Availability
Showing In Stock Items. Show All 13 Items.
COMP Cams HRT Max Power Master camshaft kits take the guesswork out of choosing the right valvetrain-upgrade package to achieve your desired performance with your Dodge Gen III Hemi. These Max Power kits feature the "low shock technology" of COMP's HRT camshafts with lobe profiles designed to maximize horsepower and improve stability at higher rpms. The profiles are also easier on valve springs, enhancing durability and reducing load loss. By dyno testing with many combinations of valvetrain components, COMP Cams' engineers have created these more complete, perfectly matched engine camshaft packages for your Hemi application in three different stages of performance. COMP HRT Max Power MK-kits include: * HRT Cam * Lifters * Pushrods * Conical or Beehive springs * Steel retainers * Locks * Spring seats * Valve seals * Phase limiter (VVT Hemi kits only)
( 5 )
$1,839.95
On Sale
Wanting to deactivate the Multi-Displacement System of your Hemi vehicle will require a few things, including a non-MDS camshaft and components. Summit Racing™ Gen III Hemi MDS delete kits are offered in versions designed for engines with or without Variable Valve Timing (VVT). They contain premium components (except programmer) to help you complete the job. Each Summit Racing™ delete kit will include a head gasket set, timing cover gasket, non-MDS lifters, replacement cylinder head fasteners, non-MDS solenoid plug, and camshaft, along with valve springs and/or camshaft phaser limiters. Choose the combo designed for your vehicle.
Not Yet Reviewed
$1,587.80
—
$1,737.79
$1,517.21
—
$1,667.20
COMP Cams NSR Stage 1 HRT hydraulic roller camshaft and lifter kits are designed for a substantial bolt-in power increase. They help you avoid costly breakdowns and early retirement of your Hemi engine by maintaining Spintron-proven valvetrain stability high into the rpm range. These cams provide great throttle response, mid-range torque and excellent power; they're perfect for heavier vehicles. Each kit includes everything needed, such as lifters, valve springs, push rods, and seals. Order the model recommended for your application. Wake up that late model Hemi engine and go with the proven a COMP Cams NSR Stage 1 HRT hydraulic roller camshaft and lifter kit.
( 1 )
$1,839.95
COMP Cams Stage 2 LST Master camshaft packages for GM LS applications take the guesswork out of choosing the right valve train upgrade package for your specific engine and desired performance. The "Low Shock Technology" behind COMP Cams LST camshaft packages features lobe profiles designed to maximize horsepower, while improving stability at higher rpm. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. By Spintron and dyno testing these new profiles with many combinations of valve train components, COMP Cams engineers have created valve train packages that are perfectly matched for maximum horsepower and dependability in all popular LS applications with varying modifications. Stage 2 LST kits commonly add 90+ hp, depending on application. Stage 2 LST Master camshaft packages include: * COMP Cams LST camshaft * Lifters * Timing gear set or phaser limiter (depending on application) * Pushrods * Valve springs * Retainers * Valve locks * Spring seats * Valve seats
( 1 )
$1,784.95
On Sale
COMP Cams Thumpr NSR Ford Coyote 5.0 modular 4V camshafts present big power gains, along with the distinctive Thumpr idle lope—and you don't need to upgrade the valve springs. Ford 5.0L modular 4-valve V8 engines have become hugely popular, so how do you improve upon already great performance? With a camshaft from the COMP Cams family of Thumpr NSR camshafts! Choose the cam model (Thumpr or Mutha' Thumpr) designed for your vehicle and engine application. Features include: * Brings legendary Thumpr sound to the 5.0 Coyote * Optimized lobe profiles for increased airflow and exhaust efficiency * Big performance gains in mid- to upper-rpm range * Valve spring upgrade not required * One-piece billet steel construction * Compatible with N/A and supercharged applications
Not Yet Reviewed
$2,046.95
$1,637.56
—
$1,842.26
