2014 - Free Shipping on Orders Over $109 at Summit Racing

Ford Performance Parts 5.0L Coyote Gen 4X Crate Engines

Ford Performance Parts 5.0L Coyote Gen 4X crate engines are modern 5.0L 32-valve DOHC V8s that utilize advanced features, such as direct and port fuel injection, twin independent variable camshaft timing (Ti-VCT), high-flow aluminum cylinder heads, and 12:1 compression to deliver 460 hp and 420 lb.-ft. of torque (with premium fuel). The all-aluminum cylinder block features plasma transferred arc spray-in liners, cross-bolted main bearing caps, and thick main bearing bulkheads for strength. Ford's Gen 4X 5.0L Coyote features a single 80mm throttle body for easier packaging in various applications. Features and specs: * Hypereutectic aluminum pistons * Sintered steel connecting rods as used on the Boss 302 Mustang * Forged steel crankshaft * Single 80mm "drive-by-wire" throttle body * 9.5 qt. steel oil pan * Composite lightweight intake manifold * Mustang GT 409 stainless steel exhaust manifold—right side only * Engine mount bosses and bellhousing mount pattern common to 5.0L modular engines * 10R80 flexplate included * Engine weight: 445 lbs. without front accessory drive components Note: Driver side exhaust flange utilizes 5.2L pattern

Not Yet Reviewed

$11,704.99

Ford Performance Parts 5.0L Coyote Power Module with 10-Speed Automatic Transmission Combo Kits

Ford Performance presents the next generation 5.0L power all-in-one complete powertrain kit! The crew at Ford Performance spec'd out these kits to simplify the swap of the newest, most innovative 5.0L Coyote engine into just about any Ford vehicle. The Coyote power module teams the Mustang GT 460 hp 5.0L Coyote V8 with a state-of-the-art 10-speed automatic transmission, along with all the electronics and hardware to finish the installation. The engine features advances like direct and port fuel injection, twin independent variable camshaft timing, along with a lightweight plasma transferred wire arc spray aluminum engine block. The Coyote power module simplifies both the shopping and build experience by kitting up the right parts that are matched to deliver potent performance with civilized drivability. The engine control pack is truly plug-and-play to simplify the conversion to a modern electronically fuel injected V8 high performance engine. Build the Coyote project of your dreams with high-quality aftermarket parts by Ford Performance!

Not Yet Reviewed

$19,555.99

Magnuson Magnum TVS2650 Supercharger Kits

Magnuson TVS2650 supercharger kits make power you can live with! Magnuson's powertrain integration technology offers you the ability to have big horsepower and drivability in the same supercharger. The TVS2650 system was developed to be a direct bolt on kit with minimal downtime, and straightforward installation. An enthusiast with basic tools can install the system in a weekend, or about a day for an experienced installer. The supercharger itself is maintenance free- pre-filled and sealed, nothing to check or top off for the lifetime of the engine. Magnuson only uses the highest quality components in their supercharger kits. Everything you need to supercharger your application is included, right down to detailed step-by-step installation instructions. Order yours today and unleash the power of a Magnuson Supercharger!

5.0 out of 5 stars ( 1 )

$7,395.00

—

$8,995.00

Summit Bucks

BluePrint Builder Series LS376/530HP Standard Edition EFI Crate Engine and 4L65/70E Trans Combos

BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 530 horsepower, this standard edition builder series includes a black pulley kit and 4L65/70E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this assembly produces 495 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * New Cast Iron 6.2L * Main caps are 6-bolt * One-piece rear main seal * Reluctor wheel – 58x * Cam sensor – 4x (in timing cover) * Knock sensor provision on side Rotating Assembly: * Nodular iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift - 238 * Lobe separation angle (LSA) – 113 degrees * Intake centerline – 110 degrees Ignition Timing * Firing order is 1-8-7-2-6-5-4-3 Assembled 4-speed Transmission Package: * Complete 4L65/70E package with electronic transmission controller * Torque converter with 2,200–2,400 rpm stall * Non-weighted flexplate * Starter Other Components: * Holley Terminator X Max Gen IV complete EFI engine management system, and DBW (Drive-By-Wire) pedal kit * DBW throttle body * GM Muscle-car Swap oil pan * Loaded intake manifold * Fuel injectors (EV6 type) and rail * Coil packs * Spark plugs and wires * Water pump * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys * Champion 3015 spark plugs (0.040 in. gap) Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91 octane. Recommended oil is BPP710.

