Availability
Showing In Stock Items. Show All 34 Items.
Ford Performance Parts 5.0L Coyote Gen 4X crate engines are modern 5.0L 32-valve DOHC V8s that utilize advanced features, such as direct and port fuel injection, twin independent variable camshaft timing (Ti-VCT), high-flow aluminum cylinder heads, and 12:1 compression to deliver 460 hp and 420 lb.-ft. of torque (with premium fuel). The all-aluminum cylinder block features plasma transferred arc spray-in liners, cross-bolted main bearing caps, and thick main bearing bulkheads for strength. Ford's Gen 4X 5.0L Coyote features a single 80mm throttle body for easier packaging in various applications. Features and specs: * Hypereutectic aluminum pistons * Sintered steel connecting rods as used on the Boss 302 Mustang * Forged steel crankshaft * Single 80mm "drive-by-wire" throttle body * 9.5 qt. steel oil pan * Composite lightweight intake manifold * Mustang GT 409 stainless steel exhaust manifold—right side only * Engine mount bosses and bellhousing mount pattern common to 5.0L modular engines * 10R80 flexplate included * Engine weight: 445 lbs. without front accessory drive components Note: Driver side exhaust flange utilizes 5.2L pattern
Not Yet Reviewed
$11,704.99
VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.
( 73 )
$3,215.99
—
$7,502.99
BluePrint Engines Pro Series Chevy LS 376 c.i.d. 495 hp EFI truck long block crate engines are fully Dyno tested, passed vigorous inspections, and are prepared for those wanting maximum horsepower and durability. Features, specs, and contents: * 495 hp, 490 ft.-lb., compression ratio 10.7:1 * Cast Iron block with 6-bolt main * Nodular iron crankshaft * Connecting rods with 150,000 psi bolts * Hypereutectic pistons * Internal balanced rotating assembly * BluePrint LS3 aluminum cylinder heads -- 69cc chamber -- 2.165 in. intake/1.59 in. exhaust valves -- 259cc intake/102cc exhaust runners * BluePrint hydraulic roller cam -- .553 intake/.553 exhaust lift -- 218 intake/224 exhaust duration at .050 -- 113-degree lobe separation, 110ICL * L92 truck intake manifold * Fuel injectors and rail * Truck water pump * Truck harmonic balancer * LS low-profile aluminum oil pan * GM-style smart coil packs * Spark plugs and wires * Valve covers * Oil pump * Dipstick
Not Yet Reviewed
$10,949.00
Ford Performance Parts Aluminator 5.2 XS long block crate engines are the most powerful, naturally aspirated, modular engines ever built by Ford. Utilizing the technology and hardware originally developed for the Shelby GT350 Mustang, the Aluminator 5.2 XS engines have a rating of 580 hp—making them worthy successors of their previous rendition, the A50XS. They're hand-assembled with premium aftermarket components, along with unique components developed specifically for the Cobra Jet racing program. Ford Performance Parts has created a balanced combination of high-end horsepower and strong mid-range torque in the ultimate cross-plane crankshaft long blocks: the Aluminator 5.2 XS engines. Summary of Aluminator XS features and specs include: * Designed to work with 2015-17 Mustang GT electronics—custom calibration required * 580 hp * 445 lbs.-ft. torque * 5.2L 317 cu. in. * 12:1 compression ratio * Hard-anodized forged pistons with low-friction coating * Unique H-beam connecting rods with bolts * Unique Ford Performance forged steel cross-plane crankshaft * Ford Performance Shelby GT350 cylinder block * Ford Performance Shelby GT350 oil pan, featuring integrated windage and slosh baffles, as well as an integrated oil pickup * Ford Performance Cobra Jet tuned intake (will not clear production 2015-17 hood without modification) * Ford Performance dual 65mm bore throttle body * Four-valve-per-cylinder Shelby GT350 fully CNC-ported aluminum heads with roller-finger camshaft followers * Unique Ford Performance camshafts * Camshaft specifications: Intake—14mm lift/270 degrees duration, exhaust—14mm lift/270 degrees duration * Low-leak rate Variable Cam Timing (VCT) phasers * Robust primary timing chains, as used on Shelby GT350R * Ford Performance 47 lb. fuel injectors * Ford Performance M-12A227-CJ13 high-rpm pulse ring * Unique Ford Performance blue coil covers with added unique badging—only on the Aluminator 5.2XS * Ford Performance zero (0) heat-range spark plugs * Ford Performance oil filter * 200 amp alternator and Front Engine Accessory Drive (FEAD) kit, as used on the Cobra Jet race car
Not Yet Reviewed
$24,500.00
