Free Shipping on Orders Over $109 at Summit Racing

On Sale

MSD Pro-Billet Distributors

MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.

4.75 out of 5 stars ( 407 )

$849.95

$350.95

—

$763.95

On Sale

MSD Pro-Billet Ignition Bundles

MSD Pro-Billet ignition bundles contain performance components to breathe new life into your engine. Available with different Pro-Billet distributors; select the kit with the distributor for your engine. Contents and features: * Pro Billet distributor -- CNC machined billet aluminum housing and billet aluminum base -- Polished steel shaft is QPQ coated and guided by a sealed ball bearing -- Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the rpm range * Blaster 2 coil -- Improved spark output -- Alkyd tower with high dielectric properties is less prone to carbon tracking -- 100:1 turns ratio and lower primary resistance produce high-voltage output -- Metal canister is filled with a premium grade oil for cooling * Red MSD 6 AL Digital ignition box -- High output with 530 volts and 135mJ of spark energy -- Set an rpm limit with two rotary dials in 100 rpm increments -- Built-in LED for system checks -- All wires exit through a locked, sealed connector

5.0 out of 5 stars ( 3 )

$716.95

—

$767.95

$644.95

—

$690.95

On Sale

MSD Pro-Billet Ready-to-Run Distributors

MSD Pro-Billet Ready-to-Run distributors are the perfect upgrade for weak OE electronic distributors, outdated points distributors, and large HEIs or DuraSparks. All that's required is to install the distributor in the engine, and connect three wires and the coil! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. It will smooth out the engine's idle, improve starting, and perform at a much higher rpm. The housing is machined from billet 6061-T6 aluminum, using state-of-the-art CNC mills and lathes for a unit with no porosity or weak areas. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing, while an extra-long sintered bushing guides the shaft at the base of the housing. This shaft also receives a QPQ coating for low friction wear and resistance against corrosion from humidity and ozone buildup. The distributors feature MSD's adjustable mechanical advance, which allows you to custom-tailor an ignition curve to match your engine's needs. Most models are also available with a vacuum advance canister to help improve economy. Order the model recommended for your vehicle and engine application.

4.32 out of 5 stars ( 333 )

$870.95

$459.95

—

$782.95

Summit Racing™ Billet Throttle Bodies

Summit Racing™ billet throttle bodies are designed with larger openings (92mm or 102mm) to improve throttle response and provide maximum airflow. They're precision CNC-machined from billet aluminum and available in your choice of natural or black anodized finishes. Feed your LS engine the air it needs—and unleash its hidden horsepower! Order the Summit Racing™ replacement throttle body recommended for your vehicle.

4.83 out of 5 stars ( 29 )

$169.99

—

$180.99

Summit Racing™ Inline Billet Fuel Filters

How would you like to keep your fuel system debris-free for more efficient performance? It's easier than you think! Just mount one of these Summit Racing™ inline billet fuel filters—and forget about dirt and grunge invading your fuel and related components. The filters are made of billet aluminum for strength, and are available in different anodized filter housing finishes. You can also select inlet/outlet sizes, and the fuel filter's particle-catching capability, including ranges from 10 to 100 microns.

4.82 out of 5 stars ( 181 )

$16.99

—

$89.99

Summit Racing™ Billet Steel Timing Sets

Trust Summit Racing™ to give you timing sets that will deliver accurate, reliable cam timing. Our billet steel true roller timing sets have rugged double-row, true-roller chains teamed up with billet steel crank and cam sprockets. The crank sprockets have multiple keyways, which allow you to modify your cam timing. Get reliable timing from Summit Racing™ billet steel timing sets.

4.78 out of 5 stars ( 120 )

$101.99

—

$237.99

Summit Racing™ Billet Distributors

Our Summit Racing™ billet distributors provide reliable spark throughout the rpm range, so they'll deliver the performance you need, no matter what you drive--race car, street machine, or hauler. The affordable distributors have high-dollar features that outperform the competition, like a lightweight aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black alkyd cap and an adjustable mechanical advance, so you can precisely tune the curve to your engine setup. Some models also feature vacuum advance. An ignition box is required for use with Summit Racing™ billet distributors.

