Availability
Showing In Stock Items. Show All 29 Items.
On Sale
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 294 )
$151.70
—
$592.00
$136.53
—
$532.80
On Sale
PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module are designed to provide maximum ignition performance and easy installation, all at a price that you can afford. They allow you to upgrade your outdated points or stock electronic distributor with a performance-proven unit. The distributors feature the patented Ignitor II® electronic ignition module and a CNC-machined 6061 T-6 polished billet housing. PerTronix electronics are compatible with any inductive ignition system coil, but high-rpm performance can be improved when they are used with the low-resistance (0.6 ohm) Flame-Thrower II coil. Their stand-alone design makes them plug-in units that require no additional ignition, but they are compatible with multi-spark CD ignition boxes for outstanding versatility. Additional features include a tempered shaft, an upper roller bearing, and an oil-impregnated sintered bronze lower bushing. The PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module come with a factory-set performance curve, a mechanical advance limiting adjustment, and a small, high-dielectric strength cap and rotor for applications with little clearance.
( 357 )
$272.10
—
$464.15
$244.89
—
$417.74
On Sale
PerTronix Ignitor II® lobe sensor solid-state ignition systems are smarter! Ignitor II units sense the coil current level and employ a powerful micro-controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the entire rpm range, and these systems develop up to four times more energy between 3000 and 5000 rpm than standard ignition systems. Order the kit recommended for your vehicle and engine application. Features include: * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops on-average four times more available energy between 3000 and 5000 rpm, and two times more available plug voltage * Compensates for inherent electronic delay by adjusting the spark timing throughout the entire rpm range * Synchronized peak current and spark timing reduces heat build-up * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger
( 31 )
$161.75
—
$239.25
$145.58
—
$215.32
On Sale
PerTronix Flame-Thrower billet plug and play marine distributors feature the Ignitor II® electronic ignition module, a billet CNC-machined housing, an upper roller bearing, and a self-lubricating, oil-impregnated copper powder metal lower bushing. They are compatible with any inductive ignition system coil and come with a factory-preset performance curve, a mechanical advance limiting adjustment, and a small-diameter, high-dielectric strength cap and rotor.
( 80 )
$402.60
—
$464.15
$362.34
—
$417.74
On Sale
Keep your PerTronix Ignitor® or Ignitor II® conversion kit in top working condition with these replacement modules. There's no need to purchase a whole new PerTronix conversion kit; just replace the bad module and you'll be back on the road. Order the model designed for your specific vehicle application. Caution—these are not conversion kits; they are replacement modules only.
( 42 )
$106.05
—
$179.30
$95.44
—
$161.37
On Sale
PerTronix Ignitor® and Ignitor II® external coil conversion kits make it easy to setup your ignition system with an external coil. These distributor replacement kits include components designed specifically for use with Ignitor® and Ignitor II® modules.
( 1 )
$145.85
$131.26
On Sale
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 83 )
$223.85
—
$239.25
$201.46
—
$215.32
On Sale
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 1000 )
$67.90
—
$479.55
$61.11
—
$431.60
On Sale
PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems
( 208 )
$144.25
—
$190.40
$129.82
—
$171.36
On Sale
PerTronix Flame-Thrower plug and play billet distributors with Ignitor I® module are designed to provide maximum ignition performance and easy installation, all at a price that you can afford. They allow you to upgrade your outdated points or stock electronic distributor with a performance-proven unit. The distributors feature the patented Ignitor I® electronic ignition module and a CNC-machined 6061 T-6 polished billet housing. PerTronix electronics are compatible with any inductive ignition system coil, but high-rpm performance can be improved when they are used with the low-resistance (0.6 ohm) Flame-Thrower II coil. Their stand-alone design makes them plug-in units that require no additional ignition, but they are compatible with multi-spark CD ignition boxes for outstanding versatility. Additional features include a tempered shaft, an upper roller bearing and an oil-impregnated sintered bronze lower bushing. The PerTronix Flame-Thrower plug and play billet distributors with Ignitor I® module come with a factory-set performance curve, a mechanical advance limiting adjustment, and a small, high-dielectric strength cap and rotor for applications with little clearance.
