2019 DODGE - Free Shipping on Orders Over $109 at Summit Racing

GearStar GM 4L65E Level 3 Transmissions

GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L65E Level 3 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 500 hp * Up to 500 lb.-ft. of torque * Stall: 2,600 to 3,200 * High performance 12 in. furnace-brazed converter -- Flanged hub and carbon fiber clutch * Master overhaul kit with Alto hardened steels * Raybestos Stage 1 frictions * Filter * 29-element dual cage sprag * High-capacity upgraded pump assembly * New hardened pump rings * New 13-vane pump rotor * New vanes * New stator * .500 boost valve * Pressure regulator valve * Updated boost valve * TransGo reprogramming shift kit with Shift Command * Bushing kit * New thrust washers * Complete Torrington bearing kit * Heavy-duty hardened sun shell * Heavy-duty expanded capacity input drum with reinforcing sleeve * High-rev spring kit * Corvette servo * Carbon fiber wide 2-4 band * New valve body spacer plate * Fill tube and stick * New shift solenoids * New EPC solenoid * New PWM solenoid * New 3/2 solenoid * New manifold pressure switch * New internal wiring harness with new TCC solenoid * New electronic speed sensor * Transmission mount * New OE steel transmission pan

Not Yet Reviewed

$5,945.00

VEGE Remanufactured Long Block Crate Engines

VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.

3.74 out of 5 stars ( 76 )

$5,263.99

Magnuson Magnum TVS2650 Supercharger Kits

Magnuson TVS2650 supercharger kits make power you can live with! Magnuson's powertrain integration technology offers you the ability to have big horsepower and drivability in the same supercharger. The TVS2650 system was developed to be a direct bolt on kit with minimal downtime, and straightforward installation. An enthusiast with basic tools can install the system in a weekend, or about a day for an experienced installer. The supercharger itself is maintenance free- pre-filled and sealed, nothing to check or top off for the lifetime of the engine. Magnuson only uses the highest quality components in their supercharger kits. Everything you need to supercharger your application is included, right down to detailed step-by-step installation instructions. Order yours today and unleash the power of a Magnuson Supercharger!

5.0 out of 5 stars ( 1 )

$7,995.00

—

$8,995.00

ProCharger P-1SC-1 High Output Supercharger Systems

ProCharger P-1SC-1 High Output supercharger kits are absolutely the most powerful and reliable supercharger systems offered for your vehicle. For street use or at the track, they'll deliver the largest increase in horsepower and torque available from any supercharger system. The extremely low-charge air temperatures provide much better engine longevity by protecting your motor from detonation. The supercharger kits are designed with a fundamental understanding of the physics behind supercharging and are engineered to the highest quality standards. By using CNC machining and nearly indestructible 7075 T-6 aircraft aluminum to produce the largest and strongest impellers in the industry, they're able to again improve both performance and reliability. The P-1SC-1 High Output kits are the only centrifugal superchargers to incorporate billet impellers in production models. Hundreds of models are available to ensure precise fitment on your vehicle. Select the ProCharger system and options tailored for your year/make/model.

Not Yet Reviewed

$8,399.00

—

$8,509.00

Summit Bucks

Vortech Centrifugal Supercharger Kits

Whether you have a mundane daily driver or a high-horsepower racer, Vortech has a supercharger kit for you. Their centrifugal supercharger kits feature lightweight aluminum impellers that are heat-treated and high-speed balanced to ensure smooth operation. An O-ring compressor housing seal and an innovative impeller seal improve sealing and reduce friction. Vortech has taken away the headaches of building a custom kit by engineering these kits to have a true OEM-quality fit and finish. Each kit is 100 percent complete, right down to the wire ties. Most kits include a matched compressor supercharger unit with SQ technology for "Super Quiet" operation. A high-flow air intake system with a reusable air filter, heat-resistant silicone hose couplings, and premium-grade flex hose is included as well. Additional features: * Flow-tested cast aluminum and/or urethane air discharge tubing * OEM-style, heat-treated cast 356 aluminum mounting brackets * Supercharger drive pulley * Integrated belt tensioner * Premium drive belt * Stainless steel clamps * Heavy-duty mounting hardware * Choice of satin or polished finish * Step-by-step, fully illustrated installation manual

