Availability
Showing In Stock Items. Show All 52 Items.
Hayden Rapid-Cool transmission oil coolers take the heat, so your vehicle won't! Over 14-million transmissions fail every year, and 9 out of 10 are from overheating. Rapid-Cool's unique plate and fin design combines cooling expertise and space efficiency; multiple sizes are available. Their patented internal turbulation provides better heat transfer. Lower your operating temps with a pioneer in cooling: Hayden!
( 162 )
$40.99
—
$61.99
Banks Power oil cooler upgrade kits improve heat reduction and performance of your Duramax engine. At the heart of each kit is GM's 2020 Duramax L5P oil cooler, rejecting heat better at the factory-rated 450 hp when tested against the earlier units, a difference that becomes even more apparent at higher engine speed and load--the higher the horsepower, the greater the improvement. Additional cooling plates and improved oil flow increase the available surface area utilized for heat transfer, shedding more BTUs of heat while maintaining proper oil pressure. Hardware, gaskets, and an AMSOIL EAO17 oil filter are included, as well as a pre-installed 1/8 in. NPT port for oil temperature/pressure sensors. Banks Power chooses to include an Amsoil EAO17 oil filter for its superior filtration properties and low oil pressure loss, exceeding OEM filtration specs with 99 percent efficiency at 20 microns. Key features: * Cools 31 percent or better * More cooling plates for better heat rejection * Increased cooling stack surface area * Pre-installed 1/8 in. NPT sensor port for temperature or pressure
( 2 )
$549.00
Completely re-engineered, these RevMax transmission cooler thermostatic bypass upgrades are a direct bolt-in replacement. No lines are cut, nothing is altered. Simply disconnect your old lines and install them onto your new RevMax bypass. Utilizing RevMax's ZeroStat Technology, these billet 6061 aluminum cooler thermostatic bypass upgrade modules completely remove the orifice restriction for full cooler flow all the time. This equates to lower operating temperatures and helps to prolong the transmission's life. Order the model for your application. Features and benefits: * RevMax's ZeroStat patented technology provides increase in cooler flow due to the elimination of the orifice bottleneck located in the factory part * Direct bolt-in replacement—no lines are cut, nothing is altered, simply disconnect your old lines, and install them into the RevMax new bypass * There is no thermal controlled bypass valve which can fail and cause lack of cooler flow and complete transmission destruction * Instead of closing off cooler flow when the transmission is cold and making your transmission generate unneeded heat that is hard to shed later; RevMax bypass allows your cooler to immediately begin cooling transmission and not waiting for it to get hot, just to try to cool it later * You cannot properly flush your cooler lines without the aid of a hot flush machine that can get hot enough to open the bypass valve up but with the RevMax bypass upgrade you can use room temperature fluid to clean out your cooler anytime you wish without any special tools! * Moules with integral aluminum cooling fins aid in passive cooling of the block and fluid
( 2 )
$89.00
Hayden Rapid-Cool transmission oil coolers with thermal bypass are ideal for colder climates. With their patented internal pressure bypass design, they will help your transmission reach optimum operating temperature quickly by routing the fluid through the bypass channel of the cooler until fluid temperature increases. Reaching operating temperatures faster improves fuel economy and reduces friction of internal components. Hayden's design incorporates an integrated valve that eliminates the need for external valves and additional plumbing at installation. Features and benefits: * Bi-directional flow * 33 percent more efficient than traditional coolers * High efficiency louvered fins and special oil turbulators * 100 percent brazed aluminum construction offer superior strength and reliability * Available in sizes to fit a wide range of applications from compact cars to Class "A" motorhomes * All cooler brackets come pre-drilled for easy mounting * All hardware necessary for installation * 100 percent pressure-tested at the factory ensuring quality and performance
( 11 )
$54.99
—
$72.99
Hayden Automotive offers fluid coolers in a variety of sizes and materials. These units help to extend the life of your vehicle by lowering operating temperatures. Coolers are available for many types of fluids, including transmission, hydraulic, and power steering; as well as engine coolant, diesel fluid, and engine and differential oil. Order the universal or vehicle-specific model needed for your application.
( 170 )
$23.99
—
$164.99
These Hayden Automotive fluid cooler mounting kits are designed for mounting a transmission cooler. They come available in either plastic or steel and include all necessary mounts and hardware.
( 7 )
$16.99
—
$21.99
The Ford F-150 is renowned for being incredibly capable. With up to 12,000 lbs. of towing capacity, it is certainly no slouch. But every powertrain has its limits. With a Mishimoto F-150 transmission fluid cooler, you'll be able to push those limits knowing that your transmission is protected. Mishimoto F-150 transmission fluid coolers are direct-fit units featuring tube-and fin construction that will add significant cooling potential with an increased core volume and greater fluid capacity. Heavy loads are no match for a Ford F-150 equipped with the maximum cooling and flow of a Mishimoto transmission cooler.
