2020 - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

Ford Performance Parts 5.0L Coyote Gen 4X Crate Engines

Ford Performance Parts 5.0L Coyote Gen 4X crate engines are modern 5.0L 32-valve DOHC V8s that utilize advanced features, such as direct and port fuel injection, twin independent variable camshaft timing (Ti-VCT), high-flow aluminum cylinder heads, and 12:1 compression to deliver 460 hp and 420 lb.-ft. of torque (with premium fuel). The all-aluminum cylinder block features plasma transferred arc spray-in liners, cross-bolted main bearing caps, and thick main bearing bulkheads for strength. Ford's Gen 4X 5.0L Coyote features a single 80mm throttle body for easier packaging in various applications. Features and specs: * Hypereutectic aluminum pistons * Sintered steel connecting rods as used on the Boss 302 Mustang * Forged steel crankshaft * Single 80mm "drive-by-wire" throttle body * 9.5 qt. steel oil pan * Composite lightweight intake manifold * Mustang GT 409 stainless steel exhaust manifold—right side only * Engine mount bosses and bellhousing mount pattern common to 5.0L modular engines * 10R80 flexplate included * Engine weight: 445 lbs. without front accessory drive components Note: Driver side exhaust flange utilizes 5.2L pattern

Not Yet Reviewed

$11,704.99

Ford Performance Parts 5.0L Coyote Power Module with 10-Speed Automatic Transmission Combo Kits

Ford Performance presents the next generation 5.0L power all-in-one complete powertrain kit! The crew at Ford Performance spec'd out these kits to simplify the swap of the newest, most innovative 5.0L Coyote engine into just about any Ford vehicle. The Coyote power module teams the Mustang GT 460 hp 5.0L Coyote V8 with a state-of-the-art 10-speed automatic transmission, along with all the electronics and hardware to finish the installation. The engine features advances like direct and port fuel injection, twin independent variable camshaft timing, along with a lightweight plasma transferred wire arc spray aluminum engine block. The Coyote power module simplifies both the shopping and build experience by kitting up the right parts that are matched to deliver potent performance with civilized drivability. The engine control pack is truly plug-and-play to simplify the conversion to a modern electronically fuel injected V8 high performance engine. Build the Coyote project of your dreams with high-quality aftermarket parts by Ford Performance!

Not Yet Reviewed

$19,555.99

Magnuson Radix TVS1900 Supercharger Kits

Down to the smallest part, the Magnuson line of TVS1900 bolt-on supercharger systems are engineered as a complete package. The supercharger, supercharger intake manifold, inlet, pulley, fuel injectors, fuel rails, front & rear fuel crossovers, and intercooler come pre-assembled to make installation simple and easy while the accessory box is organized into individual sub-assemblies to help ensure that you don't lose track of parts in the middle of your installation. All the hardware needed for a full and complete installation is also included so you won't be running to the local parts store in the middle of your installation. In addition, our full color, step-by-step installation manuals will walk you through the install process with exact attention to detail. Magnuson's TVS1900 superchargers utilize EATON's latest 6th Generation supercharger rotor technology found in such industry leading performance vehicles as the Corvette ZR-1, the Cadillac CTS-V, and the 2013 Mustang GT500. These Twin Vortices Series superchargers feature a pair of four-lobe, high-helix rotors with 160-degrees of overall twist that are housed in Magnuson's patented high-flow housing. This highly efficient package requires less power to drive, delivers cooler discharge temperatures, and is much quieter than many of its competitors. These superchargers are all manufactured in their TS16949 certified facility – the highest ISO OEM quality certification standard in the market.