4.22 out of 5 stars ( 9 )

$10,372.99

—

$10,702.99

Nitrous Express Hellcat Billet Supercharger Lid Nitrous and Water/Methanol Systems

Nitrous Express has the upgrade your Hellcat wants! Their Billet Supercharger Lid for Hellcat/Demon applications replaces the factory supercharger lid for a quick and clean install. The improved airflow design of this new lid ensures maximum flow—and the placement of nitrous and water/methanol passages provides huge increases in horsepower and torque. The system does not have a spraybar, so nitrous and fuel are injected inline with the supercharger air discharge. This means the fuel/nitrous mixture is swept evenly to each runner. Nitrous/fuel passages are CNC-machined into the lid itself, so the spray pattern is in the perfect location every time. Injecting nitrous into this pre-intercooled hot air discharge super-cools the air charge, resulting in increased flow across the factory intercoolers for maximum power gains. Water/Methanol features: The Stage 2.5 uses the progressive VC-50 controller that proportionally injects more or less water/methanol, according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water/methanol—and allows cooling and performance improvements over a wide range for improved drivability. The Stage 2.5 Boost Cooler will make the induction charge colder, denser, and increase 91 octane fuel to 116 octane race gas levels, allowing full power all the time! The Water/Methanol system details: * VC-50 adjustable progressive water methanol controller * Digital boost reading (1-50 psi) * 100 percent methanol-resistant (stainless steel, nickel plating, hard anodizing, EPDM) * Snow Performance Hyper-Sonic water methanol nozzles (eight #2 nozzles) * Snow Performance ACU-SEAL water methanol compression fittings * Snow Performance OEM-approved Extreme Environment 300 psi UHO water methanol pump * Snow Performance Running "S" engraved low-profile nozzle holder * Snow Performance Running "S" engraved low-profile high-flow check valve The nitrous system includes: * Ready to bolt-on billet supercharger lid * Billet fuel line adapter * Lightning Series billet aluminum and carbon fiber nitrous and fuel solenoids * Stainless steel braided lines * All wiring, switches and mounting hardware * Jetting for 100, 150, 200, 250, and 300 hp * Systems with a bottle include stainless steel bottle brackets and industry exclusive Lightning 500 bottle valve

Not Yet Reviewed

$5,153.18

—

$5,976.79

Clinched Widebody Kits

Clinched Widebody kits take your exterior to new, head-turning heights. You can improve upon your already sporty ride via a wider, meaner stance that in some cases will also enable you to run a much more aggressive wheel and tire combo. Clinched Widebody kits deliver unique styling and exclusive add-on components that will separate your car from the pack, in both looks and performance. Features include: * High-quality, precision-made ABS plastic construction—same material used for OE bumpers * Extremely durable qualities, ABS plastic is far superior to commonly used fiberglass * All parts come in unpainted black ABS plastic. You can paint or wrap the kit. In either case, you'll need to primer the parts first prior to installation * Finished product doesn't increase weight of vehicle * Factory production fit, based on 3D scanning/files and CNC technology Your kit may include these options (depending on application): * Front fender flares * Rear fender flares * Side skirts * Front bumper add-on elements * Rear bumper add-on elements * Ducktail trunk spoiler * Front bumper lip * Quarter panel flares * Rubber gasket * Installation hardware (Type 3) * Some kits are supplied and mounted with 3M automotive-grade double-sided tape

Not Yet Reviewed

$5,770.00

—

$6,000.00

Summit Bucks

Vortech Complete Supercharger Kits

Vortech has a wide variety of supercharger kits available for many electronic fuel injected cars, trucks, and SUVs. Vortech kits come complete with everything that you need to install some serious horsepower. All systems come with the required fuel management components and a fuel pump, depending on the application. Also, all required hardware comes with the kits, including hoses, OEM connectors, ducts, fasteners, and tie wraps. Of course, the kits include complete instructions with plenty of diagrams, graphics, and photos to make your installation easy.

