Availability
Showing In Stock Items. Show All 114 Items.
ACDelco spark plug wire sets meet or exceed original equipment specifications for fitment and performance. They're made from top-quality materials, so you know they'll last. The assembled ignition wires are available with different terminal ends and boot ends. Over 700 sets are available to cover virtually any vehicle on the road today. Order the spark plug wires recommended for your application.
( 146 )
$64.99
Morimoto projector headlight conversion harnesses are designed to adapt the 2009+ Dodge Ram projector-style headlights onto trucks that came standard with the basic dual halogen headlamps. The harnesses enable you to upgrade to the most modern Ram look without cutting, splicing, or modifying anything on the truck's factory harness. It's a seamless plug-and-play solution to keep your low and high beams under control on the new OEM projector lights using the original controls inside the cabin. The outputs will plug directly into the multi-pin connector on the back of each headlight from Dodge. Note: These adapters are tested and work on OEM/TYC headlights. At this time, they do not work on DEPO aftermarket headlights.
( 2 )
$94.00
ICT Billet LS ignition coil wiring harness extensions are assembled with OEM tooling, connectors, locks, seals, and terminals. They utilize factory harness wire colors. Compatible with any GM LS engine, these extensions are great for remote locating coils under the engine for a custom look. Don't take a chance with cheap wire connectors that use poor-quality components and have conductivity issues. Choose ICT Billet LS coil wire harness extension length and model recommended for your application.
( 2 )
$105.99
The average vehicle today has hundreds of wiring connectors. ACDelco connectors are available for everything needed, from antennas to trailer wiring, as well as an array of multi-purpose connectors to maintain the optimal operation of your vehicle. Choose GM-recommended replacement wiring connectors to ensure the same performance, durability, and service life you've come to expect from General Motors products.
( 35 )
$64.99
Fleece Performance offers wiring pigtails and replacement connectors for a wide range of vehicles—including many Dodge, Chevrolet, GMC, Ford, and Ram models from the 1990s and up. These replacement parts are ideal for sensors, starter solenoids, cooling fans, and other components under the hood. Fully automated in-house wire cutting and terminal crimping ensure you get the highest quality connectors and pigtails to get your car or truck back on the road quickly. Order the model that corresponds to your electrical application.
( 2 )
$56.99
—
$59.99
2018+ Dodge/Chrysler/Jeep vehicles all have a new security module that renders the OBD2 port inoperable for all aftermarket devices and tuners. Z Automotive double bypass kits overcome that obstacle by installing a secondary OBD2 port in the trunk, bypassing the security module. The quick plug-and-play installation takes under 5 minutes—with no wire splicing or cutting. The double bypass harnesses will also work on 2011-17 Chargers/300s and 2015-17 Challengers, for those who want to relocate their Z Automotive devices to the trunk, freeing up the factory OBD2 port for their Diablo Sport / SCT / HP Tuners device.
( 3 )
$55.00
ACDelco offers various electrical switches—including door lock, turn signal, ignition, trunk, HVAC, sensors, dimmers, brake lights, windshield wipers, and more for most vehicles on the road today. These replacements are manufactured to original equipment specifications to ensure proper fitment and performance. Order the switches recommended for your applications.
( 58 )
$54.99
—
$71.99
Hella battery master disconnect switches allow interruption of the main battery cable for effective protection. The positive or negative cables can be switched off as required. The keys can be removed while in the off position and the current is interrupted. Keep your things protected when you're not around.
( 43 )
$107.99
When you need to make automotive repairs, ACDelco's selection of replacement wiring harness connectors offers you the best fit and function sockets and pigtails to do a variety of jobs. These quality-built, OE-like connectors and adapters provide you with efficient, less costly repair options for GM and American Motors vehicles. They're available in male or female, with an assortment of pins/cavities to fill your needs. Service your vehicle with a name you know and trust--ACDelco.
( 24 )
$50.99
Dozens of sensors, lights, motors, and switches—nearly every accessory on your vehicle is powered through a wiring circuit. When any of those electrical components begin to fail, Motorcraft wiring connectors can help restore proper operation. For repairs or replacement on Ford, Lincoln, and Mercury vehicles, in particular, Motorcraft carries a full line of wiring pigtails and connectors for countless applications, using technologies that exactly replicate the OEM products. Depend on Motorcraft for precision electrical parts with the fit, form, and function you need!
( 8 )
$59.99
—
$103.99
ICT Billet has your LS swap covered with ICT Billet wiring pigtails. Options are available for standard and extended lengths on a multitude of applications. All designed to work with OE sensors for the easiest installation possible!
( 10 )
$58.99
Nitrous Outlet switch panels are designed to give you a clean look—and make using multiple nitrous-related options easier to manage with the use of large, easy-to-reach switches. These panels are constructed of water jet-cut aluminum and have a black anodized finish and a custom fit. They'll work with any brand of nitrous system and accessories, and with no drilling needed, will mount to your cup holder, ashtray, or console, depending on the application.
( 17 )
$83.99
—
$94.99
Certain multiple displacement solenoids (MDS) have plastic housings and low-grade O-rings that fail in extreme heat. Dorman engine cylinder deactivation solenoids upgrade the plastic housing to aluminum and add premium, compression-tested O-rings to prevent premature failures. They include a new gasket and mounting bolt for a complete repair. Dorman engine multiple displacement system solenoids are application specific—made to directly replace the original MDS on certain Chrysler, Dodge, and Jeep applications from 2005-09.
