Availability
Showing In Stock Items. Show All 492 Items.
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1909 )
$109.95
$98.95
Give your ride an attitude adjustment with ACDelco crankshaft position sensors. Your original sensor can become worn or burnt and sensitive to hot engine temperatures, leaving you sitting on the side of the road. ACDelco offers high-quality, direct-fit replacement crankshaft position sensors to respond to your car's needs. Dozens of models are available for fitment on thousands of vehicles from the 1980s and up. Enhance the efficiency and performance of your ride; order the crankshaft position sensor recommended for your application.
( 23 )
$51.99
Failure or poor performance from a coil can result in a misfire, a rough-running, hard-starting engine, and excessive emissions. ACDelco ignition coils provide the performance needed to help keep vehicles running the way that they were designed. These coils have corrosion-protected laminations to guard them from the harsh operating environment. Primary and secondary coil windings often feature molded plastic protection. Order the replacement model designed for your vehicle and engine application.
( 32 )
$68.99
—
$71.99
Ford Performance Parts has a range of spark plugs to meet your performance needs. Designed for use in engines operated at sustained high rpm or with higher-than-stock cylinder combustion pressures, these plugs are made from quality materials and are designed to provide the spark that you need to fire up your Ford. Depending on the application, features of Ford Performance Parts spark plugs may include: * Available in heat ranges colder than the stock spark plugs * Sold individually and in sets * Pre-gapped at the factory * Offered in a variety of thread sizes * More robust construction for race applications
( 34 )
$56.99
—
$89.99
ACDelco spark plug wire sets meet or exceed original equipment specifications for fitment and performance. They're made from top-quality materials, so you know they'll last. The assembled ignition wires are available with different terminal ends and boot ends. Over 700 sets are available to cover virtually any vehicle on the road today. Order the spark plug wires recommended for your application.
( 140 )
$65.99
—
$85.99
ACDelco GM Genuine Parts mass airflow sensors are a key part of the engine management system, and they are GM-recommended replacements for your vehicle's original component. The MAF sensor measures the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject. This ensures the most efficient air/fuel mixture for the best fuel economy and power, while reducing harmful exhaust emissions. These original equipment mass air flow sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 24 )
$66.99
—
$96.99
Get more spark from your plugs with a set of Summit Racing™ 8mm ignition wires. They feature high-temperature silicone outer jackets and insulation, along with a fiberglass braid for more pull strength. These wires are available in custom-fit or universal sets. The custom-fit wires have both terminal ends installed; while the universal sets have the spark plug boots installed—and come with the distributor boot terminals. A variety of terminal ends and spark plug boot ends are available. Order the ignition wires recommended for your vehicle and engine application.
( 990 )
$54.99
ACDelco GM Genuine Parts flex fuel sensors will tell you the composition of your fuel. How much ethanol is in your system? Well, you're about to find out. These sensors measure the ethanol/gasoline ratio of the fuel being used—and then send a signal to your ECM so adjustments can be made for optimum operation of your flexible fuel vehicle. Allow GM Genuine Parts flex fuel sensors to provide the right answers for you to regain reliable, efficient performance.
( 7 )
$97.50
—
$102.99
Summit Racing™ offers OEM GM flex fuel sensors for a wide range of applications, including many Chevrolet, GMC, Buick, and Cadillac models from 2011 and up. These replacement sensors measure the ethanol/gasoline ratio of the fuel being used—and then send a signal to your ECM so adjustments can be made for optimum operation of your flexible fuel vehicle. The sensors are made from factory materials and specs to ensure proper fit and performance. Ensure the fuel system efficiency you expect; order the model recommended for your vehicle.
