Availability
Showing In Stock Items. Show All 26 Items.
Howe introduced the first Steering Quickeners in 1986 and they've been a favorite of racers ever since. With a weight of only 3.04 lbs. and durable heat-treated internal gears and shafts, they can be used to either speed or slow the steering response in your race car. These units install easily anywhere on the steering shaft with a GM spline U-joint or coupler.
( 15 )
$126.99
—
$131.99
On Sale
Racing Automotive Group steering quickeners are the lightest and most compact units available. Their compact design offers more room in the driver's compartment which makes it easier to mount in confined spaces. These parts are used to modify the steering ratio of a factory-installed steering system, which in turn modifies the response time and overall handling of your vehicle. The steering quickeners are available in various lengths, with or without spline.
Not Yet Reviewed
$149.99
$134.99
On Sale
Direct upgrade for existing HyperSpark ignition box, Holley Sniper EFI HyperSpark 2 CD ignition boxes feature a smaller form factor and hotter spark. These low-profile boxes can fit nearly anywhere inside of your engine bay or cockpit. They have all the proven features of their predecessor in a smaller package, making it easier to mount, providing the cleanest installation possible. HyperSpark 2 ignition boxes pack up to 150 mJ of spark energy when used with the matching ignition coil, resulting in enough energy to safely fire your Sniper EFI engine combination. Features: * Plug-and-play with existing HyperSpark installations, or Sniper EFI HyperSpark main harnesses * Includes an ignition harness for fresh Sniper EFI Installs simply wanting to add timing control * New processor and board design provide a highly efficient ignition, minimal heat, and maximum spark energy with less current draw * High rpm operation and maximum output using the HyperSpark ignition coil * Powerful capacitive discharge of multiple sparks improves performance and ensures complete combustion * Consistently high-spark energy of 135 to 150 mJ for every firing, from idle to redline rpm * Operates on most 7 to 28 V electrical systems * Fully protected against an open coil, shorted coil, and open load * 1.47 lbs. lighter than an original HyperSpark ignition box * Quickens throttle response and improves starting * Tach Output to drive an external tachometer
( 2 )
$399.95
$359.95
On Sale
The new Ultra 6AL Series ignition boxes deliver full MSD power in a compact, lighter package! The Ultra 6AL Series continues to use a high-speed controller that can make extremely quick compensations to the output voltage, multiple spark series, timing and rpm limits, while maintaining precise timing and accurate rev limiting. The circuits and controller of the MSD have been thoroughly filtered to create protection against Electro Magnetic Interference (EMI). Ultra 6AL Series features a capacitive discharge ignition design. (The majority of stock ignition systems are inductive ignitions, in which the coil must store and step up the voltage to maximum strength in between each firing. At higher RPM, since there's less time to charge the coil to full capacity, the voltage falls short of reaching maximum energy—which results in a loss of power or top end miss.) MSD Ultra 6AL ignition box details: * High conversion efficiency ensures minimal heat generation and maximum spark energy output with less current draw from the battery * High RPM operation and maximum output using the Blaster HVC, PN 8252 or HVC II, PN 8253 * Powerful capacitive discharge of multiple sparks improves performance * Consistently high spark energy of 135mJ to 150mJ for every firing, from idle to redline RPM * Increase spark series duration lasts for 18 of crankshaft rotation * Easily installs on 4, 6, 8-cylinder engines with distributors * Operates on most 7 to 28 volt electrical systems * Connects to points, magnetic pickups, and hall/crank input distributors * Bluetooth connectivity to mobile app interface for settings and monitors * MSD CAN communication for easy connectivity to MSDView using a CAN MSD Hub and Power Grid USB or CAN-USB Bridge 89982 product * Fully protected against an open coil, shorted coil and open load * Compact design full MSD power * Quickens throttle response and improves starting * Tach Output * Launch, Burnout, and Step Retard activation inputs available. This ignition box has a built-in tri step RPM rev limit controlled by the mobile app * Mobile app available settings: Cylinder selection, Step retard value, Launch RPM value, Burnout RPM value, Max (Race) RPM Value, Start retard value * Programmable Step Retard: On Ramp time, Off Delay, Off Ramp Time, Engine RPM for activation * Programmable Start Retard: 0, 10, 20 degrees * Alerts and monitors available * High level of security connection from phone to ignition box (encryption), including sequence in push-button implementation * Maximum programmable retard of 30 degrees * Ignition boxes are available in red or black
