Availability
Showing In Stock Items. Show All 127 Items.
Ford Performance presents the next generation 5.0L power all-in-one complete powertrain kit! The crew at Ford Performance spec'd out these kits to simplify the swap of the newest, most innovative 5.0L Coyote engine into just about any Ford vehicle. The Coyote power module teams the Mustang GT 460 hp 5.0L Coyote V8 with a state-of-the-art 10-speed automatic transmission, along with all the electronics and hardware to finish the installation. The engine features advances like direct and port fuel injection, twin independent variable camshaft timing, along with a lightweight plasma transferred wire arc spray aluminum engine block. The Coyote power module simplifies both the shopping and build experience by kitting up the right parts that are matched to deliver potent performance with civilized drivability. The engine control pack is truly plug-and-play to simplify the conversion to a modern electronically fuel injected V8 high performance engine. Build the Coyote project of your dreams with high-quality aftermarket parts by Ford Performance!
Not Yet Reviewed
$19,555.99
Magnuson supercharger kits make power you can live with! Magnuson's powertrain integration technology offers you the ability to have big horsepower and drivability in the same supercharger. This technology recalibrates the engine and transmission control programs to work with the altered induction path and boost pressure of the supercharger. And that produces a seamless and consistent delivery of power over the entire rpm range--not just the high end! For you, that means Magnuson superchargers will boost your power output, and yet run like their factory installed units. Whether you're driving a Corvette or a Cadillac, a Silverado or a Hummer, or a Camaro or a Mustang, Magnuson supercharger kits deliver maximum performance!
( 12 )
$7,595.00
—
$8,395.00
Ford Performance Parts 5.0L Coyote Gen 4X crate engines are modern 5.0L 32-valve DOHC V8s that utilize advanced features, such as direct and port fuel injection, twin independent variable camshaft timing (Ti-VCT), high-flow aluminum cylinder heads, and 12:1 compression to deliver 460 hp and 420 lb.-ft. of torque (with premium fuel). The all-aluminum cylinder block features plasma transferred arc spray-in liners, cross-bolted main bearing caps, and thick main bearing bulkheads for strength. Ford's Gen 4X 5.0L Coyote features a single 80mm throttle body for easier packaging in various applications. Features and specs: * Hypereutectic aluminum pistons * Sintered steel connecting rods as used on the Boss 302 Mustang * Forged steel crankshaft * Single 80mm "drive-by-wire" throttle body * 9.5 qt. steel oil pan * Composite lightweight intake manifold * Mustang GT 409 stainless steel exhaust manifold—right side only * Engine mount bosses and bellhousing mount pattern common to 5.0L modular engines * 10R80 flexplate included * Engine weight: 445 lbs. without front accessory drive components Note: Driver side exhaust flange utilizes 5.2L pattern
Not Yet Reviewed
$11,704.99
BluePrint Engines Chevy LS 376 c.i.d. 530 hp EFI Retrofit dressed long blocks are for those wanting maximum horsepower and durability. Every BluePrint engine is dyno-tested for proven results and is backed by their exclusive 30-month/50,000-mile warranty. Specs and components for the Chevy LS 376 crate engines include: * New GM 6.2L block * Nodular iron rotating assembly * Forged connecting rods * Hypereutectic pistons * Aluminum cylinder heads -- 68cc chamber -- 2.165 in. intake/1.600 in. exhaust valves * Roller camshaft -- .612 intake/.585 exhaust lift -- 225 intake/238 exhaust duration at .050 -- 113 degree lobe separation * Compression ratio 10.7:1 * LS3 intake manifold * Fuel injection included * Coil packs * Oil pan * Valve covers * Timing cover * Water pump * Harmonic balancer * Spark plugs and wires
( 6 )
$11,149.00
