Availability
BD Diesel Killer grid heater upgrade kits are purpose-built to address a major flaw in the 6.7L Cummins engine--the electrical connection to the intake grid heater. When powering the grid heater, 200 amps pass through a small bolt and nut inside the intake and over time is known to deteriorate and eventually arc and break off. The nut drops into the engine, leading to extensive damage to the piston, head, and valves. BD's Killer kits upgrade that flawed electrical circuit by eliminating the problematic bolt and nut inside the intake while retaining stock functionality of the heater. The kits are cost-effective and easy to install. Additional features: * Allows for full heat output with the stock intake grid heater * Fully emissions compliant * No modifications or tuning required * Self-locking threads built into the lower busbar prevent backing out and compromising electrical connection * Kit includes replacement hardware and gaskets, along with special tools required for the job
( 3 )
$206.95
Melling high-volume oil pumps give you an additional 20 to 25 percent of much-needed oil volume for your performance application. For those of you who need added pressure, many pumps are supplied with a high-pressure spring (where noted). The pumps are built using a proprietary casting process, which yields maximum performance and reliability. Every Melling oil pump is completely pressure-tested, including idle and bypass pressure, before it leaves the factory. Dozens of models are available for fitment; order the pump and options needed for your vehicle.
( 355 )
$160.99
—
$212.99
When you're looking to replace leaking or worn-out engine seals, Fel-Pro head gasket sets have you covered. Ideal for your stock rebuilds or street-driven cars and trucks, Fel-Pro gaskets will have you back on the road in no time. They're available in hundreds of configurations for fitment on countless vehicles and engine types. Order the set designed for your car, truck, van, or SUV. (These gaskets are not intended for race applications.)
( 371 )
$196.99
—
$205.99
Mahle Original offers engine gasket sets for a variety of cars, trucks, and Jeeps. These full gasket sets include the many seals needed to rebuild your engine—all in one convenient package. The gaskets are made from a variety of materials, such as multi-layered steel or molded rubber, for use on various components. Order the Mahle Original engine gasket kit recommended for precise fitment on your vehicle application.
( 24 )
$180.99
Your valves will open more quickly from a fully closed to a fully opened position with a roller setup, compared with conventional flat lifters. With Sealed Power Hydraulic roller lifters you will notice higher performance, quieter engine operation, and more horsepower. They also provide proper vacuum and idling capabilities.
( 27 )
$128.99
—
$178.99
Summit Bucks
ACDelco Gold Automotive AGM batteries have high-cycling capabilities, are remarkably charge-receptive, and are necessary for start/stop applications. These batteries are also maintenance-free, 100 percent pressure-tested against leaks, and are manufactured to resist corrosion. Best of all, they are backed by ACDelco's outstanding warranty coverage. When reliable starting power is a priority— ACDelco Gold Automotive AGM batteries are the answer! Additional features include: * Absorbed Glass Mat design is 100 percent leak and spill-proof, because the electrolyte is permanently held in the glass mat separator, instead of free flowing within each cell * Oxygen recombination reduces water loss and reassures maintenance-free performance * ACDelco Gold Automotive AGM batteries have longer life expectancy in traditional vehicle applications, due to a maintained pressure on the plates, which significantly reduces the amount of active mass lost from the grid
( 330 )
$188.99
Mopar Replacement rocker arms offer an original equipment fit. That means their fitment and install will be hassle-free. These genuine OE Mopar parts will help to keep your vehicle's engine running its best. Select the Mopar Replacement rocker arms designed for fitment for your vehicle application.