Not Yet Reviewed

$20,399.00

—

$23,499.00

Summit Bucks

BluePrint Builder Series LS427/625HP Standard Edition EFI Crate Engine and 4L65/70E Trans Combos

BluePrint Builder Series LS427/625HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 625 horsepower, this standard edition builder series includes a polished pulley kit and 4L65/70E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 565 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/625HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * OEM style (4.060 in. bored to 4.069 in.) * Main caps are 6-bolt * One-piece rear main seal Rotating Assembly: * New forged crankshaft * Stroke – 4.125 in. * Forged connecting rods (6.125 in.) * Forged pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.624 in. * Exhaust valve lift – 0.624 in. * Intake duration at 0.050 in. of lift – 239 * Exhaust duration at 0.050 in. of lift - 255 * Lobe separation angle (LSA) – 114 degrees Ignition Timing * ECM supplied with calibration (initial and total timing are controlled by PCM) * Firing order is 1-8-7-2-6-5-4-3 Assembled 4-speed Transmission Package: * Complete 4L65/70E package with electronic transmission controller * Torque converter with 2,200–2,400 rpm stall * Non-weighted flexplate * Starter Other Components: * All required (to make engine run) sensors and wiring harness (LS controller package only controls engine) * Unlocked ECU for local Dyno shop tuning refinement * LT4 87mm DBW (Drive-By-Wire) throttle body * Valve covers, retro-fit oil pan (fits most 1955-95 GM front engine, RWD, V8 cars), and timing cover * LS3 car intake manifold * Fuel injectors (42 lbs.) and return-less fuel rail * Coil packs * Spark plug wires * Gas/throttle pedal * Complete front accessory drive includes A/C, power steering, alternator, belts, and pulleys * ACDelco 41-985 spark plugs (0.040 in. gap) Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91-93 octane. Recommended oil is BPP710. Not designed for use with dry sump or pollution-controlled vehicles.

Not Yet Reviewed

$23,999.00

—

$26,499.00

BluePrint Engines Pro Series Chevy LS 376 C.I.D. 510 HP EFI Deluxe Dressed Long Block Crate Engines

One of the most popular engine platforms for street cars and restomods is an LS-compatible design, and BluePrint's GM LS-compatible 376 c.i.d. Pro Series engines deliver 510 hp and 440 lb.-ft. of torque to provide proven power and versatility. These deluxe dressed crate engines feature LS3-style aluminum cylinder heads, a 10.7:1 compression ratio, hydraulic roller cam, hypereutectic pistons, and a nodular iron crankshaft housed in a BluePrint high-strength cast iron block. Available with a polished or black finished pulley kit, select the crate engine preferred to build some serious performance for your vehicle. Specs and features: * BluePrint Engines high-strength cast iron (LSX-style) block -- Increased deck thickness and strength webbing -- Utilizes OEM LS3 front and rear covers -- Improved water jacket design -- Extended cylinder skirt -- Priority main oiling -- One-piece rear main seal -- 6-bolt main -- 4.0662 in. bore * Rotating assembly: -- Nodular iron crankshaft -- 3.622 in. stroke -- 6.098 in. connecting rods with 150,000 psi bolts -- BluePrint hypereutectic pistons -- Internally balanced front and rear * BluePrint LS3 aluminum cylinder heads: -- 69cc chamber -- 2.165 in. intake/1.590 in. exhaust valves -- 259cc intake/102cc exhaust runners * BluePrint hydraulic roller camshaft: -- .612 intake/.585 exhaust lift -- 225 intake/238 exhaust duration at .050 -- 113-degree lobe separation * Additional components: -- Fuel injection ECU and wiring harness -- Drive-by-wire throttle body -- LS3 cast aluminum intake manifold -- LS swap oil pan -- Water pump -- Injectors and fuel rail kit -- Spark plugs and wires -- Harmonic balancer -- Timing cover -- Valve covers -- Coil packs * Polished or black front accessory drive: -- LT1-style water pump -- Type II power steering pump with remote reservoir -- LT1-style 140-amp alternator -- 7B10 peanut-style air conditioning compressor

