2025 | Summit Racing

Ford Performance Parts F-150 Supercharger Kits

These Ford Performance Parts F-150 supercharger kits are designed to put approximately 160 hp and 160 ft.-lbs. of torque at the rear wheel. They feature an intercooled design, use the factory throttle body, and include a 95mm mass air meter. Ford Performance Parts F-150 supercharger kits include a Pro-Cal voucher to get your computer custom-calibrated.

5.0 out of 5 stars ( 1 )

$9,752.99

Roush 2024 5.0L Mustang Phase 2 Supercharger Kits

You can transform your 2024 Ford Mustang into a true beast with Roush Phase 2 supercharger kits. Developed in partnership with Magnuson Superchargers and using Roush diagnostic tuning software for best-in-class calibration delivery and diagnostic capability, they unleash an extraordinary 810 hp and 630 lbs.-ft. of torque, propelling your driving experience to new heights. Each kit boasts a dual throttle body, front inlet, front drive, dual intercooled, inverted R2650 system with an 84mm pulley, peaking at 13 psi boost at 7,500 rpm. Revel in the unparalleled power, drivability, and performance that will make every drive an exhilarating experience. Features and benefits: * Dual front inlet, front drive, TVS R2650 supercharger with optimized, high flow inlet port for ultimate airflow capability * Unique Roush Red head unit * Reuses stock 80mm throttle bodies; retains symmetrical appearance and allows for reuse of stock induction components * Inverted design allows for large, high-efficiency, dual intercoolers for excellent heat transfer and lower intake air temperatures * High-flow, dual cone fuel injectors with optimized director plates for ideal injector targeting * Custom, billet fuel rails provide maximum flow with minimum restriction, while also ensuring correct injector orientation every time * Custom FEAD design and hardware allow for supercharger belt to run closer to the engine to reduce load on the crankshaft for ultimate reliability and durability * Large front heat exchanger provides the lowest possible intercooler temperatures while minimizing restriction to the stock cooling module; custom design for ease of installation--does not require removal of the vehicle fascia (less install time, less risk of damage) * Custom degas bottle provides huge volume and eliminates coolant aeration for ultimate cooling capacity * High-flow Bosch PCE intercooler pump * All hoses are custom formed for ultimate ease of installation and underhood appearance * Kit packages under the factory hood and K-brace with no modifications (K brace does not need to be removed for installation) * All wiring is plug-and-play * Colder heat range, reduced gap, high-quality Ford Performance spark plugs

Not Yet Reviewed

$9,995.00

GearStar GM 4L80E Level 3 Transmissions

GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L80E Level 3 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 600 hp * Up to 600 lb.-ft. of torque * Stall: 2,600 to 3,600 * Custom-built 10 in. billet racing lock-up converter * Master overhaul kit with Alto hardened steels * Raybestos Stage 1 frictions * TransGo reprogramming kit * Filter * Torrington bearing kit * Bushing kit * Thrust washer kit * Internal wiring harness * New manifold pressure switch * New EPC solenoid * New PWM solenoid * New input and output speed sensors * New 1-2 and 3-4 shift solenoids * Expanded capacity forward clutch drum * Extra-capacity 2nd gear clutch assembly * Expanded capacity 3rd clutch drum * Heat-treated input and main shafts * Heat-treated forward steel clutch hub * Updated molded steel direct clutch piston * Updated reverse band * New low roller assembly * Wide kickdown band with new apply piston * Heavy-duty intermediate sprag * Updated boost valve * Updated TCC regulator valve * Blue printed pump and valve body * Transmission mount * New OEM steel pan

Not Yet Reviewed

$6,845.00

McGaughy's Premium Suspension Lift Kits

McGaughy's Premium suspension lift kits are a high-quality way to outfit your rig with a new attitude. Delivering your preferred 2 to 10 in. front and/or rear lift, these kits provide more than their basic package and include everything you need to achieve the proper stance. McGaughy's offers different options and components in their kits to provide the most complete suspension kit for your specific vehicle; and most of the parts are finished with a durable black or silver powdercoat. Elevate your truck; order the suspension lift kit recommended for your application.