( 18 )
$161.99
Fox 2.0 Adventure Series shocks are available for fitment on a wide range of trucks—including many Jeep, Chevy, GMC, Ford, Ram, Dodge, and Toyota models from 1994 and up. They're available for the front and/or rear of stock and lifted vehicles. The shocks utilize Fox's proven damping technology to provide a comfortable on-road ride and predictable off-road handling in a variety of conditions. Adventure Series shocks use a 2 in. O.D. steel body construction with a large 5/8 in. heat-treated hard chrome plated shaft for increased strength and durability. The monotube design features an internal floating piston (IFP) to separate the shock oil from the high-pressure, nitrogen charged gas chamber. This eliminates oil aeration for fade-free performance from the factory-tuned precision valving. Additional details: Body: 2.0 in. smooth bore and honed seamless alloy bodies Body plating: Thick silver powdercoat Internal reservoir: Internal IFP monotube reservoir design separates shock oil from the high-pressure nitrogen Shaft: 5/8 in. hard chrome plated heat-treated alloy steel Oil: JM92 Advanced Suspension Fluid for improved performance at variable temperatures Bushings: Quiet nitrile rubber allows for increased suspension articulation Mounting: Direct replacement for stock and aftermarket lifts kits
( 8 )
$109.95
Summit Racing™ offers Extreme Performance coated brake rotors for thousands of vehicles, from the 1960s and up. They're manufactured on CNC machines using CAD-CAM design for perfect balance and alignment, then coated with silver zinc to resist corrosion. These rotors provide you with maximum stopping power, reduced warping, and longer life. The cross-drilled holes and slots provide an exit route for gasses and dust, resulting in better heat dissipation and less brake fade under hard use. Other solid-surface rotors allow gasses to create a cushion between the pad and the brake rotor, resulting in poor brake performance. The cross-drilled holes and slots clear away harmful gasses, restoring full pad-to-rotor contact. These coated rotors are a terrific performance upgrade when replacing your brakes. Order the model recommended for fitment on your vehicle.
( 68 )
$159.98
—
$249.98
If your truck eats factory ball-in-socket sway bar end links for breakfast (or, say, every 50,000 miles), these heavy-duty SuspensionMAXX sway bar end links are the solution! They're made from high-grade, corrosion-resistant steel combined with high-Durometer polyurethane and rubber components for years of heavy-duty service. Plus, they're available for stock height or lifted/leveled trucks.
( 178 )
$159.99
—
$169.99
Bilstein B8 5100 Series shocks feature a monotube design for cooler, more efficient operation and longer life. They have the largest available piston diameter, providing superior handling and performance. The shocks' patented digressive valving instantly reacts to changing surface conditions for maximum comfort and control—on and off the road. These shocks also have split compression and rebound valving tuned for each specific application. Order the model designed for your year/make/model. Additional features: * 2 in. seamless extruded tube * 14mm centerless-ground, case-hardened, chromed, and super-polished rod * 46mm Bilstein digressive piston * Self-adjusting, deflective-disc independent rebound and compression
( 1406 )
$118.00
—
$168.00
On Sale
Professional Products Chrysler Powerfire ignition coil packs are designed to give your ignition system a shot in the arm. They produce substantially more voltage than the stock coil packs and provide a longer spark duration. This assures that all of the intake charge will be combusted to wring out the maximum amount of power and torque from each engine revolution.
( 32 )
$189.99
$170.99
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 8 )
$114.99
—
$115.99
Eliminate dry starts with one of these Melling prelube engine oilers, a must-have when building or maintaining an engine. These prelube engine oiler tanks hold fresh oil to prime your whole system, eliminating premature wear due to dry starts. They're compatible with virtually any make/model application. Trust Melling prelube engine oiler tank kits to help your engine start its life right.
( 6 )
$241.99
Replace your worn or ticking lifters with premium-quality valve lifters from Crown Automotive. They're available in a variety of hydraulic styles—such as flat tappet, roller, and lash adjuster. Order the model designed for fitment on your specific vehicle.
