Free Shipping on Orders Over $125 at Summit Racing

Currie 9 in. Crate Rear End Assemblies

Currie 9 in. crate rear end assemblies offer a direct-fit, bolt-in solution for most common car, truck, and Jeep platforms. They feature larger spline axles, heavy-duty components, and internals from leading manufacturers. These axle assemblies are built to exacting standards matching factory specifications for suspension mounting points, pinion location, overall axle width, and wheel bolt pattern for hassle-free installation. Prior to shipping, skilled craftsman meticulously assemble essential parts to deliver years of trouble-free operation for your vehicle. They offer a broad range of gear ratios, performance differentials, or even a spool—if that's your thing. You'll be ready in no time for cruising, racing, off-roading, or just daily driving with Currie 9 in. crate rear end assemblies. Order the kit designed to fit your specific model.

3.67 out of 5 stars ( 6 )

$1,550.00

—

$5,100.99

Currie 9 in. Rear-End Housing Assemblies

Direct-fit Currie 9 in. rear-end axle housing assemblies have OE mounting points designed specifically for your application. This means that you won't have to spend hours cutting and welding in order to install them. These assemblies are available with disc or drum brakes, axles, bearings, and seals--everything you need to upgrade your rear-end, courtesy of Currie Enterprises.

5.0 out of 5 stars ( 7 )

$1,250.99

—

$1,750.99

Currie Rear Disc Brake Kits

Currie rear disc brake kits are designed to upgrade from your aging or unwanted drum-style brakes. They're available with solid or vented construction, and a cross-drilled or solid surface, depending on your application. Currie Enterprises rear disc brake kits feature: * New rotors * Backing plates * Calipers with internal drum parking brake * Brake pads * All necessary mounting hardware

2.0 out of 5 stars ( 1 )

$800.99

Currie Cut-to-Fit Axles for Small Bearing Housing Ends

Currie Cut-To-Fit axles for small bearing housing ends allow you to attain the axle length needed and still have adequate spline engagement into your 3rd member. These 28-spline CTF 9 in. axles are available in two different lengths. Both feature a 4 in. spline length in which up to 3 in. of the spline length may be cut off. Features: * Induction heat-treated forged alloy steel construction * 2.525 in. brake space dimension (stock for 1964-72 Mustang, Falcon, Fairlane, and Maverick rear-ends) * Available in 28 and 32 in. lengths * Stock 1964-72 Mustang (5 x 4.5 in.) wheel bolt pattern * Includes: --Five 1/2 in.-20 Ford-style wheel studs --One heavy-duty small bearing-style retainer plate --One high-quality small axle bearing with retaining collar --One axle seal

5.0 out of 5 stars ( 1 )

$275.00

Currie Universal Steel Hard Brake Line Kits

Currie universal steel hard brake line kits are designed for the rear housing on your vehicle. The kits include two lengths of steel hard line tubing that are flared on one end, four double flare fittings, and the rubber brake hose to go from the housing up to the frame. The hose features a bulkhead fitting on one end to tie into your vehicle's existing brake lines, and a block on the opposite end that the two hard lines install into, as well as a through hole for attaching the block to the housing. Tubing bending and flaring equipment is necessary for the installation of these kits..

4.75 out of 5 stars ( 4 )

$84.99

Currie Third Member Service/Installation Kits

Currie third member service/installation kits are the easiest solution when making changes to your rear end. Each kit includes three liters of Currie 85-140 weight GL-6 Racing gear oil, a gasket, and the fasteners necessary to service the fluid in your 8 or 9 in. Ford axle!