( 2 )
$452.95
Improved Racing oil cooler thermostats fit your cooling system with a compact, patent-pending design and function that are crucial to engine performance. These Flow Series Motorsport (FSM) oil thermostats ensure a low-pressure drop by placing the bypass valve mechanism completely out of the primary oil flow, while performing the critical function of bypassing the oil cooler until the oil has reached its minimum operating temperature. This removes the danger of over-cooling the oil and delaying engine warm-up, resulting in horsepower loss, excessive engine wear, and reduced gas mileage. These high-flow thermostats are crafted from aluminum, and then anodized for added durability and looks. They offer a lightweight universal solution to be used with any oil cooler on any vehicle or application.
( 3 )
$229.00
Heat has always been the number-one cause of premature automatic transmission failure. TCI Max-Cool transmission coolers are the most effective way to keep your transmission cool and extend its durability and performance. Available in multiple sizes, TCI Max-Cool transmission coolers utilize a special plate and fin design, which reduces transmission temperatures by 33 percent over tube-style transmission coolers.
( 2 )
$394.95
Enthusiasts who push their high performance cars to the limit understand the importance of keeping their oil temperatures low to prevent damage, or even seizure of the engine. Mishimoto oil cooler kits are designed to extend the life of your engine by ensuring that your essential high-wear engine components, such as piston rings, skirts, and cam bearings, are sufficiently lubricated with cooler oil. The kits include a durable aluminum oil cooler, stainless steel braided hose lines, fittings, and all necessary adapters. Models are also available to cool transmission oil/fluid. Order the universal or vehicle-specific cooler that's best suited for your application.
( 43 )
$238.95
—
$1,200.95
Pacific Performance Engineering offers automatic transmission fluid bypass valves for a variety of applications. The OEM part has restrictive internal passages; and when the OEM valve fails in the open position, transmission fluid doesn't reach your cooler. This can be caused by mechanical failure or debris. The result of stock valve failure can cause the transmission to dangerously overheat. Without properly cooled transmission fluid, the demands of towing and rigorous stop-and-go driving conditions shorten the life of transmission components. This PPE bypass valve eliminates the mechanical valve—which maximizes fluid flow from the transmission cooler. For further protection, a Neodymium magnet-equipped service plug has been added. The removable plug traps ferrous debris and can be accessed to remove particles from the system. The factory part does not have this feature. Additional notes: * Billet aluminum construction * Neodymium magnet-equipped service plug with O-ring * Easy to install * Limited lifetime warranty
( 18 )
$89.99
Long live your transmission! Heat is the enemy--but with PPE performance transmission coolers on the frontlines, high temperatures don't stand a chance of breaching their prey. Pacific Performance Engineering aluminum coolers feature 60 percent more surface area to lower your rig's fluid temperatures up to 30 degrees over stock. Plus, they're bolt-on replacements and they retain the use of your existing factory oil lines, so installation is pretty straightforward.
( 30 )
$350.99
CSF fluid coolers are part of a broad range that includes several designed, developed, and track proven in collaboration with BMW tuning specialists and parts manufacturers. Available coolers include: * Dual-pass, race-spec, DCT transmission coolers--a number are plug-and-play and include oil-line connections, mounting brackets, shrouds, and ducting * All-aluminum, controlled atmosphere brazed (CAB) dual-pass, plug-and-play, power steering coolers * Dual-pass, all-aluminum, race-spec engine oil coolers with cast end-tanks * Advanced and unique, dual-fluid, heavy-duty oil coolers with built-in fittings and included SPAL fan and sealed shroud. Additional features and benefits of CSF fluid coolers include: * Drop-in fit coolers require no modifications to install; They fit OE bumpers and accept factory oil-line connections, mounting brackets, shrouds, and ducts … even aftermarket splitters * Many feature dual-pass, high-performance cores that replace OEM single-pass designs for maximum surface area and flow * OE low-efficiency, mechanically bonded cores replaced with CAB-brazed, high-efficiency, turbulated, heavy-duty, bar and plate design cores for the most reliable and durable coolers available (on specific applications) * High-density, multi-louvered fin design with more surface area than OE units * Where applicable, fully TIG-welded end-tanks vs. OE mechanically jointed and tack-welded tanks for superior reliability and durability * Select applications include CSF's A/C condenser technology using super-high pressure, multi-channel micro-tubes * Lab tested to be more efficient than OEM coolers
( 2 )
$379.00
—
$699.00
Cover your oil cooler outlet with Summit Racing™ oil cooler block-off plates. Our covers are machined from billet aluminum and are clear anodized for added durability and looks. They are available with or without ports and include mounting hardware.
