Availability
Showing In Stock Items. Show All 314 Items.
Summit Racing™ MDS solenoid plugs are designed to plug the hole where the old MDS solenoids used to live. Commonly used when swapping MDS engines into older non-MDS cars or retro fitting non-MDS cams.
( 4 )
$40.99
Summit Bucks
ACDelco spark plug wire sets meet or exceed original equipment specifications for fitment and performance. They're made from top-quality materials, so you know they'll last. The assembled ignition wires are available with different terminal ends and boot ends. Over 700 sets are available to cover virtually any vehicle on the road today. Order the spark plug wires recommended for your application.
( 155 )
$66.99
Wiring Specialties Pro Series coil pack harnesses are designed for a direct drop-in installation. These new nylon loomed harnesses will look and perform flawlessly. Select the ignition coil wiring unit tailored for your year/make and engine application. Pro Series coil pack sub-harnesses feature: * Brand new construction * High-temperature nylon looming with adhesive shrink tubing * High-temperature wire (280 degrees F) * OEM connector specs (no cheap aftermarket connectors that fall apart) * Designed for a factory-like installation * OEM wiring connections and 'T' junctions—no soldered * Fully tested after production for an easy plug-and-play replacement * Turnkey engine start guarantee
( 25 )
$169.99
Morimoto projector headlight conversion harnesses are designed to adapt the 2009+ Dodge Ram projector-style headlights onto trucks that came standard with the basic dual halogen headlamps. The harnesses enable you to upgrade to the most modern Ram look without cutting, splicing, or modifying anything on the truck's factory harness. It's a seamless plug-and-play solution to keep your low and high beams under control on the new OEM projector lights using the original controls inside the cabin. The outputs will plug directly into the multi-pin connector on the back of each headlight from Dodge. Note: These adapters are tested and work on OEM/TYC headlights. At this time, they do not work on DEPO aftermarket headlights.
( 2 )
$94.00
Summit Bucks
The average vehicle today has hundreds of wiring connectors. ACDelco connectors are available for everything needed, from antennas to trailer wiring, as well as an array of multi-purpose connectors to maintain the optimal operation of your vehicle. Choose GM-recommended replacement wiring connectors to ensure the same performance, durability, and service life you've come to expect from General Motors products.
( 39 )
$4.99
—
$65.99
Summit Racing™ GM flex fuel sensor harnesses are assembled with OEM tooling, OEM Delphi (connector, lock, seals, and terminals), and use OEM harness wire colors. They're compatible with 2012 and newer GM LS Series engines.
Not Yet Reviewed
$10.99
ICT Billet LS ignition coil wiring harness extensions are assembled with OEM tooling, connectors, locks, seals, and terminals. They utilize factory harness wire colors. Compatible with any GM LS engine, these extensions are great for remote locating coils under the engine for a custom look. Don't take a chance with cheap wire connectors that use poor-quality components and have conductivity issues. Choose ICT Billet LS coil wire harness extension length and model recommended for your application.
( 2 )
$43.99
—
$105.99
Ford Performance Parts 5.0L Coyote auto trans engine wiring harnesses can easily power up your 2016-17 Coyote engine! Designed specifically for the late Gen II Coyote engines, these auto trans wiring harnesses allow your 5.0L Coyote engine to be used in conjunction with a 6R80 automatic transmission. The harnesses feature factory-style connectors for a quick plug-and-play installation—plus, Ford Performance pre-looms the harness for a factory fit and finish! Fitment Note: Only fits late-style coil-on-plugs built 2/24/16 and later. Also fits Ford Performance M-12029-M50E coil-on-plugs.
( 1 )
$282.99
Fleece Performance offers wiring pigtails and replacement connectors for a wide range of vehicles—including many Dodge, Chevrolet, GMC, Ford, and Ram models from the 1990s and up. These replacement parts are ideal for sensors, starter solenoids, cooling fans, and other components under the hood. Fully automated in-house wire cutting and terminal crimping ensure you get the highest quality connectors and pigtails to get your car or truck back on the road quickly. Order the model that corresponds to your electrical application.
( 3 )
$12.99
—
$299.99
The camshaft position sensors on your engine will only work with the correct pigtail connections. Chevrolet Performance offers these pre-made pigtails to properly fit the crank position sensor or the cam position sensor on select models. Trust Chevrolet Performance for OEM wiring replacement parts and more!
( 5 )
$44.99
ICT Billet LS VVT to non-VVT camshaft sensor adapters convert your VVT harness to a non-VVT sensor. These harnesses are plug-and-play and are assembled using OEM tooling with OEM Delphi connectors and terminals. Order the model recommended for your vehicle and engine application.
( 4 )
$43.99
Certain multiple displacement solenoids (MDS) have plastic housings and low-grade O-rings that fail in extreme heat. Dorman engine cylinder deactivation solenoids upgrade the plastic housing to aluminum and add premium, compression-tested O-rings to prevent premature failures. They include a new gasket and mounting bolt for a complete repair. Dorman engine multiple displacement system solenoids are application specific—made to directly replace the original MDS on certain Chrysler, Dodge, and Jeep applications from 2005-09.
