Availability
Summit Racing™ Performance LS7 hydraulic roller lifters are a definite upgrade over stock originals. Designed for high horsepower engines that demand increased oiling and higher-rpm capabilities, these replacement lifters will fit in SBC roller engines, as well as LS-based engines without active fuel management (AFM/DOD). Beat the competition to the finish line with Summit Racing™ Performance LS7 hydraulic lifters!
( 21 )
$287.99
Summit Racing™ Pro LS Truck Swap cams are affordable and give you maximum punch where the torque converter hits. The cam lobes are designed for excellent valvetrain longevity. Both drop-in or high-lift versions are available. They come in stages allowing you to quickly determine which gives you the idle and efficiency you are looking for. Idle response and the midrange torque from theses camshafts is unmatched. Starting with American bearing steel, they are precision machined on a Landis 3LB CNC grinder with CBN diamond wheels for an extremely good finish quality. The lobes have been designed for stability at high rpm with the spring pressures found in commonly available, quality spring packs.
( 93 )
$299.99
—
$319.99
Summit Racing™ Pro LS upgraded rocker arms feature high-quality rocker bodies that utilize the factory style pedestal mount. They are made of high-grade cast steel construction to ensure long-lasting durability and performance. This design replaces the factory bearing and powdered metal trunnion and utilizes a captive bearing design and a bearing steel trunnion. These rocker arms are a perfect upgrade for higher rate springs and performance camshafts. Summit Racing™ Pro LS upgraded rocker arms come preassembled with heavy-duty trunnion kits, which saves you time and the additional cost of an installation tool. Features include: • New body casting includes thicker webbing in critical areas for increased strength • Additional oiling provisions for the bearings • Heavy-duty clips or retainers • Durable captive bearing design and bearing steel trunnion
( 25 )
$326.99
Summit Racing™ Pro LS Automotive cams are affordable and designed in stages with very specific cam timing for each individual application in cathedral and rectangle port versions. This ensures maximum performance and gives you the idle you are looking for. The lobes are designed for stability at high rpm with the spring pressures found in quality .600 and .670 in. spring packs. Careful design guarantees the cams can be installed with minimal difficulty. Although piston to valve clearance should always be verified, the Stage 2 and 3 cams often allow for additional cylinder head milling. The Stage 4 cams often require no changes but can be degreed slightly different as needed. Starting with American bearing steel, they are precision machined on a Landis 3LB CNC grinder with CBN diamond wheels for unmatched quality.
( 24 )
$259.99
—
$349.99
Summit Racing™ offers cast exhaust manifolds in a wide range of configurations, materials, and finishes. The look great and deliver performance beyond your expectations. Whether you're looking for a quality replacement or to extract more horsepower from your engine, these exhaust manifolds are the answer. Order the model recommended for your year/make and engine application.
( 261 )
$291.99
—
$464.99
Summit Racing™ Pro LS Turbo cams are affordable and specifically designed to optimize cam timing with turbochargers. The lobes are stable up to 7,000-plus rpm with the exhaust lobes opening softly against high cylinder pressure for reduced stress on the valvetrain. Overlap has also been reduced in order to prevent reversion, which is typically seen with higher turbine inlet pressures. They come in distinct stages that give you the idle, spool, and power characteristics that match your engine and turbocharger. Starting with American bearing steel, they are precision machined on a Landis 3LB CNC grinder with CBN diamond wheels for unmatched quality. The lobes have been designed for stability at high rpm with the spring pressures found in commonly available quality spring packs.
( 8 )
$319.99
—
$349.99
Summit Racing™ Pro LS camshaft and spring kits are designed for GM LS engines. Each cam kit offers a budget-friendly option without sacrificing quality and performance. They're available in Stage 1 or 2 performance configurations. Stage 1 kits include the cam and matching drop in beehive springs with seals or optional upgraded dual spring and retainer kit. Stage 2 kits give you an additional cam change gasket kit and a crank bolt. Order the Summit Racing™ Pro LS camshaft kit recommended for your year/make and engine application.
( 37 )
$379.96
—
$477.94
Our Summit Racing Max EFI LS intake manifolds feature a curved edge design with a large 9.7-liter plenum, for maximum flow and horsepower. They are available in both tall and low-profile, and satin or black anodized finishes. They include gaskets, mounting hardware, and a billet fuel rail kit.
( 11 )
$499.99
Summit Racing™ Mockup Replica Blocks are light-weight and ship disassembled for ease of shipping and storage. The individual panels are easily assembled with tabs and slots for superior rigidity and accuracy compared to bolt-together types. Steel resists the heat from welding, so custom motor-mounts can be fabricated right on the block.