BluePrint Builder Series LS376/510HP Standard Edition EFI crate engine and TKX transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 510 horsepower, this standard edition builder series includes a polished pulley kit and T56 manual transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this engine assembly produces 440 lbs.-ft. of torque. When you need or want a new powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/510HP Standard Edition EFI crate engine and TKX trans combos. Product description and specifications: Block: * High strength cast iron (LSX Style) block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0662 in. Bore * 6-bolt main Rotating Assembly: * Nodular iron crankshaft * 3.622 in. stroke * 6.098 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * Internally balanced front and rear Cylinder Heads: * BluePrint LS3 aluminum cylinder heads * 69cc chamber * 2.165 in. intake/1.590 in. exhaust valves * 259cc intake/102cc exhaust runners Cam Specs: * Hydraulic Roller Cam * 0.612 Intake/0.585 Exhaust Lift * 225 Intake/238 Exhaust duration * @.050-113 Degree Lobe Separation Ignition Timing: * Ignition Timing and Spark Advance are Controlled by BluePrint Engine Calibrated ECU * Transmission Controller Required if pairing to an automatic (ECU Does Not Offer Transmission Control) Other parts: * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS Swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and Fuel Rail Kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Notes: This engine requires a non-weighted flex plate such as (BPP12654640) / flywheel (BPPLS1611). Recommended fuel: 91 Octane. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The BluePrint Engines LS controller package contains a fully tested, calibrated, locked ECU, optimized for this specific engine. This package has undergone extensive testing for performance, reliability and the safety of you and your engine.
Not Yet Reviewed
$21,249.00
BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 530 horsepower, this standard edition builder series includes a black pulley kit and 4L65/70E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this assembly produces 495 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * New Cast Iron 6.2L * Main caps are 6-bolt * One-piece rear main seal * Reluctor wheel – 58x * Cam sensor – 4x (in timing cover) * Knock sensor provision on side Rotating Assembly: * Nodular iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift - 238 * Lobe separation angle (LSA) – 113 degrees * Intake centerline – 110 degrees Ignition Timing * Firing order is 1-8-7-2-6-5-4-3 Assembled 4-speed Transmission Package: * Complete 4L65/70E package with electronic transmission controller * Torque converter with 2,200–2,400 rpm stall * Non-weighted flexplate * Starter Other Components: * Holley Terminator X Max Gen IV complete EFI engine management system, and DBW (Drive-By-Wire) pedal kit * DBW throttle body * GM Muscle-car Swap oil pan * Loaded intake manifold * Fuel injectors (EV6 type) and rail * Coil packs * Spark plugs and wires * Water pump * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys * Champion 3015 spark plugs (0.040 in. gap) Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91 octane. Recommended oil is BPP710.
Not Yet Reviewed
$22,699.00
BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and TKX transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 530 horsepower, this standard edition builder series includes a polished pulley kit and TKX manual transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this assembly produces 495 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and TKX transmission combos. Other product features, items, and specifications include: Block: * New Cast Iron 6.2L * Main caps are 6-bolt * One-piece rear main seal * Reluctor wheel – 58x * Cam sensor – 4x (in timing cover) * Knock sensor provision on side Rotating Assembly: * Nodular iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift - 238 * Lobe separation angle (LSA) – 113 degrees * Intake centerline – 110 degrees Ignition Timing * Firing order is 1-8-7-2-6-5-4-3 Assembled 5-speed TKX Transmission Package: * McLeod Super Street Pro twin-disc clutch * Hydraulic throwout bearing * Bellhousing * Non-weighted billet flywheel * Starter * Gear ratios are 2.87:1 (first), 1.89:1 (second), 1.28:1 (third), 1.00:1 (fourth), and 0.68:1 (fifth) * Torque converter with 2,200–plus rpm stall Other Components: * Holley Terminator X Max Gen IV complete EFI engine management system, and DBW (Drive-By-Wire) pedal kit * DBW throttle body * GM Muscle-car Swap oil pan * Loaded intake manifold * Fuel injectors (EV6 type) and rail * Coil packs * Spark plug wires * Champion 3015 spark plugs (0.040 in. gap) * Water pump * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys. Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91 octane. Recommended oil is BPP710.