( 9 )
$349.95
$314.95
On Sale
The new Ultra 6AL Plus ignition boxes deliver full MSD power in a compact, lighter package! The Ultra 6AL Series continues to use a high-speed controller that can make extremely quick compensations to the output voltage, multiple spark series, timing and rpm limits, while maintaining precise timing and accurate rev limiting. The circuits and controller of the MSD have been thoroughly filtered to create protection against Electro Magnetic Interference (EMI). Ultra 6AL Series features a capacitive discharge ignition design. (The majority of stock ignition systems are inductive ignitions, in which the coil must store and step up the voltage to maximum strength in between each firing. At higher RPM, since there's less time to charge the coil to full capacity, the voltage falls short of reaching maximum energy—which results in a loss of power or top end miss.) MSD Ultra 6AL Plus ignition box details: * High conversion efficiency ensures minimal heat generation and maximum spark energy output with less current draw from the battery * High RPM operation and maximum output using the Blaster HVC, PN 8252 or HVC II, PN 8253 * Powerful capacitive discharge of multiple sparks improves performance * Consistently high spark energy of 135mJ to 150mJ for every firing, from idle to redline RPM * Increase spark series duration lasts for 18 of crankshaft rotation * Easily installs on 4, 6, 8-cylinder engines with distributors * Operates on most 7 to 28 volt electrical systems * Connects to points, magnetic pickups, and hall/crank input distributors * Bluetooth connectivity to mobile app interface for settings and monitors * MSD CAN communication for easy connectivity to MSDView using a CAN MSD Hub and Power Grid USB or CAN-USB Bridge 89982 product * Straight USB port to easily connect to MSDView using a laptop * Fully protected against an open coil, shorted coil and open load * Compact design full MSD power * Quickens throttle response and improves starting * Tach Output * Launch, Burnout, and Step Retard activation inputs available. This ignition box has a built-in tri step RPM rev limit controlled by the mobile app * Mobile app available settings: Step retard value, Launch RPM value, Burnout RPM value, Max (Race) RPM Value * Programmable Step Retard: On Ramp time, Off Delay, Off Ramp Time, Engine RPM for activation * Programmable Start Retard through rotary switches: 0, 10, 20 degrees * Programmable cylinder selection through rotary switches: 4, 6, and 8 cylinders * Alerts and monitors available * High level of security connection from phone to Ignition box (encryption), including sequence in push button implementation * Maximum programmable retard of 35 degrees * Programmable timing curves in 2D plots or 3D tables (RPM vs Timing vs MAP Pressure); you can plot the 3-D graph and edit a table 20x20 either from mobile app (phone) or from MSDView (laptop) * Programmable Launch Timing (seconds vs degrees after launch wire activation) * MAP sensor interface up to 400 kPA (58 psi / 4 Bars) * Capable of programming cylinder selection and start retard without a computer or app for old school racers (like 6425 or 6428 box)
( 7 )
$467.95
$420.95
On Sale
MSD Ultra 6A Series ignition boxes continue to use a high-speed controller that can make extremely quick compensations to the output voltage, multiple spark series, timing and rpm limits—while maintaining precise timing and accurate rev limiting. The circuits and controller of the MSD have been thoroughly filtered to create protection against Electro Magnetic Interference (EMI). The Ultra 6A Series features a capacitive discharge ignition design. The majority of stock ignition systems are inductive ignitions. In an inductive ignition, the coil must store and step up the voltage to maximum strength in between each firing. At higher rpm, since there is less time to charge the coil to full capacity, the voltage falls short of reaching maximum energy—which results in a loss of power or top end miss. Product features: * Plug-and-play upgrade to current installations with a 6201, MSD 6A * New processor and board design provide a highly efficient ignition, minimal heat and max spark energy with less current draw * 60 percent smaller and 50 percent lighter than the MSD Digital 6A (688 grams vs 344 grams) * High-RPM operation and maximum output using the Blaster HVC, PN 8252 or HVC II, PN 8253 * Powerful capacitive discharge of multiple sparks improves performance, and ensure complete combustion * Consistently high spark energy of 135mJ to 150mJ for every firing, from idle to redline rpm * Easily installs on 4, 6, 8-cylinder engines with distributors * Operates on most 7 to 28 V electrical systems * Connects to points and magnetic pickups * Fully protected against an open coil, shorted coil and open load * Compact design; full MSD power * Quickens throttle response and improves starting * Tach output to drive an external tachometer