Chevrolet Performance LT1 6.2L E-Rod long block crate engines have it all. They're architecturally similar to the LS family of small block engines, but with a unique block casting, cylinder head design, oiling system, and more. LT1 engines also combine advanced technologies—including direct-injection and continuously variable valve timing to support an advanced combustion system. Offered with a wet-sump or dry-sump oiling system, the Chevy E-Rod engine systems include the specially designed engine controller for retro-fit applications and harness needed to get the engine running. Engine specs and features: * Cast aluminum with 6-bolt nodular iron main bearing caps * Direct-injection, spark-ignition Gen-V small block V8 * Horsepower: 455 at 6,000 rpm * Torque: 465 lbs.-ft. at 4,600 rpm * Crankshaft: Forged steel * Connecting rods: Forged powdered metal * Pistons: Eutectic * Camshaft type: Billet steel roller * Valve lift (in.): .561 intake/.531 exhaust * Camshaft duration (at 0.050 in.): 200 degrees intake/212 degrees exhaust * Cylinder heads: Aluminum, rectangular port D/I * Valve size (in.): 2.13 intake/1.59 exhaust * Compression ratio: 11.5:1 * Rocker arms: Investment-cast, roller trunnion * Rocker arm ratio: 1.81:1 * Recommended fuel: Premium pump * Maximum recommended rpm: 6,600 * Reluctor wheel: 58x * Balanced: Internal * Engine control module * Exhaust manifolds * Catalytic converters * Mass airflow sensor and sensor boss * Oxygen sensors and sensor bosses * Air filter * Accelerator pedal * Evaporative emissions canister * Instruction manual
Not Yet Reviewed
$12,803.20
Manufacturer Rebate
GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L80E Level 3 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 600 hp * Up to 600 lb.-ft. of torque * Stall: 2,600 to 3,600 * Custom-built 10 in. billet racing lock-up converter * Master overhaul kit with Alto hardened steels * Raybestos Stage 1 frictions * TransGo reprogramming kit * Filter * Torrington bearing kit * Bushing kit * Thrust washer kit * Internal wiring harness * New manifold pressure switch * New EPC solenoid * New PWM solenoid * New input and output speed sensors * New 1-2 and 3-4 shift solenoids * Expanded capacity forward clutch drum * Extra-capacity 2nd gear clutch assembly * Expanded capacity 3rd clutch drum * Heat-treated input and main shafts * Heat-treated forward steel clutch hub * Updated molded steel direct clutch piston * Updated reverse band * New low roller assembly * Wide kickdown band with new apply piston * Heavy-duty intermediate sprag * Updated boost valve * Updated TCC regulator valve * Blue printed pump and valve body * Transmission mount * New OEM steel pan
Not Yet Reviewed
$6,845.00
ATK specializes in muscle. With the highest quality internal parts and dyno-proven combinations of every engine built, ATK is able to add the most bang for your buck and back it up with an industry leading warranty. This ATK High Performance GM LQ4 6.0L 535 hp base long block crate engine is fitted with LS3 heads. Engine specifications: * Horsepower: 535 * Torque: 485 * Block: OE LQ4/LQ9 6.0L iron * Bore/stroke: up to 4.030 in. x 3.622 in. * Displacement (cu.in): up to 371c.i.d. * Crankshaft: OE GM 24 tooth reluctor wheel * Rods: OE powder metal * Pistons: Hypereutectic 10.1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: Custom performance grind * Timing chain: OE single roller * Cylinder heads: -- ATK LS3 rectangular port aluminum -- 69cc/255cc -- 2.160 in. intake/1.600 in. exhaust * Rocker arms: OE 1.7 ratio with trunnion upgrade * Oil pump: Melling M295
Not Yet Reviewed
$5,199.99
Chevrolet Performance developed the new SuperMatic 6L80-E 6-speed automatic transmissions with upgraded internal components, offering an exceptional torque rating of 650 lbs.-ft. That's a 45 percent increase over regular-production versions of this same transmission. A deep first gear enables strong launch performance, while the top gear supports balanced performance on the highway. They're for use with Chevrolet Performance LS and LSX crate engines in 2WD applications. SuperMatic 6L80-E transmissions features include: * 2,400 to 2,800 stall converter * Electro/hydraulic controls with clutch-to-clutch shifting * Output torque rating of 650 lbs.-ft. * Gear ratios: 4.02 (1st), 2.36 (2nd), 1.53 (3rd), 1.15 (4th), 0.85 (5th), 0.67 (6th) * Lightweight diecast aluminum case contributes to dry weight of approximately 195 lbs. * Uses DEXRON VI premium fluid * Truck-style production oil pan * Production vent tube assembly * Approximately 23.5 in. long * Controller and harness, with calibrations for street and track * Harness also includes paddle-shift connection, transmission bulkhead connector that supports aftermarket gear indicator displays, electronically controlled shifters, and more * Chevrolet Performance-specific design includes provisions for an aftermarket transmission cooler, including -6 AN fittings