( 6 )
$25.99
Mishimoto thermal bypass valve kits improve upon the failings of stock models that can cause your transmission to overheat. Crafted from CNC-machined billet aluminum, the valves look better and perform better with a fully serviceable 160 degree F thermostat for fast warm-up in cold climates and a thermostat bypass for constant cooling in hot climates. They deliver increased flow over stock models and feature machined cooling fins for added heat dissipation and a durable anodized finish. These thermal bypass valve kits are backed by Mishimoto's Lifetime Warranty.
Not Yet Reviewed
$118.95
—
$233.95
Keep your transmission healthy with Four Seasons Ultra-Cool transmission oil coolers. The aluminum tube and fin oil coolers feed your system cool oil, protecting it from overheating and giving it the strength to climb, tow, and tackle stop-and-go city driving. Four Seasons transmission oil coolers offer your transmission efficient performance and protection. Be good to your transmission--give it a regular dose of cool oil from Four Seasons Ultra-Cool transmission oil coolers.
( 10 )
$36.99
With automatic transmissions, performance and longevity are reliant upon temperature. Reducing internal heat eliminates the chance of overheating fluids, which causes viscosity breakdown and transmission strain. Therefore, a cooler running transmission will last longer. Help protect your transmission on the street and at the strip with Stillen transmission cooler kits. Each kit includes all the necessary adapters, fittings, and hoses you will need for installation. Select the kit designed for your vehicle. Features: * Increases transmission fluid capacity * Helps prevent transmission fluid from overheating * Helps extend the life of your transmission * Bolt-on installation--instructions supplied
Not Yet Reviewed
$333.81
Body Parts transmission coolers keep fluid cool and your transmission running smoothly. They are built with quality materials and offer an OE fit and function. The life of your transmission is greatly affected by overheating. Lower temperatures with Body Parts transmission coolers.
Not Yet Reviewed
$63.99
—
$307.99
Fluidyne fluid coolers are at their best when the heat is on. They set the standard in performance, reliability, and durability—but what else would you expect from one of only two companies authorized by NASCAR to supply their "Spec Rad"? The coolers are available in a variety of sizes and configurations for universal, direct fit, and specialty applications. Depending on model, features include: * Most are available in single-pass or double-pass configurations * CAB-brazed construction (no epoxy) * Extruded oval tubes and patented lanced offset flow turbulators * Most efficient coolers pound-for-pound on the market
( 5 )
$499.00
Do you need to replace your oil cooler without breaking the bank? Hot oil will shorten the life of any engine component. Dorman engine oil coolers provide efficient cooling and are manufactured using quality materials to ensure years of trouble-free performance. These units are available in a variety of sizes and configurations for fitment on specific vehicle and engine applications.
( 11 )
$121.95
Hybrids need cooling, too. The drive motor inverter, the part that manages and recharges the circuits, contains numerous transformers and semiconductors that generate an enormous amount of heat. Adequate cooling and ventilation are vital to keep these components operational. If your inverter is overheating, CSF has what you need. CSF drive motor inverter coolers offer an OEM-style fit to seamlessly install into your cooling system without compromises or costly modifications. They are manufactured using high-quality materials and patented techniques to restore performance and fuel economy, which is the big benefit of owning a hybrid. Select the inverter cooler designed for your vehicle.
Not Yet Reviewed
$74.99
URO Parts fluid coolers are an important part of their extensive line of cooling system components that includes both engine oil and automatic transmission coolers. Available for a wide variety of European makes and models, URO Parts fluid coolers are carefully designed and precision-manufactured for high-efficiency, extra strength, and durability. They fit and perform just like OE fluid coolers, but without the exorbitant price tag.
Not Yet Reviewed
$44.99
—
$126.99
Mishimoto oil filter adapters are designed to allow you to install an aftermarket oil cooler on your engine. They are manufactured from quality materials and available in a variety of configurations and styles to fit the specific oil system you are working on.
( 6 )
$208.95
Clearance
Run your Tesla Model 3 or Model Y cooler and longer when you order Unplugged Performance Enduro drive unit oil cooler and magnetic filters as direct replacements for the factory oil filters. They increase cooling capacity by utilizing an efficient radial-finned design, combined with an approximately 10 percent higher capacity enclosure. The oil coolers further safeguard your vehicle's motor life by employing dual magnetic media debris catchers to extract metal shavings from the drive unit, along with the uprated 5-micron filter. As a result, your drive unit runs cooler and cleaner with less metal debris. Set new local lap records with an assist from Unplugged Performance Enduro drive unit oil coolers!
Not Yet Reviewed
$494.99
—
$794.99
$371.50
—
$596.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