3.4 out of 5 stars ( 5 )

$7,195.00

—

$7,595.00

Magnuson Magnum TVS2650 Supercharger Kits

Magnuson TVS2650 supercharger kits make power you can live with! Magnuson's powertrain integration technology offers you the ability to have big horsepower and drivability in the same supercharger. The TVS2650 system was developed to be a direct bolt on kit with minimal downtime, and straightforward installation. An enthusiast with basic tools can install the system in a weekend, or about a day for an experienced installer. The supercharger itself is maintenance free- pre-filled and sealed, nothing to check or top off for the lifetime of the engine. Magnuson only uses the highest quality components in their supercharger kits. Everything you need to supercharger your application is included, right down to detailed step-by-step installation instructions. Order yours today and unleash the power of a Magnuson Supercharger!

5.0 out of 5 stars ( 1 )

$7,995.00

—

$8,395.00

GearStar GM 4L80E Level 4 Transmissions

GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L80E Level 4 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 800 hp * Up to 700 lb.-ft. of torque * Stall: 2,800 to 3,400 * Custom-built, custom-stalled 10 in. billet racing lock-up converter * Master overhaul kit with Alto hardened steels * Raybestos Stage 1 frictions * TransGo reprogramming kit * Filter * Torrington bearing kit * Bushing kit * Thrust washer kit * Internal wiring harness * New manifold pressure switch * New EPC solenoid * New PWM solenoid * New input and output speed sensors * New 1-2 and 3-4 shift solenoids * Expanded capacity forward clutch drum * Extra-capacity 2nd gear clutch assembly * Expanded capacity 3rd clutch drum * Heat-treated input shaft * 300M main shaft * 300M forward clutch hub * Updated molded steel direct clutch piston * Updated reverse band * New low roller assembly * Wide kickdown band with new apply piston * Heavy-duty intermediate sprag * Updated boost valve * Updated TCC regulator valve * Blueprinted pump and valve body * Transmission mount * New OEM steel pan

1.0 out of 5 stars ( 1 )

$7,845.00

Roush 2018-21 5.0L Mustang Phase 2 Supercharger Kits

Roush 2018-21 5.0L Mustang Phase 2 supercharger kits delivers thrilling power, unparalleled performance, and versatility across both manual and automatic transmissions. They build on the enhanced performance of the Phase 1 supercharger system and boosts the stock 5.0L V8 Ford Mustang GT to an astounding 750 hp and 670 lb.-ft. of torque--a gain of 290 hp over the stock engine. The high-capacity, low-temperature radiator provides increased cooling capability and works with Eaton's TVS R2650 technology for greater power output. The larger LTR and upgraded calibration work in harmony to improve cooling and optimize performance, giving drivers extra laps at the track. Additional features: * Engineered for durability with large bearings and timing gears * Calibration optimized for 93 octane fuel, compatible with premium fuel * 3-year/36,000 mile limited Roush powertrain warranty included * Includes all necessary installation hardware

Not Yet Reviewed

$8,799.99

Edelbrock E-Force Jeep Wrangler Supercharger Kits

Now you can get more power for your Pentastar equipped JK! These all-new Edelbrock E-Force Jeep Wrangler supercharger kits are designed exclusively for the Pentastar 3.6L V6 engine. They'll increase torque for improved towing and off-road performance when you need it the most, while retaining great daily driving manners. The superchargers have been designed from the ground-up, and utilize the Eaton Gen VI 1320 TVS rotor assembly for maximum efficiency in a compact package. The manifold assembly also features a dual-pass intercooler for reduced air temperature. Edelbrock E-Force Jeep Wrangler Supercharger Kits have great looks, as well, black powdercoated with machined highlights for durability and a unique appearance to give your engine compartment a distinctive look. Here are a few more Edelbrock E-Force Jeep Wrangler supercharger kit features: * Exclusive design fits under the stock hood * Bolt-on installation * Self-contained oil system with 100,000 mile service interval (no drilling or plumbing required) * Electronic PCM programming module with application-specific tuning * Integrated bypass valve for minimal decrease in fuel economy

3.0 out of 5 stars ( 2 )

