Availability
Showing In Stock Items. Show All 173 Items.
FiTech Go Shift transmission controllers are standalone electronic transmission control kits. If you plan on upgrading your transmission and you're having trouble with the wiring, back up lights, or shift points, the new Go Shift system is for you. Now you can have the luxury of a modern transmission for better response, better fuel economy, and overall reliability thanks to this system.
( 10 )
$599.00
These Chevrolet Performance automatic transmission controllers include the wiring harness, controller, software, and laptop hookup. They are designed to allow for the use of electronically controlled transmissions in early model vehicles. Chevrolet Performance automatic transmission controllers are fully programmable for upshift, downshift, part throttle and wide-open shifts, and shift firmness. They come preprogrammed--just enter your rear tire diameter and rear axle ratio and go, or create your own custom shift characteristics. Chevrolet Performance automatic transmission controllers were originally developed by GM Racing for off-road truck racing. They have the ability to record and graph drag racing data like time, speed, shift point, engine rpm, and more.
( 1 )
$1,812.27
Our Summit Racing automatic transmission controllers brings you the performance of a modern transmission with improved response, better fuel economy, and increased reliability. They have the ability to control shift points, shift firmness, downshifts, and all other features involved when controlling the transmission. Our transmission controllers include a touch screen hand-held controller for easy setup, and can be used to monitor the transmission in real time. They come with everything you need to connect and control your GM 4L60/65/80/85E or Ford AODE (92-97) transmissions.
( 1 )
$569.99
On Sale
The Holley Sniper Transmission Controller (STC) is designed for common GM and Ford electronic 4-speed automatic transmissions. Three part numbers cover a complete range of applications—all Sniper EFI systems, Sniper 2 EFI-specific (M8 CAN connection), or a full standalone unit. The Sniper specific applications connect to your Sniper EFI system via CAN bus and are programmed through the existing Sniper 3.5 in. touch screen. No programming is available with PC computer software; however, the transmission functions can be data-logged and reviewed with Sniper PC software. The Standalone version includes a dedicated 3.5 in. touch screen and is primarily intended for carbureted engine combinations. GM and Ford 4-speed electronic overdrive transmissions are simple in operation. They have four speeds, with the top gear being an overdrive; and all have a lockup torque converter that eliminates any slippage when the lockup is applied. With a stock torque converter, the lockup should only be applied under light throttle conditions or excessive wear will occur. Upshifts, downshifts, and torque converter lockup are based on vehicle speed and throttle position (or optionally the MAP sensor) and are adjustable with the 3.5 in. touch screen. P/N 551-100: Replacement controller unit only P/N 551-101: Controller unit and power harness only P/N 551-102: Standalone kit for carbureted applications (includes power harness and hand-held programmer) P/N 551-103: Controller unit and power harness for use with Sniper 2 EFI systems Holley Sniper Transmission Controller features: * Adds electronic transmission control functionality to a Sniper 2 * Controls conventional electronic 4-speed transmission applications. GM 4L60/70/80E and Ford AODE and 4R70W - transmission specific harnesses sold separately: -- 558-405 – GM 4L60/70/80E -- 558-455 – 2009+ GM 4L60E -- 558-470 – 1998+ Ford 4R70W/4R75W -- 558-471 – 1992-1997 Ford AODE/4R70W * Tuning is performed through the 3.5 in. touch screen LCD (included with the Standalone version). Future compatibility will include 5 in. display and Bluetooth module * Tune upshifts, downshifts and WOT shift points * Full programmability of torque converter lockup * Full tuning of transmission line pressure (shift firmness) * Controls and layouts interface mirror Dominator and Terminator X MAX ECUs (except no paddle shift) * A MAP sensor is needed if using MAP for line pressure, which is usually only done with forced induction applications
( 1 )
$599.95
—
$728.95
$538.95
—
$655.95
On Sale
Holley Sniper offers transmission-specific controller harnesses for a variety of GM and Ford automatic transmission models. The plug-and-play harnesses are pre-terminated with j4 connectors. Order the harness recommended for your EFI application.
