Free Shipping on Orders Over $125 at Summit Racing

On Sale

AEM Electronics High-Flow External Electric Fuel Pumps

AEM Electronics high-flow external electric fuel pumps are designed for high performance, naturally aspirated, and forced induction EFI. They deliver reliable service and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps. The pumps include a rubber sleeve, end caps, a pre-filter, hose, clamps, and flying lead. Select the model with the size, psi limit, and flow rate needed for your application.

3.97 out of 5 stars ( 35 )

$199.95

$179.95

On Sale

AEM Electronics High-Flow In-Tank Electric Fuel Pumps

These AEM Electronics high-flow in-tank electric fuel pumps are designed for high performance, naturally aspirated, and forced induction EFI. They deliver reliable performance and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps. The pumps include a rubber sleeve, end caps, a prefilter, hose, clamps, and flying lead.

4.49 out of 5 stars ( 53 )

$117.95

—

$172.95

$106.15

—

$155.65

On Sale

AEM Electronics Billet Adjustable Fuel Pressure Regulators

These billet aluminum AEM Electronics fuel pressure regulators can support engines of up to 1,000 hp. Featuring replaceable discharge ports to match your fuel pump output, they're adjustable from 20 psi up to the maximum pump capacity rating. AEM Electronics billet adjustable fuel pressure regulators are available in a variety of colors for a variety of applications.

3.8 out of 5 stars ( 15 )

$166.95

—

$230.95

$150.25

—

$206.95

Aeromotive VaporWorx Returnless CTS-V Pulse Width Modulation Kits

Aeromotive VaporWorx returnless PWM kits for CTS-V fuel pump modules have everything needed to provide a standalone, OE-type returnless fuel system with constant or manifold referenced fuel pressure. When used with GM CTS-V2 and compatible fuel pump modules, this system will provide constant pressure or any base pressure with a 1:1 manifold referenced (supplied MAP sensor based) fuel pressure—operating just like a mechanical fuel pressure regulator would with the ECM calibrated in the same manner. The simplicity of these kits comes with connecting the supplied standalone MAP sensor to the pressurized side of the intake manifold, just like connecting a boost gauge or manifold referenced fuel pressure regulator. For constant fuel pressure simply leave the MAP sensor portion of the kit disconnected. VaporWorx CTS-V controllers feature: * Everything needed electrically to drive the fuel pump module--no relays, external regulators, or return lines are required * Unmatched low fuel level capability * Up to a 2/3 reduction in power to the fuel module during idle and cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition * Billet aluminum VaporWorx MAP sensor bracket and 3bar pressure sensor

Not Yet Reviewed

$597.35

On Sale

AEM Electronics CD-7 Digital Racing Dash Displays

AEM Electronics CD-7 digital racing dash displays feature 7 in. full-color digital screens that are super bright, high contrast, and with sunlight-readable displays. To ensure visibility at all times, they also have integrated glare diffusers and shade hoods to overcome the brightest daylight conditions. The CD-7s are designed to accept channels from CAN bus connections—and two CAN bus channels are included so that they can receive and collect data from AEMnet-enabled devices. Seven ultra-bright LEDs span the top of the display housing for rpm and shift light indication. You can program them to ascend in specific increments based on rpm range, and flash when it's time to shift. Brightness is also programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting—even with driving gloves on. These button functions are duplicated on the rear connector, allowing you to mount remote buttons on the steering wheel, if desired. Two additional programmable LEDs are located above the toggle buttons on the sides of the housing. AEM offers the CD-7 as "display only" (non-logging) or with built-in logger (CD-7L). The units are available in either a cast aluminum or carbon fiber composite housing—with sealed connectors on the rear and anti-vibration mounts.

