Availability
Showing In Stock Items. Show All 56 Items.
Aeromotive VaporWorx Ally KPM1500 returnless PWM (pulse width modulation) system kits include a KPM1500 fuel pump modified with a high-pressure regulator, returnless Ally PWM control system, and other modifications to make them work properly for FSCM-equipped vehicles and aftermarket ECM/FSCM (fuel system control module) systems. The KPM1500 features twin Bosch PWM compatible OEM pumps, fully re-engineered pump support system, robust venturi pump systems, integral safety overpressure valves, and a built-in anti-reversion/check valve, making each fuel pump very much like an OEM part. The outlet nipple has been strengthened to reduce the chances of breakage, and their operation is smooth, quiet, and easy to control. The weakness of the OEM FSCM is power capability. They can drive one high-power pump, but not two. That's where the VaporWorx Ally PWM (pulse width modulation) kit comes in. It contains everything needed to drive the second KPM1500 electrically while the OEM fuel system control module handles the primary, keeping the power separated, but control of both pumps is handled by the FSCM, and all feedback, diagnostics, fuel pressure, etc. remains functional. These kits are intended to be used as an Ally, or piggyback, system to help the OEM FSCM. No additional relays, Hobb's switches, etc. are needed. Features: * VaporWorx modified KPM1500 fuel pump module make the OEM chassis wiring plug-and-play * Using PWM to slow down the pumps is very effective in keeping fuel temperatures down and relieving the electrical system of excessive load * Ally PWM controller is a unique control strategy that helps reduce the amount of power that the FSCM produces at higher fuel demand * At higher duty cycles the Ally PWM controller will start to out-run the FSCM and take more of the pumping power load, "helping out" the fuel system control module * Approximately 71 percent+ reduction in power to the fuel pump during idle/cruise vs. running both pumps full speed all the time. Practically eliminates vapor lock/cavitation caused by overheated fuel * Fully returnless (external inline filter required) * 60-amp minimum continuous power rating in a compact controller package * Total size 4 in. L x 2.1 in. W x 1 5/8 in. H * Over-temperature shutdown with automatic reset operates indefinitely without damage * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies (where appropriate) * All cross-linked polyethylene wiring * UL94 rated components used throughout
Not Yet Reviewed
$2,917.70
Mount an offensive to regain optimum acoustics with Borla ATAK cat-back systems. Your modern muscle car will not only be performance-enhanced, but also acoustically tuned to a loud, aggressive exhaust note. ATAK (acoustically tuned applied kinetics) technology produces the highest dB levels, avoiding distortion to retain clarity. Tuned like a graphic equalizer, these cat-back systems are custom-tuned for your specific vehicle, delivering the most desirable sound to your ears. Plus, you retain all of the power-adding capabilities of Borla's multi-core design. The exhausts are handmade by master craftsmen from premium 300-Series austenitic stainless steel and ultra-smooth, mandrel-bent piping.
( 540 )
$2,157.99
—
$3,553.99
Stainless Works long tube headers are constructed from CNC mandrel-bent tubing with laser-cut flanges. These high-flow headers are made for your specific application, ensuring a perfect fit and excellent performance.
( 6 )
$3,035.25
Installed behind the rear axle, Borla ATAK axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s). Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (rear section) performance exhausts are less restrictive than factory exhaust systems. Welded tips are standard on most systems. ATAK (Acoustically Tuned Applied Kinetics) technology is designed for high-performance purists who prefer exhaust sound over their stereos. ATAK-equipped exhaust systems deliver the highest available dB (decibel) levels in the Borla street-legal lineup. Unlike inferior brands that lose significant sound quality at higher volumes, ATAK systems are tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output. They are calibrated on a vehicle-by-vehicle basis and their specifically-tuned internal muffler cores deliver the most desirable sound. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla ATAK axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla ATAK axle-back exhaust systems with the power of race-winning Borla Multicore technology.