Not Yet Reviewed
$5,569.07
Chevrolet Performance LSX Bowtie engine blocks are designed for the advanced competition engine builder. They feature Siamese cylinder bores and a semi-finished deck height. The blocks can accept a maximum stroke of 4.250 in., a maximum bore of 4.250 in., and can support displacements of 454 cu. in. or more. LSX Bowties feature cast iron construction with an orange powdercoat finish. They accept all Gen III and IV LS-style cylinder heads, crankshafts, camshafts, and other components. Order the model with deck height and other options needed for your application. Additional features and specs include: * Front oil feed lines that can be plugged or restricted for mechanical flat tappet or mechanical lifter applications * Can be safely machined to 9.200 in. deck height * 1054 billet steel 6-bolt main bearing caps * 6-bolt cylinder head bolt pattern * Cam bores that can be machined to accept 60mm roller bearings * Can be machined for larger diameter lifters * External oil pump feed at the rear * Added 7th transmission bolt hole to work with early-style GM transmissions * Can accept a front motor plate for racing use * Threaded freeze plugs that can be used for external heaters or coolers * Windowed main bulkhead
( 1 )
$5,565.20
Manufacturer Rebate
GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L80E Level 4 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 800 hp * Up to 700 lb.-ft. of torque * Stall: 2,800 to 3,400 * Custom-built, custom-stalled 10 in. billet racing lock-up converter * Master overhaul kit with Alto hardened steels * Raybestos Stage 1 frictions * TransGo reprogramming kit * Filter * Torrington bearing kit * Bushing kit * Thrust washer kit * Internal wiring harness * New manifold pressure switch * New EPC solenoid * New PWM solenoid * New input and output speed sensors * New 1-2 and 3-4 shift solenoids * Expanded capacity forward clutch drum * Extra-capacity 2nd gear clutch assembly * Expanded capacity 3rd clutch drum * Heat-treated input shaft * 300M main shaft * 300M forward clutch hub * Updated molded steel direct clutch piston * Updated reverse band * New low roller assembly * Wide kickdown band with new apply piston * Heavy-duty intermediate sprag * Updated boost valve * Updated TCC regulator valve * Blueprinted pump and valve body * Transmission mount * New OEM steel pan
Not Yet Reviewed
$7,845.00
Manufacturer Rebate
GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L65E Level 4 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 650 hp * Up to 600 lb.-ft. of torque * Stall: 2,600 to 4,000 * Custom-built and custom-stalled 10 in. or 11 in. billet racing lock-up converter * Master overhaul kit with Alto hardened steels * Raybestos Gen II racing frictions * Filter * 29-element dual cage sprag * High-capacity upgraded pump assembly * New hardened pump rings * New 13-vane pump rotor * New vanes * New stator * .500 boost valve * Pressure regulator valve * Updated boost valve * TransGo reprogramming shift kit with Shift Command * Complete Torrington bearing kit * Bushing kit * Thrust washers * Heavy-duty hardened sun shell * Heavy-duty expanded capacity input drum with reinforcing sleeve * High-rev spring kit * 5-pinion heavy-duty front and rear planetary gear sets with sun gear * Hardened output shaft * Hardened reaction shaft and hub * Super hold 4th servo * Corvette servo * Wide carbon fiber wide 2-4 band * New internal wiring harness with new TCC solenoid * New shift solenoids * New EPC solenoid * New PWM solenoid * New 3/2 solenoid * New manifold pressure switch * New electronic speed sensor * New valve body spacer plate * New OE steel transmission pan * Transmission mount
( 2 )
$5,945.00