( 2 )
$387.25
—
$439.75
$348.52
—
$395.78
On Sale
PerTronix Flame-Thrower plug and play billet distributors with Ignitor III® module offer the latest version of Pertronix's ignition modules. They include the patented Ignitor III® electronic ignition module and a CNC-machined 6061 T-6 polished billet housing. The Ignitor III® features adaptive dwell, which maintains peak energy throughout the entire rpm range, reduces misfires and improves engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup and increased coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay and increase energy for quicker, easier starting by sensing startup. The PerTronix Flame-Thrower plug and play billet distributors with Ignitor III® module have an integrated digital rev limiter with LED feedback for precise RPM setting and a memory safe function that stores settings eliminating unintended changes to the rev limit.
( 137 )
$433.40
—
$477.95
$390.06
—
$430.16
On Sale
Upgrade from your stock coil to more powerful PerTronix Flame-Thrower II coils. Designed for use with PerTronix's own Ignitor II® ignition systems, these 0.6 ohm coils deliver more than 45,000 V to your plugs for fuller, more complete combustion. Most have oil-filled canisters to keep the low-resistance windings secure and cool for reliable long-term performance. But there also are epoxy-filled versions for when vibration protection is needed. The Flame-Thrower IIs are available in chrome or black (epoxy, black only) and are not for use with original Ignitor ignition systems.
( 285 )
$63.10
—
$71.05
$56.79
—
$63.94
On Sale
Replace your worn out Lucas 35D distributor with a Pertronix Flame-Thrower performance cast Rover V8 distributor that will deliver the performance you demand. These Flame-Thrower performance distributors are the perfect solution for Rover V8 engine swaps. Available with integrated Ignitor or Ignitor II technology increases energy levels and provides maintenance free operation. Installation is simple with only two wires to attach. These distributors are made from all new castings and modeled after the original Lucas 35D housing. Each distributor is then precision machined for an exact fit. Additional features include: * All new lightweight cast aluminum housing * Integrated electronic ignition delivers more voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life * Rotating cobalt magnets trigger the Hall Effect integrated circuit which provides precise timing * High dielectric strength distributor cap * Balanced rotor with overmolded brass contacts * Legal in all 50 states carrying CARB EO# D-57-23
( 8 )
$318.80
—
$383.00
$286.92
—
$344.70
On Sale
PerTronix offers a wide range of parts and accessories for ignition systems—including these ignition wire towers. The replacement spark plug terminals are designed for Ignitor and Ignitor II kits. The original Ignitor module is ideal for restorations. Ignitor module kits are extremely easy to install and fit into your original distributor to maintain your stock look. No additional ignition box is required, maintaining a clean look under the hood. Ignitors are available for most distributors that came with mechanical breaker points—and will cover automotive, marine, industrial, and agriculture applications.
Not Yet Reviewed
$28.10
$25.29
On Sale
These PerTronix billet plug and play distributors feature the Ignitor II electronic ignition module, a billet CNC-machined housing, an upper roller bearing, and a self-lubricating, oil-impregnated copper powder metal lower bushing. They are compatible with any inductive ignition system coil and come with a factory-preset performance curve, a mechanical advance limiting adjustment, and a small-diameter, high-dielectric strength cap and rotor.
( 6 )
$402.60
—
$526.25
$362.34
—
$473.62
On Sale
PerTronix Flame-Thrower ignition system bundles offer improved performance with more horsepower and better throttle response. Plus, they include everything you need in one box at a great price. Each of these bundles includes: a Flame-Thrower billet plug-and-play distributor with Ignitor II or Ignitor III module technology; a matching low-resistance Flame-Thrower chrome coil; and a set of Flame-Thrower 8mm MAGx2 universal wires (featuring silicone jackets) to resist high temperatures. PerTronix Flame-Thrower ignition system bundles typically offer a choice of red or black cap, and they're available for the most popular Chevrolet and Ford engines, as well as Chevy marine engines.
