Availability
Showing In Stock Items. Show All 34 Items.
Ford Performance Parts camshaft drive kits include all of the components that you need for proper timing. They're offered in numerous packages for a variety of applications and include high-quality production components for increased durability. Depending on vehicle, kits may include new production: * Tensioner arms * Chain guides * Primary and secondary timing chains * Primary and secondary timing chain tensioners * Camshaft sprockets, spacers, bolts, and washers * Camshaft VCT phasers and bolts * Crankshaft sprockets, spacers, and washers * Crank position trigger wheel * Dowel pins and fasteners
( 48 )
$678.99
Cam Motion lifters are available to fit your desired level of performance and budget. From economical stock replacements to their High Performance, Racing, and Premium lines of lifters, Cam Motion covers many applications. Their Premium hydraulic roller lifters feature cold-forged steel construction, precision-ground needle roller bearings and extra-long pistons, precision oil metering, and high-flow, quick-reacting check valves. Cam Motion lifters are available in factory tray/retainer-styles and tie bar-styles.
( 8 )
$603.35
On Sale
COMP Cams HRT Stage 1 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles designed to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. COMP Cams HRT camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250 percent improvement in the effective load bearing area, allowing for much higher loads. All HRT Stage 1 camshafts do not require upgraded valve springs.
( 1 )
$579.95
—
$605.95
$521.96
—
$545.36
If you're rebuilding or servicing your 5.2L Predator engine, these camshaft finger followers are direct-fit OEM replacements from Ford Performance Parts. The kit contains 32 followers for the 2020 Shelby GT500 Mustangs—and can also serve as a bolt-on upgrade for the 2015-20 GT350 or the Gen 3 2018+ GT Coyote cylinder heads. Features and benefits: * Higher strength wheel and bearings * Premium design and high-strength materials make these a durable part for your modular engine * These are genuine Ford Performance parts, so they will be a direct-fit replacement for your originals * Durable steel construction
Not Yet Reviewed
$610.99
On Sale
COMP Cams Thumpr NSR Hemi Gen III/IV camshafts bring the wildly popular Thumpr sound to late model Hemi engines, while offering big power gains and no need to upgrade valve springs. The cams are made from billet steel cores for increased strength—and require no springs for a far easier installation. Great in naturally aspirated or supercharged applications, COMP Cams Thumpr NSR Hemi Gen III/IV camshafts provide excellent performance in mid- to upper-rpm ranges. Order the model designed for your vehicle and engine application.
Not Yet Reviewed
$605.95
$545.36
BTR camshafts are designed for excellent performance and great drivability. Brian Tooley Racing offers a large number of camshafts and combinations to fit many applications for trucks and cars. Numerous grinds for turbo, supercharged, and naturally aspirated combinations are available for your project, all backed by years of experience, knowledge, and a passion for power.
( 14 )
$569.99
COMP Cams Evolution Series hydraulic roller lifters with Hydraulic Cartridge Technology (HCT) are revolutionary patented tappets. A combination of a self-contained hydraulic cartridge within a thick-wall lifter body and accompanying reduced oil volume that is less effected by oil aeration delivers the most consistent bleed rates between each lifter on the market. The smaller volume within the hydraulic cartridge creates one of the most responsive and quietest lifters on the market today. Startup noise is greatly reduced, and a precision-controlled bleed down rate ensures excellent performance at high RPM. The cartridge design also allows for an incredibly stiff lifter body, greatly reducing body distortion and further ensuring consistent hydraulic performance. The patented HCT tappets are a completely new design that was developed specifically by COMP Cams to meet the demanding performance and durability required for modern street and performance street engines. The HCT and proprietary manufacturing processes of these lifters ensure precision and longevity that exceed any lifter on the market. Other features include increased duration and lift to the camshaft and two oiling features. Another industry first is the fact that the hydraulic element of this patented lifter is serviceable, allowing anyone to rebuild lifters in his or her own garage. Order the Evolution lifters recommended for your year/make and engine application.
( 12 )
$646.95
On Sale
COMP Cams Xtreme fuel injected camshafts are designed for late model applications. Ground using faster-opening and more efficient ramp profiles, Xtreme camshafts are engineered for 1.6 ratio rocker arms and beehive valve springs, which provide a dramatic increase in torque and horsepower.
( 29 )
$579.95
$521.96
Melling M-Select Class 1 camshafts are part of their full line of high performance camshafts graded from Class 1 to Class 4. Class 1 camshafts have durations of 200 to 215 degrees at .050 in. lift. They feature good idle quality with strong low-rpm torque and midrange performance. These cams will work well with stock or slightly modified engines with either manual or automatic transmissions. M-Select Class 1 camshafts may have lower vacuum than OE camshafts.