Not Yet Reviewed
$299.95
$269.95
DIYAutoTune MicroSquirt CAN transmission controllers with sub-harness seamlessly control your transmission. They provide a simple, plug-and-play integration with MS3-Pro, and directly mates with their LSx drop-on harnesses. They are available with a 4L80E or 4L60E sub-harness. Included with your DIYAutoTune MicroSquirt controllers: * 6-pin black connector for power, ground, and CAN bus * 8-pin gray connector for additional inputs * 18 crimp pins for the above connectors Note: * Harness for GM 4L60E transmissions with or without the LUF (lock up feel) control solenoid. You can also wire the harness to communicate with an MS2, another MicroSquirt EMS, MS3-Pro, or MS3 over the CAN bus. * Harness for GM 4L80E transmission includes wiring for the input shaft speed sensor, and can be used as a standalone transmission control solution with minimal wiring involved. But was designed to be a full plug-and-play, zero wiring solution with DIY 24x and 58x harnesses.
( 5 )
$499.99
Edelbrock TC transmission controllers are offered as a standalone system to work with Pro Flo 4, most aftermarket fuel injection systems and carbureted applications utilizing a TPS sensor. Features: * Transmission control over shift points, firmness, speed, torque converter lock up, shift table, speedometer calibration and line pressure * Edelbrock TC Tuner calibration app (available for both Android and Apple devices) and optional 7 in. touchscreen Bluetooth tablet for setup, adjustment and visual display * Easy install with compact housing and clean-look wiring harness * Includes base calibrations for a plug-and-play setup * Compatible with carbureted applications utilizing a standalone throttle position sensor * CAN bus communication for functionality with all Pro-Flo 4 systems and most aftermarket EFI systems * Also, allows you to change the final drive ratio, tire diameter, and transfer case ratio
( 4 )
$864.95
—
$910.95
Haltech Nexus Ti4L transmission interface kits allow easy control of GM's popular 4L series of automatic transmissions. Designed as an add-on transmission controller expansion module for the NEXUS ECU and VCU range, the Ti4L will be programmed via the HalTech NSP software, or Rebel LS users will be able to follow the simple setup wizard in the Haltech Connect app. Easy set-up is not the only feature! They have also developed smart long-term learning strategies via closed-loop line pressure control, which means shifting gets better the more you drive. Features include: * Plug-and-play with Nexus Rebel LS terminated harnesses * Easy setup wizard for Rebel LS ECU * Programming and setup via NSP Software or Haltech Connect app * Long-term learning strategies via closed-loop line pressure control * Haltech 500 psi pressure sensor included Compatibilty: * Haltech Nexus Series ECUs and VCUs, including Rebel LS * GM 4L60E * GM 4L65E * GM 4L70E (non-4x4 2006-08 only) * GM 4L80E * GM 4L85E nNon 4x4 1994 and newer only) Note: Does not support Haltech Elite/Platinum/Legacy ECUs
Not Yet Reviewed
$457.99
Chevrolet Performance SuperMatic transmission control systems make it easy to connect and cruise. These controller kits complement the ready-to-run convenience of your crate engine with plug-and-play operation. There is no additional wiring, and the leads are clearly marked to link up with the engine control harness. SuperMatic control systems are pre-programmed to provide full-function transmission operation after completing the connections. No laptop programming is required. Chevrolet revised the systems with a more compact design for a headache-free installation with your carbureted small block, big block, or ram jet engine—and they're compatible with OBDII code readers. Get in gear with the simplicity and improved shift performance offered by Chevrolet Performance SuperMatic transmission control systems.
Not Yet Reviewed
$2,120.96
GearStar offers Quick4 Gen 2 standalone automatic transmission controllers for a variety of applications. They are required for any electronically controlled transmission. Each package contains the computer, wiring harness, and custom wire loom; comes preloaded with a tune designed for specific transmissions; and will include a throttle position sensor kit. --- Models are currently available to support these popular transmissions: * GM 4L60E, 4L65E, 4L70E (2008 and earlier) 13 pin main harness connector * GM 4L80E and 4L85E * Ford AOD-E, 4R70W 1998-2003 wiring harness with the 12 pin MLPS switch * Ford E4OD and 4R100 late solenoid connector, with 11 or 12 pin MLPS switch The Quick4 is a powerful, fully featured, easy-to-use transmission control system. It enables the use of modern, electronic 4-speed transmissions on a wide variety of vehicles that lack OEM capabilities, such as classic cars, trucks, or motor homes. It can also be used to enhance a modern vehicle's performance by taking over control from the OEM computer, allowing the user to directly adjust the shift points, firmness, torque converter engagement, and much more. The Quick4 does not require the use of a laptop for tuning. Tuning can be done through the user interface with a soft touch dial and LCD screen. There is free downloadable tuning software to fine-tune your transmission with a Windows-based PC.
