Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Summit Racing™ Ecoboost Turbo Manifolds
Summit Racing™ is proud to offer Ecoboost turbo manifolds for the 3.5L Ecoboost engines. The factory manifolds are known for warping, cracking, and then leaking when used under heavy loads. Our upgraded stainless manifolds are much heavier than the lightweight factory versions and they flow better which improves exhaust flow and lowers back pressure, allowing the turbos to spool quicker. Since they must be replaced you might as well gain some power and mileage. Check out these features below: * Cast in high-strength and corrosion-resistant CF8 (304) stainless steel * Extra thick flanges have higher resistance to warpage and cracking * Individual runner into collector design with over 60 percent more internal volume * Port matched outlet with integrated gasket anti-extrusion ring provides 37 percent increase in outlet flow area * Additional bolt hole provides three studs for each exhaust port * Direct bolt on with no additional modifications or parts required
Not Yet Reviewed
$799.99
Summit Racing™ OE Replacement Turbochargers
Summit Racing™ OE replacement turbochargers are the best choice to replace your worn out, leaking, or failed original equipment units. With more and more vehicles coming turbocharged from the factory, the reality is that most turbos start leaking or the bearings wear out long before the life of the car or truck does and will need to be replaced. We are proud to offer these replacement turbos for various applications, choose the right one for your car or truck. Check out these features and benefits: * 100 percent brand new construction * Direct-fit left and right available * EM spec-cartridge and turbine wheel * OEM spec-housings on brand NEW tooling: tighter tolerances and better finish * Billet compressor wheel with revised and updated Aero: more torque over OEM and OEM replacements * OEM spec rotating assembly for hassle-free operation and longevity * OEM spec oil feed/drain and coolant inlet/outlet: plug-and-play with your existing oil and coolant lines * Increase horsepower, torque, and fuel efficiency over worn OEM turbochargers
( 6 )
$649.99
Summit Racing™ Engine Lift Plates
These Summit Racing™ Engine lift plates make lifting, moving, and storing your engine a snap. They mount to the intake manifold or intake bolt holes for secure lifting, and offer multiple lift points to help balance the load. The lift plates also block intake ports and the valley where applicable to protect the motor for storage. The Summit Racing™ engine lift plates are fabricated from heavy gauge steel and powder coated for a durable finish.
( 19 )
$88.99
Summit Racing™ Turbo Coolant Line kits
Summit Racing™ turbo coolant line kits provide a quality engineered solution in one box to replace or upgrade your coolant lines when replacing your turbocharger.
Not Yet Reviewed
$249.99
Summit Racing™ VTA Blow-Off Valve Adapters
Summit Racing™ VTA blow-off valve adapters allow you to vent your hot boost to the atmosphere instead of recirculating it back into the intake stream. This improves throttle response on shift recovery and reduces turbo lag. Oh yeah, it also makes that cool blow-off valve sound when you let off the gas! Order one that fits your vehicle today. * Requires no other modifications or calibrations * Billet aluminum construction * Easy, direct bolt-on installation * Vent to atmosphere for cool blow-off sound * Black powdercoat finish for protection * Ideal for applications such as Ford F-150 EcoBoost vehicles, 2013 and up
( 1 )
$99.99
Summit Racing™ Extreme Performance Coated Brake Rotors
Summit Racing™ offers Extreme Performance coated brake rotors for thousands of vehicles, from the 1960s and up. They're manufactured on CNC machines using CAD-CAM design for perfect balance and alignment, then coated with silver zinc to resist corrosion. These rotors provide you with maximum stopping power, reduced warping, and longer life. The cross-drilled holes and slots provide an exit route for gasses and dust, resulting in better heat dissipation and less brake fade under hard use. Other solid-surface rotors allow gasses to create a cushion between the pad and the brake rotor, resulting in poor brake performance. The cross-drilled holes and slots clear away harmful gasses, restoring full pad-to-rotor contact. These coated rotors are a terrific performance upgrade when replacing your brakes. Order the model recommended for fitment on your vehicle.
( 57 )
$169.98
—
$219.98
Summit Racing™ Turbo Installation Hardware Kits
Summit Racing™ turbo installation hardware kits provide the hard-to-find factory-style gaskets, studs, and hardware you need when replacing your factory turbos. Select the kit needed for your application.
( 1 )
$229.99
Summit Racing™ 7.3 Godzilla Oil Cooler Bypass Plates
Summit Racing™ 7.3 Godzilla oil cool bypass plates eliminate bulky block mounted oil coolers that tend to get in the way when performing engine swaps. Our plates are machined from billet 6061 T-6 aluminum and include a stainless steel 1/2 in. NPT port plug.