( 33 )
$502.99
On Sale
COMP Cams Chrysler Hemi phaser camshafts utilize Variable Valve Timing (VVT) technology to maximize power and performance in stock and street/strip applications. The new Hemi engines from Chrysler are great power plants straight from the factory, with technology that allows the camshafts to move in real time. Instead of scrapping this advanced system, COMP Cams has embraced it with a new line of aftermarket Hemi-specific cams. The patent-pending Hemi phaser camshafts work with phaser limiters or locks to fully utilize Chrysler's Variable Valve Timing (VVT) technology, which allows them to pick up torque in the low end of the engine, while maintaining power up high. Made from a billet core, these hydraulic roller cams are engineered tough enough to handle 5.7L and 6.4L Hemi street/strip engines. Their unique, no-springs-required design maintains piston-to-valve clearance, while enabling high performance lobes utilizing VVT, making them perfect for late model Dodge Challengers, Dodge Chargers, Chrysler 300s, Jeeps, Dodge trucks, and Mopar crate engines with VVT. COMP Cams Chrysler Hemi phaser camshafts are available as both custom and three different off-the-shelf grinds, dependent upon engine type, for improved performance over OEM options. They will require the COMP Cams phaser limiter or lock kits to limit the degree of maximum cam phasing to 14 crank degrees (7 cam degrees) and they are available separately.
( 5 )
$605.95
$545.36
On Sale
COMP Cams HRT Stage 3 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles engineered to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. COMP Cams HRT Stage 3 cams receive the Micro Surface Enhancement (MSE) finishing process as a standard feature to increase strength and performance by reducing surface peak roughness. This also provides noticeable improvement in the effective load bearing area, thus allowing for much higher loads. Order the model recommended for your vehicle and engine application.
( 1 )
$605.95
$545.36
On Sale
Comp Cams turbo and blower HRT camshafts are available in a variety of mild-to-aggressive styles. These replacement hydraulic roller tappet models work with your blower, turbo, or supercharger to help provide the most power possible. Choose the grind and options needed for your vehicle and engine application.
( 1 )
$605.95
$545.36
COMP Cams Godzilla hydraulic roller camshaft upgrades are designed to provide amazing drivability and throttle response, while producing increased torque across the entire RPM range with a significant horsepower bump with minimal effort. They're available in three distinct models: * Stage 1 NSR/NTR model: Utilizes the full phaser sweep for excellent mileage and optimized performance, without compromising durability. They requires no adjustment to the factory cam phasing or ignition timing without the need for a limiter. However, minimal ECU tuning may be required to meet the maximum potential. Testing with an optimized tune resulted in over 60 hp and 15 lbs.-ft. over stock with a much broader torque curve—impressive gains with minimal effort and zero compromise. * Stage 2 NSR model: Maintaining use of the phaser with a limiter kit allows these camshafts to also produce incredible horsepower. They offer maximum torque in the low- to mid-range for heavy vehicles and towing. Stage 2 cams deliver an increase of over 75 lbs.-ft. of torque at 3,000 rpm! They require a phaser limiter (P/N 5473). Testing with the phaser limiter kit resulted in gains of more than 75 hp over stock. One look at the torque curve produced by this camshaft will have your tires crying for mercy. * Stage 3 model: Godzilla Stage 3 camshafts are made for crate engines and engine swaps into lighter vehicles and those seeking maximum horsepower while still utilizing the phaser with a limiter kit. These cams bring the exhaust note that is worthy of the Godzilla name. They will produce well over 600 hp on pump gas! Awesome power can be expected, from 5,000 to 6,700 rpm with the valve spring kit (P/N 7230GCS-KIT) and a phaser limiter (P/N 5473). Testing with the phaser limiter kit resulted in gains of nearly 100 hp and 25 lbs.-ft. over stock. This much horsepower will make even Godzilla fly.
Not Yet Reviewed
$677.95
These cone-shaped springs from COMP Cams are for high performance street applications where the heads are not removed and machined for larger springs. The springs will work without any modifications. The kits also include retainers, locks, and seals.
Not Yet Reviewed
$604.95
S&S Cycle roller rocker arms were designed for superior strength and to eliminate the failure-prone stress areas found in other rockers. These replacement arms are forged from 8620 steel, heat-treated, and then shot-peened for additional strength. They feature 3/4 in. long bronze bushings, compared to the more common 1/2 in. long bushings or needle bearings. S&S Cycle roller rocker arms are available in 1.500:1 ratio, 1.625:1 ratio and 1.725:1 ratio. Order the set recommended for your bike model.
Not Yet Reviewed
$611.95
—
$652.95
Holley Gen III Hemi timing covers are offered in two finishes for your mid-mount accessory drive system. Available for Hemi engines with or without VVT, these covers are the correct replacements for those originally supplied in your Holley complete accessory system. They will provide the perfect fit and expected performance to service your system. Choose the Gen III Hemi timing cover required for your setup.