Not Yet Reviewed
$850.00
On Sale
Hoop up your Atomic TCU with MSD Atomic transmission control module harnesses. They are designed to fit your specific transmission model and have the proper wiring connector for a direct fit.
( 7 )
$274.95
$247.45
On Sale
MSD Atomic transmission control modules are designed to adjust the operating parameters of later model electronically controlled 4-speed automatic overdrive transmissions. They're simple to configure with the supplied hand-held monitor--no PC required. You now have access to adjust shift points, adjust torque converter clutch behavior, select different levels of shift firmness, select between auto-shift and manual shift mode, and activate dyno mode to deliver repeatable chassis dyno results. The included hand-held monitor connects to them and can be left in place as a dashboard to monitor the transmission in real time, or can be disconnected when the configuration is complete. Once installed, these modules need only a few basic parameters to complete the initial setup. First, select the type of transmission you are using--all supported transmission types are listed in the menu. Other required fields include the number of engine cylinders, rear-end gear ratio, and tire height. Once this has been completed, you can now start and drive the vehicle, while taking advantage of the advanced setup menu items to dial-in the transmission to your liking. You can feel the results in real-time as a passenger manipulates the parameters and monitors the real-time data. Data available for viewing includes engine speed, vehicle speed, throttle position, transmission fluid temperature, shifter position, and commanded gear. Best of all, the MSD Atomic transmission control modules are available as completely stand-alone units or Brainwave-compatible for the Atomic EFI systems. A transmission controller harness is sold separately.
( 19 )
$899.95
$349.95
—
$808.95
CORE ECU is HP Tuners debut standalone engine management solution, delivering superior control over your powerplant with many features that go beyond the constraints of factory ECUs. HP Tuners offers several wiring harness options to mate with their CORE ECU. Their CORE transmission control harnesses are 3 ft. in length and terminated with one or two connectors, along with labeled open leads. Choose the one needed for your build.
Not Yet Reviewed
$159.99
—
$259.99
TCI automatic transmission controller components are designed to keep your TCI EZ-TCU transmission controller in perfect working order. The controller allows for maximum electronic control over shift points, shift firmness, and shift speed and is fully configured and ready to run right out of the box with no tuning necessary. The unit is also optionally fully programmable based on load, speed and RPM. If you ever have the want or need to get any additional components or replacement components for your transmission controller TCI has the automatic transmission controller components you need.
( 11 )
$26.95
—
$422.95
On Sale
Get that stout performance you've always craved out of your automatic transmission with the installation of a B&M remote throttle position sensor! Designed for use with carbureted engines, B&M throttle position sensors are for use with B&M's automatic transmission controllers (sold separately). B&M throttle position sensors feature a simple three-wire design, making it easier to install. The adjustable cable allows for various mounting locations on your engine, and the supplied bracket provides a place to mount the throttle cable, as well as providing a more professional looking appearance.
( 2 )
$326.95
$294.25
These Lokar indicator control modules are designed to control the LED indicator display. They are made of billet aluminum and include all necessary mounting hardware. They are available for a dash mount or shifter boot mount, and the LED display is sold separately.
( 8 )
$277.95
Get ready to "Push the Boundaries" with HP Tuners CORE standalone engine control units! Created and designed for gearheads and craftsmen who need the utmost level of customization, CORE ECUs deliver superior control over your powerplant with many features that go beyond the constraints of factory ECUs. They provide all the necessary sensor interfaces, ignition drivers, injection drivers, and output drive stages required for total engine control. Bringing the CORE ECU to life is HP Tuners' VCM Live software, combining the diagnostics and calibration elements into a single, user-friendly interface. HP Tuners CORE ECUs are designed for all levels of LS swaps and high-performance motorsports builds. Currently CORE supports Gen 3 and Gen 4 LS engines with a 24x crank and 1x cam trigger along with 58x crank and 4x cam triggers. Drag, circuit, off-road racing; drifting, rally, or restomods, no matter what your high performance application, HP Tuners CORE ECU will provide everything you need for total control, performance, and ease of use. Order yours today. Key features: * Up to 16 injector control (fuel) and 8 coil packs (spark) * Sequential injection * Flex Fuel support * Dual throttle body capability * Two built-in Lambda controllers * Internal datalogging--up to 150 channels at 1kHz * 3 CAN bus networks (2 CAN and 1 HPT net) and ethernet connectivity * Turbo boost and anti-lag control * Single-stage On/Off and progressive nitrous control * Launch control * Map switching * A/C control, alternator control, etc.
