Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
21 Results Found For "edelbrock float"
Showing In Stock Items. Show All 30 Items.
Edelbrock Carburetor Float Kits
Make sure your carburetor has the fuel it needs with these Edelbrock float kits. The kits include floats, pins, and a float setting gauge, making it easy to be sure your carb is never short of the fuel it needs.
( 47 )
$23.95
—
$39.95
Edelbrock Q-Jet Float Assemblies
These direct replacement floats are made from a high quality phenolic resin and will fit a variety of Edelbrock and GM carbs.
( 1 )
$39.95
—
$44.95
Edelbrock VRS-4150 Race and Performance Carburetors
The new line of Edelbrock VRS-4150 Race and Performance carburetors are packed with features that will appeal to racers, engine builders and carb tuners, as well as the hot street enthusiast looking to improve performance. The VRS-4150 carburetors are street friendly but race ready—and the one-piece, cast aluminum bodies fit all 4150 and 4500 carb flange manifolds—without requiring an adapter plate. With the new VRS Series carburetors many attributes, they make for easy tuning and great versatility in many applications. They are available in 650, 750, 850, and 950 cfm models, select the model suited to your application needs. Features, specs, and benefits: * A street throttle arm, PTFE-coated throttle shafts and built-in provisions for a standard GM three-wire TPS mount add features to the carburetor that are ideal for any user * Multiple vacuum hook-ups keep this carburetor usable on the street but still ready for the track with larger capacity fuel bowls and four circuit billet metering blocks with screw-in emulsion bleeds * The 20 percent larger capacity fuel bowls feature internal ribs to control fuel slosh, and a sculpted baffle directs incoming fuel to the sides to minimize bubbles * The floats have corner cuts to avoid shutting off the fuel flow during hard cornering, and jet extender notches and jet extenders in the rear to keep the jets covered in fuel under hard acceleration * Users are able to externally adjust idle bypass air as the adjustment screws are accessible without removing the air cleaner/scoop * The advanced idle circuit features interchangeable idle discharge jets in all four corners to allow for a smooth, clean idle with the use of big, low-vacuum camshafts * Normally found only in high end racing carbs, the VRS includes fully adjustable intermediate fuel circuits, which help to provide incredible throttle response * For greater control at high rpm, the high speed/main fuel circuit is split into two bleed circuits—one each for the lower and upper sections * As an additional feature, the power valves are located on both primaries and secondary's that support optimized jetting—the power valve will add fuel as necessary while the power valve protection circuit prevents diaphragm damage from backfires
( 18 )
$827.95
—
$1,047.95
Edelbrock Pro-Flo Series Air Cleaners
Edelbrock Pro-Flo Series air cleaners work with a variety of popular carburetors, including Performer Series, Thunder Series AVS, Holley, Thermo-Quad, Quadra Jet and Carter AFB, just to name a few. Knock-outs in the air cleaner base for use with Edelbrock crank case ventilation adapters (sold separately) are provided, depending on application. Pro-Flos offer multiple styles to match yours—and sizes for a proper fit. When you're looking for an ideal solution to your hood clearance problems, consider Edelbrock Pro-Flo Series air cleaners.
( 605 )
$46.95
Summit Racing™ Carburetor Floats
Get rid of those old fuel bowl floats—and upgrade to a Summit Racing™ carburetor float. They're manufactured from Nitrophyl or brass and include thread-in brass jet extensions (where noted). Available for side hung or center hung fuel bowls, Summit Racing™ floats will keep your fuel level where it's supposed to be. Order the model recommended for your carburetor application.
( 29 )
$11.99
Edelbrock 94 Carburetor Rebuild Kits
Rebuilding your nostalgic 94 carburetor? Edelbrock 94 rebuild kits contain everything you need to do the job right. Kits include fuel inlet seat and needle, accelerator pump assembly and spring, accelerator check ball, check ball retainer, power valve assembly, float gauge and all the necessary gaskets. These rebuild kits will overhaul any Edelbrock 94 or Holley 94 2-barrel 3-bolt flange carburetor and have your hotrod running in no time. Do your rebuild right with Edelbrock 94 carburetor rebuild kits.
Not Yet Reviewed
$60.95
AED Carter and Edelbrock Carburetor Kits
AED carburetor kits include all of the necessary components to successfully rebuild and restore your Carter 9000 series and Edelbrock Performer series carburetors to their original condition. AED makes the rebuilding process easy and convenient by including all of the gaskets, needle and seats, clips and accessories, an accelerator pump, and instructions in one complete kit. Now you can buy one kit to service either of these fine carburetors. In many cases, float replacement is required to achieve maximum performance.