( 6 )
$496.50
—
$574.50
$446.85
—
$517.05
On Sale
Some PerTronix Ignitor and Ignitor II kits are provided with a rotor to ensure proper magnet sleeve engagement. PerTronix replacement distributor rotors, as well as other parts and accessories, offer unmatched quality to accommodate the performance levels your distributor was engineered for. These rotors are available for a variety of distributor applications found in vehicles from the 1950s and up.
( 15 )
$7.40
—
$20.00
$6.66
—
$18.00
Sierra Marine Flame-Thrower electronic distributors are magnetic triggered billet distributors. They are designed to meet or exceed SAE J1171 standards. Features and benefits include: * Cobalt magnets and Hall Effect trigger for stable timing and precise spark duration * Compensates for inherent electronic delay * Synchronized peak current and spark timing reduces heat build-up * Compatible with most capacitive discharge ignition boxes * Integrated patented Ignitor II technology with adapter dwell control * Non-vented distributor cap equipped with stainless steel fasteners * Triple screen spark arrestor for added protection
Not Yet Reviewed
$576.99
—
$661.99
On Sale
If you've upgraded your stock points ignition with a PerTronix Ignitor or Ignitor II ignition module, you may also want an upgraded coil wire to take full advantage of your upgrade. PerTronix can help, without the cost of an entire ignition wire set—this coil wire is all you need.
( 6 )
$11.85
$10.66
On Sale
PerTronix Flame-Thrower HP distributors feature new, lightweight, cast aluminum housings and a tailored advance curve for optimal performance and drivability. They use an integrated Ignitor II® electronic ignition with variable dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. The distributors develop, on average, four times more available energy between 3,000 and 5,000 rpm and two times more available plug voltage. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing ignition coil and module life. The PerTronix Flame-Thrower HP distributors include a balanced rotor with an over-molded brass contact and a high-dielectric cap with brass terminals.
Not Yet Reviewed
$335.25
—
$368.15
$301.72
—
$331.34
Scott Drake offers electronic ignition conversion kits for a wide range of applications, including many Ford, Lincoln, Mercury, and Detomaso cars, trucks, and vans from the 1950s, '60s, and '70s. Ignitor solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor is an ideal choice for collector car restoration because it fits entirely under the distributor cap. Fits Motorcraft single points distributor; no external control box.
Not Yet Reviewed
$154.95
On Sale
Pertronix Flame-Thrower stock look cast distributors are loaded with all of the features that you would expect from a high performance part, and yet they maintain the original look, for the ultimate "sleeper." Pertronix builds each distributor with all-new components, not from remanufactured parts like some companies do. No longer will you need to hassle with adjusting points or replacing capacitors, because these distributors are equipped with maintenance-free Ignitor electronics, providing decades of trouble-free operation. Each distributor is complete with a high-quality cap and rotor, so you're ready to run right out of the box. Stock look distributor features include: * All-new lightweight cast aluminum housing, modeled after the original Delco and Motorcraft distributors * Hardened gear ground to exact tolerances for precise mesh with cam * Adjustable vacuum advance canister, providing extra tunability * Optimized phasing to ensure maximum energy to the spark plug * Tailored advance curve for optimal performance and drivability * Integrated electronic ignition--available with solid-state Ignitor or the powerful Ignitor III with built-in adjustable REV limiter and multi-spark through redline * High dielectric strength cap and rotor with brass contacts
( 254 )
$255.65
$230.08
Sierra Marine offers a variety of ignition coils to maximize your engines output. All Sierra ignition coils are engineered and quality-built to give you the most reliable coil possible. The low-resistance provides a higher output, helping your marine engine make the most of every spark. Order the Sierra Marine ignition coil that is best suited to fit your application requirements.
( 2 )
$96.99
On Sale
Maximize your ignition performance with PerTronix marine distributor caps! These marine distributor caps are non-vented with specially designed stainless steel hardware. They are designed to meet or exceed OEM specifications for accurate, dependable performance.
( 3 )
$61.95
—
$73.20
$55.76
—
$65.88
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