Not Yet Reviewed

$13,799.00

—

$13,899.00

BluePrint Builder Series LS427/585HP Standard Edition EFI Crate Engine and 4L65/70E Trans Combos

The BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 585 hp, this standard edition builder series includes a pulley kit and 4L65/70E automatic transmission. The aluminum cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 520 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/585HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * BluePrint Engines High-Strength Cast Iron (LSX Style) Block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0695 in. Bore * 6-bolt main Rotating Assembly: * Forged crankshaft * 4.125 in. stroke * Forged 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * BluePrint aluminum cylinder heads * 69cc Chamber * 2.165 in. Intake /1.590 in. Exhaust valves * 259cc Intake /102cc Exhaust runners Cam Specs: * Hydraulic Roller * 0.624 Intake / 0.624 Exhaust lift * 239 Intake / 255 Exhaust duration * @.050-114 degree lobe separation Ignition Timing: * ECM supplied with calibration * Not capable of transmission control * Transmission Controller Required Other Components: * Front accessory drive with water pump, alternator, power steering pump, and A/C compressor * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and fuel rail kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Important Notes: This engine requires a non-weighted flex plate/flywheel. Recommended Fuel: 91 Octane. The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment. Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The LS controller package is for engine control only. Does not contain any transmission or body control. The ECU comes with calibration that is optimal for our engine, however, please note that vehicle parameters such as gearing, tire size, vehicle weight, air intake, headers, etc. may necessitate additional tuning once installed into your specific vehicle. The ECU is unlocked for further refinement at your local dyno shop if required. BluePrint Engines recommends their air intake kit (BPPLS01013) to ensure correct MAF calculations and Dyno calibration are maintained with the provided ECU/tuning.

Not Yet Reviewed

$26,299.00

Summit Racing™ Automatic Transmissions

Summit Racing™ Automatic Transmissions combine quality and economy to offer replacement transmissions in many styles and options. These units are remanufactured with all-new clutches, thrust washers, seals, bushings, and high-energy bands, along with other "failure prone" hard parts depending on unit. Other features include a rebuilt front pump, a valve body with shift for street and performance and high-quality seals and gaskets. You get all these impressive upgrades, along with reliable performance and extreme value. All transmissions are Dyno tested before they're shipped. Order the model recommended for your vehicle.

3.46 out of 5 stars ( 63 )

$6,190.99

GearStar GM 4L80E Level 4 Transmissions

GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L80E Level 4 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 800 hp * Up to 700 lb.-ft. of torque * Stall: 2,800 to 3,400 * Custom-built, custom-stalled 10 in. billet racing lock-up converter * Master overhaul kit with Alto hardened steels * Raybestos Stage 1 frictions * TransGo reprogramming kit * Filter * Torrington bearing kit * Bushing kit * Thrust washer kit * Internal wiring harness * New manifold pressure switch * New EPC solenoid * New PWM solenoid * New input and output speed sensors * New 1-2 and 3-4 shift solenoids * Expanded capacity forward clutch drum * Extra-capacity 2nd gear clutch assembly * Expanded capacity 3rd clutch drum * Heat-treated input shaft * 300M main shaft * 300M forward clutch hub * Updated molded steel direct clutch piston * Updated reverse band * New low roller assembly * Wide kickdown band with new apply piston * Heavy-duty intermediate sprag * Updated boost valve * Updated TCC regulator valve * Blueprinted pump and valve body * Transmission mount * New OEM steel pan

1.0 out of 5 stars ( 1 )

$7,845.00

BluePrint Builder Series LS376/530HP Truck Edition EFI Crate Engine and 4L65/70E Trans Combos

