Availability
Showing In Stock Items. Show All 251 Items.
Summit Racing™ LS oil galley barbell plug kits give you a cool, affordable way to improve your LS engine's oiling system. They include the rear "barbell" or "dogbone" which has a smaller stem diameter than the factory plastic unit to improve flow to the filter, a solid plug to delete the filter bypass in the oil pan, and a step washer and bolt to support the unsupported side of the oil pump pickup tube retainer.
( 6 )
$24.99
When it's time to change the fuel lines on your vehicle, look to ACDelco for GM-recommended replacements—including fuel feed, vapor, and return hose assemblies. The lines are available in a wide range of sizes, materials, and configurations for fitment on countless vehicles from the 1990s and up. Order the model designed for your application.
( 8 )
$44.99
—
$73.99
BTR offers DOD delete plug kits that provide an easy way to get rid of pesky, failure prone DOD/AFM lifters in your LT powered pickup truck. These plug kits include the necessary components to delete the problematic DOD system on your Chevrolet GM Gen V+ L84/L87 engine to remove the 8-cylinder AFM/DOD solenoids during a delete. From F-body trucks to Corvette, Sierra to Silverado, G8 to GTO, Brian Tooley Racing has just the components you need for making power with your LS or Gen V ride! Note: These cylinder deactivation components will not work for the L83/L86 engines.
( 2 )
$40.00
—
$44.99
Summit Racing™ coolant crossover delete kits allow you to block off the rear coolant crossover or steam passages on your LS cylinder heads. The low-profile design gives extra clearance and does not require removal of the block-off when removing the cylinder head bolts. These delete kits include two billet aluminum plugs, O-rings, and bolts. Order the kit recommended for your year/make and engine application.
( 3 )
$20.99
Avoid a potential mishap from a leaking or a blown heater hose--make an upgrade to Continental OE Technology Series HY-T black heater hoses. The HY-Ts are perfect for applications where excellent resistance to antifreeze coolants and extreme underhood temperatures is required. The tube and cover are manufactured from EPDM (ethylene propylene diene monomer) rubber with superior resistance to heat, ozone, and chemical coolants. Each hose is then reinforced with 2-spiral synthetic for additional strength and durability. Continental OE Technology Series HY-T black heater hoses are constructed to meet specifications similar to SAE J20R3--so they can take the heat.
( 36 )
$35.99
—
$239.99
Summit Bucks
ACDelco automatic transmission cooler lines feature strong steel and flexible rubber construction. These quality reinforced hoses carry transmission fluid to and from the cooler, just like the originals. And also like the factory equipment, these genuine GM components offer the proper fit and performance. Hundreds of configurations are available; order the replacement lines recommended for your vehicle.
( 19 )
$128.99
ICT Billet heater core hoses are great for doing LS/LT engine swaps when retaining the heater core. The USA-made hoses are compatible with all OEM LS and LT water pump outlet hose sizes. The package includes 60 in. hoses in 5/8 in. and 3/4 in. inside diameters.
( 4 )
$65.99
Elevate your RAM's cooling system with Mishimoto 6.7L Cummins top heater hose upgrade. Specifically designed to replace the leak-prone heater hose quick-disconnect at the engine, these upgrades feature an O-ring-less, -10AN connection for improved reliability. With easy installation and a perfect fit, Mishimoto top heater hose fittings are must-haves for Cummins enthusiasts looking to enhance their cooling system's durability. You can say goodbye to coolant leaks and hello to seamless coolant flow, thanks to Mishimoto top heater hose upgrades. Includes: * Stainless steel AN adapter * -10AN push lock fitting * Worm gear clamp * Mishimoto Lifetime Warranty
( 1 )
$110.95
Earl's Performance clutch adapter fittings convert OEM master cylinders, clutch release bearings, and slave cylinders to accept a better replacement for your less-than-perfect OEM plastic hose. These quick-disconnect fittings work perfectly with Earl's Speed Flex hose (not included). They're made from 304 stainless steel or aluminum and include EPDM O-rings. The adapter fittings are offered in several early and late model vehicle styles, straight and 90 degree angle. Check your OEM hose for the proper fit.
( 29 )
$24.74
Eliminate the troublesome and leaky quick-connect heater core line on your truck with the latest OEM+ solution from Fleece Performance. Their heater core replacements hose and fitting kits are direct replacements for the problematic stock hose and quick-connect style fitting. The silicone hose and stainless steel fitting will provide a reliable solution to fix the leaks once and for all. Fleece kits include Permatex thread sealant and two new hose clamps.
Not Yet Reviewed
$69.99
Dayco standard heater hoses carry the heated coolant from the engine block to the heater core under the dashboard, and return it to the engine. They're made for general service on light trucks and passenger cars. The ultra-durable hoses are constructed using all EPDM compounds, with spiral reinforcement for high burst strength and heat resistance of -40 degrees F (-40 degrees C) to +257 degrees F (+125 degrees C). These black cover hoses are similar to the SAE 20R3, Class D-2, and are specifically designed to be compatible with all common coolants and coolant additives. However, they are not suitable for fuel or oil transfer. Dayco heater hoses are available in a variety of diameters and lengths.