$6,772.95

—

$8,347.95

Magnuson Magnum TVS1320 Supercharger Kits

Magnuson TVS1320 supercharger kits make power you can live with! Magnuson's powertrain integration technology offers you the ability to have big horsepower and drivability in the same supercharger. These TVS1320 systems were developed to be direct bolt-on kits with minimal downtime, and straightforward installation. An enthusiast with basic tools can install the system in a weekend, or about a day for an experienced installer. The TVS1320 also looks and fits like OEM, almost like it belongs there. With no cutting or welding, it's also easily reverted to stock. The supercharger itself is maintenance free- pre-filled and sealed, nothing to check or top off for the lifetime of the engine. Magnuson only uses the highest quality components in their supercharger kits. Everything you need to supercharge your application is included, right down to detailed step-by-step installation instructions. Order yours today and unleash the power of a Magnuson Supercharger!

5.0 out of 5 stars ( 1 )

$7,495.00

Ford Performance Parts 5.0L Coyote Power Module with T-56 Manual Transmission Combo Kits

Ford Performance Parts has the complete solution for your drivetrain upgrade needs with the 5.0L Coyote manual power module and T-56 manual transmission combo kit, which includes: * Gen 4X 5.0L Coyote crate engine * Tremec 6-speed manual transmission * Complete engine controller and wiring harness (control pack) It's Next Generation 5.0L power all in one complete powertrain kit. The crew at Ford Performance have spec'd out a kit to simplify the swap of the newest, most innovative 5.0L Coyote engine into just about any Ford vehicle. The Coyote power module teams the Gen 4X 5.0L Coyote V8 with a state-of-the-art Tremec 6-speed transmission, plus all the electronics and hardware to finish the installation. The engine features direct and port fuel injection, twin independent variable camshaft timing, and a lightweight plasma transferred wire arc spray aluminum engine block. Coyote power modules simplify both the shopping and build experience by kitting up the right parts that are matched to deliver potent performance with civilized drivability. The engine control pack is truly plug-and-play and simplifies conversions to a modern electronically fuel injected V8 high performance engine. Details and/or specs: * Gen 4X 5.0L Coyote engine * 460 hp at 7,000 rpm * 420 lbs.-ft. torque at 4,600 rpm * 12.0:1 compression ratio * Aluminum block * Boss 302 alternator kit * Starter and starter index plate * Control pack PCM and installation kit is tunable for power upgrades * Runs on pump gas * Steel Quicktime bellhousing * Roller pilot bearing * Tremec 6-speed transmission 2.66 1st gear * Clutch fork / throw-out bearing * Clutch kit * Billet flywheel * Installation hardware * Note: Engine will be fitted with an automatic flexplate. Included is a billet flywheel, to be installed on engine before installation into vehicle.

Not Yet Reviewed

$19,700.99

Ford Performance Parts Megazilla Crate Engines

The Ford Performance Parts engine team has unleased the 7.3L Megazilla crate engine! The Megazilla features the Ford Performance 7.3L intake manifold, CNC-ported cylinder heads, forged pistons and connecting rods. The Megazilla crate engine cranks out 612 hp and 670 lbs.-ft. of torque in a streetable package running on premium pump gas. Megazilla crate engine features: * 7.3L displacement * 10.5:1 compression * (M-6049-SD73P/M-6050-SD73P) CNC-ported aluminum cylinder heads * (M-9424-73LP) low-profile intake manifold * (M-9926-M5292) 92mm throttle body * Mahle forged pistons * Callies H-beam forged connecting rods * (M-6303-SD73) production steel crankshaft * (M-6250-SD73A) hi-performance 7.3L camshaft w/ VCT delete * (M-6010-SD73) production cast iron block Peak power output (J607 standard): * 612 hp @ 5,580RPM * 670 lbs.-ft. of torque @ 3,920RPM * Over 500 lbs.-ft. of torque from 2,500 rpm to 6,000 rpm Assembly includes: * Coils/plug wires/spark plugs * Production oil pan * (M-6038-73) shipping/storage cradle * Production engine wiring harness Additional information: * Bellhousing bolt pattern same as the Ford 4.6/5.4 and Coyote 5.0L * For control packs, please refer to part number: M-6017-73M and M-6017-73A (sold separately) * Custom calibration required * For starter, please refer to part number: M-11000-SD73 (sold separately) * For FEAD, please refer to part number: M-8600-SD73 and M-8600-SD73AC (sold separately) This part is designed and intended for competition use only or off-highway use only. It should not be installed on a vehicle that is driven on public roads and highways. Installation of this part on a vehicle driven on public roads and highways is likely to violate U.S. and Canadian laws and regulations relating to motor vehicle emissions.