Not Yet Reviewed
$79.99
Dragon Fire Race Series spark plug wire sets feature the perfect combination of ultra-high heat resistance and reliable high-voltage delivery to outperform and outlive most other wires. Their multi-layer construction and industry-leading, spiral-wound conductors provide maximum voltage transfer, regardless of your coil type. Make strong spark delivery one less worry when building your ultimate performance project with a specialized set of Dragon Fire 3000 Race Series spark plug wires. Features and specs: * Extra-strong high-grade copper/stainless steel terminals * Superior EMI/RFI suppression technology * 500 ohm ultra-low resistance * Extra-thick-walled German-made silicon boots and jacket (600 degrees F-rated) * Silicon or ceramic boot options * Available boot angles include: 90, 135, and 180 degrees * PentaCore alloy conductor technology * Military-grade aramid fiber core support * Assembled in ISO9001:2015 and ISO/TS 16949:2009 certified facilities under strict quality control to ensure each wire is perfectly crimped and assembled for strength and perfect fitment for life * Designed for off-road use only
( 25 )
$59.95
—
$104.95
Morimoto projector headlight conversion harnesses are designed to adapt the 2009+ Dodge Ram projector-style headlights onto trucks that came standard with the basic dual halogen headlamps. The harnesses enable you to upgrade to the most modern Ram look without cutting, splicing, or modifying anything on the truck's factory harness. It's a seamless plug-and-play solution to keep your low and high beams under control on the new OEM projector lights using the original controls inside the cabin. The outputs will plug directly into the multi-pin connector on the back of each headlight from Dodge. Note: These adapters are tested and work on OEM/TYC headlights. At this time, they do not work on DEPO aftermarket headlights.
( 2 )
$80.00
Summit Racing™ LS ignition coil wiring harness extensions are assembled with OEM tooling, connectors, locks, seals, and terminals. They utilize factory harness wire colors. Compatible with any GM LS engine, these extensions are great for remote locating coils under the engine for a custom look. Don't take a chance with cheap wire connectors that use poor-quality components and have conductivity issues. Order the harness length needed for your application.
Not Yet Reviewed
$71.99
Dragon Fire High Performance Series spark plug wire sets deliver industry-leading performance, quality craftsmanship, and long-term reliability. At the core of these wires is a strong Kevlar® center with a low-resistance spiral-wound alloy conductor, tightly wrapped for maximum spark energy transmission up to 80,000 VAC. A high dielectric strength co-polymer compound coating is applied to the conductor to help eliminate voltage leaks and Radio/Electromagnetic Frequency Interference (RFI/EMI). The conductor is fully insulated in a durable, extra-thick silicone and EPDM sleeve for superior protection. All terminals are protected by heavy-duty, extra-thick walled, high-temp silicone boots to ensure optimal spark delivery and long service life. Heat Rated to 600° F. Designed as a direct replacement set, these spark plug wires are heat-rated to 600 degrees F. Order the set recommended for fitment on your vehicle.
( 12 )
$59.95
Finish off your ignition with a set of Summit Racing™ 8.5mm ignition wires for maximum spark delivery. Their spiral-wound copper conductor has extremely low resistance (just 50 ohm/ft.) combined with extremely high EMI suppression. In plain terms, these wires deliver the highest possible energy to the spark plugs so that your ignition upgrades reach their full potential--without creating interference for onboard electronics. The wires have a high dielectric strength insulator and heavy glass braid, topped with heavy-duty black silicone jackets and high-temperature black or gray boots (depending on application) to resist damage from heat and abrasion. They're available in universal and application-specific sets.
( 188 )
$63.99
Summit Bucks
Denso developed the auto industry's first compact stick-type ignition coil. The space-saving design of Denso ignition coils requires no high-tension ignition cables, fitting neatly into the engine's spark plug bore. Along with its stick coil technology, other advanced features include micro-sized driver circuits and diagonal inductive windings. That same expertise is put to use on all Denso ignition coils regardless of their configuration. Each Denso ignition coil is designed and optimized for its specific application, then continually improved by Denso's global engineering team. One key to effective combustion in today's low-emission, high-efficiency engines is consistent, high-energy ignition output. Denso direct ignition coils deliver it. Additional features and benefits of Denso ignition coils include: * Integrated driving circuit in the top of the coil * Superior-quality components and materials ensure optimal performance * Tested and inspected to ensure high quality * Diagonal windings eliminate sectioned bobbins, reducing size and weight * Improved coil efficiency lessens the need to generate high voltage * Eliminates phantom misfires * Small in size, light in weight, and easy to install * Provides maximum available voltage under all operating conditions
( 89 )
$52.99
—
$91.99
ICT Billet remote mount coil brackets mount eight coils and are designed to work with a wide variety of LS engine swaps. They are available to fit most OE and some Holley EFI coils. Made from aerospace grade billet aluminum, most feature a natural finish. The kits include two sets of brackets, bolts, and spacers where applicable. They work great for turbo setups or whenever a clean-looking engine bay is important. Most ICT Billet remote mount coil brackets are designed to be used with LT1 Camaro ignition wires.