( 9 )
$326.95
$294.25
On Sale
For racers that need serious spark output, the MSD Ultra 7AL ignition boxes are the right choice. Offering industry-leading spark energy output in a compact and efficient package, the Ultra 7AL includes four step retards, three rev limits and two rpm-activated switch outputs. The Ultra 7AL also features two different power output settings that can be used for on-the-fly changes which are perfect for drag-and-drive applications. All features are adjusted using plug-in modules including the 3-step rev control and multi-step retard. The rev control gives you the ability to set one rev limit for the burnout, another for the staging rpm limit and a third for use top end engine protection in the event of driveline failure. For nitrous fans, there are four separate stages that can be activated independently yet add up together. Plus, there are two rpm activated switch outputs that can be used for air shifters, shift lights or other devices that require a perfectly timed ground trigger! For increased output and proven multi-spark power, use MSD Ultra 7AL ignition boxes. Ultra 7AL multiple spark ignition control features and benefits: * High-output continuously delivers high energy for maximum performance even under extreme race or street conditions * Lighter, and over 50 percent smaller than the 7AL-3 model * Two different power output settings for on-the-fly changes for drag-or-drive situations * Twice the spark output of the 7AL-3, (330mJ vs 160mJ) * Adjustments made using plug-in modules for the 3-step rev control and multi-step retard * Rev control can set one rev limit for burnout, another for the staging rpm limit, and a third for high rpm engine protection * Quickens throttle response * Adjustable start retard can control the amount of retard pulled out during engine cranking * Adjustable switch for start retard settings eliminates the need for additional external wiring to the starter solenoid * Two rpm activated switch outputs (compared to the 7AL's single RAS output) * Two multi-colored status LEDs Emissions Note: This part is only legal for sale and use on uncontrolled (non-emissions controlled) vehicles or on vehicles used solely for the purposes of closed competition racing.
Not Yet Reviewed
$799.95
$718.95
On Sale
You definitely know when your power steering pump fails--turning the wheel becomes a muscle-building chore. Racing Automotive Group power steering pumps offer a solution. Designed for use with fast ratio steering boxes and steering quickeners, they feature a 1,300 psi operating pressure and a lightweight aluminum construction. Racing Automotive Group power steering pumps are available individually (pump only), with a pulley (V-belt or serpentine), or with pulley and durable plastic reservoir.
( 5 )
$189.99
—
$309.99
$170.99
—
$278.99
On Sale
You definitely know when your power steering pump fails--turning the wheel becomes a muscle-building chore. Racing Automotive Group power steering pump kits offer a solution. Designed for use with steering quickeners, the pumps produce up to a 1,300 psi at the recommended pump rpm range, feature lightweight aluminum construction, and are packaged with either a V-belt or serpentine pulley kit, deluxe head mounting kits, and aluminum remote reservoir. Select the kit needed for your vehicle. Aluminum P/S pump features: * Includes black anodize aluminum pulley -- 6-groove serpentine -- V-belt * Provides smooth, consistent steering feel * Rated at 3 gpm and produces up to 1,300 psi -- Recommended pump range of 1500 to 6500 rpm * Includes a -6 AN pressure and a -6 AN return fittings Remote reservoir with mounting bracket features: * All aluminum, fabricated construction, plain finish * 9 in. overall height, 3.5 in. overall diameter * 1.5 lbs. * Complete with -6 AN inlet and -10 AN outlet * Includes vented cap * Vertical mount * Not internally baffled -- Connect this reservoir using 3/8 in. (6 AN) hose -- Use rubber hose and push-lock fittings or braided stainless steel lines Deluxe head mount bracket features: * Kit provides proper installation of the Type II-style power steering pump to most SBC applications with short-style water pump * Bracket kit includes: -- Bracket to engine -- Pump to bracket -- Mounting hardware * Head mount locates the pump to the driver's side cylinder head
Not Yet Reviewed
$229.99
$206.99
Proforged fast ratio pitman arms are direct replacements designed to quicken your stock steering ratio from 16:1 to 12:1. These arms when used in conjunction with the fast ratio idler arms will improve your stock steering from 3.5 turns to 2.75 turns lock to lock. This quick ratio was previously found on rare AAR Cudas and T/A Challengers. The pitman arms are made from forged heat treated steel for rugged durability and black e-coated to prevent rust.