( 1 )
$68.99
Motorcraft turn signal switches are designed and tested under stringent standards to ensure durability and reliability in extreme conditions. They resist abrasion and environmental corrosion, and are easy to install, utilizing plug-and-play installation--no cutting or splicing is required. Recommended by the Ford Motor Company, Motorcraft parts provide exceptional quality and fit.
( 1 )
$70.99
No doubt the aluminum F150 is a capable truck, and if you've already upped the ante by making more power, new wheels, and fatter tires, then it's time to ditch the stock lighting setup too. Morimoto's unbeatable XB LED fog lights have been top sellers forever, and now the lineup expands with offerings such as the new high performance XB LED taillights! * COMPATIBLE: With all Non-BLIS F150s from 2015-20, these complete taillight assemblies will swap directly in place of the original F150 taillights, use all of the stock mounting points, and should only take around 30 minutes to install. * PLUG-N-PLAY: Wiring is easy too! The XB LED tails are designed to work without any special wiring (2018-20 do require the optional harness). They will plug into the factory connectors for the stock lights; and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug-n-play install. No additional resistors, modules, etc. needed! NOTE: 2018-20 F150S REQUIRE THE OPTIONAL HARNESSES, HOWEVER THESE ARE STILL NOT COMPATIBLE WITH OEM LED OR OEM BLIS TAILLIGHT-EQUIPPED TRUCKS. * STYLE: While they look radical, they don't look out of place like other aftermarket options. The geometry flows with the body lines like a boss. The XB LED tails for your F150 are available with either a smoked or red lens. Both will illuminate red. * WELL-BUILT: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The injection molded ABS housing is lightweight and much stronger than comparable cheap alternatives. The XB taillights may not be the cheapest new taillights for your F150, but they're OE quality.
Not Yet Reviewed
$56.00
Dorman power window switches are high-quality replacements to facilitate the ups-and-downs of window operation. They're designed to meet all OEM specifications and install in the stock location. Dozens of styles are available for fitment in specific vehicles.
( 75 )
$62.95
—
$106.95
These Nitrous Express NX accessory power switch panels offer a clean and attractive solution for nitrous systems. These switch panels feature laser etched switch labels for a truly professional look!
( 7 )
$76.43
—
$79.80
Nitrous Express nitrous solenoid brackets provide handsome options for mounting. Whether on the intake, cylinder head, throttle body, or carb flange, NX offers strong, precision-cut steel and aluminum versions to secure your solenoids in the perfect location. Make your nitrous install quick and easy, while looking clean and attractive with Nitrous Express nitrous solenoid brackets.
( 18 )
$76.43
ACDelco GM Genuine Parts taillight harnesses are organized sets of wires, terminals, and connectors that run throughout your entire vehicle, and are GM recommended replacements for your vehicle's original components. These harnesses relay information and electrical power to your vehicle's taillights, brake lights, and turn signals. ACDelco original equipment tail light harnesses have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 1 )
$80.99
High-quality, direct-replacement Standard Motor wiring connectors help eliminate the need for a harness by letting you swap only the damaged connector for a cost-effective repair solution. The terminals feature high-grade materials like copper alloy, brass, and phosphor bronze. Together they provide the connectors with prolonged life and superior performance in harsh environments for each specific application. Standard Motor electrical connectors are 100 percent tested for the proper mechanical and electrical fit, form, and function for your vehicle.
( 139 )
$52.99
—
$109.99
Dorman power seat switches restore the safety, ease, and convenience of controlling your seat's position. They are engineered from high-quality materials for a long service life, and they are tested to ensure trouble-free operation. Designed as direct replacements to match the size, function, and appearance of the original, Dorman switches provide you with renewed, effortless control.
Not Yet Reviewed
$63.99
—
$70.99
Morimoto XB LED headlight adapters allow you to upgrade your existing units. These headlight adapters retain all OE functions and make installation of the XBs a simple plug-and-play operation. Morimoto headlight adapters are vehicle-specific, choose the correct XB LED connection for your vehicle.
Not Yet Reviewed
$55.00
—
$109.00
Dorman engine oil accumulator solenoid valves are made from durable materials for reliable performance. Oil pump flow control valves often fail from varnish build-up, and the original manufacturer requires replacing the entire oil pump assembly. These Dorman oil pump flow control valves are quality replacements for a clogged or damaged original equipment control valve and are an excellent value compared to the original equipment part.
Not Yet Reviewed
$57.19
CURT towed-vehicle RV harnesses are the ideal solution to connecting your vehicle's electrical system to your RV while dinghy towing. Each RV harness is made for a vehicle-specific application, using OEM-compatible plugs to "T" into the vehicle's wiring without any need for cutting or splicing. With a towed-vehicle RV harness installed, hitching up your vehicle behind your RV is fast and easy. Simply plug the provided 4-way flat connector from the front of the vehicle into the RV's 4-way flat socket. The RV harness uses the vehicle's existing taillights, turn signals, and brake lights, eliminating the need to purchase additional lighting. The vehicle's lights can operate in conjunction with your RV's lights, signaling other drivers and functioning just like a standard trailer in tow. Along with their plug-and-play design, these custom harnesses are also built for lasting durability. Each harness features integrated block diodes that isolate the vehicle's electronics from the RV signals in a way that protects them from overheating and short circuiting. CURT towed-vehicle RV harnesses come with a 4-way flat extension to reach the RV connector socket, a mounting bracket to help keep the wires ordered and protected on your vehicle, and all the necessary hardware for a complete installation.
( 1 )
$102.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