The BluePrint Builder Series LS376/530 hp Truck Edition EFI crate engine and 4L65/70E trans combo is a pre-assembled, ready-to-install powertrain package. It features a powerful, fuel-injected 376 cu. in. GM LS-compatible engine making 530 hp, paired with a durable 4L65/70E automatic transmission. The kit is designed for hot rods and trucks, simplifying installation with included electronics (Holley EFI), accessories, and even a starter, all dyno-tested. Key components and features: * Engine: GM LS-compatible 376 cu. in. (6.2L) small block, aluminum heads, hypereutectic pistons, nodular iron crank, producing 530 hp and 495 lbs.-ft. torque * Transmission: 4L65/70E 4-speed automatic, pre-mated to the engine * Fuel injection: Holley Terminator X Max EFI System with ECU, harness, drive-by-wire pedal, and throttle body * Accessories: Comes with a front accessory drive (alternator, power steering, A/C, water pump, belts/pulleys) * Ready-to-go: Assembled, dyno-tested, includes starter, swap oil pan, coil packs, plugs/wires, and a base tune for 91+ octane fuel * Truck Edition: Often includes a lower-profile oil pan and potentially 4WD-ready features, optimized for truck builds * Combo benefits: -- Simplifies swaps: Combines the engine and transmission as one unit, eliminating alignment issues -- Complete solution: Offers a turn-key drivetrain with electronics and accessories, saving time and complexity -- Performance and reliability: Built with quality components and tested for specified power levels -- This is a powerful, complete, and hassle-free LS engine and transmission package for builders wanting a strong, modern powertrain for their classic truck or resto-mod project

Not Yet Reviewed

$20,599.00

—

$22,899.00

Magnuson Magnum TVS2300 Supercharger Kits

Magnuson Magnum TVS2300 supercharger is designed to deliver maximum performance while retaining factory-like drivability and reliability. Generating 6 psi of boost, the Magnuson TVS2300 Hybrid Roots Style Supercharger delivers power gains of approximately 120 horsepower and 120 foot-pounds of torque at the rear wheels! But peak horsepower and torque numbers don't tell the whole story. "Under the curve" power is significantly enhanced delivering near instantaneous boost and torque upon demand that really pins you back in your seat. Inside of the supercharger manifold, a large liquid-to-air intercooler keeps your Intake Air Temperatures in check and provides consistent and repeatable performance. Combine that with the front-mounted heat exchanger, electric water pump, and intercooler coolant reservoir and you have a supercharger system with IATs that are typically only 20-40 degrees Fahrenheit over the ambient temperature. Maximizing your efficiency during cruising is the job of the supercharger's integrated bypass valve. This vacuum operated system allows air to bypass the supercharger and the rotors to "free spin" under light engine loads. During this situation the parasitic loss of the supercharger system is essentially negated, taking less than one-third of a horsepower to turn the rotors. This bypass valve also allows your supercharged vehicle to maintain stock-like derivability and fuel economy - giving you a package that delivers power without compromise.

4.75 out of 5 stars ( 4 )

$7,295.00

—

$8,195.00

Magnuson Magnum MP90 Supercharger Kits

Thanks to its positive-displacement roots-type design, the Magnuson Magnum MP90 delivers immediate throttle response with zero turbo lag and torque that's ready when you are, from off-idle through the entire rev range. Designed for daily dependability and hard use alike, this system integrates a large liquid-to-air intercooler, front-mounted heat exchanger, and electric water pump to keep intake temps down and performance consistent, even under heavy load or hot weather. Whether you're crawling at Moab or hauling on the jobsite, the MP90 is built to keep pace. Magnuson's engineers developed this system to meet the same quality and durability standards as OEM components. The supercharger, intake manifold, and intercooler are integrated into a single sealed unit, minimizing leak points, reducing install time, and requiring zero maintenance. It's pre-filled, factory sealed, and ready to run out of the box. Installation is straightforward, a pro can handle it in a day, and a skilled enthusiast can complete it over a weekend. The included 50-state-legal calibration is delivered via a plug-and-play handheld programmer, tuned for both daily drivability and maximum power gains.