2.0 out of 5 stars ( 1 )

$5,688.00

GearStar GM 4L80E Level 4 Transmissions

GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L80E Level 4 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 800 hp * Up to 700 lb.-ft. of torque * Stall: 2,800 to 3,400 * Custom-built, custom-stalled 10 in. billet racing lock-up converter * Master overhaul kit with Alto hardened steels * Raybestos Stage 1 frictions * TransGo reprogramming kit * Filter * Torrington bearing kit * Bushing kit * Thrust washer kit * Internal wiring harness * New manifold pressure switch * New EPC solenoid * New PWM solenoid * New input and output speed sensors * New 1-2 and 3-4 shift solenoids * Expanded capacity forward clutch drum * Extra-capacity 2nd gear clutch assembly * Expanded capacity 3rd clutch drum * Heat-treated input shaft * 300M main shaft * 300M forward clutch hub * Updated molded steel direct clutch piston * Updated reverse band * New low roller assembly * Wide kickdown band with new apply piston * Heavy-duty intermediate sprag * Updated boost valve * Updated TCC regulator valve * Blueprinted pump and valve body * Transmission mount * New OEM steel pan

1.0 out of 5 stars ( 1 )

$7,845.00

Summit Bucks

Ford Performance Parts 5.0L Coyote Gen 4 Aluminator SC Crate Engines

Built for high performance applications, the Ford Performance 5.0L Coyote Gen 4 Aluminator SC crate engines are a powerhouse—ideal for custom race builds and 2024 GT Mustangs. While the Aluminator block, cylinder heads, oil pan, and intake manifold are factory pieces, Ford Performance replaces the hypereutectic pistons and sintered-steel rods with Mahle forged slugs, ARP 2000 rod bolts, and Manley forged H-beam rods, keeping the factory 12.0:1 compression ratio in naturally aspirated form and 9.5:1 on its boost-ready Aluminator crate. These flagship crates are quite popular with Ford diehards in the custom car and street rod world—because who really wants to put a Chevy LS in a deuce coupe? Crate engine features and specs: * Fits 2024+ Mustang GT * 5.0L (302 cubic inches) * 9.5:1 compression ratio (nominal) * Mahle hard anodized forged pistons with Grafal low friction coating * Manley H-beam connecting rods with ARP 2000 bolts * Forged steel crankshaft * Uses production 2024 Mustang GT aluminum block * 2024+ Production oil pan * Tuned composite Mustang GT intake manifold with production dual drive-by-wire 80mm throttle bodies with variable runner control * Four-valve-per-cylinder aluminum heads with roller-finger followers reduce friction. * Mustang GT production camshafts * Includes Ford Performance colder, heat range zero spark plugs (M-12405-M50A) * Includes Ford Performance oil filter (M-6731-FL820) * Includes billet steel gerotor oil pump gears (M-6600-M50A) * Vehicle harness and PCM not included * Does not include alternator (for alternator kit: refer to part numbers M-8600-M50BALT or M-8600-M50ALTA) * Engine mount bosses and bell housing mount pattern common to 4.6L modular engines * Does not include exhaust manifolds