( 16 )
$296.99
—
$299.99
Summit Racing™ LS lifter and guide kits offer top-quality, precision-made pieces at an excellent value! These kits include a set of roller lifters, lifter guide bolts, and LS2 lifter guides.
( 41 )
$316.86
Summit Racing™ Extreme Duty cylinder head stud kits are engineered to withstand the stress and abuses that high-horsepower engines endure. These fastener kits come with all necessary studs, nuts, washers, lubricant, and instructions to ensure maximum performance and reliability. Order the hardware recommended for your year/make and engine application. Extreme Duty fasteners feature: * 190,000 psi tensile strength minimum * High-strength chromoly steel utilized for all products * Precision manufacturing processes ensure consistent product performance * All studs are twice straightened to guarantee straightness * Threads are rolled after heat treatment for high strength * Tensile and yield strength tested after thread rolling * Uniformly applied black oxide surface finish * Anti-rust oil coating to protect fasteners from corrosion
( 2 )
$266.99
—
$474.99
Finish the swap from fuel injection to a carburetor and distributor using a Summit Racing™ LS front drive distributor timing cover conversion kit. Our front cover and gear assemblies allow you to run your LS-style engine in classes that require a distributor ignition system, while relishing the simplicity and tuneability of a distributor and carburetor. Summit Racing™ LS Front Drive Distributor Timing Cover Conversion Kits: * Aluminum timing chain cover * Distributor drive gear assembly * Fuel pump eccentric * Color-coded spacers * Front cover crankshaft seal * Adjustable timing pointer * Necessary hardware
( 1 )
$448.99
Summit Racing™ Pro LS Race valve covers are designed for maximum effort applications. They are built tall to clear all types of rocker arm systems including adjustable shaft mounts. Made from cast aluminum for light weight and strength, they include -12 AN vent/ fill locations for catch can or vacuum pump plumbing and utilize built-in baffles to resist oil consumption through the vent or PCV. The valve covers are available in various colors and versions, with or without coil brackets. Select the Summit Racing™ Pro LS Race valve covers for your application needs. Features and benefits: * Available in black, red, or bare aluminum * Special profile clears shaft rockers * Oil fill cap and -12 AN plug included * Available plain and with coil mounts * Uses stock bolts and grommets (not included) * Uses stock gaskets (not included)
( 3 )
$269.99
Summit Racing™ Pro Hemi Non-MDS swap camshafts are made from high-quality bearing steel cores. They are precision ground and finished on modern CNC grinders to provide you with a premium replacement cam. Choose the model that fits your engine and make sure to use with Non-MDS lifters.
( 1 )
$349.99
Our Summit Racing™ Billet SFI-approved flexplates are built for racing. They're thicker than stock, double-welded with a forged one-piece ring gear. Summit Racing™ Billet SFI-approved flexplates are the superior choice for quality and precision.
( 4 )
$429.99
—
$434.99
Summit Racing™ Pro LS Single Plane cams are affordable and designed for racing applications where a carburetor and open exhaust are commonly found. These cams have slightly narrower lobe separation to increase torque and compliment short runner intakes. They come in distinct cam timing increments to give you maximum control over the power band. They're also designed with longevity in mind by taking stress off the valvetrain. These lobes remain stable to over 7,000 rpm with a common .600 and .670 lift dual spring kits.
( 21 )
$299.99
Summit Racing™ Pro LS T6 single and twin turbo cams have increased overlap from the standard turbo cams to take advantage of the better turbine housing flow. As a result, these cams will increase RPM and work with larger cubic inches better in race applications where an open front exit exhaust is utilized.