4.51 out of 5 stars ( 166 )

$188.99

—

$304.99

On Sale

Holley HP Billet Fuel Pressure Regulators

Part of Holley's complete line of fuel system products, Holley HP billet fuel pressure regulators are available in a variety of configurations for carbureted or fuel injected engines. Some versions are even adaptable to either carburetors or EFI. They allow you to upgrade a carbureted system to EFI without replacing the fuel pressure regulator. All HP billet fuel pressure regulators feature a 2-port design, provide for precise fuel pressure adjustments, and are available in your choice of demand (no return line) or by-pass (with a return line) styles. Depending on the model, they are for use only with electric fuel pumps, or with either mechanical or electric pumps. Designed for street/strip applications, they are CNC-machined from 6061 T-6 billet aluminum for strength and have bright dip anodized black bodies with clear dip anodized tops for corrosion resistance and good looks. Whatever your fuel system needs, Holley has you covered. Depending on model, features may include: * Adjustable from 4 to 65 psi for use with EFI or carburetors * 4.5 to 9 psi adjustment range for use with carburetors only * EFI-only models are adjustable from 15 to 65 psi * Two port sizes available, 3/8 in. NPT or -6 AN inlet/outlet and return (where applicable) * Fitting for manifold reference * 1/8 in. NPT gauge port * Boost reference--1:1

3.86 out of 5 stars ( 165 )

$152.95

—

$278.95

$137.65

—

$251.05

Summit Racing™ Ready-to-Run Billet Distributors

Our Summit Racing™ Ready-to-Run billet distributors provide reliable spark throughout the rpm range, so they'll deliver the performance you need, no matter what you drive--race car, street machine, or hauler. The affordable distributors have high-dollar features that outperform the competition, like a lightweight aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black alkyd cap and some models also feature vacuum advance. An ignition box is not required for use with Summit Racing™ Ready-to-Run billet distributors except when used with an aftermarket EFI system.

4.03 out of 5 stars ( 30 )

$249.99

—

$359.99

Summit Racing™ Pro LS Billet Adjustable Single Row Timing Chain Sets and Gears

Summit Racing™ Pro LS Billet adjustable timing sets and gears provide maximum strength and reliability for your engine build. These single-row chains are precision machined and available in standard, 0.005 under, and 0.010 under lengths for align-honed blocks. Summit Racing™ Pro LS Billet adjustable timing sets and gears work with 3-bolt performance cams and come in both 1x and 4x configurations to match any LS engine. More product features include: * Captured degree bushings that allow the cam to be advanced or retarded in 2-degree increments * The upper gears are compatible with factory LS2 timing chains

4.79 out of 5 stars ( 14 )

$127.99

—

$141.99

Summit Racing™ Billet Aluminum Throttle Cable Brackets

Our Summit Racing™ billet aluminum throttle cable brackets solve common installation headaches, look good doing it, and won't break the bank. The billet throttle cable brackets fit Summit M2008 series carburetors as well as Holley 4150 and 4160 series carburetors, mount to the carburetor base, and include a return spring and installation hardware.

4.41 out of 5 stars ( 147 )

$73.99

—

$79.99

Meziere True Billet Flexplates

Meziere true billet flexplates are the superior choice for quality and precision. These key engine components are machined to exacting tolerances from 4340 round bar steel. Meziere's proprietary manufacturing process ensures the strongest gear teeth, the least runout, and best longevity on the market. All of the replacement flexplates are certified to at least SFI 29.2, and they're available for fitment on vehicles from 1955 and forward.

4.86 out of 5 stars ( 21 )

$495.77

—

$689.10

RAM Billet Steel Flywheels

Cast flywheels are not explosion-proof and can be dangerous when used in high performance applications at higher rpm. RAM billet steel flywheels are recommended as replacements for factory-cast flywheels in high performance and racing vehicles. Made in America and produced in-house, all RAM flywheels are computer balanced within a 1/2 oz., surface ground (which results an optimum mating surface), and are ready to run out of the box. They're better for launching heavier drag race cars and provide better drivability in street vehicles. SFI-approved, RAM billet steel flywheels are CNC-machined from certified materials. Order the model recommended for your year/make and engine application. Technical note: As they spin, heavy flywheels store more energy than lighter ones. Engine and gearing combinations that require more power or inertia to make the car launch without bogging the motor need heavier flywheels. However, heavier flywheels accelerate slower. Lighter flywheels create less inertia at launch, but accelerate quicker through the gears. When choosing a flywheel, you must consider the car's weight, operating rpm of the engine, and, most importantly, the gearing. Insufficient gearing will cause an engine with too light of a flywheel to "bog" on launch.