Not Yet Reviewed

$22,097.99

Chevrolet Performance L8P 6.6L 400 C.I.D Engine Assemblies

By combining the large-displacement and heavy-duty elements of the L8T 6.6L engine and a unique camshaft based off the Corvette Stingray's high-revving LT2 V-8, Chevrolet Performance engineers have created the all-new L8P 400 c.i.d. Performance crate engine. Rated at 523 hp and 543 lbs.-ft. of torque, it offers your project a unique and naturally aspirated combination of big-displacement torque and high-rpm horsepower. The L8T 6.6L foundation is the same high-strength, big-displacement engine found in the Silverado HD from 2020 to present day, featuring a forged steel crankshaft and high-strength components. Additional features such as oil-spray cooling for the pistons and a cast iron, long-skirt cylinder block with 6-bolt, cross-bolted main caps contribute to the engine's strength and durability. The new L8P builds on that with a unique, upgraded valvetrain featuring performance-oriented valves and springs, along with a unique camshaft that is based off the Corvette Stingray's LT2 engine. It has a non-active fuel management profile and more duration than the L8t's camshaft. It's the best of both engines: the largest displacement in the LT family and the power-building attributes of the Corvette camshaft. Put it to work in your project. Fast Facts: * Displacement: 400 cu. in. (6.6L) * Bore x Stroke: 4.06 in. x 3.86 in. * Crankshaft: Forged steel * Pistons: Hypereutectic aluminum * Compression ratio: 10.8:1 * Cylinder heads: Rectangular port D/I with 59.02cc chambers * Camshaft type: Billet steel hydraulic roller * Camshaft duration: 218 degree intake/231 degree exhaust at .050 in. * Fuel delivery: Direct injection with high-pressure pump * Horsepower: 523 at 5,800 rpm * Torque (lbs.-ft.): 543 at 4,800 rpm * Engine type: Gen V small block V-8 direct injection spark ignition * Block: Cast iron with 6-bolt no Dula main bearing caps * Connecting rods: Forged powder-metal * Valve lift (in.): 0.549 intake / 0.549 exhaust * Rocker arms: Investment cast roller trunnion * Rocker arm ratio: 1.8:1 * Intake manifold: Composite * Throttle body: 87mm diameter (single-bore) * Fuel delivery: High-pressure direct injection (2,175 psi / 150 bar) * Recommended fuel: Premium pump * Ignition system: Coil-on-plug * Maximum recommended RPM: 6,000 rpm * Reluctor wheel: 58X * Balanced: Internal * Note: Use with the new engine control kit, P/N 19435524, which includes a programmed controller, wire harness, pedal, oxygen sensors and mounts, MAD, fuel line pressure sensor and fuel pump power module. Flexplate P/N 12685003 must be purchased for these engines to be compatible with the 10-speed supermatic transmission. 10-speed supermatic transmission uses six bolts to attach the torque converter.