( 157 )
$2,031.99
—
$2,333.99
Aeromotive VaporWorx KPM1500 fuel pump/returnless PWM control systems include a KPM1500 fuel pump modified with a high-pressure regulator, returnless pulse width modulation control system, and other modifications to make them work properly for most US-based vehicles. The KPM1500 features twin OEM Bosch PWM compatible pumps, fully re-engineered pump support system, robust venturi pump systems, integral safety overpressure valves, and a built-in anti-reversion/check valve, making each fuel pump very much like an OEM part. The outlet nipple has been strengthened to reduce the chances of breakage, and their operation is smooth, quiet, and easy to control. VaporWorx PWM (pulse width modulation) kit contains everything needed to drive the KPM1500 electrically in either constant/static or manifold referenced pressure modes. These kits are intended to be used as standalone control systems. No additional relays, Hobb's switches, etc. are needed. Features: * VaporWorx modified KPM1500 fuel pump module make the OEM chassis wiring plug-and-play * Approximately 71 percent+ reduction in power to the fuel pump during idle/cruise vs. running both pumps full speed all the time. Practically eliminates vapor lock/cavitation caused by overheated fuel * Fully returnless (external inline filter required) * 60-amp minimum continuous power rating in a compact controller package * Total size 4 in. L x 2.1 in. W x 1 5/8 in. H * Over-temperature shutdown with automatic reset operates indefinitely without damage * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies (where appropriate)
Not Yet Reviewed
$2,917.70
Kooks Headers long tube headers are heavy-duty and crack-resistant, featuring large diameter stainless steel construction (most applications) with smooth-flowing mandrel-bent tubing. They include gaskets, bolts, and oxygen sensor extensions where required. Also available as kits with connection pipes, depending on the application, Kooks long tube header kits include individual connection pipes, a Y-pipe, X-pipe, or H-pipe to connect to the exhaust system. X-pipes are used primarily for high-rpm performance and race applications. H-pipes create lower end power and are used on street cars for increased performance with a comfortable sound level. These connection pipes are offered in three versions: * Off-road (non-catted) for full track use with no horsepower loss and the loudest exhaust tone * With high-flow catalytic converters; recommended for street driving with little or no horsepower loss and a deeper exhaust tone * With Kooks ultra-high performance GREENCATS catalytic converters; designed for naturally aspirated and forced induction engines up to 900 hp, eliminates most "Check Engine Light" warnings Note: Kooks Headers long tube headers and connection pipes may not be legal for sale, installation, or use in some areas. Check your state and local laws.
( 40 )
$2,300.04
—
$2,930.04
Borla S-type cat-back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower and produce a more aggressive sound and higher flow. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive Borla Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium 300-Series austenitic stainless steel, superior to T-400 Series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. It's just what you'd expect from the world's most experienced (and most winning) exhaust brand.
( 933 )
$2,739.99
—
$3,445.99
Nitrous Express LT4 Supercharger lid nitrous systems replace your factory supercharger lid on GM LT4 Superchargers for a quick and clean install. The lids feature an improved airflow design that can increase up to 25 hp by itself, and increase power even more when your system is activated. Nitrous Express LT4 Supercharger lid systems are available as nitrous and nitrous/water methanol systems, with or without bottles. The nitrous spray bar system injects nitrous and fuel above each intake port, providing direct port-like distribution and ensuring maximum performance. Nitrous systems include: * Billet aluminum and carbon fiber lightning solenoids * Industry exclusive billet aluminum Lightning 500 bottle valve * Stainless steel braided lines * Stainless steel bottle brackets * Wiring, switches, and jetting for 100 to 300 wph Nitrous and water/methanol systems will also include: * Billet aluminum and carbon fiber lightning water/methanol solenoids * High-pressure electric pump * Stainless braided soft lines * Pre-bent stainless steel hard lines * Filtered nozzles * Plated fittings * Composite reservoir * Switches * NX Stage 2 digital progressive methanol controller
Not Yet Reviewed
$2,830.14
—
$5,496.70
Borla S-Type axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin. S-Type axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. Improvements in sound and performance are accomplished by using superior muffler designs, mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type axle-back exhaust systems.
( 246 )
$2,011.99
—
$2,260.99
On Sale
Customize your car style and ride, with Koni GTS coilover suspension. With a history developed in Formula 1 racing, Koni knows how to maximize the control of your suspension setup. Koni GTS coilover suspension kits combine world-class Koni Sport adjustable valving, linear lowering springs, ride height adjustable perches, and threaded bodies--a full kit ready to install on your car. Made for both on road driving and weekend track days, the GTS coilover range offers the user a fully customizable suspension package, ride height adjustable and valving adjustable, allowing a wide range of suspension setups. Look stylish with maximum suspension practicality; select the Koni GTS coilover kit designed for your vehicle.