S&S Cycle Milwaukee 8 gear drive cam chest kits include everything necessary to convert to gear drive for improved cam timing accuracy and eliminate the stock cam chain tensioner. All parts in each kit are matched to ensure superior quality, fit, finish and performance. Each kit includes necessary gaskets, components, and hardware required for a complete installation. S&S gear drive kits are available for water-cooled and oil-cooled motorcycle models. Select the kit designed for your bike. Features of Milwaukee 8 gear drive cam chest kits: * Oil pump and cam plate are precision-machined from billet aluminum with a blue anodized finish * Passage plugs are removable for servicing * Independent scavenge sections for the flywheel cavity and cam chest * Debris screens in both scavenge pickups * Magnet in cam helps stop debris from entering oil pump * Increased oil flow capacity on both the feed and scavenge sides * Adjustable pressure relief valve is adjustable with the unit installed in the engine * S&S Quickee Pushrods with chrome or gloss black pushrod tubes * S&S premium tappets—hand assembled to exacting tolerances; reduced valve train noise from start up to shut down * Billet aluminum tappet cuffs have a hard-anodized black coating and are stronger than stock to eliminate distortion and improve tappet stability in high-lift situations * Outer drive gears included * 465 Torque cam kits are the ideal choice for Touring bike applications * 475 kits are bolt-in cams that can produce up to 100 horsepower * 540 kits are designed to add even more stump pulling torque to your big bore M8, for those that keep the revs below 6,000 rpm—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift * 550 kits are for use with large displacement engines—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift
Not Yet Reviewed
$1,599.95
—
$1,815.95
Upgrade your entire cam chest with S&S Cycle Milwaukee 8 chain drive cam chest kits! The parts in each kit are matched to ensure superior quality, fit, finish, and performance, and will include the necessary gaskets, components, and hardware required for a complete installation. S&S Cycle chain drive kits are available for water-cooled and oil-cooled motorcycle models. Select the kit designed to fit your bike. Features of Milwaukee 8 chain drive cam chest kits: * Oil pump and cam plate are precision-machined from billet aluminum with a blue anodized finish * Passage plugs are removable for servicing * Independent scavenge sections for the flywheel cavity and cam chest * Debris screens in both scavenge pickups * Magnet in cam helps stop debris from entering oil pump * Increased oil flow capacity on both the feed and scavenge sides * Adjustable pressure relief valve is adjustable with the unit installed in the engine * S&S Quickee pushrods with chrome or gloss black pushrod tubes * S&S premium tappets—hand assembled to exacting tolerances; reduced valve train noise from start up to shut down * Billet aluminum tappet cuffs have a hard-anodized black coating and are stronger than stock to eliminate distortion and improves tappet stability in high-lift situations * Precision machined billet aluminum cam chain tensioner * 465 Torque cam kits are the ideal choice for Touring bike applications * 475 kits are bolt-in cams that can produce up to 100 horsepower * 540 kits are designed to add even more stump pulling torque to your big bore M8, for those that keep the revs below 6,000 rpm—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift * 550 kits are for use with large displacement engines—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift
Not Yet Reviewed
$1,580.95
—
$1,621.95
On Sale
COMP Cams XFI NSR Ford 5.0 Modular 4V camshafts unlock a major power upgrade for the 2011+ Ford 5.0L engine. Specifically designed for Coyote V8 applications, these camshafts are counterbalanced and work with phaser limiters to produce optimum, safe power. By taking cutting-edge race technology and applying it to street applications, COMP Cams has engineered these phaser-friendly cams with an exclusive, integrated counterbalance design that ensures a smoother operating valvetrain. They are available for both naturally aspirated and supercharged engines, with three stages available in each series. All cams are "no springs required." Optimized race and street profiles give you power where you need it the most, whether that's maximized midrange power and torque or increased top-end horsepower. Drive with COMP Cams XFI NSR Ford 5.0 Modular 4V camshafts and drive with sophisticated power!
Not Yet Reviewed
$2,046.95
$1,842.26
On Sale
COMP Cams XFI VSR Ford 5.0 Modular 4V camshafts offer billet steel strength and performance for maximum power on your supercharged/turbocharged street/strip application. These XFI Series, valve spring required camshafts are specifically engineered and ready to unlock the potential power of your Ford Coyote 5.0L DOHC modular 4V engine. They are available in two stages of performance. Features: * Stage 1: Optimized with higher lift for specific spring kits, allowing more rpm and added exhaust for forced induction * Stage 2: Very close to a competitive NHRA Factory Shootout or race turbo grind, but mild enough for limited street use
Not Yet Reviewed
$2,046.95
$1,842.26
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