Not Yet Reviewed

$10,372.99

—

$10,702.99

BluePrint Builder Series 426/610HP Standard Edition EFI Crate Engine and TKX Transmission Combos

BluePrint's Standard Edition Builder Series combos pair engine and transmission, eliminating guesswork and making it easier to gain the performance you desire. These combos match a fuel injected Chrysler Hemi-compatible 426 c.i.d. engine with a TKX manual transmission enabling the production of 610 hp and 525 lb.-ft. of torque with a compression ratio of 10.48:1. They are available with a polished or black pulley kit. Select the one you like best. BGE Hellcat engine block: * 4.090 in. bore * 4-bolt main * One-piece rear main seal Rotating assembly: * Forged steel crankshaft * Stroke: 4.050 in. * 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Gen III Hemi Apache aluminum cylinder heads: * 73cc chamber * 2.140 in. intake/1.65 in. exhaust valves Hydraulic roller camshaft: * .614 in. intake/.614 in. exhaust valve lift * 231 intake/255 exhaust duration at .050 in. of lift * 115.5 degrees lobe separation angle (LSA) Ignition timing: * Controlled by ECU TKX transmission package: * Mcleod Super Street Pro twin disc clutch * Hydraulic throwout bearing * Bellhousing * Billet flywheel * Starter -- First gear ratio: 2.87:1 -- Second gear ratio: 1.89:1 -- Third gear ratio: 1.28:1 -- Fourth gear ratio: 1.00:1 -- Fifth gear ratio: 0.81:1 Also included: * Fuel injection * Throttle body * Harmonic balancer * Fabricated intake manifold * Muscle car-style mid-sump swap oil pan * Spark plugs * Coil * Timing cover * Valve covers * Holley Terminator ECU controller kit and wiring harness * Polished or black front accessory drive: -- Water pump -- Type II power steering pump -- Remote power steering pump reservoir -- 140-amp one-wire alternator -- 7B10 peanut-style air conditioning compressor Notes: * Features 2013+ 58X reluctor wheel * VVT locked out * MDS eliminated

Not Yet Reviewed

$27,499.00

—

$27,699.00

BluePrint Builder Series 426/872HP Supercharged Crate Engine/T56 Transmission Combos

BluePrint's Standard Edition Builder Series combos pair engine and transmission, eliminating guesswork and making it easier to gain the performance you desire. These combos match a supercharged Chrysler Hemi-compatible 426 c.i.d. engine with a T-56 manual transmission enabling the production of an impressive 872 hp and 764 lb.-ft. of torque with a compression ratio of 10.48:1. They are available with a polished or black pulley kit. Select the one you like best. BGE Hellcat engine block: * 4.090 in. bore * 4-bolt main * One-piece rear main seal Rotating assembly: * Forged steel crankshaft * Stroke: 4.050 in. * 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Gen III Hemi Apache aluminum cylinder heads: * 73cc chamber * 2.140 in. intake/1.65 in. exhaust valves Hydraulic roller camshaft: * .614 in. intake/.614 in. exhaust valve lift * 231 intake/255 exhaust duration at .050 in. of lift * 115.5 degrees lobe separation angle (LSA) Ignition timing: * Controlled by ECU T56 6-speed transmission package: * Mcleod Super Steel Pro dual disc clutch * Bittel flywheel * Steel bellhousing * Engine guard * Starter -- First gear ratio: 2.66:1 -- Second gear ratio: 1.78:1 -- Third gear ratio: 1.30:1 -- Fourth gear ratio: 1.00:1 -- Fifth gear ratio: 0.80:1 -- Sixth gear ratio: 0.63:1 Also included: * Whipple 3.0L supercharger * Supercharger coolant reservoir * Hellcat throttle body * Harmonic balancer * Muscle car-style mid-sump swap oil pan * Spark plugs * Coil * Timing cover * Valve covers * Holley Terminator ECU controller kit and wiring harness * Polished or black front accessory drive: -- Water pump -- Type II power steering pump -- Remote power steering pump reservoir -- 140-amp one-wire alternator -- 7B10 peanut-style air conditioning compressor Notes: * Features 2013+ 58X reluctor wheel * VVT locked out * MDS eliminated