Not Yet Reviewed
$518.95
—
$573.95
BTR Platinum valve spring kits are dual-spring kits, highly recommended when upgrading to an aftermarket camshaft. Each assembly was created to fill the need for high performance—and comes with quality dual-valve springs, titanium or chromoly retainers, locks, seals, and locators for stock or bronze guides. Build a better high performance cam with BTR valve spring kits! Order the material and stem seal color you prefer, and the model recommended for use with your engine application.
( 17 )
$549.99
Revolutionary COMP Cams XFI AFM GM Gen V camshafts are designed to work with the direct-injection, VVT (variable valve timing), and AFM (active fuel management) lifters featured in GM's Gen V (LT1/L83/L86) V8 engine. They feature four different lobe profiles to both create AFM compatibility and optimize intake and exhaust valve opening/closing events. The camshafts increase torque and horsepower throughout the entire rpm range, while providing excellent responsiveness and midrange power over stock for across-the-board gains. The COMP Cams XFI AFM GM Gen V camshafts require the COMP Cams phaser limiter kit (sold separately), which limits the range of camshaft movement from 62 to 22 crank degrees, thus requiring PCM tuning.
( 3 )
$574.95
On Sale
Summit Racing™ Dynamic Fuel Management (DFM) Delete Pro Packs are a necessary first step when performing other major engine modifications, such as installing an aftermarket camshaft. These Pro Packs offer benefits like eliminating lifter failure risks, providing consistent V8 power and throttle response, improving sound with performance exhausts, and simplifying upgrades by bundling necessary performance parts for the conversion. The Pro Packs are curated by Summit Racing™ experts, ensuring the included components, such as new lifters, lifter guides, head bolts, and valley covers, are specifically matched to work together, saving guesswork and helping to prevent installation surprises. Order the Pro Pack designed for your vehicle.
Not Yet Reviewed
$732.86
$729.86
On Sale
COMP Cams Stage 1 LST Series hydraulic roller camshafts deliver "Low Shock Technology." These LST cams feature lobe profiles designed to maximize horsepower, while improving stability at higher rpm. They're also easier on the valve springs, enhancing durability and reducing load loss. From street durability to track power, COMP Cams Stage 1 LST Series hydraulic roller camshafts are an awesome choice for your build. The cams are available for a variety of engine, piston, and engine applications.
Not Yet Reviewed
$574.95
Manley Extreme Duty Series performance steel valves are a great choice for supercharged, alcohol-burning, or high-revving engines. These engines generate a lot of heat and require special valves that can handle that kind of punishment. All valves are made from the best stainless steel available, with chrome stems and hardened valve tips. Extreme Duty Series valves are swirl-polished and fully machined and available with either undercut heads or straight stems.
( 2 )
$522.23
Lingenfelter Performance Engineering camshafts offer several camshaft profiles to fit your Chevy muscle. Their camshafts are produced from induction-hardened steel cores and are ground to their specifications for exceptional durability and long life. They're designed to maximize the power potential of your engine. Perfect your Chevy's performance with Lingenfelter Performance Engineering camshafts.
( 4 )
$512.95
PRW Pro Series stainless steel rocker arms are manufactured from lightweight, premium quality 17-4ph stainless steel—a superior alloy high in nickel and chromium. This rigid, premium material provides outstanding fatigue resistance, and high-yield strength to help resist deflection. These rocker arms feature full-cage, friction-reducing needle bearings, and extra-large trunnions to spread out the load and reduce wear. Each rocker body is hand-polished, assembled, and carefully inspected to deliver the finest quality available to the racing and performance industry. Reduce your valvetrain mass with durable, lightweight PRW Pro Series stainless steel rocker arms. Order the set recommended for your specific vehicle and engine size. Features, items, and specs: * Wide assortment of ratios to suit almost any cam profile * Each set of 16 comes complete with PRW RockerLocs * Stud-mount design provides plenty of clearance for large diameter springs * CNC-machined pushrod cups * Heat-treated steel nose rollers and shafts resist severity of racing and minimize scrubbing
( 8 )
$544.10
Take your engine's performance to new heights with PRW Elite Series stainless steel full roller rocker arms, are engineered for maximum strength, speed, and precision. They are built for serious racers and performance enthusiasts who demand superior control and durability. Precision engineered with Direct Oil Feed Technology, a tight-fit nose roller axle, and E-Coated stainless steel rocker bodies, this series delivers smoother motion, increased RPM potential, and unmatched long-term reliability under extreme conditions. Features: * Rated up to 1000 lbs. open spring pressure * Direct Oil Feed Technology for enhanced lubrication and performance * 25% narrower roller reduces valve-end mass for higher RPM response * Precision-machined nose roller axle for smooth, friction-free motion * 12-Point polylocks included for secure, hassle-free installation
Not Yet Reviewed
$580.58
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
