Availability
Showing In Stock Items. Show All 26 Items.
For high load applications, King SM-Series rod bearings contain the strongest aluminum-based material offered by King. The alloy is strengthened by the addition of manganese and chromium. King SM-Series connecting rod bearings feature a traditional steel-backing, plus an aluminum bonding layer and the aluminum bearing alloy. These replacement sets are available for a variety of vehicle applications.
( 1 )
$20.50
—
$45.99
King SI-Series main bearings are recommended for OE applications. These replacement bearings are designed for aftermarket gasoline or diesel engine rebuilding—and performance engines with factory crankshafts. The bearings have an improved crankshaft finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series main bearings feature improved oil clearance to reduce wear and increase engine life, which in turn reduces operating noise, vibration, and excess oil flow. Order the bearing set designed for fitment on your make and model.
( 85 )
$20.99
—
$49.99
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 8 )
$44.99
—
$45.99
Summit Bucks
ACDelco GM Genuine Parts camshaft bearings are true OE parts installed during production of or validated by General Motors for GM applications. They're designed, engineered, and tested to rigorous standards to ensure the correct fit and function in your vehicle. These bearings are machined from steel-backed bronze alloy and are available in a variety of diameters. For a stress-free install and predictable performance, service your vehicle with direct-fit replacement parts from ACDelco.
( 2 )
$36.99
Built with enhanced tri-metal, King XP-Series main bearings have a layered copper lead construction, with a nickel plate barrier and lead/tin/copper Babbitt overlay over a steel backing--in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors: an amazing +/- .0001 in. The XP-Series main bearings are narrowed for large radii crankshafts and feature enlarged, chamfered oil holes with full, 3/4 in., or 1/2 in. grooving for improved oiling. They deliver consistent and reliable performance with a high-load capacity. These race-only Xtreme Performance (XP-Series) Tri-Lecular main bearings are proven track-tough to handle the ground-shaking power of your race engine. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 43 )
$40.99
—
$47.99
King Engine BB-Series cam bearings are recommended for OE rebuild applications. These cam bearings are babbitt on steel, and are precision machined and then micro-finished to offer long-lasting durability. Save yourself a costly rebuild with King Engine BB-Series cam bearings—stock replacements that been proven, time and time again, to get the job done.
( 14 )
$43.99
ACL direct replacement rod bearing sets are affordable, high-quality bearings expertly made from premium materials and engineered to match your exact requirements. They are offered in the Aluglide and Duraglide Series of bearings in numerous sizes, including standard, and covering a vast range of automotive gas engines, as well as diesel applications. Select the set desired for your build. ACL Aluglide bi-metal bearings are designed with a proprietary composition of aluminum, tin, and silicon combined with a steel backing to provide exceptional wear resistance, outstanding strength, and excellent load-carrying characteristics. ACL Duraglide bearings feature a tri-metal (copper/lead/alloy) design that provides a combination of high strength and the ability to withstand harsh/demanding operating conditions above casual driving, making them ideal for performance engines and rebuilds.
( 1 )
$31.99
Hot Rods plain bearing crankshaft bearings are single journal sets precision engineered to meet or exceed OEM standards. The bearings are offered in several sizes and are color coded for easy identification. They can be used with OEM and Hot Rods' crankshafts. Choose the proper size to service your off-road machine.
( 1 )
$27.50
—
$38.91
Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications. pMaxKote provides: * Superior seizure resistance * Superior cavitation resistance * Superior wear resistance * Superior protection against oil starvation
( 10 )
$40.99
—
$41.99
Maintain your wheel centers with wheel bearings offered by Pro-X. Between riding and bike washing, wheel bearings take serious use and abuse. Pro-X wheel bearings are made to exact OEM specifications, to ensure maximum quality and performance. The Pro-X wheel bearings are offered as single or as set, and are a perfect match for your wheels, just the way you want it!
Not Yet Reviewed
$21.99
—
$44.99
King CP-Series rod bearings are premium OEM replacement bearings designed from copper-lead on steel with a .001 in. copper-lead tin over-plate. These quality OEM rod bearings are temperature-resistant with a high-load capacity to provide dependable engine performance. From quick repairs to full engine rebuilds, you can count on King Engine Bearings.
( 3 )
$44.99
—
$48.99
ACL direct replacement main bearing sets include their Aluglide and Duraglide Series of bearings in numerous sizes, including standard, and covering a vast range of automotive gas engines, as well as diesel applications. ACL Aluglide bearings are designed with a proprietary composition of aluminum, tin, and silicon combined with a steel backing to provide exceptional wear resistance, outstanding strength, and excellent load-carrying characteristics. ACL Duraglide bearings feature a tri-metal (copper/lead/alloy) design that provides a combination of high strength and the ability to withstand harsh/demanding operating conditions above casual driving, making them ideal for performance engines and rebuilds. Affordable, high-quality engine bearings expertly made from premium materials and engineered to match your exact requirements, ACL main bearing sets. Select the set designed for your engine.