Not Yet Reviewed
$349.99
Summit Racing™ Pro LS wrist pins are the toughest on the market—powerfully built for extreme boost and nitrous. They're specifically developed for Summit Racing™ Pro LS pistons and others that use a 2.250 in. pin length for Spiralocks to clear the reluctor ring without notching. Make no mistake, during high-contact stress and impact loading applications, you'll want the confidence that Summit Racing™ Pro LS wrist pins provide! * Part number SUM-S719 is made from H-13 tool steel, an alloy with 289,000 psi tensile strength (vs. common 9310 alloy tool steel pins at 187,000 psi) * Part number SUM-S720 adds diamond-like coating (DLC) to the H-13 tool steel for increased durability, hardness and much lower friction * The DLC wrist pins (SUM-S720) provide better lubricity for use with low-silicon 2618 alloy pistons that may have pin-bore galling issues at the extremes without DLC * H-13 tempers at 1,000 degrees F and readily accepts DLC application (at 400 F) without structural changes * Rockwell hardness: 54 HRC * Increased ductility of 30,500 ksi compared to other materials * Surface-finished to an RA of less than 1 and a concentricity of .000040 in. * 0.215 in. wall-thickness—the thickest on the market for ultimate strength * Only 135 grams * I.D. honed to remove stress-risers
( 4 )
$255.99
Summit Racing™ Tri-Fold tonneau covers allow you full truck bed and cargo coverage when you need it, and fold back to provide open bed space when hauling larger loads. These tonneau covers are made with heavy-duty, tear-resistant vinyl and come fully assembled to offer easy installation, no special tools required. Additional features of Summit Racing™ Tri-Fold tonneau covers include: * Constructed of industrial-grade vinyl * Durable black powdercoated aluminum frame * Weather-resistant EPDM rubber seals * Simple-to-use clamps with large wing nuts for easy installation; just line up the tonneau cover, fasten the quick-clamps, and you're ready to roll in minutes
( 19 )
$258.99
—
$259.99
Mopar and Hemi mean a lot to car guys--they embody power and classic design. Summit Racing™ Mopar Hemi coil-on-plug ignition coils are a great way to match well-engineered engines with the pure power of plasma. We use pure copper wire, rare earth magnets, and a custom primary and secondary wind to provide 20 percent more voltage and 30 percent more spark energy (mj) over stock. All this comes from a stock-sized coil housing. They fit in the stock location, making changing these coils as easy as possible. If you are running a supercharger, turbocharger, nitrous, or are burning E85, you need the hottest and strongest spark possible to burn your fuel. With the increased voltage and energy output values, your cylinders will get the spark they need to maximize fuel burn!
( 15 )
$479.92
Add that classic rally wheel look to your ride with our Summit Racing™ AlumaRally wheels. Unlike your old steel rally wheels, these are made of a high-quality, one piece aluminum construction and are available in 15"-20" diameters.
( 8 )
$250.99
—
$324.99
Summit rear window louvers will give you a dose of the late '60s/early '70s flavor, plus privacy and sun protection. Choose from black-painted aluminum, UV-resistant textured black ABS plastic, and ready-to-paint smooth ABS plastic (depending on the application). Whichever you choose, they install quickly using steel mounting plates with pre-applied adhesive, which allows you to remove the louvers to clean the window.
( 203 )
$342.99
—
$498.99
On Sale
A properly fabricated intake manifold can produce significant gains in your engine's performance. Add one of our Summit Racing™ fabricated intake manifolds to your engine combination to make more power! Each of these stock/OEM deck engine block style intake manifolds is manufactured to exacting standards utilizing the latest CNC machining and fabricating equipment. Simply find and order a perfect fit for your specific make and model vehicle.
( 29 )
$429.99
$329.99
—
$429.99
Clearance
Summit Racing™ Pro Hemi automotive camshafts are easy on the valvetrain and stable at high rpms. They work well with superchargers and nitrous, and will require springs, a tune, phaser limiter, and an MDS (multi-displacement system) delete. The smaller cams in this group have a noticeable lope and good power across the range, while the larger cams have a serious lope with strong top-end. Choose the one that best fits your purpose. Notes: * Pro Hemi automotive Stage 1 has a noticeable lope and works great in 5.7L as a daily driver. It makes good power through the range, and a tune and phaser limiter are required. A free flowing aftermarket exhaust is recommended. * Pro Hemi automotive Stage 2 has a mild lope and works great in a daily driver. It makes good power through the range, and a tune and phaser limiter are required. A free flowing aftermarket exhaust is recommended. * Pro Hemi automotive Stage 3 has a steady lope and is about the biggest cam to used in a daily driver. It makes great midrange and has good top end. It works with a factory converter, but a tune and phaser limiter are required, and free flowing aftermarket exhaust is recommended. * Pro Hemi automotive Stage 4 has a strong lope and works good in weekend hot rods. It makes great midrange and has very good top end. It is the biggest cam we recommend with a factory converter, and a tune and phaser limiter is required. A free flowing aftermarket exhaust is also recommended. * Pro Hemi automotive Stage 5 (or Stage 4 supercharged) camshafts provide a serious lope, great power in the mid-range, and a strong top-end. These cams require a tune, phaser limiter, an MDS (multi-displacement system) delete, and valve springs capable of .625 lift. We recommend a free flowing aftermarket exhaust and a 2800-3000 converter. Careful attention to piston-to-valve clearance is required. Fly cutting is generally not necessary. * Pro Hemi automotive Stage 6 (or Stage 5 supercharged) camshafts achieve the top stages in each of these groups, providing a serious lope, great power in the mid-range, and a strong top-end. Each of these special cams require a tune, a phaser limiter, an MDS (multi-displacement system) delete, and valve springs capable of .625 lift. We recommend a free flowing aftermarket exhaust and a 3000-3200 converter. Careful attention to piston-to-valve clearance is required. Fly cutting is generally not necessary.
( 2 )
$349.99
$299.50
—
$349.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