Not Yet Reviewed

$8,948.80

GearStar GM 4L80E Level 3 Transmissions

GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L80E Level 3 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 600 hp * Up to 600 lb.-ft. of torque * Stall: 2,600 to 3,600 * Custom-built 10 in. billet racing lock-up converter * Master overhaul kit with Alto hardened steels * Raybestos Stage 1 frictions * TransGo reprogramming kit * Filter * Torrington bearing kit * Bushing kit * Thrust washer kit * Internal wiring harness * New manifold pressure switch * New EPC solenoid * New PWM solenoid * New input and output speed sensors * New 1-2 and 3-4 shift solenoids * Expanded capacity forward clutch drum * Extra-capacity 2nd gear clutch assembly * Expanded capacity 3rd clutch drum * Heat-treated input and main shafts * Heat-treated forward steel clutch hub * Updated molded steel direct clutch piston * Updated reverse band * New low roller assembly * Wide kickdown band with new apply piston * Heavy-duty intermediate sprag * Updated boost valve * Updated TCC regulator valve * Blue printed pump and valve body * Transmission mount * New OEM steel pan

Not Yet Reviewed

$6,845.00

VEGE Remanufactured Long Block Crate Engines

VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.

3.74 out of 5 stars ( 76 )

$5,263.99

—

$5,791.99

Edelbrock E-Force TVS2650 Mustang Stage 2 Track System Supercharger Kits

Edelbrock E-Force TVS2650 Mustang Stage 2 track system supercharger kits will transform your late model muscle car into a force to be reckoned with! The kits utilize Eaton's TVS2650 supercharger rotors. The high twist, 4-lobe rotor design is 15 percent larger than the TVS2300 and features several improvements to maximize efficiency and performance at upper RPMs, including: * 170 degree twist (versus 160) * Better sealing with optimized "length to diameter" ratio * Increased durability with larger bearings and timing gears * Pressure relief ports in bearing plate for reduced input power Models are available for Coyote or stock cylinder head configuration; with or without damper these features: computer chip/programmer; damper; fuel pump; and belt tensioner. Order the kit with options preferred for your application.

Not Yet Reviewed

$11,759.95

—

$12,071.95

Edelbrock E-Force GM Truck and SUV Stage 1 Street Legal Supercharger Kits

Edelbrock E-Force GM truck and SUV Stage 1 Street Legal supercharger kits up the power in your late model GM truck or SUV. These GM Supercharger systems are specially designed for each application and will allow you to boost your towing performance to impressive levels. These systems feature long intake runners for maximum low end torque making them ideal for towing and off-road performance applications.

3.4 out of 5 stars ( 5 )

$8,576.95

—

$10,803.95

Edelbrock E-Force Camaro SS Stage 1 Street Legal Supercharger Kits

Edelbrock E-Force Camaro SS Stage 1 street legal supercharger kits transform your Camaro into a force to be reckoned with! The kits utilize Eaton's Gen VI TVS supercharger rotors, featuring a four lobe design with a full 160 deg. of twist for maximum flow, minimum temperature rise, quiet operation, and the reliability for which Eaton is known. The Edelbrock E-Force Camaro SS street legal supercharger kits are a complete system that maximizes efficiency and performance by minimizing air restriction into, and out of, the supercharger. The supercharger housing itself is integrated into the intake manifold for a seamless design with minimal components, eliminating the possibility of vacuum leaks between gasket surfaces. The system also utilizes a front drive, front inlet configuration giving it the shortest, least restrictive inlet path on the market. The upper plenum area is enclosed by a top cover that has been designed to provide an appealing and distinctive under-hood appearance. This configuration allows for a compact package that can fit under the stock hood and cowl of the Camaro, without sacrificing runner length, or intercooler area. Edelbrock E-Force Camaro SS street legal supercharger kits provide neck snapping performance that is safe to operate on a completely stock engine. The kits are 50-state emission legal, and come with a 3-year 36,000 mile warranty (restrictions apply) so that there are no worries when installing it on a brand new car. Claim the streets with the added influence of these E-Force supercharger kits from Edelbrock.