Not Yet Reviewed

$35,899.00

—

$35,999.00

ProCharger P-1SC-1 Supercharger Kits

ProCharger P-1SC-1 supercharger kits are absolutely the most powerful and reliable supercharger systems offered for your vehicle. For street use or at the track, they'll deliver the largest increase in horsepower and torque available from any supercharger system. Their extremely low-charge air temperatures provide much better engine longevity by protecting your motor from detonation. These supercharger kits are designed with a fundamental understanding of the physics behind supercharging and are engineered to the highest quality standards. By using CNC machining and nearly indestructible 7075 T-6 aircraft aluminum to produce the largest and strongest impellers in the industry, they're able to again improve both performance and reliability. The P-1SC-1 kits are the only centrifugal superchargers to incorporate billet impellers in production models. Hundreds of models are available to ensure precise fitment on your vehicle. Select the ProCharger system and options tailored for your application.

4.78 out of 5 stars ( 9 )

$8,509.00

—

$8,834.00

TCI 6x 6-Speed GM 4L80E Automatic Transmission Packages

TCI 6x 6-speed GM 4L80E automatic transmission packages are the first aftermarket 6-speed automatic transmissions capable of handling 850 hp. They give you six forward gears (2.97, 2.31, 1.57, 1.18, 1.00, and 0.75) for quicker acceleration and increased fuel economy at cruising speeds. The TCI 6x 6-speed GM 4L80E automatic transmission packages are versatile transmissions that fit Chevy small block, big block, and LS Series engines. They also feature a compact design, allowing them to work in a variety of vehicle applications, including pro touring, street, and race vehicles. The TCI 6x 6-speed GM 4L80E automatic transmission packages include a paddle shifter, wiring harness, dipstick, and transmission cooler. Choose the TCI transmission package that's recommended for your vehicle and engine application.

Not Yet Reviewed

$8,603.95

—

$9,793.95

Magnuson Magnum TVS2300 Supercharger Kits

Magnuson Magnum TVS2300 supercharger is designed to deliver maximum performance while retaining factory-like drivability and reliability. Generating 6 psi of boost, the Magnuson TVS2300 Hybrid Roots Style Supercharger delivers power gains of approximately 120 horsepower and 120 foot-pounds of torque at the rear wheels! But peak horsepower and torque numbers don't tell the whole story. "Under the curve" power is significantly enhanced delivering near instantaneous boost and torque upon demand that really pins you back in your seat. Inside of the supercharger manifold, a large liquid-to-air intercooler keeps your Intake Air Temperatures in check and provides consistent and repeatable performance. Combine that with the front-mounted heat exchanger, electric water pump, and intercooler coolant reservoir and you have a supercharger system with IATs that are typically only 20-40 degrees Fahrenheit over the ambient temperature. Maximizing your efficiency during cruising is the job of the supercharger's integrated bypass valve. This vacuum operated system allows air to bypass the supercharger and the rotors to "free spin" under light engine loads. During this situation the parasitic loss of the supercharger system is essentially negated, taking less than one-third of a horsepower to turn the rotors. This bypass valve also allows your supercharged vehicle to maintain stock-like derivability and fuel economy - giving you a package that delivers power without compromise.

4.75 out of 5 stars ( 4 )

$7,295.00

—

$7,595.00

BluePrint Builder Series 426/610HP Standard Edition EFI Crate Engine and T56 Transmission Combos