Edelbrock E-Force FR-S and BRZ Supercharger kits have finally arrived for your 2.0L equipped FR-S and BRZ. These kits are designed exclusively for the FA20/4U-GSE engine. The unique inverted design features long runners that allow for maximum flow at high rpm, while retaining great daily driving characteristics. The superchargers have been designed from the ground-up and utilize Eaton 1320 TVS rotor assemblies for maximum efficiency in a compact package. As with all Edelbrock E-Force superchargers, these systems feature an efficient high-flow inlet configuration that results in a shorter, less restrictive intake path for improved airflow and performance. A large dual pass air-to-water intercooler and heat exchanger cool the incoming air. All of these features help the E-Force supercharger to deliver dramatically improved performance—especially in the mid-range, where power dips have been eliminated for a smooth linear power curve. Lastly, each supercharger assembly is finished in a durable black powdercoat with red accents for a unique look that will let everyone know your car is E-Force powered! Kits are available with or without tuner. Order the model recommended for your vehicle. Additional product features: * High-flow intake box and filter that allows for twice the airflow * Compact design fits under the stock hood without modification * Supplied with preformed hoses for ease of installation * Bolt-on installation; everything fits right out of the box with no cutting or welding required * Features Eaton Gen VI 1320 TVS rotor assembly—the same high-quality rotors used by many OEM manufacturers * Self-contained oil system with 100,000 mile service interval (no drilling or plumbing required) * Includes an EcuTek ProECU Programming Kit with E-Force tune pre-installed * Integrated bypass valve for minimal decrease in fuel economy * 50-state emissions pending with Edelbrock tune * 3-year / 36,000 mile powertrain warranty
( 9 )
$6,187.95
—
$7,350.95
Edelbrock E-Force TVS2650 Mustang Stage 2 track system supercharger kits will transform your late model muscle car into a force to be reckoned with! The kits utilize Eaton's TVS2650 supercharger rotors. The high twist, 4-lobe rotor design is 15 percent larger than the TVS2300 and features several improvements to maximize efficiency and performance at upper RPMs, including: * 170 degree twist (versus 160) * Better sealing with optimized "length to diameter" ratio * Increased durability with larger bearings and timing gears * Pressure relief ports in bearing plate for reduced input power Models are available for Coyote or stock cylinder head configuration; with or without damper these features: computer chip/programmer; damper; fuel pump; and belt tensioner. Order the kit with options preferred for your application.
Not Yet Reviewed
$11,759.95
—
$12,305.95
TCI 6x 6-speed GM 4L80E automatic transmission packages are the first aftermarket 6-speed automatic transmissions capable of handling 850 hp. They give you six forward gears (2.97, 2.31, 1.57, 1.18, 1.00, and 0.75) for quicker acceleration and increased fuel economy at cruising speeds. The TCI 6x 6-speed GM 4L80E automatic transmission packages are versatile transmissions that fit Chevy small block, big block, and LS Series engines. They also feature a compact design, allowing them to work in a variety of vehicle applications, including pro touring, street, and race vehicles. The TCI 6x 6-speed GM 4L80E automatic transmission packages include a paddle shifter, wiring harness, dipstick, and transmission cooler. Choose the TCI transmission package that's recommended for your vehicle and engine application.
Not Yet Reviewed
$9,456.95
Edelbrock E-Force Mustang Stage 1 Street Legal supercharger kits transform your Mustang into a force to be reckoned with! The kits utilize Eaton's Gen VI TVS supercharger rotors, featuring a four lobe design with a full 160 degrees of twist for maximum flow, minimum temperature rise, quiet operation, and the reliability for which Eaton is known. These Mustang supercharger systems are exclusively designed to provide instant, reliable and safe horsepower for a stock Mustang with low boost for minimum stress on the engine. They feature minimum air restriction in and out of the supercharger, along with individual long intake runners for maximum low end torque for great off throttle performance. Claim the streets with the added influence of these E-Force supercharger kits from Edelbrock.
