Availability
These lifters are for use with the newly designed Hydraulic Roller Cam Series from COMP Cams—or as replacements for stock hydraulic roller lifters. You must be certain that the lifter is correct for the type of block used, because some later model blocks require special lifter designs. Order the model tailored for your engine application.
( 18 )
$517.95
COMP Cams HRT Stage 1 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles designed to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. COMP Cams HRT camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250 percent improvement in the effective load bearing area, allowing for much higher loads. All HRT Stage 1 camshafts do not require upgraded valve springs.
( 1 )
$579.95
—
$605.95
COMP Cams HRT Stage 2 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles designed to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. These new HRT camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250 percent improvement in the effective load bearing area, allowing for much higher loads.
( 1 )
$605.95
COMP Cams LSR Series hydraulic roller camshafts feature modern lobe profiles that take full advantage of high-flowing late model GM LS3 rectangular port cylinder heads. They are tailored for a specific rpm range and usage, from torque to high-rpm horsepower. Give your Chevy LS3 engine a shot in the arm with one of these COMP Cams LSR Series hydraulic roller camshafts.
( 26 )
$541.95
—
$566.95
COMP Cams DOD delete kits allow for removal of the displacement on demand (DOD)/active fuel management (AFM) systems that disable four engine cylinders under light-load conditions to improve fuel economy, but also limits performance in the process. COMP Cams delete kits are available in basic, standard, and premium levels with all the necessary components for each application.
Not Yet Reviewed
$743.95
COMP Cams Thumpr NSR Hemi Gen III/IV camshafts bring the wildly popular Thumpr sound to late model Hemi engines, while offering big power gains and no need to upgrade valve springs. The cams are made from billet steel cores for increased strength—and require no springs for a far easier installation. Great in naturally aspirated or supercharged applications, COMP Cams Thumpr NSR Hemi Gen III/IV camshafts provide excellent performance in mid- to upper-rpm ranges. Order the model designed for your vehicle and engine application.
Not Yet Reviewed
$605.95
COMP Cams Evolution Series hydraulic roller lifters with Hydraulic Cartridge Technology (HCT) are revolutionary patented tappets. A combination of a self-contained hydraulic cartridge within a thick-wall lifter body and accompanying reduced oil volume that is less effected by oil aeration delivers the most consistent bleed rates between each lifter on the market. The smaller volume within the hydraulic cartridge creates one of the most responsive and quietest lifters on the market today. Startup noise is greatly reduced, and a precision-controlled bleed down rate ensures excellent performance at high RPM. The cartridge design also allows for an incredibly stiff lifter body, greatly reducing body distortion and further ensuring consistent hydraulic performance. The patented HCT tappets are a completely new design that was developed specifically by COMP Cams to meet the demanding performance and durability required for modern street and performance street engines. The HCT and proprietary manufacturing processes of these lifters ensure precision and longevity that exceed any lifter on the market. Other features include increased duration and lift to the camshaft and two oiling features. Another industry first is the fact that the hydraulic element of this patented lifter is serviceable, allowing anyone to rebuild lifters in his or her own garage. Order the Evolution lifters recommended for your year/make and engine application.
( 13 )
$646.95
Utilizing years of valvetrain design experience, the latest FEA stress analysis technology, and an exhaustive testing regiment (dyno and Spintron), COMP Cams engineering team left no detail to chance. Everything from casting techniques to valve spring clearance was scrutinized to ensure that Ultra Pro Magnum rocker arms not only lived up to the lofty standards of their predecessor, but also took stud mount rocker performance, stability, and value to a whole new level. The most noticeable advancement centers around their nearly unbreakable investment cast 8650 chromoly body. The arched, web-like design delivers a nearly 29 percent increase in strength and rigidity, while reducing the moment of inertia and optimizing the dynamic balance. The resulting rockers maximize lift and valvetrain control at high rpm. The increased retainer and valve spring clearances of the new design enable the use of large-diameter valve springs, retainers, and locks, without clearance or fitment issues. The new black oxide exterior finish offers a distinctive appearance, along with long-term corrosion resistance. The COMP Cams Ultra Pro Magnum rocker arms feature an oversized trunnion and precision-sorted needle bearings designed for use with high-load valve springs. These unique rockers also feature hardened roller tips for reduced friction and elimination of the valve stem "side loading" that causes premature valve guide wear.
( 204 )
$541.95
COMP Cams LST Series solid roller camshafts deliver "Low Shock Technology." These LST cams feature lobe profiles designed to maximize horsepower, while improving stability at higher rpm. They're also easier on the valve springs, enhancing durability and reducing load loss. For maximum horsepower with either stock or aftermarket pistons (choose the model suited to your application), COMP Cams LST Series solid roller camshafts are an excellent option for your build.
Not Yet Reviewed
$541.95
COMP Cams XFI RPM high-lift cams have been designed to increase horsepower and extend the rpm range of your engine. Made for applications where a high-lift is necessary, these cams have the power to help you meet your performance goals.
( 3 )
$541.95
COMP Cams Xtreme fuel injected camshafts are designed for late model applications. Ground using faster-opening and more efficient ramp profiles, Xtreme camshafts are engineered for 1.6 ratio rocker arms and beehive valve springs, which provide a dramatic increase in torque and horsepower.
( 29 )
$579.95
COMP Cams has awakened the muscle car sound--and it is nastier than ever! Thumpr Series camshafts is a line of cutting-edge hydraulic roller camshafts for engines originally equipped with flat tappet cams. With them, you can expect a substantial power increase without sacrificing reliability or ease of maintenance! The lobe profile and grind characteristics of Thumpr cams include blending an early exhaust valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap. This maximizes rough-idling tendencies, delivering a seriously aggressive exhaust note without affecting engine power output. Thumpr camshafts are available in a variety of grind profiles, each producing impressive horsepower and torque performance within a different rpm range.