4.71 out of 5 stars ( 136 )

$249.00

—

$485.00

Billet Specialties Tru Trac Serpentine Systems with A/C

Billet Specialties Tru Trac serpentine systems with A/C feature easy, straightforward assembly—with no spacers or washers to fool with. The entire Tru Trac systems are designed to mount to the engine block to allow for any cylinder head/intake configuration. All hardware and fasteners are included in each kit to complete the install. Tru Trac serpentine systems with A/C include: * Powermaster 170 amp 1-wire alternator * Billet aluminum alternator fan and pulley * Edelbrock water pump * Billet aluminum water pump pulley * Billet aluminum bridge bracket * Patent-pending billet aluminum tensioner engineered specifically for each Tru Trac serpentine system * Billet aluminum tensioner pulley * Billet aluminum crankshaft pulley * Polished ARP 12-point stainless steel fasteners * Goodyear Gatorback 6-rib serpentine belt * Comprehensive installation manual * Polished Sanden SD-7 A/C compressor * Polished billet aluminum A/C compressor clutch cover * Polished billet aluminum A/C compressor manifold

4.6 out of 5 stars ( 20 )

$2,587.95

—

$2,934.95

Summit Racing™ Pro Billet Valve Spring Compressors

These Summit Racing™ Pro Billet valve spring compressors are designed with Finite Element Analysis to eliminate flex even with large 1.645 in. diameter triple valve springs. They feature two position handles on both sides; one for speed and one for leverage. The compressors will also accommodate electric power ratchets for quick work at professional machine shops. Summit Racing™ Pro Billet valve spring compressors feature: * Large 8.38 in. x 5.5 in. jaw capacity for big cylinder heads * Grip protector * Fully radiused and beveled surfaces * Non-marring puck * Knurled locking collar for quick setup * Modular spring cage, tapered for ease of lock insertion and bearing style end for friction reduction * Easily interchangeable to accommodate different cylinder heads and valve spring packs

4.2 out of 5 stars ( 5 )

$399.99

Summit Racing™ Billet Aluminum Alternator Brackets

Don't trust any old brackets to hold your alternator. Use our Summit Racing™ billet aluminum alternator brackets to keep your alternator firmly in place and your belts in line. They feature a stout billet aluminum construction and include all mounting hardware.

4.31 out of 5 stars ( 347 )

$50.99

—

$103.99

FTI Performance SRL Series Billet Lockup Torque Converters

FTI Performance SRL Series billet lockup torque converters feature a computer-designed, CNC-machined billet front cover and a billet lockup piston--making premature clutch wear a thing of the past. With custom stator designs and multiple blade angle pumps, stalls are available from 2,800-4,400 rpm. They are custom-built to your exact needs and driving style. With furnace-brazed and heli-welded fins, severe-duty sprague, and anti-ballooning flanged impeller hub, these torque converters are virtually indestructible.

4.06 out of 5 stars ( 18 )

$989.00

—

$1,895.00

AED Billet HO-Series Carburetors

AED Billet HO-Series carburetors are designed for single 4-barrel normally aspirated engines with the Pro-Street and bracket racer in mind. They feature a clean idle, crisp throttle response, and killer acceleration. These carbs are available in different double-pumper sizes and have been run, adjusted, and tuned on a test engine before shipment to ensure the utmost quality. Get the performance you want for the street and track when you order the AED Billet HO-Series carburetors best suited for your build.

4.71 out of 5 stars ( 21 )

$664.95

—

$739.95

On Sale

MSD Pro-Billet Locked-Out Distributors

MSD Pro-Billet locked-out distributors are built from strong billet aluminum for engines that run locked-out timing or an MSD timing computer. With no advance assembly, the rotor plate is welded directly to the oversized shaft. A sealed ball bearing guides the top of the shaft, while an extra-long sintered bushing stabilizes the lower portion. This extra support ensures stable and accurate timing signals throughout your engine's entire rpm range. Trigger signals are produced via a high-output magnetic pickup. This pickup is extremely accurate and never requires adjustment. A precision-manufactured reluctor is responsible for triggering the pickup. Since these distributors are designed primarily for race engines, an oversized (+.006 in.) bronze gear is installed, along with an adjustable slip collar for modified blocks, heads, or intake manifolds.

