Availability
With S&S Cycle's wide selection of Harley-Davidson® parts, you're sure to find the parts you're looking for, including head bolt kits. These kits include steel 12-point head bolts and washers that are designed to exceed the needs of your high performance engine.
( 1 )
$137.66
S&S Cycle Top End Guardian kits include everything needed to strengthen the top-end of your M-Eight engine. They're available for a wide range of Harley-Davidson® bikes. Each kit includes S&S rocker arm stud kit and S&S rocker arm shafts. Additional product details: * Rocker arm shafts are more durable than the stock arms * Roller rocker arms relieve additional stress caused by high-lift camshafts running and high rpms * Rocker arm stud kit extends the life of your cylinder heads by preventing damage to the rocker arm towers * Head bolt kit is made of 8640 heat-treated steel with 200,000 psi tensile strength * Cold-rolled threads and formed washer make these head bolts durable and reusable Included Items: (8) 7/16 in.-14 head bolts (4) Rocker arm shafts (8) 5/16 in.-18 / 5/16 in.-24 studs (8) 5/16 in. 12-point nuts (1) Loctite #262 (4) Roller rocker arms Instructions
Not Yet Reviewed
$826.16
S&S Cycle precision tappets are high performance replacements for S&S Cycle's previous standard and premium lifters for M8, Twin Cams, and late Sportster applications. Each precision tappet is hand assembled to exacting tolerances and designed for quiet operation and rapid pump up. Features and benefits: * Reduced valve train noise from start-up to shut down * Close tolerances for low leak-down rates * Fast pump up and superior high-rpm performance
Not Yet Reviewed
$251.96
S&S Cycle standard forged rocker arms are designed for superior strength and to eliminate the failure-prone stress areas found in other rockers. These replacement arms are forged from 8620 steel, heat-treated, and then shot-peened for additional strength. They feature 3/4 in. long bronze bushings, compared to the more common 1/2 in. long bushings or needle bearings. S&S Cycle roller arms are available in the stock 1.625:1 ratio and 1.725:1 ratio. Order the set recommended for your bike model.
Not Yet Reviewed
$294.26
S&S Cycle oil filters are constructed out of a sturdy steel canister, which houses the finest filtering media and internal components available. The filter media has traps to catch the smallest particles possible but not restrict flow. The filters are available in a black or chrome finish to accent your ride properly. With S&S Cycle oil filters you'll keep your oil clean and your engine protected.
( 1 )
$165.56
—
$260.06
Tap into the power of your Milwaukee 8 engine by installing an S&S Cycle camshaft. These kits will increase the torque and horsepower of your bike. They include all required gaskets, O-rings, bearings, and hardware. Order the model recommended for your Harley-Davidson® application.
Not Yet Reviewed
$211.46
—
$269.96
S&S Cycle offers you superior valve train control for your motorcycle with their cam chain tensioners. They provide a thicker shoe, a larger piston, direct chain oiling, and tighter tolerances for improved stability and longer wear life over the stock cam chain tensioners. Order the S&S cam chain tensioners designed for your bike.
Not Yet Reviewed
$94.46
S&S Cycle roller rocker arms were designed for superior strength and to eliminate the failure-prone stress areas found in other rockers. These replacement arms are forged from 8620 steel, heat-treated, and then shot-peened for additional strength. They feature 3/4 in. long bronze bushings, compared to the more common 1/2 in. long bushings or needle bearings. S&S Cycle roller rocker arms are available in 1.500:1 ratio, 1.625:1 ratio and 1.725:1 ratio. Order the set recommended for your bike model.
Not Yet Reviewed
$550.76
—
$587.66
S&S tappet cuffs capture the tappets without impacting vertical motion and keeping them perfectly aligned, even in high-stress, high-rpm situations. Factory tappet guides are constructed of plastic and are at risk for allowing the tappets to twist under heavy stress. S&S Cycle tappet cuffs offer proven performance as they're made from billet aluminum and are more durable than your old, stock plastic guides.
