Availability
Showing In Stock Items. Show All 69 Items.
Ford Performance Parts 2015-21 Mustang Performance GT350R brake kits upgrade the braking capabilities of your EcoBoost or base model GT. Original equipment on the GT350R models, these Ford kits feature 6-piston front Brembo glossy red aluminum calipers, 4-piston rears, and cross-drilled rotors. Ford 2015-21 Mustang performance brake kits include: * GT350R front calipers, rotors, brake pads, caliper adaptors * GT350R rear calipers, rotors, brake pads * GT350R parking brake assemblies * Rear GT350R knuckles * GT350R axle assemblies * All needed hardware
( 1 )
$4,191.99
Ford Performance Parts Coyote 5.0L crate engine control packs are designed to properly wire Ford Performance Parts 5.0L modular crate engines. They include a specially-calibrated PCM, an electronic throttle control accelerator pedal, an air intake assembly, an MAF sensor, and all necessary wiring and harness adapters. You can eliminate the complexity of wiring modular 5.0L crate engines with one of these Ford Performance Parts engine control packs. Additional technical information: * Control pack M-6017-504V available for 2015-16 5.0L 4V Coyote engines, M-6007-M50A and M-6007-A50NAA 5.0L 4V Ti-VCT crate engines with manual transmission; M-6007-A50SCA and truck engines require modifications * Control pack M-6017-A504VA available for 2011-14 5.0L 4V Coyote engines, M-6007-M50 and M-6007-A50NA 5.0L 4V Coyote crate engines with manual transmission (adds wiring for Speed Dial M-4209ADPT-AC to pick up transmission output speed); M-6007-A50SC, M-6007-A50XS, Boss 302 and truck engines require modifications * Supercharged engines, M-6007-A50SC, M-6007-A50SCA, M-6007-A50XS, Boss 302 and truck engines require custom calibration * Electronic throttle control accelerator pedal eliminates throttle cable routing problems * Unique controls pack harness replaces stock body harness and is designed for street rod installation * Features OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis * Includes power distribution module, air box, air inlet tube, MAF sensor, upper and lower radiator hoses and HEGO sensors * PCM (remanufactured) with Ford Performance calibration requires return-type fuel system, will not work with returnless fuel system * Installation of this PCM in a 2011-16 Mustang GT will result in a no-start condition * Not for use with a 2015-16 F150 engines
( 3 )
$2,083.99
A must for your 2015 and later model Mustang—Ford Performance Parts half shaft upgrade axles deliver a robust drivetrain solution to support the higher torque loads of your power-producing muscle car. These better-than-stock performance shafts feature larger diameters, proprietary materials, and CNC-machining—which makes them a stronger and healthier option for your high-powered, sticky-tire-running machine. And with their anti-wheel hop technology, your Mustang will surely put its power to the pavement. Factory half shafts can't handle the additional stresses of your modified ride; for optimum performance, install the Ford Performance Parts half shaft upgrade axles designed for your submodel.
( 2 )
$2,274.99
Ford Performance Parts 2015-18 Mustang GT350 brake upgrade kits add performance and style. These kits are complete with rotors, calipers, pads, and hardware. Add a racy red flair to your Ford Mustang with GT350 upgrades. Features: * Brembo 6-piston gloss red aluminum fixed front calipers * Brembo 4-piston gloss red aluminum rear calipers * Front rotors are 15.5 in. cross-drilled with directional vanes * Rear rotors are 14.9 in. cross-drilled
Not Yet Reviewed
$2,639.99
Ford Performance Parts 2015-17 Coyote 5.0L control packs take the complexity and mystery out of wiring a late model 5.0L Coyote engine! Here are the specs: * Designed to run 2015-17 5.0L 4V Ti-VCT Coyote auto transmission engines with 6R80 Mustang GT 6-speed auto transmission. Manual transmission engines require engine harness GU5Z-12A581-EF, available from your local Ford dealer. * Includes PCM with Ford Performance calibration * Includes electronic throttle control accelerator pedal that eliminates throttle cable routing problems * Unique control pack harness replaces stock body harness and is designed for custom vehicle builds * Features OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis * Includes power distribution module, air box, air inlet tube, MAF sensor, upper and lower radiator hoses, and HEGO sensors * PCM with Ford Performance calibration requires return-type fuel system. Will not work with returnless fuel system
( 2 )
$2,162.99
Mount an offensive to regain optimum acoustics with Borla ATAK cat-back systems. Your modern muscle car will not only be performance-enhanced, but also acoustically tuned to a loud, aggressive exhaust note. ATAK (acoustically tuned applied kinetics) technology produces the highest dB levels, avoiding distortion to retain clarity. Tuned like a graphic equalizer, these cat-back systems are custom-tuned for your specific vehicle, delivering the most desirable sound to your ears. Plus, you retain all of the power-adding capabilities of Borla's multi-core design. The exhausts are handmade by master craftsmen from premium 300-Series austenitic stainless steel and ultra-smooth, mandrel-bent piping.