( 1 )
$22.99
Performance and reliability start with All Balls Racing. Their countershaft seal kits package a case hardened bushing and a replacement outer seal with any O-rings, snap rings, or lock washers required for your application. Whether your off-road ride has two wheels or four, All Balls Racing has a countershaft seal kit for you.
Not Yet Reviewed
$21.19
—
$29.17
King XPG-Series coated rod bearings feature a unique lug design that eliminates the conventional lug recess, so no oil escapes and full oil pressure is maintained. With enhanced tri-metal copper/lead construction and nickel barrier, plus SecureBond adhesion, King XPG-Series coated rod bearings have a 20 percent higher load capacity—and better resist surface fatigue. They also feature King's factory-applied pMaxKote nano-composite coating that takes protection to the next level without adding any additional thickness! These replacement sets are available in different sizes for a variety of applications. For superior engine components, choose King.
Not Yet Reviewed
$35.99
Hot Rods output shaft kits feature a unique combination of innovative engineering and quality manufacturing. They are a quick solution to repairing a leaking output shaft seal in one complete kit. These kits include Hot Rods output shaft seal, output shaft bushing, o-rings, and a sprocket nut washer where applicable. Ride hard and be safe with quality parts from Hot Rods.
Not Yet Reviewed
$23.71
—
$35.11
Hot Rods plain bearing connecting rod bearings are precision engineered to meet or exceed OEM standards. The bearings are offered in several sizes and are color coded for easy identification. Choose the proper size to service your off-road machine.
Not Yet Reviewed
$31.31
—
$45.09
Wiseco main bearings are manufactured and engineered to the highest quality standards. These bearings are case-hardened to provide maximum life and smooth operation at high rpm. Wiseco main bearings are an excellent choice for bottom-end performance.
Not Yet Reviewed
$26.99
—
$35.99
While changing the front sprocket on your off-road motorcycle, it's always recommended to inspect the countershaft oil seal that's right behind the sprocket. Positioned on the high loaded countershaft and always in contact with dirt and water, the oil seal can easily start leaking. Pro-X Racing has developed a wide range of countershaft seal kits—an easy and complete replacement, offering all the needed components. These upgrade kits also result in improved durability against the OEM parts. Order the seal kits designed for your application. Complete packages include: * Upgraded oil seal * Hardened steel bushing * O-rings, snap ring, or lock washer (where applicable)
Not Yet Reviewed
$21.99
These Wiseco crank pin bearings feature the latest caged needle roller bearing design for maximum durability. They are available for either the crank or rod end of the connecting rod. The bearings are manufactured from the highest quality hot rolled steel that's case-hardened to 58-62 RC to extend the life of the assembly. The Wiseco crank pin bearings' unique design provides the best possible performance and highest possible rpm.
Not Yet Reviewed
$26.99
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 69 )
$34.99
For high load and performance applications, King SM-Series main bearings are the strongest aluminum-based material offered by King. The alloy is strengthened by the addition of manganese and chromium. SM-Series crankshaft main bearings feature a traditional steel-backing, aluminum bonding layer, and the aluminum bearing alloy. They are available for a wide variety of vehicle and engine applications.
Not Yet Reviewed
$29.99
—
$49.99
King XPG-Series main bearings feature a unique lug design that eliminates the conventional lug recess, so no oil escapes and full oil pressure is maintained. In addition, narrowed bearing lengths help eliminate dangerous fillet ride on high-radius cranks. With enhanced tri-metal copper/lead construction and nickel barrier, plus SecureBond adhesion, King XPG-Series main bearings have a 20 percent higher load capacity and better resist surface fatigue. For superior engine components, choose King.
( 2 )
$44.99
Need crankshaft bearings? See the specialists at King. Their CA-Series main bearings are a bi-metal silicon aluminum material offering high fatigue strength and a superior temperature threshold. These direct replacements are available for a variety of vehicle and engine applications. When it comes to bearings, there is only one King Engine Bearings.
Not Yet Reviewed
$41.99
These All Balls Racing crankshaft bearing and seal kits contain right side and left side crankshaft bearings and seals, depending on your application. These crankshaft bearings feature Koyo and Nachi bearings (precision Japanese crank bearings). All Balls Racing crankshaft seals are designed with a carbon/fluorocarbon sealing lip to reduce "dry start" friction and crank pin wear. All Balls Racing crankshaft bearings and seal kits include all of the parts needed to do the job right!
( 1 )
$37.53
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