4.0 out of 5 stars ( 2 )

$6,395.00

Summit Bucks

Vortech Tuner Centrifugal Supercharger Kits

If you're looking for a supercharger your can customize to your needs, without including parts that you don't want, then Vortech kits are for you. Vortech's tuner centrifugal supercharger kits feature lightweight, investment-cast aluminum impellers that are heat-treated, CNC-machined, and high-speed balanced to ensure smooth operation. The gear cases and volutes are cast from premium A356 aluminum alloy, heat-treated, and then CNC-machined. Kits are available in both satin and polished finishes and come with a step-by-step, fully illustrated installation manual. Tuner kits do not include fuel and engine management hardware to allow for custom tuning. These kits do require custom (dyno) tuning by a specialist. Tuner kits are not smog legal. Most kits also include: * Matched supercharger * Heat-resistant silicone hose couplings * Premium-grade flex hose * Flow-tested cast aluminum and/or urethane air discharge tubing * Compressor bypass valve * OEM-style heat-treated cast 356 aluminum mounting brackets * Supercharger drive pulley * Integrated belt tensioner * Premium drive belt * Stainless steel clamps * Heavy-duty mounting hardware Some kits will include a high-flow air intake system, and a reusable air filter element.

5.0 out of 5 stars ( 1 )

$6,604.99

—

$8,876.99

ATK High Performance GM LM7 5.3L with AFR Heads 500 HP Crate Engines with EFI

ATK specializes in muscle. With the highest quality internal parts and dyno-proven combinations of every engine built, ATK is able to add the most bang for your buck and back it up with an industry leading warranty. This ATK High Performance GM LM7 5.3L 500 hp long block crate engine is fitted with AFR heads and FiTech EFI. Engine specifications: * Horsepower: 500 * Torque: 440 * Block: OE LM7/5.3L iron * Bore/stroke: up to 3.903 in. x 3.622 in. * Displacement (cu.in): up to 347c.i.d. * Crankshaft: OE GM 24 tooth reluctor wheel * Rods: OE powder metal * Pistons: Hypereutectic 10.1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: Custom performance grind * Timing chain: OE single roller * Cylinder heads: -- AFR CNC ported aluminum -- 59cc/200cc -- 2.000 in. intake/1.570 in. exhaust * Rocker arms: OE 1.7 ratio * Oil pump: Melling M295 * EFI System: -- FiTech Ultra port injection LS1 750 hp with transmission control -- Wiring harness and ECM/TCM included * Fuel injectors: FiTech 55 lb. * Spark plugs: Autolite #104 * Spark plug wires: 8mm * Balancer: Stock internally balanced

Not Yet Reviewed

$8,899.99

Roush R2300 Roushcharger Kits

Do you want more power under the hood of your Ford? Roush R2300 Roushcharger kits are just what you need. Featuring a TVS (Twin Vortices Series) supercharger, these kits create big performance with unsurpassed reliability. They also feature 4-lobe rotors and high-flow inlets and outlets for more volumetric capacity at higher rpm to give you serious ground-pounding power. Available in several configurations, depending on your power needs and application, Roush R2300 Roushcharger kits are sure to have your Mustang beating all of the competition and ruling the streets.

Not Yet Reviewed

$7,949.98

ATK High Performance GM LQ4 6.0L with LS3 Heads 535 HP Base Long Block Crate Engines

ATK specializes in muscle. With the highest quality internal parts and dyno-proven combinations of every engine built, ATK is able to add the most bang for your buck and back it up with an industry leading warranty. This ATK High Performance GM LQ4 6.0L 535 hp base long block crate engine is fitted with LS3 heads. Engine specifications: * Horsepower: 535 * Torque: 485 * Block: OE LQ4/LQ9 6.0L iron * Bore/stroke: up to 4.030 in. x 3.622 in. * Displacement (cu.in): up to 371c.i.d. * Crankshaft: OE GM 24 tooth reluctor wheel * Rods: OE powder metal * Pistons: Hypereutectic 10.1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: Custom performance grind * Timing chain: OE single roller * Cylinder heads: -- ATK LS3 rectangular port aluminum -- 69cc/255cc -- 2.160 in. intake/1.600 in. exhaust * Rocker arms: OE 1.7 ratio with trunnion upgrade * Oil pump: Melling M295

Not Yet Reviewed

$5,199.99

Spicer Drivetrain Products Ultimate Dana 44 Crate Axle Assemblies

For Jeep lovers who wish to upgrade their axles, Spicer Drivetrain Products Ultimate Dana 44 crate axle assemblies will give you increased durability and strength, on and off the trail. You can be assured of quality and performance when you rely on an industry leader like Spicer Drivetrain. Features: * Axle tubing 5/16 in. thick * Nickel chromoly steel axle shafts * Steel brackets 1/4 in. thick * 1350 axle shaft U-joints * Nodular iron differential cover

5.0 out of 5 stars ( 1 )

$5,169.99

—

$5,229.99

VEGE Remanufactured Long Block Crate Engines

VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.