Not Yet Reviewed
$1,999.99
TCI EZ-TCU main harnesses are the replacements you need to keep your transmission control unit connected to performance. These are identical to the originals that came with your units, and they offer the right fit and function for your controller. Whether you need them because of damage, loss, or the desire to have a spare on hand, TCI EZ-TCU main harnesses are available as replacements so that you can continue maximum control over shift points, shift firmness, and shift speed.
Not Yet Reviewed
$225.95
These Standard Motor automatic transmission control solenoids are designed to replace faulty factory units to keep your transmission shifting smoothly. They meet or exceed OEM specifications and are available for a variety of applications.
( 14 )
$11.99
ATP automatic transmission control solenoids are designed to replace faulty factory units and keep your transmission shifting smoothly. They're available in a variety of configurations for dozens of transmission types—on thousands of vehicle applications. These replacement solenoids meet or exceed OEM specifications.
( 1 )
$24.99
—
$101.99
TransGo automatic transmission shift kits include the needed items to restore proper function to your valve body with much improved drivability and durability. A wonderful addition to your OEM classic vehicle. Features and benefits: * Raises overall line pressure * Calibration for a higher speed manual low * Crisp shift performance and more durability
( 5 )
$230.14
Summit Bucks
ACDelco automatic transmission shift solenoid valves are GM-recommended replacement components. Keeping your transmission shifting and operating efficiently is crucial to the overall life of vehicle. These original equipment solenoids will provide the same performance, durability, and service life you can expect from a General Motors direct part.
( 5 )
$25.99
Summit Bucks
Sonnax Sure Cure automatic transmission rebuild kits are a comprehensive reconditioning package—featuring the best Sonnax products developed to help mechanics restore and enhance transmission performance. Sure Cure components are the same Sonnax parts sold individually to resolve common valve body complaints, as well as other transmission problems. The high-quality components in each Sure Cure kit will repair worn areas and protect the transmission against future damage. Plus, each kit comes with an easy-to-read, step-by-step installation guide that covers inspection and repair of the most critical areas of the valve body. Additional features and benefits: * Restore shift quality and reduce comebacks * Repairs biggest trouble areas to reduce comebacks * Includes step-by-step instructions for comprehensive valve/pump body restoration Kits Include: * Shims (2) endplay * Pump slide pivot pin * Throttle valve plunger valve kit * Shortened TV link * TV cable corrector kit * Seals D-ring servo * 1-2 or 3-4 accumulator spring * Servo release check valve kit * Reverse boost valve kit * Oversized pressure regulator valve * Pinless 1-2 or 3-4 accumulator piston kit * TV boost valve kit * Bushing pump * Bushing rear stator support * Checkballs
( 6 )
$100.75
—
$176.90
GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L80E Level 4 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 800 hp * Up to 700 lb.-ft. of torque * Stall: 2,800 to 3,400 * Custom-built, custom-stalled 10 in. billet racing lock-up converter * Master overhaul kit with Alto hardened steels * Raybestos Stage 1 frictions * TransGo reprogramming kit * Filter * Torrington bearing kit * Bushing kit * Thrust washer kit * Internal wiring harness * New manifold pressure switch * New EPC solenoid * New PWM solenoid * New input and output speed sensors * New 1-2 and 3-4 shift solenoids * Expanded capacity forward clutch drum * Extra-capacity 2nd gear clutch assembly * Expanded capacity 3rd clutch drum * Heat-treated input shaft * 300M main shaft * 300M forward clutch hub * Updated molded steel direct clutch piston * Updated reverse band * New low roller assembly * Wide kickdown band with new apply piston * Heavy-duty intermediate sprag * Updated boost valve * Updated TCC regulator valve * Blueprinted pump and valve body * Transmission mount * New OEM steel pan
( 1 )
$7,845.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