Not Yet Reviewed

$14,826.99

Roush 2024 5.0L Mustang Phase 1 Supercharger Kits

Ready to take your 2024 5.0L Mustang GT to the pinnacle of performance? Roush Phase 1 supercharger kits are engineered to transform your Mustang into a 740 hp powerhouse with unbeatable durability, cooling, and power delivery. The 740 hp, 600 lbs.-ft. of torque Roush S650 Mustang Phase 1 supercharger kit is engineered to provide exceptional performance through innovative design and cutting-edge components, tailored specifically for Mustang enthusiasts seeking peak horsepower and reliability. Roush achieved a 10.55 second 1/4-mile at 133 mph and 0-60 3-seconds with a 1.39G acceleration force on a stock car with this supercharger and slicks on a prepped track (10R80 automatic transmission, 3.55 rear gear ratio). Additional product features and benefits: * This supercharger features a dual front inlet and front-drive setup, maximizing airflow with an optimized, high-flow inlet port. It's designed for ultimate airflow capacity, ensuring your engine breathes freely to produce unparalleled horsepower. * The supercharger head unit boasts a unique Roush Red finish, adding an unmistakable, high-performance look to your engine bay. * The kit reuses the factory twin 80mm throttle bodies, retaining a symmetrical appearance and allowing you to reuse stock induction components for a clean and streamlined look. * Featuring an inverted design, the Roush Phase 1 kit houses dual high-efficiency intercoolers. This setup maximizes heat transfer while lowering intake air temperatures, keeping your engine cool under high demand. * High-Flow Dual Cone Fuel Injectors: Equipped with optimized director plates, the injectors target fuel precisely for efficient combustion and enhanced performance. * Billet aluminum fuel rails provide maximum flow with minimal restriction, ensuring correct injector alignment and a consistent fuel supply to meet the demands of high performance driving. * Designed with a custom FEAD, 90mm pulley, and strategic hardware placement, the supercharger belt runs closer to the engine, reducing crankshaft load and enhancing overall reliability. * The large front heat exchanger delivers exceptional intercooling with minimal restriction to the factory cooling module. Its custom design makes installation straightforward, with no need to remove the front fascia, saving install time and minimizing any risk of damage. * Each kit includes a high-capacity degas bottle that prevents coolant aeration, offering superior cooling capacity for consistent performance. * The intercooler pump is a high-flow Bosch PCE model, delivering reliable cooling to support long-lasting supercharger performance. * Every hose in this kit is custom-formed to ensure a clean installation and streamlined underhood appearance, making the system as easy to install as it is to admire. * The entire kit is engineered to fit beneath the stock Mustang hood and K-brace without any modification. The K-brace doesn't need to be removed, making installation simpler and preserving the structural integrity of your Mustang. * All wiring is plug-and-play, offering a smooth and straightforward installation process. * Colder heat range spark plugs with a reduced gap come pre-installed, ensuring optimal performance and durability under increased boost. * The kit is calibrated with Roush's Diagnostic Tuning Software, delivering best-in-class performance while maintaining seamless diagnostic capabilities. This software ensures the kit runs smoothly while adhering to Roush's high standards. * Developed in partnership with Magnuson, a company with over 50 years of supercharging experience, this kit brings together Roush's and Magnuson's expertise for a product that excels in performance, durability, and innovation.

Not Yet Reviewed

$9,995.00

Holley Off-Road 2025+ Ram 1500 Performance Packages

Holley Off-Road has been working hard to bring innovation and incredible products to your Ram 1500 platform. These Performance Packages by Holley are a comprehensive performance upgrade kit tailored for 2025+ Ram 1500 pickups. The suspension upgrades feature ADS Racing Shocks Mesa 2.5 Series shocks, which are larger than stock, providing increased fluid capacity to prevent shock fade and deliver exceptional off-road durability combined with commuter comfort. The kit also includes a Flowmaster Signature Series exhaust system, known for its hand-welded 304 stainless steel construction and balanced sound profile, offering an aggressive yet moderate tone. Additionally, each package is equipped with a tuner suited for each model year, including DiabloSport PredatorX, Intune 3, and DFM Module + Amp'd Throttle Boost Kit, all of which provide pre-loaded tunes and customization options for optimal performance. Finally, Big Claw Performance rotors are included, designed for improved braking performance and enhanced cooling to ensuring safety and reliability during high-performance driving. Gear up your 2025+ Ram 1500 pickup for your next off-road adventure with one of these complete Performance Package upgrades from Holley Off-Road.

Not Yet Reviewed

$6,020.95

ADS Direct-Fit MBR Coilover Suspension Systems

ADS offers direct-fit MBR coilover suspension systems for a variety of applications, including many Can-Am UTV models from 2017 and up. MBR technology, or Multi-Stage Bypass Ring, embodies a genuine multi-stage bypass system where each zone is independently adjustable via a positive stop helix system. This design ensures ample flow, similar to 7-tube external bypasses on 16 in. stroke variations; and internal free bleed ports enable tuners to optimize the damping curve for specific vehicle needs. A true top-out zone provides both mechanical and hydraulic damping, guarding against shock damage during full extension in harsh conditions, although the use of limit straps is recommended for racing and severe use. Additionally, the 4-way adjustable reservoir allows independent high- and low-speed adjustments for compression and rebound events. A dual hose system establishes a genuine recirculating fluid path to the reservoir, maximizing fluid cooling with internal diverters ensuring fluid flow across the entire shock body for enhanced cooling efficiency. Each unit undergoes vacuum bleeding and features full synthetic fluid to reduce fade and extend product life. Furthermore, large 2.5 in. reservoirs increase fluid capacity to aid in cooling, while high-temperature seals prevent blow-by for consistent performance across a wide temperature range. Threaded end caps prevent contamination from external sources. Finally, a 3-stage urethane seal package delivers unmatched sealing performance, suitable for extreme cold snow-ridden trails and scorching deserts alike. Sold with front pair and rear pair.