BluePrint's Standard Edition Builder Series combos pair engine and transmission, eliminating guesswork and making it easier to gain the performance you desire. These combos match a fuel injected Chrysler Hemi-compatible 426 c.i.d. engine with a T56 manual transmission enabling the production of 610 hp and 525 lb.-ft. of torque with a compression ratio of 10.48:1. They are available with a polished or black pulley kit. Select the one you like best. BGE Hellcat engine block: * 4.090 in. bore * 4-bolt main * One-piece rear main seal Rotating assembly: * Forged steel crankshaft * Stroke: 4.050 in. * 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Gen III Hemi Apache aluminum cylinder heads: * 73cc chamber * 2.140 in. intake/1.65 in. exhaust valves Hydraulic roller camshaft: * .610 in. intake/.611 in. exhaust valve lift * 231 intake/255 exhaust duration at .050 in. of lift * 113 degrees lobe separation angle (LSA) Ignition timing: * Controlled by ECU T56 6-speed transmission package: * Mcleod Super Steel Pro dual disc clutch * Bittel flywheel * Steel bellhousing * Engine guard * Starter -- First gear ratio: 2.66:1 -- Second gear ratio: 1.78:1 -- Third gear ratio: 1.30:1 -- Fourth gear ratio: 1.00:1 -- Fifth gear ratio: 0.80:1 -- Sixth gear ratio: 0.63:1 Also included: * Fuel injection * Throttle body * Harmonic balancer * Fabricated intake manifold * Muscle car-style mid-sump swap oil pan * Spark plugs * Coil * Timing cover * Valve covers * Holley Terminator ECU controller kit and wiring harness * Polished or black front accessory drive: -- Water pump -- Type II power steering pump -- Remote power steering pump reservoir -- 140-amp one-wire alternator -- 7B10 peanut-style air conditioning compressor Notes: * Features 2013+ 58X reluctor wheel * VVT locked out * MDS eliminated

Not Yet Reviewed

$28,299.00

—

$28,399.00

BluePrint Builder Series 426/872HP Supercharged Crate Engine and 4L80E Trans Combos

BluePrint's Standard Edition Builder Series combos pair engine and transmission, eliminating guesswork and making it easier to gain the performance you desire. These combos match a supercharged Chrysler Hemi-compatible 426 c.i.d. engine with a 4L80E automatic transmission enabling the production of an impressive 872 hp and 764 lb.-ft. of torque with a compression ratio of 10.48:1. They are available with a polished or black pulley kit. Select the one you like best. BGE Hellcat engine block: * 4.090 in. bore * 4-bolt main * One-piece rear main seal Rotating assembly: * Forged steel crankshaft * Stroke: 4.050 in. * 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Gen III Hemi Apache aluminum cylinder heads: * 73cc chamber * 2.140 in. intake/1.65 in. exhaust valves Hydraulic roller camshaft: * .614 in. intake/.614 in. exhaust valve lift * 231 intake/255 exhaust duration at .050 in. of lift * 115.5 degrees lobe separation angle (LSA) Ignition timing: * Controlled by ECU 4L80E 4-speed automatic transmission package: * Electronic transmission controller * 3000+ stall torque converter * Flexplate * Starter Also included: * Whipple 3.0L supercharger * Supercharger coolant reservoir * Hellcat throttle body * Harmonic balancer * Muscle car-style mid-sump swap oil pan * Spark plugs * Coil * Timing cover * Valve covers * Holley Terminator ECU controller kit and wiring harness * Polished or black front accessory drive: -- Water pump -- Type II power steering pump -- Remote power steering pump reservoir -- 140-amp one-wire alternator -- 7B10 peanut-style air conditioning compressor Notes: * Features 2013+ 58X reluctor wheel * VVT locked out * MDS eliminated

Not Yet Reviewed

$39,499.00

—

$39,599.00

KW Variant 4 Coilover Kits

KW Variant 4 coilover kits are developed exclusively for supercars, sports cars, and performance oriented sedans. With coilover struts made from stainless steel or aluminum, depending on the vehicle design, you give your super-sports car the necessary equipment to further increase the driving dynamics in everyday life. The triple-adjustable high performance dampers combine leading race technology to allow the independent adjustment of the rebound and the low-speed and high-speed compression damping. Select the coilover kit designed for your vehicle.