Not Yet Reviewed
$2,198.67
$2,066.75
Trackspec Trackday Series bolt-in roll bars are available for a wide range of cars, such as Corvettes, Camaros, and Firebirds. Over the past few years, Trackspec has become the leader in roll cage installations and design. As part of the SPEC Corvette racing series, they were driven to develop the best solutions on the market for rollover safety, starting with their DIY Roll Cage kits. For those not looking for a full roll cage, Trackspec developed the best bolt-in 4-point roll bar on the market for the 1982-92 3rd generation Camaro. Many roll bars on the market mount to the floor, which can be a less-than-ideal mounting solution. The Trackspec solution resolves all of this by mounting the main hoop to a vertically supported shelf near the rear seat buckets. They accomplished this by using advanced technologies to develop a billet machine aluminum plate that distributes the load of the main hoop evenly and across a larger surface area. By doing so, Trackspec achieved a stronger mounting solution and ease of installation. The rear down tubes also mount to a supported portion of the unibody structure. Further, the vertical portion of the rear wheel tubs is tied in to increase mounting strength. Order the roll bars recommended for your vehicle. Additional product details: * Industry-leading main hoop mounting solution using oversized billet machined plates to distribute loads on a vertically supported part of the unibody * Rear kicker bars attach to supported portion of the unibody for a strong and secure mount * Rear bars are detachable using TIG-welded couplers for ease of installation and shipping * Driver and passenger seats maintains full articulation * Meets and exceeds NASA and SCCA time trial 4-point bolt-in requirements * Installs easily with simple hand tools in 2-3 hours * Comes fully powdercoated in standard colors * Retains all plastics and rear seat bottoms * Upper rear seat must be removed * Can be unbolted in minutes if needed * All bars are tucked as high and as tight as possible * Made of 1.75 in. .095 in. mild steel DOM * Includes all mounting hardware
( 1 )
$2,199.99
MagnaFlow Competition Series exhaust systems are designed for those seeking maximum performance, reduced mass, and an aggressive exhaust note that demands attention. They feature all mandrel-bent tubing and 409 stainless steel construction. These kits are available in numerous configurations, including cat-back and rear axle-back styles; single or dual mufflers; and one, two, or four outlets. Many tip options are offered, as well. MagnaFlow Competition Series exhausts increase your horsepower and torque for better results on the track, and they carry a lifetime construction warranty. (The systems may not comply with all local or federal noise requirements.) Order the sizes and setup tailored for fitment on your specific make and model.
( 28 )
$2,195.00
—
$3,210.00
aFe Mach Force XP exhaust systems are constructed of mandrel-bent stainless steel and come complete with free-flowing muffler(s), OE-style bayonet hangers, flanges, and band clamps, plus all hardware necessary for a hassle-free installation. Offered in single, dual, or quad muffler configurations, their smooth curves and large diameter tubes help reduce restriction and keep exhaust gas flowing smoothly for increased horsepower and torque. Available in cat-back, axle-back, and downpipe-back designs, almost all Mach Force XP exhausts are direct bolt-on systems that require no cutting or drilling and include all necessary hardware for a hassle-free installation. Most also include wrinkle-black powdercoated or polished 304 stainless steel tip(s) with a laser-cut stainless steel aFe power badge. Select models have carbon fiber tips with CNC-machined laser-etched inserts. aFe Mach Force XP exhaust systems are an ideal combination of performance, fit, and value. Additional features include: * Fit a variety of light trucks and cars, including European models * Available with 409 or 304 stainless tubing (varies by model) * "Stepped design" models increase exhaust velocity creating a broader torque curve throughout the rpm range * Straight-through, free-flowing stainless steel mufflers absorb high-pitch tones producing powerful sound * Leak-free 360-degree sealing * Stable pipe location in high-vibration and high-heat conditions * Bayonet tips hold hanger bushings in place for an OE-style fit * Several versions convert OE single exhaust to dual exhausts * Where applicable, incorporates an exhaust valve that uses the OE exhaust valve motor (not included) to regulate exhaust flow * Some systems use a unique resonance chamber to replace the OE muffler; produces a weight savings of up to 15 lbs. * Hi-Tuck design of specific models provide extra ground clearance when using an aftermarket suspension kit Note: Some aFe Mach Force XP systems are "Race Only" products solely for competition use. Their use is limited to closed-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state, and federal laws.
( 36 )
$2,098.95
—
$2,936.85
Gain powerful sound, better performance, and improved mileage with a set of Stainless Works performance headers. Constructed from high-quality 304L stainless steel, the headers are CNC mandrel-bent and have durable 3/8 in. thick flanges. They're available to fit the factory connection point, or attach to a custom Stainless Works cat-back exhaust. Order the style you prefer and the model designed for your year/make and engine application.
