Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
2023 Tools & Shop Equipment
Showing In Stock Items. Show All 81 Items.
Summit Racing™ Cam Bearing Installation Tools
Remove old cam bearings and install new ones like a professional with our Summit Racing™ cam bearing installation tools. These kits contain an arbor with the drive mount, drive spools, spool stabilizers, and a drive cap. Even if it's your first time installing cam bearings, the instructions will walk you through the process with success.
( 198 )
$83.99
Summit Racing™ LS/LT Engine Lift Plates
Summit Racing™ LS./LT engine lift plates assist you with removal and installation of your engine. Made from 1/4 in. thick steel, our super strong lift plates are specifically designed for the Late Model Gen 3,4,5 LS and LT Series GM engines. These bolt in place of the valley cover and feature three lifting points for balanced engine weight or offset for angling engine with transmission attached. Let us give you a hand in the garage with our Summit Racing™ LS/LT Engine Lift Plates.
( 6 )
$71.99
Summit Racing™ Flywheel Holding Tools
Summit Racing™ flywheel holding tools stop your engine from rotating while you work. Simply bolt the tool in place and it securely locks the engine so you can begin removing or installing flywheels, clutches, flex plates, harmonic dampers, and harmonic damper bolts. Summit Racing™ flywheel holding tools are designed to work with the engine in the vehicle or on a stand.
( 12 )
$46.99
Summit Racing™ Engine Lift Plates
These Summit Racing™ Engine lift plates make lifting, moving, and storing your engine a snap. They mount to the intake manifold or intake bolt holes for secure lifting, and offer multiple lift points to help balance the load. The lift plates also block intake ports and the valley where applicable to protect the motor for storage. The Summit Racing™ engine lift plates are fabricated from heavy gauge steel and powder coated for a durable finish.
( 15 )
$88.99
Summit Racing Equipment® EZ Pushrod Length Checkers
Summit Racing Equipment's® patented EZ pushrod length checkers make finding correct pushrod length a snap ... literally! Simply loosen the set screw, tighten the rocker, tighten the set screw, and remove the rocker. The pushrod is then at zero lash. Measure with a dial caliper and add the amount of required lifter plunger preload to get the perfect pushrod length. You'll attain accurate, consistent measurements--and no more counting rocker bolt turns! These stainless steel tools are a must for short travel lifters, and a Master Kit is available for professional engine builders. Order the lengths needed for your applications.
( 11 )
$99.99
—
$229.99
Summit Racing™ Valve Spring Compressors
Make between-rounds valve spring changes quickly and easily with these Summit Racing™ valve spring compressors. With multiple styles to choose from we're sure to have a spring compressor to suit your needs.
( 313 )
$99.99
Lisle Injector Seal Installer Kits
Lisle injector seal installer kits are used for replacing PTFE seals on most Hitachi, Bosch, Continental, and Delphi single and double sealed fuel injectors found on many Ford, GM, and Subaru engines. These kits also work on many Ford ECO injectors with direct injectors. The pilot cone is placed onto the end of the injector, and the seal is started over the cone. The installer is used to push the seal over the remainder of the cone and into the groove on the injector tip. The sizer is then placed over the seal to compress it back to the correct OD to allow installation into the cylinder head. Lisle injector seal installer kits include eight pieces—five different seal stretchers, two resizers (one for Ford), and a seal pusher. Everything is contained within a sturdy case. Add a kit to your tool arsenal. Kit contents: * Seal pusher * Injector seal resizer for Ford .312 * Injector seal resizer .310 * Seal stretcher .160 * Seal stretcher .250 * Seal stretcher .330 * Seal stretcher .408 * Seal stretcher .430
( 3 )
$47.99
Summit Racing™ 2-Piece Engine Dollies
Summit Racing™ 2-piece engine dollies or stands are constructed from heavy-duty, high-quality steel tubing and feature 3 in. casters. They're designed to hold 850 lbs. and come with a black powdercoat finish. The stands are ideal for engine rebuilds, swapping, prep before installation, and more. Models are available for different engine types; select the stand best-suited for your needs.
( 79 )
$102.99
Summit Racing™ Pro LS Main Cap Pullers
Summit Racing™ Pro LS main cap pullers are built to quickly pull off main bearing caps from GM LS Series V8 engines, especially those with main studs. The tool's design allows you to remove caps in one easy motion, saving time and hassle. If you're in an automotive shop that regularly works on high performance GM engines, a Summit Racing™ Pro LS main cap puller is a must-have.
( 8 )
$205.99
COMP Cams Camshaft Phaser Sockets
COMP Cams' 7.3L Godzilla cam phaser socket tool (5475) is required to remove the camshaft phaser bolt on Godzilla engines. For those DIYers looking to upgrade the camshafts on the 7.3L Godzilla, this socket has proven difficult to find. The sturdy 16-point, 22mm socket is made to fit a 1/2 in. drive ratchet.
( 2 )
$32.95
Summit Racing™ Camshaft Installation Handles
Our Summit Racing™ camshaft installation handles for GM LS and Chevy V8 and 90 degree V6 engines feature a hex design that provides a solid grip for camshaft installation and removal. Choose from the economy handle for the early Chevy V8 or the deluxe handle that works on Gen III/IV LS engines and also Chevy V8's.Installation bolts are not included on deluxe model.
( 42 )
$42.99
SPC Performance Sleeve Pullers
These SPC Performance sleeve pullers are designed to remove rusted or seized bushings. They have been specially manufactured to work with offset or angled bushings and their single-head style eliminates breaking the ears off of the sleeve. Available for most 4-wheel drive trucks, these SPC Performance sleeve pullers will help you with your vehicle's alignment.