( 541 )
$2,353.99
Stock clutches are made for stock horsepower. Mantic Clutch USA 9000 Series twin disc clutch kits are direct replacement upgrades that can handle 1,010 lb.-ft. of torque capacity at the crank and roughly up to 820 to 850 lb.-ft. at the wheels (capacity will vary with use and type of power adder being utilized). Engineered for serious performance builds, Mantic 9000 clutch kits are the proven answer to transfer all power to the ground and driving your vehicle with a Mantic Twin is easy, pedal effort remains relatively low, with approximately 12 to 15 percent increase over the OE clutch pedal feel. Available for many applications, Mantic Clutch 9000 Series twin disc clutch kits with their ceremetallic friction material and all billet construction make them the best for severe duty yet street friendly. Features and benefits: * SFI approved 1.1 * All billet construction * No Flex at high rpms * High-torque capacity * Lightened flywheel revs quicker compared to heavier OE flywheels * Completely rebuildable—modular construction makes service easy * 9 in. twin disc clutches reduce Moment of Inertia (MOI) for quicker more precise shifts * Ceremetalic friction material offers more heat resistance * OE hydraulic release bearing * All necessary hardware * Cover and components machined from billet stock adding strength and durability
( 2 )
$2,088.00
—
$2,874.00
Tremec T-56 Magnum XL manual transmissions begin with an "extended length" rear extension housing, intended for late model performance applications cursed with factory "semi-remote" shifters. By offering the owners of these vehicles a rigid, "direct-shift" with the Magnum XL, gone are the days of clumsy, rubbery-feeling gear changes. Like the rest of the Magnum line, the XL offers crisp, low-effort shifts, and an industry leading 700 lb.-ft. of torque capacity. And, thanks to its race-proven synchronizer technology, the Tremec T-56 Magnum XL is equipped to deal with all but the highest revving engines, with an rpm capacity nearing 8,000 rpm straight out of the box. Order the specs preferred for your application.
Not Yet Reviewed
$4,295.00
—
$4,495.00
The Ford Performance Coyote cast iron bare engine blocks provide an extremely strong foundation for high horsepower, boosted Coyote engine builds, offering superior strength over aluminum blocks for extreme racing and performance applications where stock blocks might flex or fail. In essence, this cast iron engine block is Ford's solution for pushing the Coyote engine far beyond its stock limits in a dedicated race application. Features and specifications: * Cast from a proprietary grade Class 50 iron * Deck height: 227mm (8.937 in.) * Rough bore can be finished to 93mm (3.661 in.) GEN 3 size * Maximum bore: 95.0mm (3.740 in.) * Maximum stroke: 99mm (3.897 in.) * Maximum displacement: 5.6L * Standard Coyote 100 mm bore spacing * Lengthened bores for added strength * Revised deck design for added strength around the water jackets * Designed for 12mm ARP head stud kit (456-4303) * Head bolt holes NOT machined for the production length head bolts * Material available to drill and tap for production length head bolts * Billet steel 6-bolt main caps with ARP hardware * Accepts Gen 1 and Gen 2 Coyote 5.0L cylinder heads * Accepts Gen 1, Gen 2, and Gen 3 GT350 5.2L cylinder heads * Requires head gasket to match cylinder head * Weight = 203# when finished to a 94mm bore * Recommended forged steel crankshafts (M-6303-M52B or M-6303-M52P)
Not Yet Reviewed
$3,639.99
Mantic Clutch USA offers 9000 Series triple-disc clutch and flywheel kits for a wide range of vehicles—including muscle and sports cars like Corvette, Camaro, Mustang, Challenger, Viper, and more. These ultimate combos include everything needed to replace your worn-out clutch, including a matched lightweight flywheel. They're perfect for any supercharger, nitrous, N/A or turbo car that needs a durable rebuildable clutch. If a single or twin disc won't handle the power, Mantic triple disc is the big boy upgrade for big power cars. Order the kit recommended for your vehicle. Product features: * SFI-approved 1.1 * All-billet construction * No flex at high-RPM * Light pedal feel * High torque capacity * All-in-one complete kit * Lightened aluminum flywheel * Completely rebuildable * 1515 torque capacity at crank * 1250-1285 torque capacity at wheels * NOTE: Capacity will vary with use and type of power-adder being utilized Complete kits include: * Lightened aluminum flywheel (12 lbs.) * Triple disc clutches * Billet intermediate plates * Ceremetalic friction material * New OE hydraulic release bearing * New flywheel and clutch bolts * Install hardware * Aluminum carrying case * Detailed instructions
Not Yet Reviewed
$3,705.00
Injector Dynamics ID2600x fuel injectors are developed specifically for use with liquid fuels, featuring corrosion-resistant internals, and long-term compatibility with ethanol and methanol. ID2600-XDS fuel injectors have the highest flow rate of any injectors offered by Bosch and flows 50 percent more than the ID1700x units. Injector Dynamics ID2600x fuel injectors feature Dual Slope Matching, a method of matching the flow rate in both the linear and nonlinear operating range, to provide better cylinder-to-cylinder consistency at low pulse widths.