5.0 out of 5 stars ( 7 )

$65.00

Currie 9 in. Ridetech Housing and Axle Packages

If you are considering Ridetech's coilover suspension system for the back of your vehicle, don't let the rearend stop you! Currie 9 in. Ridetech housing and axle packages are available in stock axle width or narrowed for mini-tubs, and feature the stock pinion offset (drive shaft location) and wheel bolt pattern with Ridetech 4-link suspension and sway bar brackets installed for a straightforward, hassle-free installation. Features: * Currie Centurion high-strength 9 in. notchback housing with flush drain plug * Ridetech 4-link brackets installed * Available in stock or mini-tub widths * Currie Performance 31-spline axles with wheel studs installed * Tapered axle bearings and heavy-duty retainers

4.0 out of 5 stars ( 1 )

$1,750.00

—

$1,750.99

Currie Turn 9 Housing and Axle Packages

Currie Turn 9 hosing and axle packages are complete, ready to bolt-in assemblies built to match the vehicles stock axle width, pinion offset, suspension mounting locations, and wheel bolt pattern for a straightforward hassle-free installation. Included standard features: * Currie Turn 9 housing features high-strength fabricated 4130 chromoly steel center section with internal tube gussets and CNC-machined face flange, with 3 in. diameter chromoly axle tubes, all joined with strong, attractive welds to deliver superior strength and durability * Torque arm mount—fabricated, heavy-duty mount provides OEM fitment for compatibility with stock or aftermarket torque arms * Heavy-duty, laser-cut suspension brackets installed on the housing, matching the stock OE locations and fitment for a direct bolt-in fit * CNC-machined billet housing ends with provisions for internal or external axle oil seals * Currie Performance 31-spline 1541 alloy axles with tapered axle bearings * Bearing retainers assure positive bearing retention and full seal engagement Please note: These packages require a 9 in. third member assembly and compatible brake package to complete the rear-end, and will require assembly of components prior to installation.

Not Yet Reviewed

$1,900.99

Ridetech 1964-67 GM A-Body Coilover Suspension Systems

Ridetech 1964-67 GM A-body coilover suspension systems are specifically designed for the 1964-67 GM A-body platform. The package contains front upper and lower control arms, tall spindles, front and rear MUSCLEBars, rear Strongarms, and four HQ Series coilovers. Ridetech 1964-67 GM A-body coilover suspension kits include everything needed to create modern drivability from vintage muscle. Features, parts, and specs: * Tall spindles will induce more negative camber gain to maximize tire contact patch during cornering (they also offer a 2 in. pin drop which allows for longer shocks creating more suspension travel) * Upper Strongarms feature corrected ball joint angles for the tall spindles * Upper ball joints have been moved back to allow for additional caster setting (improves high speed stability and steering feel; offset slugs available for additional caster) * Injection-molded Delrin bushings with 13 percent PTFE used to reduce deflection and stiction * Lower Strongarms feature a double-sheer lower mount for increased strength * Dropped lower shock mount to increase suspension travel * Lower ball joint moved forward to increase caster settings, while keeping the wheel centered in the wheel opening * HQ Series Shockwaves allow fine-tuning and deliver excellent ride quality and handling with a 1,000,0001 mile warranty (rebound knob located on top of shock for underhood access) * Brackets included with rear coilovers for easy attachment to the frame and the 10/12 bolt rear-end or Currie 9 in. (brackets for a Moser rear-end also available) * Front MUSCLEBar helps reduce body roll and creates room for wider front tires (includes PosiLink endlinks that provide immediate engagement between chassis and control arms) * Rear Strongarms provide added strength to help get the power to the pavement; they utilize R-joint technology to combine the best qualities of low-friction movement, lateral stability, full range articulation, and quiet operation into one special bearing