( 1 )
$124.99
—
$146.99
McGard Spline Drive Lug Nut Sockets
McGard's spline drive lug nut sockets are must-haves when using McGard's spline drive lug nuts to keep your wheels on your ride, where they belong. These sockets have a no-compromise patented design that's engineered to fit small-diameter recesses in new tuner-style wheels.
( 25 )
$13.99
—
$22.99
EZ4X4 EZRolling Door Carts
Roll and store your Jeep's doors with complete security and confidence using EZ4X4 EZ Rolling door carts. Doors are expensive and can become damaged when storing on the floor or leaning against the garage wall. With the EZ Rolling Door Cart home storage has never been more complete. Doors are secured on protective surface while the security hardware accepts the T-50 bracket to hold doors on the cart just like they were secured on the Jeep. Overtop adjustable lockers keep doors from bouncing out of place when the cart is being rolled to its storage location and locking caster wheels prevent the cart from moving once in secure a location. The durable lightweight aluminum EZ4X4 EZ Rolling carts, when not in use, fold in half, so they can go on vacation or travel with you to ensure a safe and convenient doors-off anywhere experience.
( 1 )
$349.99
SPC Performance Truck/SUV Ball Joint Presses
These SPC Performance truck/SUV ball joint presses are designed to remove old, worn-out ball joints and install new ones. They feature a forcing screw press and adapters that can easily install all press-in style ball joints. The presses include a handy plastic carrying case that is perfect for storing them when not in use.
( 3 )
$206.99
P-Ayr Products Replica Short Block Engines
P-Ayr replica short blocks are designed to bolt into your car in place of your real engine for test fitting parts. They include all of the necessary mounting holes with steel threaded inserts so you can mock up your new high performance parts. P-Ayr uses steel inserts for all bolt holes, and all specifications are held to OEM tolerances. You can bolt any factory component or accessory to a P-Ayr engine and it will fit. Made from durable polyurethane foam they have steel inserts for easy mounting.
( 9 )
$454.99
—
$648.99
COMP Cams Valve Spring Compressor Tools
Removing valve springs means working within a small space--a place where some tools are incapable of reaching. COMP Cams valve spring compressors enable you for effortless removal in these areas. Their tools allow you to work with either one or two valve springs at a time, without the hassle of first having to remove the rocker stand or any of the other installed rocker arms. They can be used on all GM Gen III/IV LS-type engines, as well as, small block Chevy and Ford engines with the cylinder heads on or off. A simple design with big time-saving results; choose the completely capable COMP Cams valve spring compressors for hassle-free removal.
( 85 )
$160.95
Lisle GM Caster Camber Kits
Lisle GM caster camber kits include a cam adjusting holding tool to adjust the upper control arm cams found on Chevy and GMC vehicles. The holding tool surrounds the entire perimeter of each cam to provide a no-slip work area when moving the hard-to-reach and often rusty OEM cams. The 14 1/2 in. 21mm wrench can be conveniently used from the bottom side of vehicle, instead of reaching through the wheel well, which saves technician's time.
Not Yet Reviewed
$81.99
McLeod Clutch Alignment Tools
McLeod clutch alignment tools allow you to accomplish the tricky task of aligning your clutch disc between the pressure plate and flywheel before the pressure plate is bolted down. Save yourself time and frustration--use McLeod's clutch alignment tools to ensure that everything is properly lined up for a smooth, hassle-free installation.
( 10 )
$4.95
Lisle Serpentine Belt Stretch Tools
Lisle serpentine belt stretch tools are designed for removal and installation of most stretch belt applications found on many accessory drive systems. They feature unique magnetic faces which hold the belts in place on the pulley. These tools help prevent damage to both the belt and the pulley during removal or installation, and they can be used on the front or back side of the pulley. Select the one designed for your application.
( 5 )
$18.99
ATI Crankshaft Pin Drill Fixture Kits
ATI Performance Products crankshaft pin drill fixture kits are designed to pin the crankshaft for high-rpm, supercharged, turbocharged, or high-horsepower nitrous oxide engines. They include a billet aluminum black-anodized drill fixture, a hardened 11/64 in. drill bit, an alignment tool, and pins for the crankshaft.
( 28 )
$131.02
Summit Racing™ Mockup Replica Blocks
Summit Racing™ Mockup Replica Blocks are light-weight and ship disassembled for ease of shipping and storage. The individual panels are easily assembled with tabs and slots for superior rigidity and accuracy compared to bolt-together types. Steel resists the heat from welding, so custom motor-mounts can be fabricated right on the block.
( 16 )
$307.99
SPC Performance Cam Extractor Presses
SPC Performance cam extractor presses are used to remove OE cam sleeves from Toyota trucks. They allow you to remove the sleeve without removing the steering rack. Made out of high-quality materials to ensure long-lasting performance and durability, SPC cam extractor presses are great at helping you save time.
Not Yet Reviewed
$157.99
Holley Crankshaft Seal Installation Tools
Holley crankshaft seal installation tools keep the seal straight and square during installation, eliminating seal damage. Featuring diecast aluminum construction, the seal installation tool is to be used along with a standard harmonic balancer installation tool to properly install the crankshaft seal in the timing cover. These special tools from Holley are available for your Gen III Hemi or 7.3L Godzilla engine. Choose the one for your engine. Holley installation tools are available to: * Work with Holley Gen III Hemi mid-mount accessory drive systems and stock factory timing covers * Work with 7.3L Godzilla engine and Holley and stock factory timing cover
( 1 )
$25.33
—
$25.61