( 3 )
$54.99
—
$227.99
ICT Billet throttle body extension harnesses are assembled with OEM tooling, OEM Delphi components (connector, lock, seals, and terminals), and OEM harness wire colors. Don't take a chance with cheap wire connectors; poor quality materials can have conductivity issues that will cause your engine to run poorly and be difficult to diagnose. ICT Billet throttle body extension harnesses provide quality you can trust. Order the model recommended for your application.
( 1 )
$43.99
ICT Billet has your LS swap covered with ICT Billet wiring pigtails. Options are available for standard and extended lengths on a multitude of applications. All designed to work with OE sensors for the easiest installation possible!
( 11 )
$22.99
—
$58.99
Aeromotive VaporWorx GM fuel module plugs with wiring pigtails feature genuine Delphi connector, terminals, and seals with 12-gauge/20-gauge XLPE cross-linked insulated wiring. Each of the wires are 12 in. long.
Not Yet Reviewed
$30.75
Hella battery master disconnect switches allow interruption of the main battery cable for effective protection. The positive or negative cables can be switched off as required. The keys can be removed while in the off position and the current is interrupted. Keep your things protected when you're not around.
( 43 )
$170.99
Morimoto OEM LED conversion harness H129K is designed to adapt the 2017-19 Ford F-250 LED headlights onto trucks that came standard with base H13 dual halogen headlamps. This wiring harness kit allows you to upgrade to the most modern Super Duty look without cutting, splicing, or modifying anything on the truck's factory harness. * PLUG-N-PLAY: This wiring harness kit is a seamless solution to keep your low and high beams under control on the new OEM LED lights using the original controls inside the cabin. The outputs plug directly into the multi-pin connector on the back of each headlight from Ford. * ADVANCED: The unique Morimoto relay harness is designed to retain full function of the OEM headlight just like it came from the factory. No hiccups, no flickering, no problem! * OEM GRADE: Aside from being ahead of the game from a technical standpoint, the Morimoto HD relay harness is also a work of art. With its wiring protected by abrasion-resistant Techflex mesh sleeving and its extruded aluminum relay shell that's been anodized and laser-engraved, the MotoControl harness will look factory fresh under the hood!
( 2 )
$368.00
ICT Billet offers wiring harness extensions for use with many Chevrolet LS-based engine applications from 1997 and up. These connectors are available in a variety of lengths, with 2, 3, 4, 8, or 10 pins. They can help with installing camshaft sensors, alternators, throttle pedals, throttle bodies, temperature sensors, MAP sensors, EVAP solenoids, and more. Each harness extension is made from factory-style materials and specs to ensure proper connection and optimum performance.
( 2 )
$43.99
ICT Billet camshaft position sensor adapter harnesses are used when converting from rear-block sensor to front-cover sensor. They will, for example, adapt a Gen IV LS sensor to a Gen III harness. The harnesses are made with OEM-grade TXL wire and assembled with OEM tooling and OEM Delphi (connector, lock, seals, and terminals). Order the model recommended for your application.
( 3 )
$43.99
On Sale
Terminator X standalone engine management systems offer performance at a budget price with plug-and-play operation. For use with these ECUs, Holley EFI Terminator X LT main engine harnesses are available to make connecting and servicing your system easier. Choose the one designed for your application.
Not Yet Reviewed
$574.95
$516.95
Due to the routing, exposure, and general lack of protection on the small charging circuit sense wires that are routed from Powertrain Control Module (PCM) to the alternator, it is common for wire damage to be experienced. And if the charging circuit MIL illuminates intermittingly or continuously on your truck dash, this may be your problem. A Fleece Performance charging circuit harness is your fix. These harness solutions are drop replacements—no cutting or splicing--for failed factory harnesses causing the problem. Each one installs directly in-line with factory connections, allowing you to reroute the alternator connection along the top side of the engine, and avoiding the unprotected channel routing on the underside of the engine. Designed and produced in-house, Fleece's manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need to get your truck back on the road quickly.
Not Yet Reviewed
$125.99
2018+ Dodge/Chrysler/Jeep vehicles all have a new security module that renders the OBD2 port inoperable for all aftermarket devices and tuners. Z Automotive double bypass kits overcome that obstacle by installing a secondary OBD2 port in the trunk, bypassing the security module. The quick plug-and-play installation takes under 5 minutes—with no wire splicing or cutting. The double bypass harnesses will also work on 2011-17 Chargers/300s and 2015-17 Challengers, for those who want to relocate their Z Automotive devices to the trunk, freeing up the factory OBD2 port for their Diablo Sport / SCT / HP Tuners device.
( 3 )
$55.00
Summit Bucks
When you need to make automotive repairs, ACDelco's selection of replacement wiring harness connectors offers you the best fit and function sockets and pigtails to do a variety of jobs. These quality-built, OE-like connectors and adapters provide you with efficient, less costly repair options for GM and American Motors vehicles. They're available in male or female, with an assortment of pins/cavities to fill your needs. Service your vehicle with a name you know and trust--ACDelco.
( 22 )
$23.99
ICT Billet LS3 MAP sensor connector component kits are compatible with 2009-and newer GM LS Gen 4 Series engines - "Bosch" style sensors. They replace broken, worn-out, or missing harness connectors for the MAP sensor. Kits include connector, retainer, terminals, and seals. * Compatible with 3-wire Gen 4 LS3 "Bosch" style, bolt-down sensors * Not compatible with LS Gen 3 clip-in sensors or "Brick" style sensors
Not Yet Reviewed
$22.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