( 30 )
$2,256.25
On Sale
Alcon offers Pro-System brake kits for a wide range of vehicles, including many Chevrolet Corvettes and Camaros, BMW M3's, and Volkswagen Golf models from the late 1990s and up. These replacements are manufactured from factory-style materials and specifications to ensure proper fit and long-lasting performance. Depending on the front and/or rear kit you select, components may include a vented rotor with slotted surface, aluminum caliper, and semi-metallic brake pads. The brake parts are available in a variety of diameters, thicknesses, and bolt patterns. Order the kit(s) recommended for your application.
Not Yet Reviewed
$4,000.00
Stainless Works Redline Factory Connect exhaust systems with X-pipes deliver improved sound and performance for your new muscle car. SW has engineered drone-free aggressive mufflers tuned specifically for your ride's V8 engine. The systems are built from corrosion-resistant 304 stainless steel and TIG-welded in their state-of-the-art facility. Stainless Works Redline Factory Connect exhaust systems with X-pipes are available for systems with or without active exhaust valves. Their in-house engineered valve bolts directly to the factory electronics to allow for all exhaust modes, from the closed valve "quiet" mode, to the chambered "normal" mode, and to the wide open straight-through design on "track" mode. Stainless Works Redline X-pipe systems feature: * Redline System—their most aggressive sound * Factory Connect--necks down at factory connection point * 3 in. mandrel-bent tubing offers improved flow over stock exhaust * X-pipe crossover * Tuned mufflers for aggressive muscle car sound * Quad polished or matte black tips * Slash-cut double-wall style * Excellent fitment for easy installation * 304 stainless steel * TIG-welded for beauty and strength * Lifetime warranty on materials and craftsmanship
( 2 )
$2,124.20
—
$2,546.00
Stainless Works Legend Factory Connect exhaust systems with X-pipes will improve the sound and performance on your ride. Stainless Works has engineered a drone-free aggressive muffler tuned specifically for your car's V8 engine. In addition to the tuned mufflers, they've also utilized 3 in. tubing in their X-pipe crossover for an improvement in flow over the stock exhaust. Finishing the system, Stainless Works employs polished or matte black quad tips with a double-wall beveled style. Stainless Works Legend systems are built from corrosion-resistant 304 stainless steel and are TIG-welded in their state-of-the-art facility. Features and benefits include: * Legend System is designed for the daily driver * Factory Connect—necks down at factory connection point * 3 in. mandrel-bent tubing * Tuned mufflers for aggressive muscle car sound * Slash-cut double-wall style * Excellent fitment for easy installation * 304 stainless steel * TIG-welded for beauty and strength * Lifetime warranty on materials and craftsmanship
Not Yet Reviewed
$2,546.00
Variant 3 coilover kits from KW Suspensions feature state-of-the-art technology to customize your ride's stance and look sharp. These coilover systems are designed with shorter INOX-Line stainless steel strut housings for more spring travel, anodized aluminum spring collars for durability, and high-tensile racing springs for strong support and comfort. Their separate and independent compression and rebound damping options allow for a truly individual driving setup. Order the kit recommended for your vehicle.
Not Yet Reviewed
$3,584.00
Centerforce TRIAD DS clutch kits have been developed for vehicles requiring a holding capacity of 500 to 1,100 lbs.-ft. of torque at the crank. These patented Drive System (DS) multi-disc clutches are smaller and lighter, offering many features and advantages for quick-revving vehicles, and include pressure plate, discs, floaters, flywheel, pilot bearing, bolts, and tool. The billet pressure plate features Centerforce's patented centrifugal weight system (where applicable) for superior clamp load over stock and their patented ball bearing actuated pressure plate (where applicable) provides light pedal effort. The solid hub (possible gear noise) disc pack is equipped with Kevlar® full-facing friction material providing increased holding capacity. TRIAD DS clutches are equipped with a lightened billet steel flywheel providing low inertia resulting in quicker rpms. Centerforce TRIAD DS clutches are match balanced and ready for installation using the included ARP fasteners. Choose the kit designed for your vehicle.