( 2 )
$139.99
—
$146.99
Fox Racing Shox 2.0 Performance Series IFP smooth body shocks deliver race-dominating performance in a hassle-free bolt-on package. Their heat-reducing design includes a metal-impacted aluminum shock body that dissipates heat faster than conventional steel. Inside, the Internal Floating Piston (IFP) separates the shock oil from a high-pressure nitrogen gas chamber, providing a predicable ride quality capable of handling the roughest road conditions. Combine these new technologies by Fox Racing Shox, together with a competitive price—and you have a winning combination! Choose the universal or vehicle-specific model that best suits your application. Tech specs of 2.0 Performance Series IFP smooth body shocks: * Aluminum shock body dissipates heat, will resist rust over time * Clear-anodized for a durable finish * Application-specific valving to maximize off-road performance * Components: black anodized billet aluminum * Shaft: hard chrome plated heat-treated alloy steel * Race-developed high-flow piston design * Quiet nitrile rubber bushings for increased suspension articulation * Redundant sealing pack system main seal, wiper seal, scraper seal * JM92 advanced suspension fluid for improved performance at variable temperatures * Extended length applications available for stock and aftermarket lifts kits * Optional roost shield kit available (sold separately) to protect shock shaft and seals from rocks kicked up by tires Adjustments: * Nitrogen pressure * Compression valving * Rebound valving
( 63 )
$199.26
—
$229.95
Summit Racing™ engine lift plates allow you to lift your engine up by its intake manifold for easier maneuvering. You can also use them as manifold covers when you store your engine.
( 7 )
$134.99
McGard lug nut installation kits contain everything you need to mount your wheels. McGard lug nut installation kits include Tough Nuts, which are guaranteed for life not to rust, chip, or peel! Also included are four wheel locks, one wheel lock key, and a storage pouch. With McGard lug nut installation kits, you get all of the high-quality parts you need in one package!
( 133 )
$109.99
—
$175.99
Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.
( 318 )
$113.99
—
$182.99
Mopar Replacement automatic transmission fluid comes in formulations to keep your Mopar's shift performance in top peak condition. Genuine OEM Mopar transmission fluid is designed to provide dependable performance to keep your Mopar ride running its best. Order the formulation that you need.
( 30 )
$101.99
U.S. Wheel 664 Series OE gloss white wheels are ready to complement and accent your vehicle build. They are available in 15 in., 16 in., and 17 in. diameters to cover a wide range of fitment options. These wheels have an all steel construction, and white powdercoated gloss white finish with red stripe accent encompassing the inner edge of the rim. The outside knob for the 8-lug cap is 11 5/8 in. and the 5-lug cap is 10 1/8 inches. Center caps are sold separately. Choose the wheel fitment for your application needs.
( 6 )
$266.99
On Sale
When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.
( 623 )
$249.95
$224.95
Manufacturer Rebate
MagnaFlow universal catalytic converters by Car Sound form the basic building blocks for many applications. The main benefit of universal catalytic converters is that one unit may cover a wide variety of vehicle makes and models. Installing universal converters often requires the use of welding, cutting, and tube-bending equipment that is readily available to most professional installers. They are extremely well made, with features such as: * A ribbed body that minimizes expansion and distortion when the converter heats up. They form a channel that protects the cushioning mat from direct exposure to exhaust gasses, and hold the ceramic catalyst in proper alignment. * A 1/2 in. lap joint where the necks meet the body. The neck does not extend into the converter body, where it could hamper exhaust flow. * Manufactured with separate dies on different sized inlets. Putting larger neck sizes on smaller bodies would reduce the flow of the converter and the quality of the product. * A monolithic honeycomb catalyst. The ceramic is designed for maximum flow and surface area. The coating method is strictly controlled to maintain exact specifications. * Seam-welded close to the converter body for a strong, tight bond. Welding along the edge could allow the converter to expand like the folds in an accordion, allowing the catalyst to move around. * Heavier-gauge stainless steel, tip-to-tip. They do not use inferior mixed weights and materials. * An aluminized or stainless OEM-style ribbed heat shield that creates a rigid wall of protection against heat and adds to the structural stability of the converter.
( 187 )
$162.56
Control your air shocks from the driver's seat with Air Lift universal air shock controllers. They work with most air shocks and allow the driver the convenience of pressure adjustments right from the driver's seat. A universal connector, onboard compressor, dash-mounted gauge panel, and all hardware and lines necessary for installation are included.
( 43 )
$158.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