( 43 )
$8.99
Keep the hot coolant circulating with molded heater hoses from Dayco. These hoses are constructed from synthetic EPDM for high-strength and resistance to oil, salt, mud, debris, coolants, and environmental elements. The inner base tube of Dayco molded heater hose is reinforced with knitted rayon for maximum strength and burst-resistance. They eliminate the need for multiple connections of hoses and clamps. Dayco hoses are specifically designed for your application to ensure proper fit and function.
( 107 )
$15.99
ICT Billet plug fittings are AN, NPT, and metric O-ring hex head, male nut, block-off cap fittings. Most are manufactured from black anodized aluminum, providing you with the same performance, durability, and service life you expect from ICT Billet.
( 4 )
$29.99
Continental molded radiator hoses are pre-shaped for specific applications and are constructed to original equipment manufacturers' specifications. They're molded to provide full flow-through tight bends, ease of application, and stress relief on radiator connections. Their tough Versigard rubber tube and cover resist heat, ozone, and chemical coolants—and their Tylanar-knit reinforcement provides burst limits exceeding SAE standards. These hoses meet or surpass SAE J20R4, D1 specifications. Hundreds of models are available for fitment on a wide range of vehicles. Order the length, diameter, and shape designed for your cooling system. When it's time for a replacement, make Continental your first choice for molded radiator hoses.
( 448 )
$7.99
—
$239.99
McLeod offers a variety of small parts, fittings, and connectors needed to finish your hydraulic conversion—including these clutch line clips. The quick-disconnect retaining clips are machined from steel and will provide a secure connection for your lines. They were original equipment on 2005-23 Ford Mustang 2.3L to 5.8L models.
( 4 )
$10.50
Fleece Performance offers fuel injector return line repair fittings for a variety of applications. For instance, the plastic factory injector return fitting on the 2011-and-up 6.7L Powerstroke engines is susceptible to breakage from heat, vibration, rough handling, and frequent disconnections for fuel filter maintenance. Upgrade this fitting and eliminate the risk of a broken fuel line with Fleece's heavy-duty billet aluminum injector return fitting. Featuring a dual O-ring internal design and serviceable barb fitting, these injector return fittings will ensure you're not left stranded with a broken, non-repairable fuel line. Additional details: * Heavy-duty, machined billet aluminum housing * Dual O-ring internal design for increased sealing * Serviceable billet aluminum barb fitting * Easy to install and remove * Sold individually or in a set of 5 * Application notes: Kits are designed to work with both OEM and aftermarket underhood fuel filter assemblies
( 2 )
$64.99
—
$324.95
McLeod hydraulic clutch lines are OE-style replacements for your stock lines. These hydraulic lines are available for many applications to suit your needs.
( 56 )
$69.50
Hayden Automotive offers a full line of accessories for your transmission coolers. These rubber transmission cooler hoses are available in a variety of sizes to suit your needs.
( 30 )
$7.99
—
$36.99
ACDelco GM Genuine Parts engine galley plugs are manufactured to be an exact replacement for your GM vehicle. GM original equipment parts give you peace of mind that the fit, form and function is of the highest standards. Order your OE replacement parts from the same source as General Motors--ACDelco.
Not Yet Reviewed
$4.99
—
$8.99
GM Genuine Parts engine oil drain plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These replacements are true OE parts installed during the production of or validated by General Motors for GM vehicles. They're designed, engineered, and tested to rigorous standards, and are backed by General Motors. Plugs are available for thousands of applications; order the style recommended for your vehicle.
( 3 )
$7.99
—
$10.99
Modify your factory master with RAM clutch adapter fittings. These fittings are available to fit your master to -3 AN male, -4 AN male, GM and Ford 2005 and later.
( 6 )
$20.00
Lisle fuel injector rail fuel line cap sets are used to block off the fuel rail during fuel pressure diagnostics in a variety of Cummins, Duramax, and Ford Powerstroke engines. They help in identification of faulty diesel fuel injectors and are used to diagnose engine knock sounds. Simply install the cap on the fuel rail in the place of the injection line; when the cylinder with the failed injector is capped, the rail pressure will rise and the vehicle will start. Each set comes with five different caps.
Not Yet Reviewed
$63.99
While the OEM coolant block-off plates use a gasket and can leak over time, PPE's billet block-off plates are thicker and use Viton® O-ring seals for maximum longevity. They are CNC-machined from billet aluminum with a leak-free design, and install using the OEM fasteners. Pacific Performance Engineering coolant block-off plates are available with a black or raw finish etched with the PPE logo. Select the one preferred for your diesel.
Not Yet Reviewed
$53.99
ACDelco GM Genuine Parts PCV valve hoses are a GM-recommended replacement component for you vehicle. These original equipment hoses will provide the same performance, durability, and service life you expect from General Motors. They are manufactured to OE specification for fit, form, and function so you can expect these hoses to fit the same as they did coming off of the assembly line.
( 15 )
$13.99
—
$36.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