( 42 )
$49.99
Ford Performance Parts 427 C.I.D. 535 HP Long Block Crate Engines with Z2-Series Cylinder Heads
Drop a Ford legend reborn into your project and experience the power of Ford Performance Parts 427 c.i.d. 535 hp long block crate engines. Built on Ford's Boss 351 blocks, these American-made engines are designed to provide you with big performance in a small block package, along with great drivability. The iconic 427 c.i.d. displacement, but on a Windsor platform—they offer all the powerplant you want at a price that you'll love! Technical information: * 535 hp at 5,600 rpm * 545 lbs.-ft. of torque at 4,500 rpm * Engine type: 351 based small block Ford * 4.125 in. bore x 4.00 in. stroke * 9.5 in. deck height Boss 351 block * SCAT forged steel crankshaft * SCAT forged steel H-beam connecting rods with ARP bolts * Mahle forged pistons with floating wrist pins * Hydraulic roller camshaft * Camshaft lift: .594 in. intake/.618 in. exhaust * Camshaft duration at .050 in: 242 degrees intake/248 degrees exhaust * Ford Performance aluminum "Z2" cylinder heads * 2.02 in. intake/1.60 in. exhaust valves * PAC 1219X ovate beehive valve springs * 10.5:1 compression ratio (nominal) * Roller rocker arms; 1.65:1 ratio * Ford Performance SFI-approved vibration damper; may require a spacer for pulley alignment * Cast aluminum, black wrinkle finish, Ford Racing script valve covers; fit most non-EFI applications * Steel oil pan with windage tray and scraper; 9-qt. capacity * Premium unleaded fuel recommended * Ignition timing: 32 degrees at 4,000 rpm * 5,600 maximum recommended rpm * Internally balanced; use neutral balance flywheel (not included) * Edelbrock Super Victor intake manifold recommended (not included) * Intake gaskets and pilot bearing included * Standard rotation water pump included * Timing cover will work with most standard rotation water pumps * Fuel pump eccentric installed, allows use of mechanical fuel pump * Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W firing order) * Distributor not included * MSD distributor recommended (modifications for intake clearance necessary) * Steel distributor gear required * Built with currently available parts * Photo and specifications may vary * Available in front or rear sump configurations
( 2 )
$12,159.09
Moroso Carburetor Wedge Plates
The precise design of these Moroso carburetor wedge plates will provide you with a smooth transition of fuel from a dead start to the realm of gut-wrenching acceleration. Their precise angling ensures that the carburetor float bowls are kept level during acceleration to increase performance. These wedge plates incorporate a dual pattern to fit the standard Holley and CarterAFB/Edelbrock bolt patterns. They taper to .830 in. at their thickest point, which tilts the carburetor forward to the optimum 5 degree mark. Put Moroso carburetor wedge plates to the test--they're ready for it!
( 15 )
$56.99
JE Pistons SRP 2618 Alloy Forged Pistons
JE Pistons developed the SRP Pro 2618 Series alloy forged pistons over the course of an entire year using 3D modeling with several revisions being tested using FEA (finite element analysis). These pistons offer superior strength for high boost/nitrous racing with alloy forged 2618 aluminum, featuring designs for optimal ring seal (accumulator grooves) and low friction (skirt coatings). Optimize your engine's power for maximum performance with JE Pistons SRP 2618 Series forged pistons. Key features: * Application-Specific—best suited for racing/high-performance builds * Forged using 2618 aluminum, yielding high-tensile strength needed for high-demand performance applications * Proprietary Forged Side Relief (FSR) forging design minimizes friction and power loss with reduced skirt width and saves additional weight with a shorter wrist pin * Ring groove design placement proven to maintain positive seal in high-HP, boosted applications, along with stout top land thickness for improved strength * Low-friction skirt coating reduces wear and reduces operating noise while optimizing performance * Includes high-quality wrist pins, locks, and JE Pro Seal premium piston rings * Accumulator groove helps reduce pressure from combustion gases, reducing ring fluttering and improving ring seal for consistent power * Value-focused—provides premium features at a more accessible price point than ultra-high-end pistons, suitable for serious racers on a budget
Not Yet Reviewed
$174.99
ICON Premium Forged Pistons
ICON premium forged pistons are made from high-strength, heat-treated aluminum alloy. They feature a diamond-machined skirt, head, mini-grooves, pin bore, gas accumulator, ring grooves, and pressure-drilled pin hole oiling. The pistons have a V-rib design for light weight, strength, and maximum piston cooling. Compare weight, performance, design, and cost—and you will win with ICON!
( 43 )
$179.54
—
$911.03
Redhorse Performance 5000 Series Carburetor Inlet Fittings
Redhorse Performance offers a wide range of components for your automotive plumbing—including 5000 Series carburetor inlet fittings. They're machined from aluminum with a black, blue, red, or clear anodized finish. These carb to AN male fittings are available for single inlet, Carter/Edelbrock, and duel-feed Holley applications. Order the size and finish needed for your setup.
Not Yet Reviewed
$14.84
—
$32.34
ICON Premium Forged Piston and Ring Kits
You don't need a king's ransom to rule the track, thanks to ICON premium forged piston and ring kits. They deliver high-performance racing pistons crafted from high-strength, primary aluminum alloys and matching performance piston rings. The pistons feature fully machined heads and valve ports, advanced accumulator and mini groove technology, drilled pin holes, triple-wound spiral lock rings, and their proprietary diamond-finished skirts. ICON premium forged pistons can handle the pressure and abuse from the horsepower numbers that your engine produces. If you're ready to give up your kingdom to build more horsepower with a great set of pistons--think again! The ICON premium forged pistons and ring kit best suited for your application will help you reign victorious without spending a lot of cash.