4.67 out of 5 stars ( 3 )

$9,321.95

Magnuson Magnum TVS2650R Supercharger Kits

Take your Z06 to the next level with Magnuson's TVS2650 Magnum Supercharger System! Built off of Magnuson's premium Magnum Performance Line, their Corvette Magnum System will give your engine an incredible 76 extra horsepower: 726 hp and 690 ft-lbs at the crank! The system has been designed to fit under the hood of a stock C7 Z06, all while featuring two massive charge air coolers for maximum cooling capability. At Magnuson, they only use the highest quality components in their supercharger kits. Everything you need to supercharge your Corvette is included, right down to detailed step-by-step installation instructions. Order yours today and unleash the power of a Magnum Supercharger on your Corvette!

5.0 out of 5 stars ( 1 )

$8,795.00

ProCharger P-1SC-1 High Output Supercharger Systems

ProCharger P-1SC-1 High Output supercharger kits are absolutely the most powerful and reliable supercharger systems offered for your vehicle. For street use or at the track, they'll deliver the largest increase in horsepower and torque available from any supercharger system. The extremely low-charge air temperatures provide much better engine longevity by protecting your motor from detonation. The supercharger kits are designed with a fundamental understanding of the physics behind supercharging and are engineered to the highest quality standards. By using CNC machining and nearly indestructible 7075 T-6 aircraft aluminum to produce the largest and strongest impellers in the industry, they're able to again improve both performance and reliability. The P-1SC-1 High Output kits are the only centrifugal superchargers to incorporate billet impellers in production models. Hundreds of models are available to ensure precise fitment on your vehicle. Select the ProCharger system and options tailored for your year/make/model.

Not Yet Reviewed

$7,799.00

—

$8,599.00

Edelbrock E-Force Colorado/Canyon Stage 1 Street Legal Supercharger Kits

Edelbrock E-Force Colorado/Canyon Stage 1 street-legal supercharger kits are exclusively tailored to boost the performance of your popular midsized truck. If you opted for the "best in class" horsepower of the V6, but wish you had more towing capability and torque, these kits allow you to have the best of both worlds with 340 hp and 303 ft.-lbs. of torque. Each of these E-Force superchargers increases the V6's engine power output by 24 percent and are designed to fit under your stock Colorado/Canyon hood--with no modifications. Special features of these Edelbrock E-Force Stage 1 supercharger kits: * Eaton R1740 rotor assembly with an integrated air-to-water intercooler core and front-mount heat exchanger for low inlet air temperature and increased power * Durable black powdercoat finish that blends nicely into the engine compartment * Integrated bypass valve for maximum fuel efficiency * True bolt-on installation with no modification to stock hood or body * Self-contained oiling system with a 100,000 mile service interval * 3-year/36,000 mile powertrain warranty coverage, when applicable * Full-color step-by-step instructions

4.2 out of 5 stars ( 5 )

$6,152.95

—

$6,939.95

Chevrolet Performance SuperMatic 6L80-E Transmissions

Chevrolet Performance developed the new SuperMatic 6L80-E 6-speed automatic transmissions with upgraded internal components, offering an exceptional torque rating of 650 lbs.-ft. That's a 45 percent increase over regular-production versions of this same transmission. A deep first gear enables strong launch performance, while the top gear supports balanced performance on the highway. They're for use with Chevrolet Performance LS and LSX crate engines in RWD applications. SuperMatic 6L80-E transmissions feature: * 3,000 to 3,400 stall converter * Electro/hydraulic controls with clutch-to-clutch shifting * Output torque rating of 650 lbs.-ft. * Gear ratios: 4.02 (1st), 2.36 (2nd), 1.53 (3rd), 1.15 (4th), 0.85 (5th), 0.67 (6th) * Lightweight diecast aluminum case contributes to dry weight of approximately 195 lbs. * Uses DEXRON VI premium fluid * Truck-style production oil pan * Production vent tube assembly * Approximately 23.5 in. long * Controller and harness, with calibrations for street and track * Harness also includes paddle-shift connection, transmission bulkhead connector that supports aftermarket gear indicator displays, electronically controlled shifters, and more * Chevrolet Performance-specific design includes provisions for an aftermarket transmission cooler, including -6 AN fittings