Not Yet Reviewed
$22,449.00
Chevrolet Performance LT1 6.2L E-Rod long block crate engines have it all. They're architecturally similar to the LS family of small block engines, but with a unique block casting, cylinder head design, oiling system, and more. LT1 engines also combine advanced technologies—including direct-injection and continuously variable valve timing to support an advanced combustion system. Offered with a wet-sump or dry-sump oiling system, the Chevy E-Rod engine systems include the specially designed engine controller for retro-fit applications and harness needed to get the engine running. Engine specs and features: * Cast aluminum with 6-bolt nodular iron main bearing caps * Direct-injection, spark-ignition Gen-V small block V8 * Horsepower: 455 at 6,000 rpm * Torque: 465 lbs.-ft. at 4,600 rpm * Crankshaft: Forged steel * Connecting rods: Forged powdered metal * Pistons: Eutectic * Camshaft type: Billet steel roller * Valve lift (in.): .561 intake/.531 exhaust * Camshaft duration (at 0.050 in.): 200 degrees intake/212 degrees exhaust * Cylinder heads: Aluminum, rectangular port D/I * Valve size (in.): 2.13 intake/1.59 exhaust * Compression ratio: 11.5:1 * Rocker arms: Investment-cast, roller trunnion * Rocker arm ratio: 1.81:1 * Recommended fuel: Premium pump * Maximum recommended rpm: 6,600 * Reluctor wheel: 58x * Balanced: Internal * Engine control module * Exhaust manifolds * Catalytic converters * Mass airflow sensor and sensor boss * Oxygen sensors and sensor bosses * Air filter * Accelerator pedal * Evaporative emissions canister * Instruction manual
Not Yet Reviewed
$12,803.20
ATK specializes in muscle. With the highest quality internal parts and dyno-proven combinations of every engine built, ATK is able to add the most bang for your buck and back it up with an industry leading warranty. This ATK High Performance GM LM7 5.3L 500 hp long block crate engine is fitted with AFR heads and FiTech EFI. Engine specifications: * Horsepower: 500 * Torque: 440 * Block: OE LM7/5.3L iron * Bore/stroke: up to 3.903 in. x 3.622 in. * Displacement (cu.in): up to 347c.i.d. * Crankshaft: OE GM 24 tooth reluctor wheel * Rods: OE powder metal * Pistons: Hypereutectic 10.1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: Custom performance grind * Timing chain: OE single roller * Cylinder heads: -- AFR CNC ported aluminum -- 59cc/200cc -- 2.000 in. intake/1.570 in. exhaust * Rocker arms: OE 1.7 ratio * Oil pump: Melling M295 * EFI System: -- FiTech Ultra port injection LS1 750 hp with transmission control -- Wiring harness and ECM/TCM included * Fuel injectors: FiTech 55 lb. * Spark plugs: Autolite #104 * Spark plug wires: 8mm * Balancer: Stock internally balanced
Not Yet Reviewed
$8,899.99
ATK High Performance Chevy Gen V LT1 376 short blocks are built for naturally aspirated engines, boost or nitrous. ATK starts with a new GM LT block and outfits it with a Manley 4340 forged crankshaft, H-beam rods with ARP2000 bolts, Manley 2618 forged pistons and Total Seal CS AP ring package with steel top rings. These short blocks will have the factory piston squirters installed. Engine Specifications: * Block: New GM LT1/LT4 * Bore/Stroke: 4.065 in. x 3.622 in. * Displacement (cu.in): 376 c.i.d. * Crankshaft: Manley 4340 forged 58-tooth reluctor wheel * Rods: Manley 4340 forged H-beam 6.125 in. ARP 2000 bolts * Pistons: Choice of 2618 forged +12cc dished or -2cc domed * Rings: Total Seal CS AP steel top ring with Napier 2nd ring set * Camshaft bearings: Installed and clocked to OEM position * Freeze plugs: Installed and sealed * Oil galley plugs: Installed and sealed Recommended Components: * Balancer -- Internal balance * Flex plate / Flywheel -- Internal balance * Head gasket: .051 in. or per application * Oil pump: Factory Engine Info: * Oil: 5W30 non-synthetic for first 3,000 miles * Oil filter: Wix or K&N, per application
Not Yet Reviewed
$6,998.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