3.0 out of 5 stars ( 2 )

$1,749.95

—

$2,249.95

$1,573.95

—

$2,023.95

On Sale

AEM Electronics CD-5 Carbon Digital Racing Dash Displays

AEM CD-5 Carbon digital racing dash displays are the lightest, brightest, ultimate track day digital dashboard displays that play well with others! The CD-5 units accept channels from two separate user programmable CAN bus connections—works with AEMnet enabled devices and non-AEM third party devices side-by-side. More key features and benefits: * Full-color, 5 in. screen * Direct sunlight readable (1000cd/m2 brightness and anti-glare filter) * Seven LED rpm/shift light indicators on top of the housing are programmable and dimmable * Layout files interchangeable with all versions of the CD-7 * Wiring interface/harness is identical to the CD-7 * Rugged, lightweight flow-molded carbon fiber composite enclosure * Two additional programmable LEDs are located above toggle buttons on the top of the housing on either side of the integrated LED shift lights * IP66 water resistance allows for operation in boats and motorcycles without worry * Seven programmable pages, including four main pages, alarm, on-change and start-up pages * Dedicated alarm page quickly identifies problems, and is programmable in almost any language (user defined) * Unique On-Change page can be used to identify map switching for boost, traction, lap times, etc. * Convert CAN bus channel values to user-defined text in multiple languages * Available with or without 200Mb internal logging (up to 1,000Hz/channel) * Available with or without on-board GPS receiver and antenna * Use included page layouts and input your channels and text, or create your own from scratch

Not Yet Reviewed

$1,749.95

$1,573.95

Radium Engineering Fuel Pump Hangers

Radium Engineering fuel pump hangers permit the use of one, two, or three aftermarket pumps in the stock MK4 Toyota Supra (JZA80) fuel tank. Features include: * Drop-in OEM replacement * 8 AN male pump outlet * 6 AN male return inlet * Fuel starvation protection * High current electrical hardware * Compatible with various pumps (Walbro, AEM, etc.) * Anodized aluminum construction To simplifying aftermarket -AN hose plumbing, the 10 AN ORB threaded feed port features a low-profile 8 AN male fitting, and the 8 AN ORB threaded return port features a low-profile 6 AN male fitting. To reconnect the OEM return and vent hoses, 8.5mm barb fittings are also included. No permanent modification to the OEM fuel tank access cover is required. The custom designed stainless electrical studs easily handle the high current demand that compact bulkhead connectors lack. These serviceable connections are properly sealed and impervious to all standard and exotic fuels. The low-profile design keeps all wiring tucked nicely underneath the OEM fuel tank cover using the provided foam insulation. Nonconductive acorn nuts are provided to prevent any accidental short circuits. The high quality in-tank wiring is insulated with chemically resistant ETFE. Electrical hardware is included for the fuel pump(s), OEM level sender, and OEM temperature sensor. One issue with all Supra fuel pump hangers is the lack of fuel starvation protection. In these kits, the flow from the FPR return line powers a Radium jet pump. Using a venturi-effect, this "mechanical" pump draws fuel from outside the sub-tank and distributes it directly to the pump inlets.

5.0 out of 5 stars ( 3 )

$218.45

—

$617.45

On Sale

AEM Electronics Pre-Filters

AEM Electronics pre-filters are the first line of protection against fuel contamination. Offered as the correct replacement filters for their line of high-flow in-tank fuel pumps, AEM pre-filter kits will fit and perform just like the originals they are replacing. Choose the one designed for your AEM fuel pump.

Not Yet Reviewed

$12.74

—

$24.35

$11.47

—

$21.92

On Sale

AEM Electronics EFI Fuel Pulse Dampers

Fuel pulse dampers, or pulsation dampers, act in tandem with the fuel pressure regulator to ensure stable and consistent fuel delivery to the engine. They do this by smoothing out the pressure fluctuations, or pulsations, caused by the injectors opening and closing, as well as the fuel pump operating. AEM Electronics fuel pulse dampers feature billet aluminum construction with an anodized finish and are ideal for applications with large fuel injectors and high-volume fuel pumps. They are compatible with any fuel and available as a direct-mount or in-line style with a standard or extended psi range. Select the best fit for your fuel system.

5.0 out of 5 stars ( 1 )

$105.95

—

$114.95

$95.35

—

$103.45

9 Results Found For "AEM fuel pump"