Availability
Showing In Stock Items. Show All 141 Items.
BluePrint Engines dual plane Vortec intake manifolds are perfect to top any SBC ranging from 350 to 400 c.i.d. These cast aluminum performance replacements are pressure-tested for leaks—and are capable of supporting over 500 hp. They're a great match for BluePrint H8002K and HP8103 headed engines, or iron Vortec headed engines. Gaskets and hardware are included. Additional details (P/N MLL-BPP350VINT): * Engine block style: SBC Stock/OEM standard deck * Cylinder head style: Vortec * Carburetor mounting: 4-barrel square bore * Intake style: Dual plane * Basic operating RPM range: Idle - 6,200 * Intake manifold height: 4.595 in. * Intake finish: Natural * Intake material: Aluminum * Features two 1/2 in. NPT plugs on top of the front water crossover, and one 3/8 in. NPT plug facing forward, perpendicular to the thermostat. * The rear most 1/2 in. NPT pipe plug on the rear intake runner is for brake booster. This is NOT a water port. * NOTES: This intake manifold features the Vortec (vertical intake bolt) Pattern. This is the production intake manifold used on BluePrint SBC engines 400 c.i.d. and smaller. May not be compatible with OEM chokes or OEM accessory mounting brackets.
( 4 )
$249.99
Dual-plane Performer Vortec intake manifolds are based on Edelbrock's popular Performer Series. They're intended for small block Chevy engines fitted with either 1996 and later cast iron Vortec heads or Edelbrock E-Tec aluminum heads. They are great for street rods, engine swaps, or industrial applications. They're set up for either square-bore or spread-bore carburetors and produce power from idle to 5,500 rpm. They have no provision for an exhaust-heated choke.
( 32 )
$339.95
—
$540.95
Edelbrock Performer RPM Vortec intake manifolds are based on their highly successful Performer family. They're designed for street rods, marine applications, and a host of engine swaps using small block Chevy V8s with 1996 and later Vortec (L31) cast iron heads or Edelbrock's E-Tec aluminum heads. They accept single square bore carbs only and have an external water bypass boss machined into the front of the water crossover for use on 1996 and later Vortec production engines. Their 1,500 rpm to 5,500 rpm power band makes them an excellent choice for a wide range of setups.
( 21 )
$389.95
—
$617.95
These Vortec manifolds with TBI from Chevrolet Performance are designed for maximum horsepower with throttle body fuel injection and EGR usage. These manifolds will fit all Vortec-designed cylinder heads.
( 17 )
$694.28
These Cyclone intake manifolds from Professional Products are designed to fit engine swaps using the 1996 and later Vortec cast iron heads or the Edelbrock E-Tec aluminum heads. These manifolds can be used on any Chevy V8 engine utilizing the late Vortec head. They have a provision for an external water bypass. These Cyclone Vortec intake manifolds feature 4-corner water outlets, dual distributor hold-downs, a square bore carb adapter and gasket, and will work with late model style water neck, alternator, HEI, and air conditioning brackets.
( 19 )
$173.99
Single plane Chevrolet Performance Parts' Eliminator Vortec intake manifolds mount a single high-flow 4-barrel with a runner and plenum configuration, fine-tuned to produce maximum power and torque from Vortec heads. An open "air-gap" space under the runners is engineered to reduce heat transfer to the intake charge, which helps to further maximize power.
( 2 )
$531.96
Top Street Performance Vortec intake manifolds are dual plane, high performance units ideal for street performance applications with a design that improves throttle response, as well as power and torque over a wide rpm range--idle to 5,500. They are cast from lightweight aluminum and feature a low-profile for ideal hood clearance. The TSP Vortec manifolds have additional provisions, including dual distributor hold-downs, 4-corner water ports, and a choke block-off kit. They are set up for spread bore carbs and include an adapter plate and gasket for use with square bore types. Note: As Vortec blocks do not have a water bypass, the manifolds are equipped with a provision to connect to a stock water pump using a 5/8 in. heater hose.
( 1 )
$244.44
These Professional Products CrossWind Vortec manifolds are intended for 1995 and earlier blocks using the 1996 and later Vortec (Gen 1+) cylinder heads or the Edelbrock E-Tec heads. They can also be used on 1996 and later Vortec engines, but require running a short length of heater hose from a pipe tapped hole in the front of the manifold to the 5/8 in. hose nipple on the passenger's side of the water pump. The 1996 and later Vortec blocks do not have a water bypass in the block, and this minor modification takes care of that problem. These are one of Professional Products' most popular street manifolds.
( 12 )
$219.99
—
$234.99
These Edelbrock Performer Vortec intake manifold and carburetor kits are intended for small block Chevy engines fitted with either 1996 and later cast iron Vortec heads or Edelbrock's E-Tec aluminum heads. Performer Vortecs are great for street rods, engine swaps, or industrial applications. They're set up for either square-bore or spread-bore carburetors and produce power from idle to 5,500 rpm. The kits include a 650 cfm Thunder Series AVS carburetor with electric choke for easy drivability.
( 1 )
$993.95
These Chevrolet Performance Vortec intake manifold bolts will secure your intake manifold properly to your Vortec cylinder heads. They have the factory thread sealer already on the threads, and use a standard hex head for easy installation and removal. Chevrolet Performance makes installing your Vortec manifold simple with the use of their direct-fit intake manifold bolts.
