Availability
Showing In Stock Items. Show All 9 Items.
Bilstein B8 6112 suspension kits are for those seeking serious off-road action to carry them over the terrain. Each of their B8 kits will optimize the off-road capabilities of your rig with a 60mm digressive piston for increased damping control, specially designed cold wound springs, and an adjustable spring seat, which allows for vehicle leveling, larger tires, and increased ground clearance. They are a direct bolt-on for many applications and utilize the OEM top mount and spring isolators. Are you searching for the ultimate solution to your off-road adventures? One of these Bilstein B8 6112 front suspension kits will be the definitive answer.
( 11 )
$885.00
Adjust camber and caster for maximum handling and performance with these control arms by SPC Performance. These control arms allow for changes when fine-tuning suspension alignment angles. They're available for a wide variety of applications, such as street rods, sport compact, muscle cars, performance vehicles, and race cars. Fine tune your suspension with SPC Performance control arms.
( 168 )
$895.99
Old Man Emu BP-51 coilovers deliver high performance shock absorption for the front of your vehicle. Preloaded with Old Man Emu coils, these revolutionary coilovers are set to the appropriate lift height for vehicles fitted with a bumper and winch. The spring preload will need to be adjusted to compensate for a lighter total weight vehicle. But, of course, OME BP-51 coilovers provide the independent adjustability of both rebound and compression to deliver the ultimate in both comfort and control, on or off-road. Inside and outside features of Old Man Emu BP-51 coilovers: * Body, reservoir, and components are crafted from 6061 T-6 aluminum * Type 3, 40 micron hard anodized finish * High-quality X5K grade steel coil * High-flow fittings with -6 high-temperature PTFE hose * Large PTFE-lined spherical bearings * High-pressure nitrogen reservoir with aluminum, anodized floating piston * Adjustable spring preload/ride height * 19mm hard chromed ground shaft * Quality oversized rubber bushings * High-temperature Viton® and PTFE seal pack * 51mm bore diameter body * Patent pending bypass, shim controlled, position sensitive damping * High performance, high-viscosity index oil * 1900 MPA polished, high-strength, high-fatigue shims * Kidney bypass ports * Multiple compression and rebound bypass zones
Not Yet Reviewed
$949.95
VEGE Remanufactured cylinder heads are a popular choice for performance and value. With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured cylinder heads with a level of quality that equals that of new OEM products—at extremely competitive prices. The rebuilt cylinder heads are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Unless otherwise noted, the assemblies include a cast iron or aluminum cylinder head, intake and exhaust valves, valve springs, retainers, locks, stem seals, rocker arm studs, and more. Many heads include rocker arms. Nearly a thousand models are available, for fitment on countless applications.
( 42 )
$799.99
Completely modular, the ARB Outback Solutions range of roller drawer systems can be individually tailored to your needs and vehicle. Exclusive to ARB and suitable for many vehicles—including SUVs, pickups, and trailers—these systems can also be used in non-vehicle applications such as sheds and warehouses. Three types of modules are available: roller drawer, roller floor, and roller drawer with roller floor. They're offered in a range of sizes, resulting in more than 200 possible configurations. Customize your vehicle or storage area! Additional product details: * Engineered for both on and off-road driving with anti-rattle design * Key lockable, push-pull slam shut latches for ease of use and maximum security * Long-lasting, UV-stable commercial carpet designed to complement modern vehicle interiors * Cross-folded floor ensures maximum support for items placed within each unit. Up to a maximum of 330 lbs. per drawer, 600 lbs. combined * Fully sealed, dust- and water-resistant bearings for superior longevity working in harsh environments * Integrated fridge slides on roller floor models provide a true flat mounting surface * Vehicle-specific side floor kit with easy latches completes installation and provides additional storage areas within the cabin or tray * Water-resistant bonded marine plywood with steel reinforced guards for superior strength sourced from sustainable forests * Folded stainless steel bearing runners for ultra-smooth drawer and slide operation * Self-locking anti-rollback system locks into place at full extension; this holds the drawer from rolling closed even on inclines * Modular units allow greater flexibility if needs change in the future * Class-leading deep drawers with internal heights up to 9.8 in. for greater packing potential
( 1 )
$866.00
—
$1,050.00
ARB skid plates are just the thing for protecting your rig from that challenging off-road terrain and unexpected obstacles that cause the most damage beneath your vehicle. The skid plates are designed to shield all of your vehicle's vital underbody components from end to end—to ensure that your steering, oil pan, tranny, and transfer cases will all be safe during every trail adventure. You're "rock ready" with ARB bolt-on skid plates! Additional features and details of ARB skid plates include: * Manufactured from laser-cut steel, zinc plated with a powdercoat finish * Press-formed and expertly folded for optimum strength to weight * Recessed mounting bolts and openings or easy-to-remove panels—so your vehicle can be easily serviced * Skid plates are model-specific; order the one designed for your vehicle
( 3 )
$956.00
ARB roof racks are valuable and versatile accessories. ARB manufactures both steel and aluminum models in a variety of lengths and widths to suit a wide range of vehicle types. Both ARB styles are researched, designed, and tested to ensure functionality in the most demanding of conditions. With a strong, aerodynamic design, ARB steel roof racks are constructed for maximum strength and perfectly suited to the structural design and load carrying requirements of off-roading. They feature MIG welded joints to ensure optimum strength, and are available with evenly spaced crossbar floor that can support loads of up to 330 lbs., or with a fully welded steel mesh floor. Prefer something lighter? A full 40 percent lighter, ARB aluminum roof racks offer the ideal solution for carrying excess or bulky items, with all of the durability, strength, and load rating of their steel models. They are perfectly suited to owners who may wish to remove their rack between trips. They come with Amplimesh alloy mesh floors, and a combination of TIG and CMT welding processes are used to ensure optimum rack strength. All ARB roof racks feature: * Rails are mandrel-formed, ensuring consistency and an even wall thickness across all sections * Air deflector plate significantly reduces wind noise * Pressed steel feet and legs are height and width adjustable, allowing multi-vehicle installations * Stainless steel fitting hardware and a unique, super-strong clamping system that's easy to install and remove * Full-length, zinc annealed steel support channel with plastic protection strip to distribute load along the gutter and prevent vehicle damage * Precision-cut drainage channel, specifically-designed to reduce buildup of dirt and accumulation of moisture * Top rail sits well above rack floor to ensure a secure load and is constructed from tough, 25mm tube while the bottom rail utilizes 35mm tubing
( 1 )
$828.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