Not Yet Reviewed
$2,288.95
Centerforce TRIAD XDS clutch kits supply triple disc clutches developed for vehicles requiring a holding capacity of 500 to 1,200 ft.-lbs. of torque at the crank. For superior clamp load the billet pressure plates feature their patented centrifugal weight system (where applicable), while the patented ball bearing-actuated pressure plate (where applicable) provides light pedal effort. TRIAD XDS disc packs are equipped with metallic friction material for increased holding capacity and they are available in either sprung or solid hub styles, depending on application. The clutches are equipped with lightened billet steel flywheels providing low inertia, resulting in quicker rpms. Centerforce TRIAD XDS clutch kits may feature: * No complicated setup or adjustments * 8.75 in. diameter designed to lower inertia for heavy track use * Centrifugally assisted diaphragm to increase holding capacity with rpm * Solid hub design offers light weight and quick shifts * Patented multi-disc floating disc and drive disc designs * Holds 500 to 1,200 ft.-lbs. of torque at the flywheel * Patented ball bearing pressure plate * Specification card * Excellent driver control * Positive drive floater * Precision-balanced * ARP fasteners
Not Yet Reviewed
$2,309.95
Snow Performance Boost Cooler Stage-2 progressive water/methanol injection systems can unlock 50 to 70+ hp on your boosted vehicle, while decreasing your air temperatures by up to 100 degrees. You can increase your pump gas octane by 25 points and make more power, more efficiently, with a cooler running engine. These kits are compatible with all forced induction applications and feature a progressive controller with built-in MAP sensor that proportionally injects more or less water/methanol according to boost pressure. The controllers have adjustable start and stop points for engagement and delivery curves to match what the engine requires.
( 2 )
$3,398.40
Mantic Clutch USA offers 9000 Series triple-disc clutch and flywheel kits for a wide range of vehicles—including muscle and sports cars like Corvette, Camaro, Mustang, Challenger, Viper, and more. These ultimate combos include everything needed to replace your worn-out clutch, including a matched lightweight flywheel. They're perfect for any supercharger, nitrous, N/A or turbo car that needs a durable rebuildable clutch. If a single or twin disc won't handle the power, Mantic triple disc is the big boy upgrade for big power cars. Order the kit recommended for your vehicle. Product features: * SFI-approved 1.1 * All-billet construction * No flex at high-RPM * Light pedal feel * High torque capacity * All-in-one complete kit * Lightened aluminum flywheel * Completely rebuildable * 1515 torque capacity at crank * 1250-1285 torque capacity at wheels * NOTE: Capacity will vary with use and type of power-adder being utilized Complete kits include: * Lightened aluminum flywheel (12 lbs.) * Triple disc clutches * Billet intermediate plates * Ceremetalic friction material * New OE hydraulic release bearing * New flywheel and clutch bolts * Install hardware * Aluminum carrying case * Detailed instructions
Not Yet Reviewed
$3,268.00
You'd be crazy to throw water into a gas tank and expect to get anywhere—but power and torque can be increased if you inject it into the incoming air charge with Nitrous Express water/methanol injection systems. Cooling the air charge allows for increased timing and the resulting performance benefits. These versatile units have a wide-open throttle switch for naturally aspirated vehicles and an adjustable boost-activated switch for forced induction models. Nitrous Express systems inject a fixed amount of fluid when the WOT switch or boost is activated—and continues until the switch opens again. They reduce intake temperatures and the need for timing retard when used with nitrous. Stage II kits come complete with a high-output pump, 3 qt. reservoir, nozzle, boost activated progressive controller, switch, hardware, and detailed instructions. Water has always been used to cool down motors, but with Nitrous Express water/methanol injection systems … it'll be heating things up!
Not Yet Reviewed
$3,398.40
Stock clutches are made for stock horsepower. Mantic Clutch USA 9000 Series twin disc clutch kits are direct replacement upgrades that can handle 1,010 lb.-ft. of torque capacity at the crank and roughly up to 820 to 850 lb.-ft. at the wheels (capacity will vary with use and type of power adder being utilized). Engineered for serious performance builds, Mantic 9000 clutch kits are the proven answer to transfer all power to the ground and driving your vehicle with a Mantic Twin is easy, pedal effort remains relatively low, with approximately 12 to 15 percent increase over the OE clutch pedal feel. Available for many applications, Mantic Clutch 9000 Series twin disc clutch kits with their ceremetallic friction material and all billet construction make them the best for severe duty yet street friendly. Features and benefits: * SFI approved 1.1 * All billet construction * No Flex at high rpms * High-torque capacity * Lightened flywheel revs quicker compared to heavier OE flywheels * Completely rebuildable—modular construction makes service easy * 9 in. twin disc clutches reduce Moment of Inertia (MOI) for quicker more precise shifts * Ceremetalic friction material offers more heat resistance * OE hydraulic release bearing * All necessary hardware * Cover and components machined from billet stock adding strength and durability
( 2 )
$2,642.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
