Availability
Give your roller lifters the proper orientation with Summit Racing™ lifter guides. Hydraulic roller lifters cannot be allowed to rotate, and our sturdy lifter guides will keep your lifters properly positioned to prevent rotation. They're available in a variety of styles for applications from the 1980s and up. Trust Summit Racing™ lifter guides to keep your lifters captive!
( 40 )
$36.99
Summit Racing™ offers cylinder head bolt kits that will keep consistent clamping force on your heads and not your wallet! Our kits contain strong, high-quality steel bolts with either a black oxide or zinc plated finish for added durability. Some kits also include washers. Stay on budget--let Summit Racing™ help complete your cylinder head installation with our selection of cylinder head bolt kits.
( 85 )
$44.99
These Summit Racing™ connecting rod bearings are just what you need to freshen up your engine. Why? They use silicon aluminum bi-metal construction. Silicon aluminum is the choice for many of today's engine manufacturers because of its high fatigue strength and superior temperature threshold. Bearing wear is dramatically reduced and the fatigue strength is greatly improved.
( 119 )
$23.99
Keep your performance engine sealed properly with Summit Racing™ oil pan gaskets. Built from high-quality materials, these gaskets will maintain a leak-free seal for your oil pan.
( 116 )
$25.99
Summit Racing™ MDS solenoid plugs are designed to plug the hole where the old MDS solenoids used to live. Commonly used when swapping MDS engines into older non-MDS cars or retro fitting non-MDS cams.
( 4 )
$40.99
Summit Racing offers replacement thermostats for thousands of vehicles. They're offered in a variety of styles, materials, flow rates, temperature ratings, and more. A reliable thermostat is essential to your cooling system and overall performance—kicking in precisely when your engine needs it. Order the model best suited for your application.
( 361 )
$23.99
—
$37.99
Summit Racing™ timing cover gasket kits provide a tight seal to keep contaminants out of the gear shaft area. They're offered for OE-style fitment on a wide variety of cars, trucks, vans, and SUVs. Choose the kit which corresponds to your year/make and engine application.
( 30 )
$40.99
With Summit Racing™ branded, all-100 percent silicone 8mm constructed wire, a 300 ohm per foot wire-wound EMI suppression core, high-heat silicone boots, and stainless steel and brass terminals, you get all the high-end features a wire set can offer, without breaking the bank! * Dual silicone high tear-resistant jacketing with fiberglass matting gives you the highest heat protection and superior terminal pull-off values in the business * Our 300 ohm per foot wire-wound magnetic suppression core maximizes the voltage output of your ignition system, while maintaining high EMI resistance values * Stainless steel terminals with posi-lock hardened clips and brass terminals are used for superior connection and consistent voltage delivery * Ultra-high heat silicone spark plug boots provide superior radiant heat protection -- High dielectric strength properties virtually eliminate voltage leakage and blow through Installing our Summit Racing™ high-end 8mm sets will give you the confidence, reliability, and performance you expect from Summit Racing™ products.
( 1018 )
$49.99
Summit Racing™ Coolant Steam Port crossover kits deliver cool performance and looks. Featuring beautiful billet aluminum construction, our kits will bypass the hot engine coolant from your throttle body for better performance and vent the steam from the front of the cylinder heads to the radiator or balance the flow between the rear of heads to help reduce engine temperature. Keep your engine happy and running at an optimal level with Summit Racing™ Coolant Steam Port Crossover Kits.
( 13 )
$39.99
—
$48.99
Summit Racing™ LS oil galley barbell plug kits give you a cool, affordable way to improve your LS engine's oiling system. They include the rear "barbell" or "dogbone" which has a smaller stem diameter than the factory plastic unit to improve flow to the filter, a solid plug to delete the filter bypass in the oil pan, and a step washer and bolt to support the unsupported side of the oil pump pickup tube retainer.
( 6 )
$24.99
Summit Racing™ flywheel holding tools stop your engine from rotating while you work. Simply bolt the tool in place and it securely locks the engine so you can begin removing or installing flywheels, clutches, flex plates, harmonic dampers, and harmonic damper bolts. Summit Racing™ flywheel holding tools are designed to work with the engine in the vehicle or on a stand.