( 2 )
$8,713.95
—
$9,396.95
Now you can get more power for your Pentastar equipped JK! These all-new Edelbrock E-Force Jeep Wrangler supercharger kits are designed exclusively for the Pentastar 3.6L V6 engine. They'll increase torque for improved towing and off-road performance when you need it the most, while retaining great daily driving manners. The superchargers have been designed from the ground-up, and utilize the Eaton Gen VI 1320 TVS rotor assembly for maximum efficiency in a compact package. The manifold assembly also features a dual-pass intercooler for reduced air temperature. Edelbrock E-Force Jeep Wrangler Supercharger Kits have great looks, as well, black powdercoated with machined highlights for durability and a unique appearance to give your engine compartment a distinctive look. Here are a few more Edelbrock E-Force Jeep Wrangler supercharger kit features: * Exclusive design fits under the stock hood * Bolt-on installation * Self-contained oil system with 100,000 mile service interval (no drilling or plumbing required) * Electronic PCM programming module with application-specific tuning * Integrated bypass valve for minimal decrease in fuel economy
( 2 )
$6,772.95
—
$8,347.95
Summit Bucks
ProCharger P-1SC-1 High Output supercharger kits are absolutely the most powerful and reliable supercharger systems offered for your vehicle. For street use or at the track, they'll deliver the largest increase in horsepower and torque available from any supercharger system. The extremely low-charge air temperatures provide much better engine longevity by protecting your motor from detonation. The supercharger kits are designed with a fundamental understanding of the physics behind supercharging and are engineered to the highest quality standards. By using CNC machining and nearly indestructible 7075 T-6 aircraft aluminum to produce the largest and strongest impellers in the industry, they're able to again improve both performance and reliability. The P-1SC-1 High Output kits are the only centrifugal superchargers to incorporate billet impellers in production models. Hundreds of models are available to ensure precise fitment on your vehicle. Select the ProCharger system and options tailored for your year/make/model.
Not Yet Reviewed
$7,799.00
—
$8,599.00
Edelbrock E-Force Colorado/Canyon Stage 1 street-legal supercharger kits are exclusively tailored to boost the performance of your popular midsized truck. If you opted for the "best in class" horsepower of the V6, but wish you had more towing capability and torque, these kits allow you to have the best of both worlds with 340 hp and 303 ft.-lbs. of torque. Each of these E-Force superchargers increases the V6's engine power output by 24 percent and are designed to fit under your stock Colorado/Canyon hood--with no modifications. Special features of these Edelbrock E-Force Stage 1 supercharger kits: * Eaton R1740 rotor assembly with an integrated air-to-water intercooler core and front-mount heat exchanger for low inlet air temperature and increased power * Durable black powdercoat finish that blends nicely into the engine compartment * Integrated bypass valve for maximum fuel efficiency * True bolt-on installation with no modification to stock hood or body * Self-contained oiling system with a 100,000 mile service interval * 3-year/36,000 mile powertrain warranty coverage, when applicable * Full-color step-by-step instructions
( 4 )
$6,152.95
—
$6,939.95
Save time and money with a full All-Pro Off-Road APEX suspension lift kit. These combo kits feature King front coilover shocks (with external reservoir) and rear reservoir shocks are intended for those who want a complete race-proven suspension system. Front coilovers are adjustable for 0-3 in. of lift, and optional bump stops are available. Each kit also comes with a pair of All-Pro tubular chromoly upper control A-arms, a pair of All-Pro Standard or Expedition Leaf Pack, a pair of braided steel extended brakes lines, and a U-bolt flip kit with tapped plates for bump stop. Front and rear shocks are available in single adjustable or non-adjustable coilover options. Lift specs: 2.5 to 3 in. rear lift (standard springs) or 3 to 4 in. (Expedition springs). Order the kit and shock preferences designed to fit your application.