( 20 )
$51.99
—
$72.99
ICT Billet LS ignition coil wiring harness extensions are assembled with OEM tooling, connectors, locks, seals, and terminals. They utilize factory harness wire colors. Compatible with any GM LS engine, these extensions are great for remote locating coils under the engine for a custom look. Don't take a chance with cheap wire connectors that use poor-quality components and have conductivity issues. Choose ICT Billet LS coil wire harness extension length and model recommended for your application.
( 2 )
$87.99
No matter how well the engine in your vehicle is built, it's not going anywhere on its own without quality spark plug wires. Hinson Motorsports 500 ohm spark plug wire sets will get your vehicle humming—and keep it purring down the road. These 8.5mm super conductor wires feature a spiral core, and are available for fitment on a variety of make/model applications.
( 21 )
$59.99
—
$62.50
Scott Performance high performance spark plug wire sets feature 10mm 30 ohm fiberglass jacketed wire with helically wound alloy cores. The plug/distributor boots are high-temp silicone materials and the terminals are stainless steel. All spark plug wire sets are handmade and individually tested to assure quality and performance. They're available in different colors and multiple configurations to provide the perfect fit for your engine. Order the spark plug wire set suited for your application.
( 43 )
$119.57
On Sale
Taylor 409 Pro Race Spiro-Wound core spark plug wires are high-tech, high performance wires available for the street or track. They provide continuous heat protection up to 600 degrees F and 102,000 V of dielectric strength. A tightly woven, heat-treated fiberglass braid is applied over 100 percent pure silicone 8mm ignition wire. These sets are available in black, red, and blue with color-coordinated, 100 percent silicone Pro Boots bonded to the wires. They also feature vibration-proof, double spring locking plug terminals. The Spiro-Wound core is for use when RFI suppression is required for maximum firepower without radio interference. Taylor 409 spark plug wires are a must for multiple discharge ignition systems, onboard computers, and electronic ignitions. Order the set and options designed for your vehicle and engine application.
( 293 )
$100.45
$90.40
The new standard in ignition wires for racers on a budget! Moroso Ultra 40 unsleeved custom-fit ignition wire sets are the most powerful and RFI/EMI-resistant wires available for racing today. Plus, their closely woven fiberglass, silicone-impregnated insulation provides up to 8,000 extra volts of protection. Features: * Kevlar® core that's four times stronger than Aramid cores * Class-leading 40 ohms of resistance per foot * Nickel copper alloy conductors for superior spark energy transfer * Extra-thick EPDM layer for greater dielectric strength * High-temperature silicone boots that can withstand heat up to 600 degrees * Locking stainless steel plug terminals
( 130 )
$93.99
—
$101.99
Proform LS ignition coil brackets are designed to mount your ignition coil packs up and off the Proform LS valve covers so that you can view the beautiful Chevrolet logo. They are a unique rail mounting system that directly attaches to the threaded holes on the Proform LS valve covers, and the individual coils attach to the rail so that they can be mounted in multiple positions.
( 16 )
$59.99
ACDelco GM Genuine Parts oxygen (O2) sensors are special feedback sensors on your vehicle's exhaust system and are GM-recommended replacements for your vehicle's original components. They measure the proportion of oxygen in exhaust gases, then using the measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Choose the O2 sensor designed for your vehicle.
( 99 )
$52.99
—
$81.99
Yuasa AGM high performance maintenance-free batteries have absorbed glass mat (AGM) technology and provide you with greater cranking power with 12 extra plates per battery over your standard AGM battery. They are the perfect fit for people who have better things to do than battery maintenance. They are permanently sealed, never need refilling, and are ideal for motorcycles, scooters, ATVs, riding mowers, and personal watercraft. Yuasa AGM high performance maintenance-free batteries feature a spill-proof design, which means that there is virtually no possibility of leaks. These batteries feature advanced lead-calcium technology that pumps up starting power. They also hold voltage longer and need less charging in standby or storage modes, like during winter storage.
( 233 )
$88.99
—
$102.99
Modal Header