( 9 )
$46.99
The timing cover and rear cover on GM LS Series engines don't have dowel pins to ensure correct alignment to the center line of the crankshaft. This often leads to annoying leaks at the front damper seal and rear main seal. Summit™ has the solution to leak-free LS engine builds. Summit Racing™ Pro LS cover alignment tools locate or center the seal openings on the front or rear cover when it's installed, ensuring the seal is centered on the crankshaft, preventing leaks and allowing easier installation of the seals.
( 13 )
$45.99
Summit Racing™ LS swap motor mount kits will make transplanting your Gen III/IV LS easier and more secure. These kits will provide the support needed, as well as confidence in knowing their fit and function will make your project a success.
( 15 )
$38.99
Our classy Summit Racing™ engine oil dipsticks and tubes will dress up any engine compartment, including yours. They are made from quality steel, with durable Chrome or Black Powdercoated finish for good corrosion protection and long life. Get yours today.
( 188 )
$41.99
—
$44.99
Summit Racing™ coolant crossover delete kits allow you to block off the rear coolant crossover or steam passages on your LS cylinder heads. The low-profile design gives extra clearance and does not require removal of the block-off when removing the cylinder head bolts. These delete kits include two billet aluminum plugs, O-rings, and bolts. Order the kit recommended for your year/make and engine application.
( 3 )
$20.99
Summit Racing™ aluminum water necks swivel 360 degrees to give you various radiator hose routing options. They come with bolts and a highly polished or anodized aluminum finish for a sharp appearance.
( 210 )
$32.99
—
$42.99
Summit Racing™ truck shocks are designed specifically to give your truck a factory-quality ride, both on and off-road. The twin-tube, hydraulic-action shocks feature multi-stage valving and are available for front or rear positions. They're offered in a variety of extended and collapsed lengths for stock-height and lifted applications. All truck shocks come standard with red polyurethane bushings and boots.
( 122 )
$36.99
Summit Racing offers exhaust flanges in a variety of 2- and 3-bolt pattern sizes and shapes. The 3/8 in. thick flanges are available in steel or stainless steel—and are designed to ensure an accurate, leak-proof seal for your exhaust components. Order the model that fits your pipe diameter and other fitment specs.
( 94 )
$29.99
Summit Racing™ MAP sensor adapters enable you to use a Holley LS2 harness with LS3 engines. These adapters feature pre-terminated connectors and wiring for a direct plug-and-play installation.
( 4 )
$28.99
Cover your oil cooler outlet with Summit Racing™ oil cooler block-off plates. Our covers are machined from billet aluminum and are clear anodized for added durability and looks. They are available with or without ports and include mounting hardware.
( 6 )
$24.99
—
$26.99
Summit Racing™ LS Crankshaft Pilot Extensions are an adapter bushing that extends the end of the crankshaft pilot allowing you to use an older-style GM automatic transmission on your LS1 engine. Summit Racing™ LS crankshaft pilot extensions have steel construction and tapered fit to provide long wear and an uncomplicated installation.
( 6 )
$29.99
Looking for some quality header bolts from a name you can trust? Our stainless steel Summit Racing™ header bolts have small 3/8 in. hex heads for use with a box end wrench. A 9/16 in. head flange eliminates the need for washers.
( 40 )
$27.99
—
$29.99
These Summit Racing™ Manufacturing and Engineering LS rocker arm bolts have been specifically designed for use with your GM LS1/LS6 engines. They feature a small 8 mm hex head with a flange and are manufactured from high-strength, SAE-rated steel. The bolts also have a black oxide finish applied for corrosion protection.
( 14 )
$38.99
Rebuilding your GM LS engine? Replace those old main cap bolts with our Summit Racing™ LS main cap bolt kits for peace of mind. Our kit includes all 30 bolts to get the job done. They meet the same high-quality and specifications as your factory bolts.
( 16 )
$41.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