Not Yet Reviewed
$76.46
S&S Cycle offers heavy-duty valve spring kits to upgrade your bike's performance—so you don't have just another "me too" motorcycle. Order the S&S Cycle heavy-duty valve spring kit designed for your bike's application. Features and specifications: * Available for M8 2017-2024 Harley-Davidson® models * Kit includes springs, top collars, keepers, valve seal/bottom collars * Works well with cams up to .605 in. lift * High performance conical single wire spring
Not Yet Reviewed
$356.36
Easily installed, easily removed--S&S Cycle Quickee adjustable pushrods are designed for a simple, trouble-free installation that does not require removal of the gas tank, rocker assemblies, or even the rocker box cover! Innovative Quickees feature threaded adjusters that screw into the pushrods until the threads disengage and the adjuster simply slides into the pushrods, making your installation or removal easy. Then, once the pushrods are installed and adjusted, the locknut keeps the adjuster from moving. They will work with stock and aftermarket cams, as well as stock pushrod covers. S&S proven performance makes life easier with their Quickee adjustable pushrods.
( 1 )
$283.46
—
$301.46
S&S Cycle offers MK136 Black Edition engines for a variety of Harley-Davidson© oil-cooled Touring street bikes from 2017 and up. Details include: CYLINDER HEADS: * High-flow cylinder heads with premium seats, guides, valves, springs, and seals * +1mm oversized intake and exhaust valves * Valves are .030 in. longer than stock for improved valvetrain geometry * .605" max lift valve springs * High-strength alloy used in cylinder head casting, improved strength at high temperatures * Enlarged cooling passage around the exhaust seats * S&S Exclusive breather boxes CRANKCASE: * All premium quality components * Patented dual-spray piston cooling jets * Precision-machined oil scraper * Enlarged oil sump * Contoured floor allows oil to easily drain back to the sump MK136: * Forged pistons * S&S performance oil pump and cam support plate * Premium tappets and tappet cuffs * Billet aluminum covers * Sprocket shaft spacer included * Champion spark plugs * Retains stock engine height * Includes cam cover badge * Powdercoat finish matches factory finish * Huge displacement increase means a huge power increase
Not Yet Reviewed
$11,999.95
Upgrade your entire cam chest with S&S Cycle Milwaukee 8 chain drive cam chest kits! The parts in each kit are matched to ensure superior quality, fit, finish, and performance, and will include the necessary gaskets, components, and hardware required for a complete installation. S&S Cycle chain drive kits are available for water-cooled and oil-cooled motorcycle models. Select the kit designed to fit your bike. Features of Milwaukee 8 chain drive cam chest kits: * Oil pump and cam plate are precision-machined from billet aluminum with a blue anodized finish * Passage plugs are removable for servicing * Independent scavenge sections for the flywheel cavity and cam chest * Debris screens in both scavenge pickups * Magnet in cam helps stop debris from entering oil pump * Increased oil flow capacity on both the feed and scavenge sides * Adjustable pressure relief valve is adjustable with the unit installed in the engine * S&S Quickee pushrods with chrome or gloss black pushrod tubes * S&S premium tappets—hand assembled to exacting tolerances; reduced valve train noise from start up to shut down * Billet aluminum tappet cuffs have a hard-anodized black coating and are stronger than stock to eliminate distortion and improves tappet stability in high-lift situations * Precision machined billet aluminum cam chain tensioner * 465 Torque cam kits are the ideal choice for Touring bike applications * 475 kits are bolt-in cams that can produce up to 100 horsepower * 540 kits are designed to add even more stump pulling torque to your big bore M8, for those that keep the revs below 6,000 rpm—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift * 550 kits are for use with large displacement engines—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift
