95
On Sale
Flowmaster American Thunder exhaust systems are designed with the latest exhaust technology available--resulting in improved acceleration, passing power, and fuel mileage. A key to these performance upgrades is Flowmaster's use of mandrel-bent tubing, which allows superior exhaust gas flow. The systems also feature mufflers (single or dual) that deliver plenty of the rich Flowmaster sound you expect. Components are built from stainless steel or aluminized steel; and some models include tips. American Thunder exhausts are available in more than a hundred configurations for fitment on specific truck and car applications.
( 545 )
$1,199.95
$422.95
—
$1,799.95
On Sale
Flowmaster Force II exhaust systems are engineered with the latest technology for improvements in acceleration, passing power, and fuel mileage. The key to these performance enhancements is the use of mandrel-bent tubing. Force II assemblies are available in dozens of muffler and pipe configurations for fitment on thousands of year/make/model cars and trucks. Choose the size and style that's compatible with your engine type.
( 230 )
$899.95
$449.95
—
$1,799.95
On Sale
Flowmaster Stainless Steel American Thunder exhaust systems have been designed with the latest exhaust technology available. Through this technology, you will experience improvements in acceleration, passing power, and fuel mileage. The key to these performance improvements is Flowmaster's use of mandrel-bent tubing. Their tubing allows for superior exhaust gas flow, while their stainless steel construction allows for their corrosion-resistant qualities. These American Thunder exhaust systems also feature a stainless steel muffler(s) that'll give you plenty of Flowmaster sound.
( 302 )
$999.95
$494.95
—
$1,229.95
On Sale
Flowmaster Force II cat-back exhaust systems have been designed using the latest technology available--providing improved acceleration, passing power, and fuel mileage. The key to these performance upgrades is the use of mandrel-bent tubing, which allows for superior exhaust gas flow. The Force II systems are built with aluminized steel to resist corrosion. Order the exhaust fitment for your particular make and model.
( 20 )
$1,049.95
$682.95
—
$1,249.95
On Sale
These stainless steel Force II exhaust systems have been designed with the latest exhaust technology available. Through this technology, you will experience improvements in acceleration, passing power, and fuel mileage. The key to these performance improvements is the use of mandrel-bent tubing. The tubing allows for superior exhaust gas flow, while stainless steel construction has been utilized for its corrosion-resistant qualities.
( 74 )
$949.95
$584.95
—
$1,249.95
On Sale
Shafer's Classic Reproductions exhaust systems are available for a variety of popular classic vehicles—most in your choice of aluminized or stainless steel tubing. These complete exhaust systems are available as accurate OE replicas, or with a number of high performance options and variations. Shafer's exhaust systems are manufactured to OEM specifications using state-of-the-art CNC equipment. Laser-scanned from original factory components, the data is stored for use by the pipe benders, resulting in correctly bent tubing accurate to within 0.0005 in. for an exact duplicate each time the part is produced. Options for Shafer's Classic Reproductions exhaust systems include (depending on the model): * Fitments for various headers and OE-type manifolds * Tailpipe exits * X-pipes * H-pipes * Glasspack, turbo, chambered, or OE-replacement mufflers
( 51 )
$799.99
$719.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