Not Yet Reviewed

$9,749.95

ProCharger P-1X High-Output PRO Supercharger Systems

Bolt on more power with ProCharger P-1X High-Output PRO supercharger systems. Available in several kit and finish options, each P-1X supercharger system allows you to tailor the system to your truck, turning it into an absolute torque and horsepower monster. Select the ProCharger P-1X High-Output PRO system with the options desired for your truck. Benefits: * Reliability/durability of 200k+ miles * Increased torque for towing * Smooth power for on-road and off-road * Optimum power for 10-speed transmissions * Quick/easy install (DIY friendly) * Complete turnkey systems with tuning * Large air-to-air intercoolers for maximum power * 100 percent reversible, no permanent modifications * No engine disassembly required * Fuel mileage friendly * Easy, low maintenance * Supercharger mounting location minimizes heat Features and specs for HO PRO system: * Gain 75 to 80 percent+ more horsepower * 11 to 12 psi boost * P-1X supercharger (satin finish) * Uses factory 6-rib shared drive * 1300+ hp air-to-air intercooler * ProFlow blow-off valve * PCM tuning provided * Fuel system upgrade components * Typical install time is approximately 6 to 8 hours High Output PRO options available: * Black or polished finish for supercharger and/or bracket * Black finish for intercooler * Helical gear set for noise reduction * Bullet blow-off valve * Race blow-off valve * 1600+ hp air-to-air intercooler upgrade

Not Yet Reviewed

$9,099.00

—

$9,644.00

Camburg Engineering FOX 2.5 Elite DSC Lift Kits

Camburg Engineering offers FOX 2.5 Elite DSC lift or leveling kits for a variety of applications, including many Ford F-150 and Bronco trucks from 2015 and up. These high performance mid-travel suspension systems include adjustable front and rear shocks, and billet or tubular uniball upper control arms. The front coilovers provide improved ride quality and the ability to lift your vehicle up to 3 in. for both on and off-road use. The shocks have a 2.5 in. diameter body for increased oil capacity and are fully rebuildable and revalveable. Remote external reservoirs help lower operating temperatures, and the Dual Speed Compression (DSC) adjuster allows for precise tuning—with 12 low-speed and 10 high-speed compression levels. The integrated coil spring can be adjusted for preload and ride height. Camburg's upper arms are designed to increase wheel travel, improve geometry, and enhance driving characteristics. Kits are available with rear gas-charged adjustable (or non-adjustable) monotube shocks with reservoir.

Not Yet Reviewed

$6,058.90

—

$7,058.90

ProCharger P-1X High Output Supercharger Systems

ProCharger P-1X high-output supercharger head units feature the robust, self-contained gearcase that is standard on most ProCharger models, but with a new aerodynamic compressor design. They create cooler-charge air temperatures and more horsepower at the same boost level and step-up ratio as their industry-standard supercharger kits (P-1SC-1 and D-1SC). This higher efficiency design is engineered to be a bolt-in replacement for both of those—they fit in the same brackets—and offers greater maximum-power potential. The compressor side of these superchargers (the volute and impeller) was redesigned with greater efficiency and less parasitic engine load in mind. This produces less heat and power needed to spin the impeller—and that adds up to more horsepower. Bolt-on some of the largest street-legal power gains available with a ProCharger P-1X high-output supercharger system. Additional features: * 10-15 flywheel horsepower gain on otherwise stock, modern V8 automotive engines at the same boost level and pulley size (versus P-1SC-1 models) * Larger gains possible at the same boost level with built and modified motors * 875-plus horsepower-capable * Designed for today's high-flowing modern V8 engines producing 300-plus naturally-aspirated horsepower * Available as optional upgrade with ProCharger systems and tuner kits * Highly-durable, high-horsepower designs with a compact, state-of-the-art 9.0 in. housing/volute * Available with standard or reduced-noise level * Slightly larger volutes than P-1SC-1/D-1SC models