Not Yet Reviewed
$1,499.95
—
$1,621.95
S&S Cycle Milwaukee 8 gear drive cam chest kits include everything necessary to convert to gear drive for improved cam timing accuracy and eliminate the stock cam chain tensioner. All parts in each kit are matched to ensure superior quality, fit, finish and performance. Each kit includes necessary gaskets, components, and hardware required for a complete installation. S&S gear drive kits are available for water-cooled and oil-cooled motorcycle models. Select the kit designed for your bike. Features of Milwaukee 8 gear drive cam chest kits: * Oil pump and cam plate are precision-machined from billet aluminum with a blue anodized finish * Passage plugs are removable for servicing * Independent scavenge sections for the flywheel cavity and cam chest * Debris screens in both scavenge pickups * Magnet in cam helps stop debris from entering oil pump * Increased oil flow capacity on both the feed and scavenge sides * Adjustable pressure relief valve is adjustable with the unit installed in the engine * S&S Quickee Pushrods with chrome or gloss black pushrod tubes * S&S premium tappets—hand assembled to exacting tolerances; reduced valve train noise from start up to shut down * Billet aluminum tappet cuffs have a hard-anodized black coating and are stronger than stock to eliminate distortion and improve tappet stability in high-lift situations * Outer drive gears included * 465 Torque cam kits are the ideal choice for Touring bike applications * 475 kits are bolt-in cams that can produce up to 100 horsepower * 540 kits are designed to add even more stump pulling torque to your big bore M8, for those that keep the revs below 6,000 rpm—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift * 550 kits are for use with large displacement engines—requires the addition of valve springs (included in high lift kits) and works with cams up to .605 lift
Not Yet Reviewed
$1,599.95
—
$1,815.95
An 883 to 1200cc Hooligan cylinder kit for a Harley-Davidson®, like the ones made by S&S Cycle, provides a significant increase in engine displacement, resulting in substantially more power and torque without requiring major engine modifications, making it a popular upgrade for riders seeking better performance on their Sportster 883, with benefits like increased horsepower—by boosting the engine size from 883cc to 1200cc, the Hooligan kit delivers a noticeable power gain, allowing for better acceleration and highway cruising capabilities. Typically these kits are designed as "bolt-on" upgrades, meaning they can be installed without needing extensive machining or engine rebalancing, making the process relatively simple and straightforward. Compared to a complete engine rebuild, a Hooligan kit is a cost-effective way to significantly improve your bike's power. When installing a Hooligan kit, it may be necessary to upgrade the clutch to handle the increased torque produced by the larger engine. Depending on the specific kit and your bike setup, you may need to adjust fuel injection mapping to optimize performance.
Not Yet Reviewed
$1,742.95
S&S Cycle Milwaukee 8 chain drive camshaft and Dynojet PV-3 kits are the first of their kind, offering a 475 cam, tuner in chain drive, and true 100+ hp at the wheel in one package. The kits are designed to work specifically with S&S's Stealth air cleaner kits and Mk45 mufflers with a stock header or their Eldorado exhaust system. Features and benefits: * Bolt-in performance * No need for expensive dyno tuning * Display vehicle data channels in real-time * Weather-resistant for use in all conditions * High-contrast display, viewable in direct sunlight Please note: * PV-3 module is preloaded with calibrations developed by S&S. These calibrations are secure and do not allow for any modifications. * Calibrations do not work on any Harley-Davidson® Softail models. * Calibrations do not work on 2020+ Harley-Davidson® Touring Models.