( 3 )
$6.99
Tuned Port Injected (TPI) engines with Vortec heads are a reality, thanks to the Chevrolet Performance team. Their engine dynometer tests have shown a 40 hp gain with the new Vortec TPI base plate and stock Vortec heads versus the stock L98 engine. The Vortec TPI base manifold was designed from the original GM TPI intake to be a universal fit for Chevrolet/Pontiac cars (1985-92) that were equipped with factory Tuned Port Fuel Injection—and the cylinder heads have been replaced with the new style raised-port improved flowing Vortec heads from Chevrolet Performance. * Performance gains: In-house testing has proven a gain of 40 hp over a stock L98 engine. The larger runners of the TPI Vortec baseplate, combined with the excellent flow characteristics of the GM Vortec heads, produced 300 hp on an otherwise stock L98 engine. Other modifications such as camshafts, rocker arms, and injectors produced as much as 375 hp with the stock computer and throttle body. Testing was performed with a mass airflow (MAF) sensor system. * Minor modifications required: TPI Vortec baseplates are a universal design that we patterned after the original GM TPI baseplate. Because it is a universal design, you should first test fit all components that bolt directly to the intake and make any required modification prior to final installation. Some modifications may be required of the external components related to the intake and EGR systems.
Not Yet Reviewed
$449.95
Chevrolet Performance Vortec dual plane intake manifolds are designed for maximum horsepower and a broad torque curve to give you great performance. These high-rise intakes fit all 283 to 400 c.i.d. small block Chevrolet engines using late model Vortec heads. The lightweight aluminum manifolds accept Holley square bore carburetors and include an externally plumbed hot water crossover passage.
( 5 )
$402.91
—
$672.73
These Vortec intake manifolds were designed for ultimate horsepower and torque when used with Vortec cylinder heads. These manifolds offer superior throttle response for street or racetrack use and will clear most stock hoods. Vortec aluminum manifolds will accept either Holley or Quadrajet carburetors and offer provisions for the EGR.
( 5 )
$525.18
Holley EFI intake manifolds feature port-matched upper and lower runners for reduced restrictions. Plus, the EGR passages have been relocated to the outside of the manifold to allow for the use of larger intake ports. The result is greater air capacity, which makes these manifolds the perfect choice for supercharged engines. They're available in a variety of styles and options; select the model designed for your vehicle and/or engine application.
( 6 )
$699.95
Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.
( 443 )
$453.95
—
$680.95
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 570 )
$423.95
Our Summit Racing™ Stage 1 intake manifolds are the perfect performance upgrades for your engine. The intake manifolds feature a high-flow runner design to deliver improved power from idle to 6,000 rpm. These cast-aluminum manifolds are pressure-tested for leaks. Chevrolet manifolds will clear HEI ignition systems.
( 231 )
$212.99
—
$251.99
Summit Racing™ Stage 3 dual-plane intake manifolds are based on our Stage 2 intakes, with the same high-rise design, long separated runners, and 1,500-6,500 rpm powerband. For even more power, we added an open area under the plenum, which provides airflow to keep the fuel/air charge cooler. These intakes are the perfect compliment to your street and strip performance upgrades. The cast-aluminum intakes are CNC-machined for a precise fit, and have a square bore flange and natural finish. Chevrolet intakes will clear HEI ignition systems.
( 70 )
$279.99
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
( 314 )
$359.95
—
$639.95
On Sale
Our Summit Racing™ cast aluminum intakes are the perfect performance upgrades for your engine. The dual plane carbureted manifolds feature a runner design to deliver improved power. They're available in a variety of sizes, RPM ranges, and finishes. Order the model recommended for your vehicle application.
( 50 )
$340.99
$240.99
Edelbrock Super Victor intake manifolds are arguably the most popular and flexible manifolds in racing today. You'll find these single-plane manifolds on oval tracks, in drag racing, and on NASCAR engines--anywhere that maximum horsepower and torque are needed. The extended, constant cross-sectional area of the runners produces more torque across the midrange--from 3,500 up to 8,500 rpm in most instances. So, they deliver great throttle response off of the corners in oval track racing and improved 60 ft. times in drag racing. Their direct "line-of-sight" flow path provides maximum flow and there's plenty of material for port matching. They're also ideal for alcohol use.
( 53 )
$497.95
—
$552.95
These Edelbrock Victor EFI intake manifolds make it simple to convert competition engines to electronic fuel injection. They have injector bosses precisely positioned and machined for excellent fuel spray patterns and maximum power. These manifolds require a universal 4-barrel throttle body, fuel rail set, fuel injectors, fuel pump, and regulator, which are each sold separately.
( 2 )
$648.95
Edelbrock Pro-Flo XT EFI intake manifolds combine a user-friendly design with the latest technology. They're manufactured from aluminum and are available in a natural, polished, or black powdercoat finish for ultimate protection. Pro-Flo XT EFI intakes feature eight equal-length tapered runners and a large plenum. The fuel-injected manifolds are designed to deliver maximum horsepower and a broad torque curve throughout the 1,500 to 7,000 rpm range. Choose the model designed for your vehicle and cylinder head style application.
( 15 )
$662.95
—
$752.95
On Sale
Weiand high-rise/dual-plane Speed Warrior intake manifolds feature long, separated runners for bottom-end and mid-range power, plus a special runner design and larger plenum to flow the air needed for high-rpm horsepower. They mount single, square-mount 4-barrel carburetors and make power from 1,500 to 6,700 rpm. That makes Weiand Speed Warrior intake manifolds the perfect choice for your street/strip vehicle. To make more power you have to get more air to your engine. Look to Weiand as your power source! Features include: * Permanent mold castings * Precision CNC-machined * Available with exhaust crossover for improved street drivability * Also available with isolated runners to reduce intake charge heating * Available finishes: as cast; polished; black ceramic coating; Everbright * Offered for standard small block Chevy heads, non-EGR 262 c.i.d. to 400 c.i.d. heads, and Vortec (L31) or non-Vortec heads
( 52 )
$299.95
$230.20
—
$460.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