( 5 )
$171.95
Howe splined steering couplers are available in several spline counts to fit various steering shaft sizes, as well as Howe's steering quickeners. Machined from durable steel, these steering system connections are ideal for building your hot rod's or race car's steering shaft assembly.
( 15 )
$17.99
Proforged fast ratio pitman and idler arm kits are bolt in steering components designed to quicken your stock steering ratio from 16:1 to 12:1. These kits improve your stock steering from 3.5 turns to 2.75 turns lock to lock. This quick ratio was previously found on rare AAR Cudas and T/A Challengers. Each kit is made from forged heat treated housings and ball studs for rugged durability and black e-coated to prevent rust.
( 8 )
$239.95
Proforged fast ratio idler arms are direct replacements designed to quicken your stock steering ratio from 16:1 to 12:1. These arms when used in conjunction with the fast ratio pitman arms will improve your stock steering from 3.5 turns to 2.75 turns lock to lock. This quick ratio was previously found on rare AAR Cudas and T/A Challengers. These idler arms are made from forged heat treated steel for rugged durability and black e-coated to prevent rust.
( 3 )
$79.95
On Sale
FTI Performance offers a wide range of replacement parts for racing transmissions—from high gear drums and servo covers, to reverse piston drums, shifter detents, and more. These Powerglide reverse instant action spring kits quicken the piston release during trans-brake use.
Not Yet Reviewed
$27.99
$25.19
On Sale
Steeda aluminum rack bushings adjust both the Ackerman angle and bump steer geometry for better steering response, quicker cornering, and more stability. The aluminum bushings replace the factory rubber bushings that mount the steering rack to the front crossmember, eliminating the deflection of the rubber mounts. They have a reversible flange design and can be installed in two different ways, giving the installer the choice of maintaining the factory Ackerman geometry or increasing the Ackerman to quicken turn-in and reduce tire scrub in sharp corners. The offset bolt hole in the bushings moves the steering rack up on the crossmember to correct bump steer geometry on cars with suspension modifications such as increased caster, X2 ball joints, or aftermarket K-members. Steeda offers two different offset heights to suit your application.
( 3 )
$49.95
$46.99
—
$59.95
What's that annoying squeak? The problem could be due in part to old, worn-out, cracked, or deteriorated bushings. If that happens to be the case, Scott Drake has a solution with their replacement polyurethane sway bar bushings. These bushings are designed to reduce deflection at the bar mounts to quicken the action of stock or aftermarket sway bars, and support at the points where your factory sway bar attaches to the frame and to suspension components. Their polyurethane construction ensures long part life and allows the sway bar to function properly for improved steering response and handling.
( 1 )
$28.41
—
$42.09
These springs from TCI are a complete set of 16 direct piston release springs to quicken the release during trans-brake use. You can count on TCI to keep your valve body and trans-brake working flawlessly.
( 2 )
$47.95
Boyesen Rad Valve replacement reeds include petals, rev plates, and extra screws. They are designed to maintain the sharper throttle response and greater horsepower produced by Rad valves, while maintaining flow velocity and redirecting the intake charge to the intake ports. Featuring aero-optimized internal surfacing that corrects the problems associated with existing reed valve designs, they provide plenty of off-road torque, quicken throttle response, and ramp up horsepower throughout the rpm range.
Not Yet Reviewed
$45.99
—
$69.99
Summit Bucks
Vance & Hines' Hi-Output RR exhaust systems were inspired by their team that competed in the King of the Baggers class of the MotoAmerica Road Racing Championships. These systems capture every pulse-quickening element of their racing exhaust system into one you can put on your Milwaukee-Eight Road Glide or other Touring model as part of your own performance bagger build. Constructed of lightweight, high-grade 304 stainless steel, the hand TIG-welded headers step from 1.75 in. to 1.875 in. to 2.0 in. and feed into the same oversized collector used on the race system. The collector is even rotated to add extra ground clearance, enabling steeper lean angles through the turns. Finishing each system is a mid-length 4 in. Hi-Output megaphone emblazoned with the same double-layered laser-cut riveted badge from the race system. It features Vance & Hines innovative PCX (Power Chamber Exhaust) technology, which integrates a chambered high-flow catalyst for a bigger boost in torque off the line and roaring out of the corners. Vance & Hines Hi-Output RR exhaust systems are available in Brushed Works finish or matte black. Choose the one your prefer for your motorcycle.
Not Yet Reviewed
$1,549.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
