Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
175 Results Found For "MSD Ignition Wires"
Showing In Stock Items. Show All 180 Items.
MSD Pro-Clamp Wire Separators
MSD Pro-Clamp wire separators keep your spark plug wires neatly organized and away from damaging engine heat sources. All Pro-Clamp separators feature secure grooves for each wire and a top bracket which sandwiches the wires into place. Plus, each base has a hole for a retaining screw and a tab to hold it into position if you prefer to not let them stand alone. With a set of MSD Pro-Clamp wire separators, no tools are needed to open them and wires stay securely in place even when the cover is removed!
( 163 )
$41.62
MSD Wire Separators
MSD wire separators not only keep your plug wires away from heat sources, they also keep them far enough apart to prevent inductive crossfire and actual spark loss. The separators will clean up your wire routing and last as long as your vehicle. They're available in a variety of styles and configurations.
( 50 )
$35.08
MSD DIS Series Ignition Wiring Harnesses
Installing an MSD DIS series ignition in late models distributorless vehicles involves quite a bit of wiring but is well worth the effort. These MSD DIS series ignition wiring harnesses make the installation effort easy so you can put that new ignition control right to work! Each harness plugs directly into the factory coil pack and harness. Then there are colored wires that connect to the DIS ignition's corresponding wires. No more splicing or cutting your factory wiring.
Not Yet Reviewed
$78.55
—
$199.95
On Sale
MSD 6LS Series Ignition Wiring Harnesses
MSD 6LS Ignition harness allow you to easily connect the 6LS-2 to a factory EFI system to take advantage of timing adjustments and settings. MSD's 6LS extension harness allows you to reach the front-mounted cam sensor on an early (24-tooth trigger wheel) LS2 when installing a 6LS Ignition Controller. The 6LS-2 Controller allows you to map a timing advance curve with MSD's easy-to-use Pro-Data+ software.
Not Yet Reviewed
$152.95
$79.95
MSD Universal Wiring Harnesses
MSD offers universal wiring harnesses to simplify the installation of a MSD 6 Series box on late model vehicles. The harnesses plug in between the ignition coil and the factory coil connector. Four wires with corresponding colors and matching connectors then connect directly to the MSD 6 wires. These harnesses reduce the installation time, reduce or eliminate cut wires, and allow you to quickly convert back to the factory ignition.
( 49 )
$63.19
—
$84.29
MSD Replacement Spark Plug Wire Boot and Terminal Kits
MSD replacement plug wire boot and terminal kits are perfect for enthusiasts who build their own wire sets or need to replace damaged boots. The boots are made from a high-temperature silicone compound and feature a gray finish. The terminals have large crimp tabs to grasp the wire, and wide contacts to grip the distributor cap receptacle.
( 108 )
$15.00
—
$284.95
MSD 8.5mm Super Conductor Wire Rolls
MSD 8.5mm Super Conductor wire has a special helically wound core that has just 40 to 50 ohms of resistance per foot--but with the RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire features 40 ft. of tightly wound copper for superior conductivity. A tough 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs.
( 30 )
$41.10
—
$699.95
MSD Spark Plug Wire Bulk Rolls
These MSD spark plug wire bulk rolls are available in 6, 25,100, and 300 ft. rolls. The heli-core wire comes in blue, while the super conductor wire comes in red or black.
( 14 )
$41.10
—
$699.95
MSD Professional Racing Spark Plug Wire Boot and Terminal Kits
Designed exclusively for extreme-duty racing conditions, it's hard not to like all of the features in MSD's new Professional Racing Series spark plug wire boot and terminal kits. The boots feature a proprietary blend of materials to withstand much higher temperatures over a longer period of time than standard boots.
( 44 )
$42.11
—
$49.95
MSD 8.5mm Replacement Coil Wires
Simplify your ignition system installation. MSD replacement coil wires are used when attaching an MSD Blaster coil to an their HEI dust cover or distributor. The pre-assembled wires include two 90 degree boots and two dual crimp terminals.