Not Yet Reviewed
$2,940.00
Kooks Headers race long tube headers will deliver high performance to your racer. Their full-length race headers are built from T-304 stainless steel and are available in several primary tube and collector diameters to match your application needs. Optimize scavenging and increase power with top-quality Kooks race long tube headers.
( 64 )
$2,492.15
Offering high performance exhaust for over 50 years, Kooks header and catted connection kits are designed for maximum power, built from T304 aircraft-quality stainless steel and race tested. Solely for competition purposes, they are offered for a full range a vehicle applications. Kooks header and catted connection kits package long tube headers and a catted X-pipe, H-pipe or Y-pipe.
( 1 )
$2,424.29
Aeromotive 5.0 GPM brushless variable speed in-tank gear pumps provide multiple mounting options in almost any fuel cell or tank. Designed for the custom tank builder or fabricator, these units offer the advantage of pump speed control via a 0-5 V analog DC input signal. The 5.0 GPM in-tank fuel pump assemblies are constructed for cool and quiet operation. Order the model that's compatible with your application.
Not Yet Reviewed
$2,186.15
Want to edge out the competition? Tune your suspension setup for more powerful launches, improved stability, and increased traction without sacrificing your OE street ride quality. Make an upgrade to Steeda's S550 Ford Mustang Stage 3 Drag Packs, available for a variety of V8 models from 2011 and up.
Not Yet Reviewed
$2,549.95
On Sale
Customize your car style and ride, with Koni GTS coilover suspension. With a history developed in Formula 1 racing, Koni knows how to maximize the control of your suspension setup. Koni GTS coilover suspension kits combine world-class Koni Sport adjustable valving, linear lowering springs, ride height adjustable perches, and threaded bodies--a full kit ready to install on your car. Made for both on road driving and weekend track days, the GTS coilover range offers the user a fully customizable suspension package, ride height adjustable and valving adjustable, allowing a wide range of suspension setups. Look stylish with maximum suspension practicality; select the Koni GTS coilover kit designed for your vehicle.
Not Yet Reviewed
$2,198.67
$2,066.75
Manufacturer Rebate
RAM Clutches has simplified clutch selection by offering RAM Concept 10.5 Dual-Disc Metallic Complete Clutch Kits that include everything that you need for a seamless installation. Each complete clutch kit includes a RAM Concept 10.5 clutch kit, RAM billet steel flywheel, RAM slave cylinder, and flywheel bolts. The Concept 10.5 dual disc metallic clutch kits are the logical choice when superb drivability and maximum holding power are needed. Key features of the Concept 10.5 include an increased clamp load pressure plate and larger diameter 10.5-inch premium-faced metallic clutch discs. The pressure plate provides a silky-smooth clutch pedal feel, while the larger 10.5-inch discs provide maximum holding capacity when compared to the OEM clutch or other aftermarket kits. The Concept 10.5 unit also utilizes a sprung hub top disc that helps dampen and quiet the initial clutch engagement. A strap driven floater plate design ensures quiet operation. An outstanding driving experience is what you can expect when you choose a RAM Concept 10.5 Dual-Disc Metallic Complete Clutch Kit. When only the best will do, choose RAM!
Not Yet Reviewed
$2,100.00
RAM Pro Street dual disc clutch kits are precision-balanced for smooth operation—and come equipped with a billet cover for optimum release length, a comfortable pedal effort, and a high diaphragm finger position for excellent high-RPM shifting capability. The sprung hub top disc absorbs shock and reduces driveline noise. Pro Street kits are available with your choice of an organic friction disc or a metallic disc. Organic disc models are capable of handling 500 to 800 hp; the metallic disc models can handle between 600 and 1,200 hp. RAM Pro Street dual disc clutch kits include a billet aluminum, SFI-certified flywheel with a steel insert that has sufficient mass to draw heat away from the clutch without distortion. Some kits are available with a steel flywheel. Order the clutch recommended for your vehicle and engine application.