( 3 )
$55.99
—
$178.99
Summit Racing™ 2-Piece Engine Dollies
Summit Racing™ 2-piece engine dollies or stands are constructed from heavy-duty, high-quality steel tubing and feature 3 in. casters. They're designed to hold 850 lbs. and come with a black powdercoat finish. The stands are ideal for engine rebuilds, swapping, prep before installation, and more. Models are available for different engine types; select the stand best-suited for your needs.
( 79 )
$102.99
Summit Racing™ Tri-Fold Tonneau Covers
Summit Racing™ Tri-Fold tonneau covers allow you full truck bed and cargo coverage when you need it, and fold back to provide open bed space when hauling larger loads. These tonneau covers are made with heavy-duty, tear-resistant vinyl and come fully assembled to offer easy installation, no special tools required. Additional features of Summit Racing™ Tri-Fold tonneau covers include: * Constructed of industrial-grade vinyl * Durable black powdercoated aluminum frame * Weather-resistant EPDM rubber seals * Simple-to-use clamps with large wing nuts for easy installation; just line up the tonneau cover, fasten the quick-clamps, and you're ready to roll in minutes
( 20 )
$258.99
—
$545.99
On Sale
Summit Racing™ Rollup Tonneau Covers
Summit Racing™ roll-up tonneau covers offer great looks and an affordable price. They're crafted from heavy-duty strength vinyl with sturdy aluminum rails, and their secure hook and loop attachment provides easy-to-fasten, unbroken contact between the rails and covers. The preset tension control keeps your cover smooth and aerodynamic, and your rig fuel-efficient. Of course, installation is easy--no drilling or cutting is required. And operation is even easier--you can roll them up in seconds, by yourself. Product highlights and features: * Heavy-duty tear- and weather-resistant vinyl cover * Multi-tiered hook-and-loop fasteners hold firm in all conditions * Integrated structural support rods prevent sagging, pooling, and flapping * Low-profile design for sleek styling * Complete bed access when transporting oversized cargo * Adjustable tension control system * Nylon straps included to secure the cover in the open position while driving * Simple, no-drill installation
( 33 )
$189.99
$169.50
Summit Racing™ Inconel Exhaust Stud Kits
Summit Racing™ Inconel exhaust stud kits are offered to work with our EcoBoost Turbo manifolds or as a replacement for the often-broken factory studs. Made from unbreakable A286 Inconel, these M8 x1.25mm, high-nickel stainless steel studs are corrosion-resistant and will withstand the high temperatures of turbocharged exhaust. Never break another exhaust manifold bolt again! Each kit includes 18 studs and nuts for use with manifolds that include an extra mounting hole.
Not Yet Reviewed
$169.99
Summit Racing™ 5-Layer Custom Car Covers
Summit Racing™ 5-layer custom car covers are available to shelter a range of vehicles from classic and modern muscle cars to Jr. Dragsters and Teslas. Featuring all-weather fabric for indoor and outdoor use, our covers have a multi-layer, non-woven construction with a polypropylene outer, an inner moisture barrier, and a soft Spunlace inside lining to protect fine paint finishes. Choose the proper fit for your vehicle from the Summit Racing™ 5-layer custom car cover selection available. Additional features: * Excellent protection in all climate conditions * Sewn in the USA with the highest quality standards * Increased strength and dust protection * Ding protection, high UV protection, and excellent moisture resistance
( 25 )
$241.99
Summit Racing™ Rear Window Louvers
Summit rear window louvers will give you a dose of the late '60s/early '70s flavor, plus privacy and sun protection. Choose from black-painted aluminum, UV-resistant textured black ABS plastic, and ready-to-paint smooth ABS plastic (depending on the application). Whichever you choose, they install quickly using steel mounting plates with pre-applied adhesive, which allows you to remove the louvers to clean the window.
( 203 )
$498.99
Summit Racing™ Cut and Clamp Resonator Delete Kits
Summit Racing™ resonator delete pipe kits give your Mustang a more aggressive exhaust note and increase horsepower and torque. These kits are an affordable way to replace the restrictive factory mid-pipe resonator on your 2015-later Mustang to reduce back pressure and increase exhaust flow. They also weigh less than the factory resonator and are fairly easy to install. Summit Racing™ delete pipe kits are available with "X" or "H" pipe designs in mild or stainless steel. Kits install after the factory catalytic converters and clamp in place after removal of the resonator.
( 30 )
$190.99
—
$217.99
Summit Racing™ Engine Swap Motor Mounts
Summit Racing offers engine swap motor mounts for a variety of applications, from the 1980s and up. The complete mounts include steel brackets with a black powdercoat finish and bolt-in hardware required for installation. Secure your engine properly; order the set of mounts recommended for your project.