( 99 )
$31.78
—
$35.08
On Sale
MSD Programmable Digital-7 to Power Grid Harnesses
MSD Programmable Digital-7 to Power Grid harnesses allow you to use your existing Programmable 7 harness to install a Power Grid system with minimal alterations. These harnesses are direct plug-ins for all existing wires, but will need two new wires run if you desire to use the two new inputs of the Power Grid.
Not Yet Reviewed
$249.99
$169.95
MSD Two Pin Connector Kits
MSD's two pin connector kits replaces damaged connectors or aids in custom wiring. This is the same connector used on MSD's magnetic pickup harnesses. Each kit comes with two connectors and four pins.
( 16 )
$15.37
MSD Extension Wiring Harnesses
MSD Ignition extension wiring harnesses are made to work with their carbureted ignition controllers. You can depend on MSD to make ignition control a snap!
( 1 )
$406.95
—
$415.95
MSD Digital-6 Replacement Wiring Harnesses
MSD Digital-6 replacement wiring harnesses will provide the quality and performance matched only by the originals. You can trust MSD to provide premium replacement parts and wiring for their ignition controls and your build. Whether you're freshening your car, or have a wiring harness with one too many splices, replace them with original components from MSD.
( 13 )
$35.08
—
$51.09
MSD Replacement Spark Plug Wire Terminals
MSD replacement spark plug wire terminals come in handy if you're servicing or replacing your spark plug boots. They're designed to fit over overtop of your existing spark plug wire and are available in different angle configurations.
( 6 )
$41.12
—
$54.85
MSD CAN-Bus Harness Extensions
MSD offers these harness extensions for use with your CAN-Bus hub. These harnesses provide the extra length you may need to reach the desired mounting location for your CAN-Bus hub. MSD CAN-Bus harness extensions are offered in a choice of lengths to meet your individual needs.
( 6 )
$26.24
—
$92.75
MSD Pro Mag 44 Extension Harnesses
MSD offers these Pro Mag 44 extension harnesses for use with your Pro Mag 44 magneto. These harnesses provide extra length to allow you to mount the Pro Mag 44s in your desired location.
Not Yet Reviewed
$142.95
MSD Replacement Spark Plug Wires
MSD replacement spark plug wires are available in two styles to suit your automotive needs. Each replacement wire is about 48 in. long. They come with the proper size boot and terminal and also supply you with a mini stripper/crimper so the wire can be custom tailored to your application.
( 21 )
$35.47
On Sale
MSD Replacement Boots
MSD boots are designed with longevity in mind. Each boot provides excellent heat resistance, as well as maximum protection against spark loss.
( 135 )
$115.95
$8.95
—
$449.95
MSD Power Grid Replacement Wiring Harnesses
MSD Power Grid replacement wiring harnesses are designed for use with your MSD Power Grid ignition timing controller. They have pre-terminated connectors installed and will connect directly to the MSD Power Grid.
( 4 )
$49.95
—
$212.95
On Sale
MSD 8.5mm Super Conductor Spark Plug Wire Sets
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 2058 )
$275.99
$89.95
—
$726.95
MSD Pro Stock Hemi Tubes
Replace your stock spark plug wire boots with these MSD Pro Stock Hemi Tubes. These Pro Stock Hemi Tubes are made from injection-molded Rynite and securely connect your spark plug wires to the spark plugs. Make installing your spark plug wires easier with these MSD Pro Stock Hemi Tubes.
( 1 )
$163.95
MSD Deutsch Connectors
With these MSD Deutsch connectors, there's no excuse for losing a race due to poor wiring connections. Their compact housings are molded from durable plastic that will not harden or crack, and feature indexing tabs to prevent mismatching. The terminals grip the wire with strong crimp tabs that lock into position. The connectors use thick seals to keep water, mud, and debris away from the contacts, and they can handle more current than conventional connectors.
( 21 )
$21.01
—
$49.95
MSD Hemi Tubes
MSD Hemi tubes are molded from Rynite for incredible strength and high-spark isolation properties. For easy assembly and disassembly, MSD has incorporated a new twist-lock cap at the base.
( 4 )
$114.95
—
$271.95