Not Yet Reviewed
$5,528.54
—
$6,782.11
Up the ante in your truck with the style and performance of BDS Suspension Fox 2.5 Elite coilover lift kits. Designed to improve stance, performance, and capability, kits include everything necessary to set your truck up right with clearance for big tires. Fox 2.5 Elite coilovers include a Dual Speed Compression (DSC) adjuster that allows easy high-speed and low-speed compression tuning for optimal performance in any terrain. Each kit will also include Fox performance rear shocks available in different options, heavy-duty control arms for increased suspension travel, and other matched components to take your truck to the next level. Select the kit designed for your truck.
Not Yet Reviewed
$5,655.60
—
$5,711.60
Designed from a clean slate approach, Dart now offers the Iron Eagle Mopar Gen III cast iron bare blocks that address the shortcomings of the Hemi Gen III platform, and are the ideal candidate for hot rodders, drag racers, circle track competitors, off-roaders, and high performance marine enthusiasts. By utilizing conventional style main caps with Gen III rotating assemblies and related components, Dart has addressed the windage and oil control problems, along with revising the cooling and oiling passages for improved flow. Non-VVT and VVT version offerings are available. Get everything you ever wanted out of your Gen III Hemi engine with the Iron Eagle Mopar Gen III cast iron bare blocks by Dart! Key features of Dart Iron Eagle Gen III Hemi cast iron engine blocks: * Manufactured from superior strength cast iron * Priority main oiling system with two lifter crossovers and restrictor provisions * Siamese cylinder bores with extra thick walls * Extra-thick decks ensure reliable head gasket seal * Blind head bolt holes available in 7/16 in. standard or 1/2 in. upgrade * Scalloped water jackets increase flow around cylinders for better cooling * Clearance for 4.050 in. stroke with steel rods * Billet steel 4-bolt main caps 1-5, center 3 main caps splayed * Main studs standard * Gen III Hemi style motor mounts * Provisions for OE stock roller lifters and cam * Uses stock timing covers * All OE bolt holes for starter, water pump, etc. * Block can be machined for VVT or non-VVT camshafts * Parts kit included (32000050 for non-VVT, or 32000051 for VVT); note parts kits do not include cam bearings
Not Yet Reviewed
$5,499.99
VEGE Remanufactured automatic transmissions enable you to get back on the road quickly—without breaking the bank! With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured automatic transmissions with a level of quality that equals that of new OEM products at extremely competitive prices. The parts are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Thousands of models are available, with aluminum case, torque converter included, and gear options from one through eight. Includes fluid. Get your vehicle shifting into gear with a reman auto-trans from VEGE.
( 7 )
$5,338.99
Currie crate axles deliver unrivaled strength, along with trail-tested, field-proven design. Their Currie 60 axles are complete pre-configured packages, for both front and rear applications, with direct bolt-in simplicity designed for severe off-road use, V8 horsepower, and up to 37 in. tall tires. They feature the Currie exclusive high pinion nodular iron radius bottom center section for improved obstacle slide over, heavy-duty 3 in. tubes, and the industry's strongest standard axle--full 35-spline inner/outer front and 40-spline semi-floating rear axles--making the Currie 60 axles the clear choice for serious off-road users. They increase axle width to 68.75 in. between wheel mounting surfaces for improved clearance with large tires. The front axle features 5 x 5 1/2 in. wheel lug pattern, while the rear is dual-drilled with both 5 x 5 in. (to match stock front axles) and 5 x 5 1/2 in. Upgrade strength, reliability, and functionality; replace your stock axles with Currie 60 crate axles.
Not Yet Reviewed
$7,250.00
—
$7,750.00
Currie Extreme 60 high-pinion rear crate axles are the strongest 60 Series axles offered, designed for severe off-road use with up to 40 in. tires and V8 conversion horsepower. They're available in different gear ratios and center section locker types. Order the model recommended for your Jeep application. Extreme 60 features: * High-pinion design with ring gear load bolt * High-clearance radius bottom center section * Low-friction hardened steel skid plate * Desert racing-inspired full-floating hub assemblies * Full-floating 35-spline 4340 chromoly axles * Large 13.5 in. brake rotors
Not Yet Reviewed
$9,500.00
—
$10,100.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