( 8 )
$105.99
—
$225.99
Summit Racing™ Mustang Rear Cradle Lockout Kits
Summit Racing™ Mustang rear cradle lockout kits stiffen your suspension by locking the rear IRS cradle firmly to the body, eliminating wheel hop and cradle movement during hard launches. These kits use factory hardware and come with new lower bushing support washers. Improve your launches and handling with a simple bolt-on solution—a Summit™ rear cradle lockout kit.
Not Yet Reviewed
$203.99
Summit Racing™ Extreme Duty Head Stud Kits
Summit Racing™ Extreme Duty cylinder head stud kits are engineered to withstand the stress and abuses that high-horsepower engines endure. These fastener kits come with all necessary studs, nuts, washers, lubricant, and instructions to ensure maximum performance and reliability. Order the hardware recommended for your year/make and engine application. Extreme Duty fasteners feature: * 190,000 psi tensile strength minimum * High-strength chromoly steel utilized for all products * Precision manufacturing processes ensure consistent product performance * All studs are twice straightened to guarantee straightness * Threads are rolled after heat treatment for high strength * Tensile and yield strength tested after thread rolling * Uniformly applied black oxide surface finish * Anti-rust oil coating to protect fasteners from corrosion
( 2 )
$516.99
Summit Racing™ Mockup Replica Blocks
Summit Racing™ Mockup Replica Blocks are light-weight and ship disassembled for ease of shipping and storage. The individual panels are easily assembled with tabs and slots for superior rigidity and accuracy compared to bolt-together types. Steel resists the heat from welding, so custom motor-mounts can be fabricated right on the block.
( 16 )
$307.99
Summit Racing™ Billet Vented Oil Fill Caps
Summit Racing™ billet vented oil fill caps provide an easy solution to vent your engine to an oil separator or catch can. They install into the valve cover like a standard oil fill cap and feature a baffled -10 ORB or -16 ORB internal port, allowing you to plumb a hose directly to the catch can or tank without ever having to modify the valve covers. Machined from billet aluminum, the screw-in or twist-in caps are available with a black anodized or natural mill finish.
( 8 )
$26.99
Summit Racing™ Step Bars
Don't think you can get quality, heavy-duty step bars at a reasonable price? Think again. Our Summit Racing™ step bars deliver durable construction and attractive styling at an amazingly affordable price. They're available with a polished, or black powdercoated finish (depending on the application). Summit Racing™ step bars feature recessed step pads to provide sure footing, and an easy, no-drill installation.
( 190 )
$102.84
—
$160.99
Summit Racing™ Door Storage Hangers
Removing the doors from your Jeep or Bronco on a nice day is an awesome way to go off-roading, run around town, or down to the park or beach. But safely storing those doors is not the easiest thing to do. Putting them on the floor can lead to paint or moisture damage, and leaning them against each other can harm them as well. Summit Racing™ Door storage hangers allow you to hang your doors up off of the ground at the height of your preference. Each hanger safely holds a pair of doors by the hinges as if mounted on the vehicle. They need to be mounted to wall studs on 16 in. centers for a solid, secure mount. When it comes to your doors, keep them looking nice and hang them around with Summit Racing door storage hangers.
( 8 )
$102.99
Summit Racing™ Race Series Rod Bearing Sets
Summit Racing™ offers Race Series rod bearing sets for a wide range of applications—including many Chevrolet, Buick, Ford, Ram, Jeep, Dodge, Chrysler, and Plymouth small block, big block, and Hemi engines from 1955 and up. The bearings provide a low-friction pivot point between the connecting rod and the crankshaft, and the connecting rod and piston. They keep the crankshaft and connecting rod in place as they rotate. These performance replacements are machined from tri-metal copper-lead alloy and are available in numerous engine crankshaft undersize options. Order the set recommended for your vehicle.
( 3 )
$83.99
Summit Racing™ Extended Life Oil Filters
Summit Racing™ extended-life oil filters keep your engine free from contaminants. Our canister-style filters feature proprietary synthetic filter media that offers high filtration and low restriction—longer. These economical oil filters deliver up to 10,000 miles of engine protection. Order the model recommended for your vehicle and engine application. Summit Racing™ extended-life oil filters feature: * Durable 0.5mm thick steel canister for withstanding high operating pressures * High-capacity can design for trapping and holding dirt * 98 percent multi-pass particle removed efficiency * High-quality pressed steel baseplate * Silicone sealing gasket * Roll-tap formed threads to help prevent vibration fatigue * Silicone anti-drain-back valve that protects engine during start-up * Filter bypass relief valve if filter media becomes blocked * Textured powdercoating to ensure durability and deliver enhanced grip * Protective film over filter opening to prevent debris from contaminating filter prior to installation
( 46 )
$7.99