Not Yet Reviewed

$5,645.00

UMI Performance 1964-72 GM A-Body Rear Coilover Kits

UMI Performance 1964-72 GM A-Body rear coilover kits allow for ride height adjustments ranging from a -2 in. to -3 in. drop, along with spring rate and damping modifications. Each kit includes a reinforced upper mount that bolts directly in place (requiring one additional hole to be drilled) and accommodates a true 2 1/2 in. racing coilover with a double-shear mount. It also features FEA-designed reinforced lower brackets that bolt directly over the stock rear lower control arm mounts and utilize the existing lower shock hole(s). The 2-hole trailing arm height adjustment enables fine-tuning of the instant center location for drag launches or autocross/road race rear steer tuning. Viking Performance shocks offer 19-way adjustments for both compression and rebound. The 2 1/2 in. coilover springs come in various rates suitable for drag use, street driving, and autocross/road racing. Please note that these kits are intended for a -2 to -3 in. Pro-Tour style lowering and are compatible only with factory GM axle housings. They may not fit aftermarket housings such as Quick Performance, Currie, or Moser. Optional add-ons like thrust bearings and a spanner wrench are recommended for easier adjustments. A shock tower brace for additional chassis reinforcement is also available separately. The kits are meant solely for lowering purposes, and welding may be necessary for drag use on vehicles running 10.50 or faster. Product features: * Ride height adjustment from -2 in. to -3 in. drop * Spring rate and damping adjustments * Trailing arm adjustment for fine-tuning of instant center * Reinforced upper mount with direct bolt-in installation * Holds a true 2 1/2 in. racing coilover with double-shear mount * FEA designed reinforced lower brackets bolt directly over stock rear lower control arm mounts * 2-hole trailing arm height adjustment for fine-tuning of instant center location * Viking Performance shock with 19-way adjustable compression and rebound * 2 1/2 in. coilover springs available in different rates * 100 percent designed, manufactured, and raced out of Philipsburg, PA * 3 spring ratings available * Viking Warrior shocks * 19 compression and rebound adjustments

Not Yet Reviewed

$1,805.99

Ridetech 1968-72 GM A-Body Complete Coilover Systems

Ridetech 1968-72 GM A-body complete coilover systems include everything necessary to create modern drivability for your vintage GM muscle car. All the parts are designed to maximize tire contact, while providing high-speed stability and steering feel. The included rear Strongarms utilize Ridetech's innovative R-Joint technology—combining the best qualities of low-friction movement, lateral stability, full-range articulation, and quiet operation in one bearing. Take the guesswork out of purchasing a new suspension for your classic with a Ridetech complete coilover system. Kit items, features, and specs: * Front upper and lower control arms * Tall spindles induce more negative camber gain, allowing tires to lean into the turn—and allowing for longer shocks and more suspension travel * Upper and lower front Strongarms include Delrin bushings to reduce deflection and stiction * Four HQ Series coilovers allow fine tuning via rebound knob at the top of the shock; they come standard with a 1,000,0001-mile warranty * Brackets included with rear coilovers for easy attachment to frame and rear-end * Front MUSCLEBar helps reduce body roll, creates room for wider front tires, and includes PosiLink end links for immediate engagement between chassis and control arms * Adjustable-rate rear MUSCLEBar

Not Yet Reviewed

$5,645.99

Wilwood Forged DynaPro Low-Profile Rear Parking Brake Kits

For popular musclecar rear axle applications needing a parking brake assembly and some extra clearance, Wilwood Forged DynaPro low-profile rear parking disc brake kits provide the solution. Forged billet DynaPro low-profile 4-piston calipers, 11 in. one-piece hat and rotor assemblies, and high-friction pads provide optimal balanced braking for your performance street/strip and show machines. Choose either solid-surface or cross-drilled and slotted rotors to personalize your style and optimize brake performance. These Wilwood brake kits also feature a neatly hidden internal shoe system for a clean installation and superior static holding power for parking. Get bolt-on performance and looks for competition or show with Wilwood Forged Dynapro low-profile rear parking disc brake kits.

4.65 out of 5 stars ( 71 )

$1,114.44

Skyjacker Single Flex Control Arms

These single flex control arms from Skyjacker are fitted with a spherical rod end on one side, and a greasable polyurethane bushing on the other. They're available in upper and lower arms for a variety of applications.

5.0 out of 5 stars ( 1 )

$761.56

13 Results Found For "Currie rear end"