Not Yet Reviewed
$566.06
S&S Cycle offers M8 oil pump and cam plate money-saving kits for a variety of Harley-Davidson© street bikes from 2017 and up. They're available for oil-cooled or water-cooled Touring models. The units are precision-machined from billet aluminum with a blue anodized finish—and include independent scavenge sections for flywheel cavity and cam chest. Additional details: * Debris screens in both scavenge pickups * Magnet in cam chest to help prevent debris from entering pump * Increased flow capacity on both feed and scavenge side * Adjustable pressure relief valve can be adjusted with unit in engine * Passage plugs are removeable for servicing * Water-cooled model 310-0997B: 44 percent flow increase on supply side and 58 percent flow increase on scavenge * Oil-cooled model 310-0998B: 20 percent flow increase on supply side and 52 percent flow increase on scavenge
Not Yet Reviewed
$836.95
Inspired by S&S Pro Stock drag race engines, S&S Cycle 124 in. big bore kits utilize a ductile cast iron liner wrapped in cast aluminum for optimum thermal conductivity and performance. These bolt-in kits do not require machining, re-balancing or engine removal, and include just about everything you'll need to complete the installation. S&S Cycle 124 in. big bore kits are available in wrinkle black or wrinkle black with highlighted finned cylinders. Transform your stock engine into a 124 in. monster with the installation of a 124 in. big bore kit from S&S Cycle! S&S Cycle 124 in. big bore kit features: * Available for 107 M8 models * 107 to 124 in. big bore kit * Bolt-on kit * Includes gaskets and hardware required for installation * 4.250 in. bore * Forged Pistons * 11:1 compression ratio
Not Yet Reviewed
$1,405.76
S&S Cycle offers 128 in. power packages with chain drive cam for a variety of Harley-Davidson© street bikes from 2017 and up. Kit details include: BIG BORE KIT: * 4.250 in. bore * Forged pistons * 11.1:1 compression ratio OIL PUMP/CAM PLATE: * Precision-machined from billet aluminum * Passage plugs removable for servicing * Independent scavenge sections for flywheel cavity and cam chest * Debris screens in both scavenge pickups * Magnet in cam chest to help stop debris from entering oil pump * Increased flow capacity on both feed and scavenge side * Pressure relief valve is adjustable with unit installed in engine * Kits now include updated oil pump with groove for optional OEM oil seal PUSHRODS: * Quickee pushrods with chrome covers TAPPETS: * Hand-assembled to exacting tolerances * Reduced valvetrain noise from start-up to shut-down * Close tolerances for low leak-down rates * Fast pump-up and superior high-RPM performance TAPPET CUFFS: * Hard anodized black coating * Billet aluminum construction * Stronger than stock material eliminates distortion * Improve tappet stability in high lift and high RPM situations CAM: * S&S 550 cam—designed for big bore applications * Available in both chain drive and gear drive variations VALVE SPRINGS: * Work well with cams up to .605 lift * High performance conical single-wire spring * Includes top collars, keepers, and valve seals/bottom collars CAM CHAIN TENSIONER: * Precision-machined from billet aluminum * Thicker shoe for longer wear * Direct chain oiling * Larger piston for more consistent pressure * Tighter tolerances improve stability
Not Yet Reviewed
$3,265.95
S&S Cycle offers 128 in. power packages with gear drive cam for a variety of Harley-Davidson© street bikes from 2017 and up. Kit details include: BIG BORE KIT: * 4.250 in. bore * Forged pistons * 11.1:1 compression ratio OIL PUMP/CAM PLATE: * Precision-machined from billet aluminum * Passage plugs removable for servicing * Independent scavenge sections for flywheel cavity and cam chest * Debris screens in both scavenge pickups * Magnet in cam chest to help stop debris from entering oil pump * Increased flow capacity on both feed and scavenge side * Pressure relief valve is adjustable with unit installed in engine * Kits now include updated oil pump with groove for optional OEM oil seal PUSHRODS: * Quickee pushrods with chrome covers TAPPETS: * Hand-assembled to exacting tolerances * Reduced valvetrain noise from start-up to shut-down * Close tolerances for low leak-down rates * Fast pump-up and superior high-RPM performance TAPPET CUFFS: * Hard anodized black coating * Billet aluminum construction * Stronger than stock material eliminates distortion * Improve tappet stability in high lift and high RPM situations CAM: * S&S 550 cam—designed for big bore applications * Gear drive kits provide improved cam timing accuracy and eliminate stock chain tensioner * Gear drive kits include outer drive gears VALVE SPRINGS: * Work well with cams up to .605 lift * High performance conical single-wire spring * Includes top collars, keepers, and valve seals/bottom collars