Not Yet Reviewed

$8,909.00

MagnaFlow xMOD Series Performance Exhaust Systems

MagnaFlow xMOD Series performance exhaust systems offer unrivaled exhaust performance! These revolutionary, fully modular exhaust systems will allow you to easily personalize and fine-tune to the power and sound you want. They also offer the benefits that MagnaFlow premium exhaust is known for—lifetime warrantied stainless steel construction and dyno-proven performance featuring straight-through mufflers and fast-flowing mandrel bent pipes. Together with the xMOD modules and deletes that provide configurable flow and sound levels, your vehicle's exhaust moves to the next level with support for your present—and future power needs. The power and sound is yours with MagnaFlow xMOD Series premium performance exhaust systems. MagnaFlow xMOD Series features: * xMOD muffler modules offer MagnaFlow's proven straight-through design and race-bred quick-release V-band clamps for quick installation and removal for when you want that race car sound, instead of the deep, aggressive signature MagnaFlow exhaust note * xMOD xTreme deletes are equipped with the same quick-release V-band clamps allowing for the removal of the muffler modules for that xTreme sound experience. Use of the xTreme deletes is recommended for track use only. * Opti-Flow modules feature a fast-flowing mandrel-bent stainless steel design optimized for stock power, plus minor modifications * xTreme Flow modules feature increased flow capacity mandrel-bent big bore design for big power modification support

5.0 out of 5 stars ( 1 )

$5,005.00

—

$5,199.00

Roush 2021-25 5.0L F-150 Phase 1 Supercharger Kits

Roush 2021-25 5.0L F-150 Phase 1 supercharger kits provide instant throttle response and can generate increased power through the engine's entire powerband. They utilize the 2.65L R2650 TVS supercharger, adding an additional 305 hp over stock, boosting power output to 705 hp and 635 lb.-ft. torque! As always, this power comes with peace of mind. This Roush Performance system is backed by their in-house 3-year/36,000-mile limited powertrain warranty when installed by a certified ASE technician. The roots-type positive displacement supercharger with twin 4-lobe rotors that are twisted 170 degrees offers a long list of benefits including, greatly enhanced thermal efficiency, higher volumetric capacity, higher operating speeds, a smoother, more efficient flow of air into the engine, and improved noise and vibration characteristics. Roush supercharger kits have completed hot development trips to validate cooling performance, AC performance, and towing capability. Over 900 hours of dyno engine durability and testing were completed to validate the supercharger and meet Roush Performance's engine durability requirements. Key features and benefits: * Billet aluminum viscous crankshaft damper developed by Roush engineers to reduce the increased torsional inputs needed to handle the increased power level, improving durability and longevity of supercharger * Uniquely developed spark plugs, optimized for forced induction application * 107 percent larger LTR surface area for increased cooling (2 times larger than the previous Roush low-temperature radiator) * Retains all factory driving modes * 3-year/36,000-mile Limited Powertrain Warranty included when installed by Ford dealer or an Automotive Service Excellence-certified technician * Includes all necessary installation hardware * Roush Performance calibration included (to be downloaded using the Roush RDT software) * Calibration optimized for 93 octane fuel (premium fuel recommended, compatible with 91 octane) * Roush calibration removes the cylinder deactivation feature (Variable Displacement Engine)

Not Yet Reviewed

$8,899.99

Camburg Engineering King 3.0 Lift Kits

Camburg Engineering offers King 3.0 lift or leveling kits for a variety of applications, including many Ford, Chevy, and GMC trucks from 2007 and up. They utilize 1.25 in. uniball or KINETIK billet upper control arms, combined with King 3.0 Series front coilvers with compression adjusters and rear 3.0 bypass shocks. This combination of parts not only improves the ride and handling on-road, but more so off-road with the larger diameter shocks and external reservoirs. With the upper arms, these shocks increase wheel travel. Additional notes: * 0-2.5 in. lift, depending on model * Improved ride and handling, both on and off-road * Eliminates weak upper ball joint * Increased wheel travel * Corrected suspension geometry * Note: Some factory wheels will not clear the upper arm and may require a wheel spacer. Camburg highly recommends aftermarket wheels with a zero offset with all Chevrolet kits for optimum performance and fit.

Not Yet Reviewed

$7,274.55

CSF Intercoolers

CSF intercoolers are a complete, full line of intercoolers--with coverage ranging from Audi to Volvo. Several different styles are available, including plastic-aluminum and all-aluminum, with standard tube and fin cores as well as heavy-duty bar and plate cores. CSF OE-replacement intercoolers provide a drop-in fit requiring no modifications. All CSF intercoolers are built to OE specifications, and incorporate the same high-quality and value that CSF has been known for and has represented in the industry for decades.