( 17 )
$541.95
COMP Cams XFI RPM camshafts pull your performance set up all together. Offering the newest and quickest lobe profiles, their selection of XFI RPM cams get you the best combination of torque, horsepower, and even gas mileage (if you want) to tailor your application. Make the right choice in valvetrain technology; you have a goal and so does COMP Cams--reliable high performance!
( 11 )
$541.95
COMP Cams billet LS valve covers start from a block of billet aluminum and end with a stunning anodized finish. Specifically designed for your LS engine, these valve covers will fit with an easy installation. Put these COMP Cams billet LS valve covers on your shopping list and upgrade the look of your engine bay.
( 2 )
$612.99
Comp Cams turbo and blower HRT camshafts are available in a variety of mild-to-aggressive styles. These replacement hydraulic roller tappet models work with your blower, turbo, or supercharger to help provide the most power possible. Choose the grind and options needed for your vehicle and engine application.
( 1 )
$605.95
COMP Cams HRT Stage 3 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles engineered to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. COMP Cams HRT Stage 3 cams receive the Micro Surface Enhancement (MSE) finishing process as a standard feature to increase strength and performance by reducing surface peak roughness. This also provides noticeable improvement in the effective load bearing area, thus allowing for much higher loads. Order the model recommended for your vehicle and engine application.
( 1 )
$605.95
COMP Cams Chrysler Hemi phaser camshafts utilize Variable Valve Timing (VVT) technology to maximize power and performance in stock and street/strip applications. The new Hemi engines from Chrysler are great power plants straight from the factory, with technology that allows the camshafts to move in real time. Instead of scrapping this advanced system, COMP Cams has embraced it with a new line of aftermarket Hemi-specific cams. The patent-pending Hemi phaser camshafts work with phaser limiters or locks to fully utilize Chrysler's Variable Valve Timing (VVT) technology, which allows them to pick up torque in the low end of the engine, while maintaining power up high. Made from a billet core, these hydraulic roller cams are engineered tough enough to handle 5.7L and 6.4L Hemi street/strip engines. Their unique, no-springs-required design maintains piston-to-valve clearance, while enabling high performance lobes utilizing VVT, making them perfect for late model Dodge Challengers, Dodge Chargers, Chrysler 300s, Jeeps, Dodge trucks, and Mopar crate engines with VVT. COMP Cams Chrysler Hemi phaser camshafts are available as both custom and three different off-the-shelf grinds, dependent upon engine type, for improved performance over OEM options. They will require the COMP Cams phaser limiter or lock kits to limit the degree of maximum cam phasing to 14 crank degrees (7 cam degrees) and they are available separately.
( 5 )
$605.95
COMP Cams LST Series hydraulic roller camshafts deliver "Low Shock Technology." These LST camshafts feature lobe profiles designed to maximize horsepower, while improving stability at higher rpm. They're also easier on the valve springs, enhancing durability and reducing load loss. From street durability to track power, COMP Cams LST Series hydraulic roller camshafts are an awesome choice for your build. The cams are available for a variety of engine, piston, and engine applications.
Not Yet Reviewed
$541.95
COMP Cams XFI XE-R camshafts are made for all-out racing. The aggressive lobe design of these cams can handle all the rpm you can throw at it.
( 7 )
$541.95
Revolutionary COMP Cams XFI AFM GM Gen V camshafts are designed to work with the direct-injection, VVT (variable valve timing), and AFM (active fuel management) lifters featured in GM's Gen V (LT1/L83/L86) V8 engine. They feature four different lobe profiles to both create AFM compatibility and optimize intake and exhaust valve opening/closing events. The camshafts increase torque and horsepower throughout the entire rpm range, while providing excellent responsiveness and midrange power over stock for across-the-board gains. The COMP Cams XFI AFM GM Gen V camshafts require the COMP Cams phaser limiter kit (sold separately), which limits the range of camshaft movement from 62 to 22 crank degrees, thus requiring PCM tuning.
( 3 )
$574.95
COMP Cams offers HV camshafts for a variety of objectives—such as drivability, towing, greater throttle response, moving peak torque to higher RPM in smaller displacement engines, and more. The cams deliver awesome performance gains (up to +94 hp), as well as increased torque across much of the operating range. They provide a deep rumble and mild, yet noticeable lope. Depending on your vehicle, HV cams are a great choice for engine swaps in full-size cruisers and daily drivers, including heavier vehicles (trucks/SUVs). Order the model recommended for your year/make and engine application.
( 1 )
$541.95
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.
( 298 )
$550.95
COMP Cams HV NSR Series camshafts are engineered for GM cathedral port LS engines and are drop-in camshaft upgrades designed to provide amazing drivability and throttle response in larger vehicles. These NSR (No Springs Required) cams required minimal tuning and provide increased torque across the entire rpm range with a significant horsepower bump. COMP Cams HV NSR Series camshafts will allow you to get the most out of your daily driver truck, SUV, or 4x4 without sacrificing street manners.
( 1 )
$541.95
COMP Cams XFI AFM GM Gen IV camshafts are designed to work with the VVT (variable valve timing) and AFM (active fuel management) components of GM V8 engines. They deliver outstanding top-end power in modified L99-style applications without sacrificing low-end power when properly programmed. Get an increase in performance with the lobe profile of COMP Cams XFI AFM GM Gen IV camshafts.
( 1 )
$649.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