Not Yet Reviewed
$3,460.95
S&S Cycle offers 129 in. power packages with gear drive cam for a variety of Harley-Davidson© street bikes from 2017 and up. These packages are the ideal combination of performance and savings designed to transform your engine from mild to wild. They combine S&S's biggest big bore cylinders with matched 550 cam/cam-plate/oil pump and everything else a high performance cam chest needs to make big, reliable horsepower. Transform your 107 in. into a 129 in. monster. Additional details: * Available with 129 in. Big Bore pistons/cylinders * 550 lift cam for the perfect combination of horsepower and torque * Works with stock crankcases * Powdercoat finish matched to factory * MLS (multi-layered steel) head gaskets * Includes tappets, tappet cuffs, and high lift springs * Includes 129 cam cover badge
Not Yet Reviewed
$3,559.95
S&S Cycle offers 129 in. power packages with chain drive cam for a variety of Harley-Davidson© street bikes from 2017 and up. These packages are the ideal combination of performance and savings designed to transform your engine from mild to wild. They combine S&S's biggest big bore cylinders with matched 550 cam/cam-plate/oil pump and everything else a high performance cam chest needs to make big, reliable horsepower. Transform your 107 in. into a 129 in. monster. Additional details: * Available with 129 in. Big Bore pistons/cylinders * 550 lift cam for the perfect combination of horsepower and torque * Works with stock crankcases * Powdercoat finish matched to factory * MLS (multi-layered steel) head gaskets * Includes tappets, tappet cuffs, and high lift springs * Includes 129 cam cover badge
Not Yet Reviewed
$3,359.95
S&S Cycle roller rocker arm complete rebuild kits offer several benefits for Harley-Davidson® motorcycles, including significantly reduced friction on the valve stem, improved valvetrain longevity, increased horsepower potential, especially at higher rpm's, and smoother engine operation. These kits also offer better compatibility with high-lift cams due to the reduced wear and side load on the valve stem from the roller design; essentially providing better overall performance and durability compared to stock rocker arms. Order the rebuild kit designed for your HD® model. Features and benefits: * Complete kit includes roller tips, roller pins, roller pin retaining clips, and rocker arm bushings to rebuild a set of four S&S forged roller rocker arms * Designed using Finite Element Analysis (FEA) and forged from 8620 steel for strength * The roller design minimizes friction on the valve stem, leading to less wear and tear on both the valve stem and rocker arm, extending the lifespan of the valvetrain components * The roller bearings in the rocker arms distribute the load more evenly, leading to better wear resistance compared to traditional sliding contact on stock rockers * Roller rockers are designed to handle the increased valve lift associated with performance cams without excessive wear or stress on the valvetrain * Rocker geometry is better suited to high-lift camshafts * Bushings are longer than stock, increasing the time between rebuilds * The smooth rolling action of the roller bearings can contribute to a quieter engine operation * Compatible with stock or S&S CNC-machined heads * Many high-quality roller rocker arm kits are designed to be serviceable and rebuildable, allowing long-term use with proper maintenance Notes: When installing roller rockers, it's important to choose a camshaft that is compatible with the increased valve lift capability. Also, precise installation is crucial to ensure optimal performance and avoid potential issues.
Not Yet Reviewed
$167.95
Why settle for ordinary, when you could rock your ride with S&S Cycle rocker arm bushings! They are perfect for those who crave a risk-taking, bold approach to performance. So, when your engine is down and you're doing the top end, S&S Cycle rocker arm bushings are just what you need. They are far superior than the rest and will hang-in there—even when the going gets tough. Select the rocker arm bushings for your application needs.
Not Yet Reviewed
$13.46
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