4.22 out of 5 stars ( 18 )

$5,995.00

Holley 2017-2025 2-Door Can-Am X3 Performance Packages

Holley offers performance packages for 2017-2025 2-door Can-Am Maverick X3 models, designed to enhance power, handling, and safety for all your off-road adventures. Each package is expertly curated with top-tier aftermarket parts from the most trusted names in the industry, including XDR, Simpson, ADS Racing Shocks, and more. No guesswork. No compromises. Just proven upgrades designed to transform your UTV into a trail-dominating machine. Whether you're a weekend warrior or a hardcore off-road enthusiast, Holley's UTV Performance Packages can give you the confidence to push further, ride harder, and perform better! Features and benefits: * High-flow intake and exhaust systems—boost horsepower and torque with improved airflow and aggressive sound * Performance suspension upgrades will allow you to tackle the toughest terrain with smoother rides, better control, and more travel * Seats and harnesses—stay safe and locked in when the ride gets rough * Premium seating and multi-point harness systems keep you secure and comfortable through high-speed runs, sharp turns, and uneven terrain * Bulletproof durability components—built to withstand harsh conditions, extreme use, and everything the trail throws your way * Each kit is engineered for easy installation, so you can spend less time in the garage and more time exploring

Not Yet Reviewed

$12,168.95

Holley 2017-2025 4-Door Can-Am X3 Performance Packages

Holley offers performance packages for 2017-2025 4-door Can-Am Maverick X3 models, designed to enhance power, handling, and safety for your off-road adventures. Each package is expertly curated with top-tier aftermarket parts from the most trusted names in the industry, including XDR, Simpson, ADS Racing Shocks, and more. No guesswork. No compromises. Just proven upgrades designed to transform your UTV into a trail-dominating machine. Whether you're a weekend warrior or a hardcore off-road enthusiast, Holley's UTV Performance Packages can give you the confidence to push further, ride harder, and perform better! Features and benefits: * High-flow intake and exhaust systems—boost horsepower and torque with improved airflow and aggressive sound * Performance suspension upgrades will allow you to tackle the toughest terrain with smoother rides, better control, and more travel * Seats and harnesses—stay safe and locked in when the ride gets rough * Premium seating and multi-point harness systems keep you secure and comfortable through high-speed runs, sharp turns, and uneven terrain * Bulletproof durability components—built to withstand harsh conditions, extreme use, and everything the trail throws your way * Each kit is engineered for easy installation, so you can spend less time in the garage and more time exploring

Not Yet Reviewed

$13,754.95

On Sale

Belltech Suspension Lift Kits

Elevate your truck or Jeep to new heights with Belltech's all-new suspension lift kit systems. They're precision-engineered to ensure every aspect was considered to provide you with the highest quality and best performance. Through innovative design with the focus on performance, these suspension systems are the best-riding lift kits on the market, period—built to ride, handle, and tackle off-road obstacles with ease! Here are details for Kit 152650BK: Give your truck the off-road look you desire with Belltech's new Ford Bronco Sport 1.5 in. Lift Kit. It allows the ideal amount of lift to add larger wheels to your vehicle, which not only improves its appearance and capability, but can also provide increased traction and grip while driving. This product was designed with straightforward installation, making for a quick and simplified change to your Ford. Included in the lift kit, are custom-designed, adjustable end links which are zinc coated to prevent rust. The end links ensure your OE sway bar does not make contact with any parts of your vehicle in its newly modified condition. To provide lift, the kit includes front strut spacers (which attach directly to the top of your OE front struts) and coil spacers for the rear. To maintain proper suspension geometry and keep your wheels centered within the fenders, this kit includes rear trailing arm drop brackets. All components are powdercoated to prevent rust and reduce wear. Furnish your new Ford with a unique look that will last with the new Belltech Ford Bronco Sport 1.5 in. Lift Kit.

Not Yet Reviewed

$6,201.00

$5,270.85

ReadyLift Suspension SST Lift Kits

ReadyLift SST lift kits are the perfect solution if you want to add a little lift. They are the first-ever mild lift kits that allow you to use larger wheel and tire combinations, while keeping that smooth OEM ride and drivability. ReadyLift's "Smart Suspension Technology" is used to make these kits very user-friendly to install and they require no cutting.

4.5 out of 5 stars ( 12 )

$5,499.95

2025 Parts and Accessories