( 1 )
$2,159.00
Specializing in high performance EFI fuel system solutions, DeatschWerks X3 Series fuel pump modules for the Ford F-150 are built and packaged with components that work together to deliver the flow you need and the OE functionality you want. Each module includes accommodation for three pumps, integration of a return fuel line, and retention of all functionalities of an OE module. The DW X3 modules consist of a top-hat, center section, installation kit, and bucket. DeatschWerks X3 Series fuel pump modules are available with no pumps, triple DW400 pumps, or as a complete package with module, pumps, and PTFE plumbing kit. Choose the DW X3 desired for your F-150. X3 module features: * OEM tank fitment * Anodized aluminum construction * Retains all OEM sensor, capacity, and surge features * 310 percent increase over OEM F-150 pump module * Supports over 1,900 whp on pump gas forced induction * Fits up to three DW100, 200, 300, 400 or 420 fuel pumps
Not Yet Reviewed
$2,199.00
Edelbrock E-Force 8-rib belt drive upgrade kits are intended to upgrade the factory Ford 5.0L Coyote 6-rib belt drive system to an 8-rib to help reduce belt slip encountered in high boost applications with a smaller pulley. It is an ideal upgrade for an E-Force equipped Mustang GT, F-150, or crate engine. Each kit includes a water pump pulley, alternator pulley, harmonic damper, all necessary idler pulleys and tensioners, and hardware. E-Force 8-rib supercharger pulleys are sold separately and are available in sizes from 2.625 in. up to 3.250 in.
( 1 )
$2,369.95
XClutch Stage 1 clutch kits offer a variety of performance upgrades for both street and track applications. They are designed in-house and normally utilize a single plate organic, ceramic, or carbon friction disc along with an upgraded factory-style pressure plate. XClutch kits utilize a similar mechanism to the factory clutch, making them ideal enhancements for most vehicles with low to mid-level performance modifications. Stage 1 clutch kits are available in three distinct performance clutch packages—sprung, rigid solid, and steel-backed organic. Features and benefits of each: * 1A sprung organic—this range has been specifically designed for street vehicles that have minor engine and general performance modifications. These kits offer a sprung organic friction disc that allows for great drivability, while offering improved clamping force through the use of a performance pressure plate. * 1G rigid solid organic—with a rigid center version of the organic disc, this range is ideal for street vehicles and light track use. These kits are often available with a lightweight alloy pressure plate and performance flywheel. * 1T steel-backed organic--this range offers a higher burst strength by bonding the organic friction material directly to a steel backing plate. These kits are ideal for high performance vehicles used on the street with occasional track use.
( 5 )
$2,276.95
Gain powerful sound, better performance, and improved mileage with a set of Stainless Works performance headers. Constructed from high-quality 304L stainless steel, the headers are CNC mandrel-bent and have durable 3/8 in. thick flanges. They're available to fit the factory connection point, or attach to a custom Stainless Works cat-back exhaust. Order the style you prefer and the model designed for your year/make and engine application.
( 30 )
$2,256.25
Stock clutches are made for stock horsepower. Mantic Clutch USA triple disc clutch kits should be your choice for any big horsepower build, handling 1,515 lb.-ft. of torque capacity at the crank and roughly up to 1,250 to 1,285 lb.-ft. at the wheels (capacity will vary with use and type of power adder being utilized). Perfect for supercharger, nitrous, or turbo performance builds, Mantic triple clutch kits, with their ceremetallic friction material and all-billet construction, are more durable yet very friendly for everyday driving. Pedal effort remains relatively low, approximately 12 to 15 percent increase over the OE clutch pedal feel. Available for many applications, Mantic triple disc clutch kits are modular in construction offering ease of service and complete rebuildability. Features and benefits: * SFI approved 1.1 * All billet construction * No Flex at high rpms * High-torque capacity * Lightened flywheel revs quicker compared to heavier OE flywheels * 9 in. triple disc clutches reduce Moment of Inertia (MOI) for quicker more precise shifts * Ceremetalic friction material offers more heat resistance * OE hydraulic release bearing * All necessary hardware * Cover and components machined from billet stock adding strength and durability
Not Yet Reviewed
$3,472.00
Pedders' renowned expertise plus advanced technology equals XA Extreme coilover kits that let you click, tune, and play! These height-adjustable coilover shocks are built to Pedders' stringent quality standards. They feature sports-calibrated tunable damping, motorsports coil springs individually tuned to suit each application, and a host of other high performance features—including engineered mounting bracketry. Plus, shocks have a 30-position adjustable bump and rebound damping setting which offers a fine-tuned suspension that's ready to play with just a click of a button. For the performance enthusiast, Pedders XA Extreme coilover kits are a great fit. Order the kit designed for your vehicle application.
( 13 )
$2,384.96
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