3.0 out of 5 stars ( 2 )

$6,148.77

Holley Off-Road 2019-2024 Ram 1500 Performance Packages

Holley Off-Road has been working hard to bring innovation and incredible products to your Ram 1500 platform. These Performance Packages by Holley are a comprehensive performance upgrade kit tailored for 2019-2024 Ram 1500 pickups. The suspension upgrades feature ADS Racing Shocks Mesa 2.5 Series shocks, which are larger than stock, providing increased fluid capacity to prevent shock fade and deliver exceptional off-road durability combined with commuter comfort. The kit also includes a Flowmaster Signature Series exhaust system, known for its hand-welded 304 stainless steel construction and balanced sound profile, offering an aggressive yet moderate tone. Additionally, each package is equipped with a tuner suited for each model year, including DiabloSport PredatorX, Intune 3, and DFM Module + Amp'd Throttle Boost Kit, all of which provide pre-loaded tunes and customization options for optimal performance. Finally, Big Claw Performance rotors are included, designed for improved braking performance and enhanced cooling to ensuring safety and reliability during high-performance driving. Gear up your 2019-24 Ram 1500 pickup for your next off-road adventure with one of these complete Performance Package upgrades from Holley Off-Road.

Not Yet Reviewed

$5,194.95

Currie Extreme 60 Crate Axles

Currie Extreme 60 high-pinion rear crate axles are the strongest 60 Series axles offered, designed for severe off-road use with up to 40 in. tires and V8 conversion horsepower. They're available in different gear ratios and center section locker types. Order the model recommended for your Jeep application. Extreme 60 features: * High-pinion design with ring gear load bolt * High-clearance radius bottom center section * Low-friction hardened steel skid plate * Desert racing-inspired full-floating hub assemblies * Full-floating 35-spline 4340 chromoly axles * Large 13.5 in. brake rotors

Not Yet Reviewed

$10,100.00

ProCharger P-1SC-1 Supercharger Kits

ProCharger P-1SC-1 supercharger kits are absolutely the most powerful and reliable supercharger systems offered for your vehicle. For street use or at the track, they'll deliver the largest increase in horsepower and torque available from any supercharger system. Their extremely low-charge air temperatures provide much better engine longevity by protecting your motor from detonation. These supercharger kits are designed with a fundamental understanding of the physics behind supercharging and are engineered to the highest quality standards. By using CNC machining and nearly indestructible 7075 T-6 aircraft aluminum to produce the largest and strongest impellers in the industry, they're able to again improve both performance and reliability. The P-1SC-1 kits are the only centrifugal superchargers to incorporate billet impellers in production models. Hundreds of models are available to ensure precise fitment on your vehicle. Select the ProCharger system and options tailored for your application.

4.78 out of 5 stars ( 9 )

$8,199.00

ProCharger P-1SC-1 Stage II Supercharger Systems

ProCharger P-1SC-1 Stage II supercharger systems deliver larger power gains, coolest charge air temperatures, and the greatest reliability. Thanks to many years of forced induction engineering and innovation, ProCharger technology offers extremely low charge air temperatures, that also provides much better engine longevity by protecting your motor from detonation. The P-1SC-1 Stage II supercharger systems are complete kits with their most-advanced, quiet, and self-lubricating superchargers, highly effective and larger air-to-air intercoolers, handheld programmer, and other components that create an attractive, OEM-quality installation. Cooler air makes more power, and ProCharger P-1SC-1 Stage II intercooled systems supply lots of it to increase horsepower and performance.

3.0 out of 5 stars ( 1 )

$8,299.00

—

$20,399.00

2020 Parts and Accessories