5.0 out of 5 stars ( 1 )

$7,494.00

BluePrint Builder Series 426/610HP Standard Edition EFI Crate Engine and 4L65/70E Trans Combos

BluePrint's Standard Edition Builder Series combos pair engine and transmission, eliminating guesswork and making it easier to gain the performance you desire. These combos match a fuel injected Chrysler Hemi-compatible 426 c.i.d. engine with a 4L65/70E automatic transmission enabling the production of 610 hp and 525 lb.-ft. of torque with a compression ratio of 10.48:1. They are available with a polished or black pulley kit. Select the one you like best. Block: * BGE Hellcat * 4.090 in. bore * 4-bolt main * One-piece rear main seal Rotating assembly: * Forged steel crankshaft * Stroke: 4.050 in. * 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder heads: * Gen III Hemi Apache aluminum * 73cc chamber * 2.140 in. intake/1.65 in. exhaust valves Camshaft: * Hydraulic roller * .610 in. intake/.611 in. exhaust valve lift * 231 intake/255 exhaust duration at .050 in. of lift * 113 degrees lobe separation angle (LSA) Ignition timing: * Controlled by ECU 4L60/70E 4-speed automatic transmission: * 2,200 to 2,400 stall torque converter * Flexplate * Starter * Electronic transmission controller Also included: * Fuel injection * Throttle body * Harmonic balancer * Fabricated intake manifold * Muscle car-style mid-sump swap oil pan * Spark plugs * Coil * Timing cover * Valve covers * Holley Terminator ECU controller kit and wiring harness * Polished or black front accessory drive: -- Water pump -- Type II power steering pump -- Remote power steering pump reservoir -- 140-amp one-wire alternator -- 7B10 peanut-style air conditioning compressor

Not Yet Reviewed

$28,199.00

—

$28,299.00

GearStar GM 4L65E Level 4 Transmissions

GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L65E Level 4 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 650 hp * Up to 600 lb.-ft. of torque * Stall: 2,600 to 4,000 * Custom-built and custom-stalled 10 in. or 11 in. billet racing lock-up converter * Master overhaul kit with Alto hardened steels * Raybestos Gen II racing frictions * Filter * 29-element dual cage sprag * High-capacity upgraded pump assembly * New hardened pump rings * New 13-vane pump rotor * New vanes * New stator * .500 boost valve * Pressure regulator valve * Updated boost valve * TransGo reprogramming shift kit with Shift Command * Complete Torrington bearing kit * Bushing kit * Thrust washers * Heavy-duty hardened sun shell * Heavy-duty expanded capacity input drum with reinforcing sleeve * High-rev spring kit * 5-pinion heavy-duty front and rear planetary gear sets with sun gear * Hardened output shaft * Hardened reaction shaft and hub * Super hold 4th servo * Corvette servo * Wide carbon fiber wide 2-4 band * New internal wiring harness with new TCC solenoid * New shift solenoids * New EPC solenoid * New PWM solenoid * New 3/2 solenoid * New manifold pressure switch * New electronic speed sensor * New valve body spacer plate * New OE steel transmission pan * Transmission mount

3.5 out of 5 stars ( 2 )

$6,945.00

Mopar Performance 6.2L Supercharged Hemi Crate Engines

Mopar Performance 6.2L Supercharged Hemi crate engines exert a monstrous 707 hp and 650 lbs.-ft. of torque. These complete Hellcrate engine assemblies includes water pump, flywheel and clutch, front sump oil pan, intake manifold with throttle body, fuel injectors and coil packs. You've asked for it and Mopar delivered. Features and specs include: * 376 cu. in. * 103.9mm bore * 90.9mm stroke * Cast iron block with 4-bolt powder metal main caps * Forged steel crank material * Connecting rods and floating pins with diamond-like coating * Forged piston material * Nodular iron camshaft * Valve/lift duration at 0.15mm: Intake--14.25(0.561)mm, 278 degrees, hollow stems Exhaust--14.0(0.551)mm, 304 degrees, sodium-filled stems * 356 aluminum, HEMIspherical chamber cylinder heads * 54.3mm intake valve size * 42mm exhaust valve size * 9.5:1 compression ratio * 6,200 max rpm

Not Yet Reviewed

$17,834.99

2019 DODGE Parts and Accessories