4.63 out of 5 stars ( 32 )

$479.95

—

$511.95

$430.95

—

$459.95

Summit Racing™ Digital RTR Plus Billet Distributors

We've taken our original Ready-to-Run billet distributors and upped the ante with our Summit Racing™ Digital RTR (Ready-to-Run) Plus billet distributors. They now feature a digital module with a 7.5 amp rated dwell control circuit for maximum energy output. They deliver 400 volts and 125mJ of spark energy to the coil and upwards of 50,000 volts from the coil to the spark plugs. We've also added a single-stage rev limiter with a simple "tap to ground" process of the tachometer lead attached to the module to set the limiter. The tachometer dual purpose lead also produces a 25 percent duty cycle, square wave signal, so it can be used with multifunction tachometers and most popular aftermarket EFI systems. Another bonus feature of our digital technology is a fully automatic start retard. This built-in feature provides 4 degrees of timing retard during cranking and is fully dialed out by 300 rpm. This gives you easier and quicker hot restarts while lowering the initial start load on the starter and electrical system. With all these upgraded features, you're assured of peak output throughout all RPM ranges, quicker hot starts, EFI capability and the reliability of digital technology. The distributors still have the same lightweight, forged, precision CNC-machined aluminum housing for strength and stability; polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm; and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. All distributors come with a high-quality, 30 percent glass-filled PBT cap and rotor with brass terminals and contacts. An ignition box is not required for use with Summit Racing™ Digital RTR Plus billet distributors except when used with an aftermarket EFI system. Select the model recommended for your car, truck, or van.

4.29 out of 5 stars ( 7 )

$349.99

—

$389.99

Billet Specialties Diecast Aluminum Valve Covers

Dress up your engine with a set of diecast aluminum valve covers from Billet Specialties. They're made from quality diecast aluminum that is polished or black powdercoated to the highest standards, and each design is CNC-machined in-house. The covers feature thick, precision-cut flanges to prevent unwanted oil leaks and warping. They are available in tall or short styles and come in your choice of a plain finish or a variety of engravings. Their 1.250 in. holes fit most breathers and PCV valves for an easy installation.

4.51 out of 5 stars ( 302 )

$136.94

—

$368.95

BluePrint Engines Pro Billet Ready to Run Distributors

BluePrint Engines Pro Billet ready-to-run distributors deliver reliable spark throughout the RPM range, so they'll deliver the performance you need, no matter what you drive—race car, street machine, or hauler. The economical distributors have high-dollar features that outperform the competition, like a lightweight billet aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black male/HEI cap and vacuum/mechanical advance. An ignition box is not required for use (except in some applications when used with an aftermarket EFI system). The distributors are available with or without mechanical tach drive. Additional details: Computer-controlled compatible: No Trigger style: Magnetic Advance type: Vacuum and mechanical Mechanical tach drive: Some models only Slip collar: No Distributor gear material: Melonized steel Distributor gear rotation: Standard Housing finish: Natural Marine use: No

5.0 out of 5 stars ( 6 )

$225.99

—

$299.99

ICT Billet Air Conditioning Compressor Brackets

LS1 conversions are extremely popular for cars, trucks, and Jeeps. ICT Billet air conditioning compressor brackets are designed for setups without the stock LS A/C compressor. These brackets are milled from aerospace-grade billet aluminum for impressive strength and longevity. Units are available to be used with LS1 Camaro or truck crank pulleys. ICT Billet air conditioning compressor brackets will keep accessories safe and secure.

4.72 out of 5 stars ( 29 )

$99.99

—

$479.99

On Sale

Holley HP Billet Fuel Filters

Holley HP billet fuel filters are precision CNC-machined from 6061-T6 billet aluminum for maximum strength and durability. They feature a black bright dip anodized body and clear bright dip anodized ends for superior corrosion resistance and good looks. Holley HP billet fuel filters are available in a variety of configurations in 100 or 175 gph and 10, 40, and 100 micron ratings.

4.84 out of 5 stars ( 63 )

$127.95

—

$152.95

$99.91

—

$137.65

2,000+ Results Found For "Billet"