( 20 )
$468.50
—
$1,038.21
KB Performance Hyper Piston and Ring Kits
KB Performance Hyper piston and ring kits are offered for a wide range of applications from street and towing to marine and race. The kits feature pistons cast from 390 hypereutectic alloy heat-treated to T-6 standards to make them stronger. The pistons also feature fully machined crowns and valve pockets. KB hypereutectic pistons come in several head designs, as well as standard and oversized bore sizes. All KB Hyper pistons are lightweight to improve throttle response and rpm changes, while still being strong enough to withstand high compression and high temperatures. KB Performance Hyper kits (KT) are completed with piston ring sets containing top rings of moly-coated cast iron (M) or ductile iron (D).
( 77 )
$537.97
—
$544.62
JE Pistons Big Block Nitrous Series Dome Top Pistons
JE Pistons big block nitrous series dome top pistons have ring lands designed for nitrous applications. Valve reliefs are designed to accept oversized valves and long-duration, wide-lobe separation camshafts, and they are also compatible with angle milled heads. Precision CNC-machined grooves accept 1/16, 1/16, 3/16 rings. They fit open chamber cylinder heads.
Not Yet Reviewed
$199.99
—
$1,024.99
JE Pistons Big Block Open Chamber Dome Top Pistons
JE Pistons big block open chamber dome top pistons are an excellent choice for drag race applications. Their compression height is figured using a 9.780 in. block height with zero deck clearance. The pistons include a pin, double Spiro locks, and double pin oilers. Their precision CNC-machined ring grooves will accept 1/16, 1/16, 3/16 rings.
( 4 )
$199.99
—
$1,024.99
On Sale
KB Performance Pistons
KB Performance hypereutectic pistons are made from 390 aluminum alloy and heat-treated to T6 standards, which makes them 30 percent stronger than ordinary untreated hypereutectics. Their 100 percent CNC-machined crowns, high upper compression-ring location, gas-accumulator groove, drilled oil returns, and spiral-lock retainer grooves make these pistons outstanding for performance applications. They have a lightweight, rigid-rib skirt design that stabilizes the piston in the bore. All of this adds up to pistons that fit tighter than forged types, provide improved oil control, reduce blow-by, increase ring life, eliminate cold start-up knocking, and won't cost you an arm and a leg! Thousands of models are available—find the set and options designed for your vehicle and engine application.
( 138 )
$123.64
$113.91
—
$494.57
Clearance
SRP Ford Small Block Flat Top Pistons
SRP Ford small block flat top pistons fit Ford, TFS, GT40, Canfield, Brodix Track I, OE, and Dart Windsor cylinder heads. They're made from 4032 low-expansion, high-silicon aluminum alloy that's heat-treated to SRP specifications. Their CNC-machined ring grooves accept 1/16, 1/16, 3/16 in. piston rings that are sold separately, and a wrist pin is included. These flat top models are available with two or three valve reliefs, as well as a variety of bores, strokes, and rod lengths. Choose the factory-style replacements designed for fitment in your vehicle application—sold individually or in a set of 8.
Not Yet Reviewed
$149.99
$69.50
—
$104.50
JE Pistons Open Chamber Dome Top Gas Ported Pistons
JE Pistons open chamber dome top gas ported pistons are the top choice for drag race applications. These pistons have vertical gas ports, backcut top and D wall second rings (.043, .043, 3.0mm), and a low-tension oil ring. Their compression height is figured using a 9.780 in. block height with zero deck clearance. They include a pin and double Spiro locks.
Not Yet Reviewed
$1,199.99
Clearance
SRP Ford Small Block Dish Top Pistons
SRP Ford small block dish top pistons fit Ford, TFS, GT40, Canfield, Brodix Track I, OE, and Dart Windsor cylinder head applications. They're made from 4032 low-expansion, high-silicon aluminum alloy that's heat-treated to SRP specifications. A wrist pin is included and their CNC-machined ring grooves accept 1/16, 1/16, 3/16 in. piston rings, which are sold separately. These dish top models are available in a variety of bores, strokes, and rod lengths for fitment on specific vehicles--sold individually or in a set of 8.
Not Yet Reviewed
$149.99
$69.50
RaceTec AutoTec Forged Pistons
RaceTec's AutoTec line of forged pistons offers high-quality, precision manufactured options at competitive pricing. The primary material used for AutoTec pistons is 4032 high-silicone aluminum alloy which is extremely durable, has great wear resistance, a low expansion rate, and is very low in friction. The most common applications for AutoTec pistons include muscle car restorations, performance street rods, as well as many spec racing classes. They can also withstand mild nitrous kits, small turbos, or superchargers. A large selection of sizes and styles is available. Choose the proper fit for your application build. Additional features for most pistons in the AutoTec line: * CNC Precision machined ring grooves * Top ring land gas distribution groove to enhance performance and improve ring seal * Wrist pins, pin fitting, wire locks, broached pin oilers, and accumulator groove are included * Diamond turned skirts
( 1 )
$837.00