3.74 out of 5 stars ( 76 )

$5,151.99

—

$8,195.99

Performance Design Carbon XR Intake Manifolds

Performance Design carbon XR intake manifolds feature cross-ram architecture constructed of carbon fiber and billet 6061-T6 aluminum for your LS3/LS7 application. They are built for torque with long runner lengths and plenums that employ a high-temperature, resin-infusion manufacturing process for consistent walls and a beautiful finish out of the mold with an internal core for rigidity. Their 5-axis CNC-machined head flange offers perfect port matching to the head entrance. The carbon fiber runners feature high-temperature, pre-impregnated manufacturing with braided stock resulting in no seams or ply drops throughout the part for ultimate strength. Build for performance without losing sight of aesthetics when you order the black or red Performance Design carbon XR intake manifolds best suited for your application. Other product features, items, and specifications include: * Runner length of 12.50 in. from bell mouth to head interface * Bell mouth entrance on each runner features a 2.75 in. effective diameter * Height – approximately 11.60 in. from block valley * Dual 90mm throttle with GM 4-bolt design (custom throttle plates can be used to fit different throttle bodies) * Plenum volume - 7.2L each (14.4L combined) * Accepts USCAR EV6-style fuel injectors (LS9/LSA injectors have targeted spray patterns and are not recommended) * Can be reversed on the engine * Works with moderate boost (rated up to 25 psi; custom builds for higher boost levels available as special orders) * Best suited for race cars, resto-mod, off-road race trucks, race boats, and hot rods (does not fit underhood on late model vehicles) * Throttle bodies can be rotated 180 degrees on LS7 versions * Single or dual IAC (LS1 style) can be mounted on either bank of LS7 versions * LS7 version accepts Gen 4 GM MAP sensor and features three 1/4 in.-NPT ports for PCV, charcoal canister, vacuum line, etc.

Not Yet Reviewed

$5,999.99

GearStar GM 4L65E Level 3 Transmissions

GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L65E Level 3 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 500 hp * Up to 500 lb.-ft. of torque * Stall: 2,600 to 3,200 * High performance 12 in. furnace-brazed converter -- Flanged hub and carbon fiber clutch * Master overhaul kit with Alto hardened steels * Raybestos Stage 1 frictions * Filter * 29-element dual cage sprag * High-capacity upgraded pump assembly * New hardened pump rings * New 13-vane pump rotor * New vanes * New stator * .500 boost valve * Pressure regulator valve * Updated boost valve * TransGo reprogramming shift kit with Shift Command * Bushing kit * New thrust washers * Complete Torrington bearing kit * Heavy-duty hardened sun shell * Heavy-duty expanded capacity input drum with reinforcing sleeve * High-rev spring kit * Corvette servo * Carbon fiber wide 2-4 band * New valve body spacer plate * Fill tube and stick * New shift solenoids * New EPC solenoid * New PWM solenoid * New 3/2 solenoid * New manifold pressure switch * New internal wiring harness with new TCC solenoid * New electronic speed sensor * Transmission mount * New OE steel transmission pan

Not Yet Reviewed

$5,445.00

—

$5,945.00

Chevrolet Performance 6.2L 376 C.I.D. Remanufactured Long Block Crate Engines

Chevrolet Performance 6.2L 376 c.i.d. remanufactured long block crate engines offer builders a good foundation to get their projects running. They also allow builders to finish their engine their way, with their own choice of intake manifold, fuel system, ignition, and other accessories. A successful finish begins with Chevrolet Performance 6.2L 376 c.i.d. remanufactured long block assemblies.

Not Yet Reviewed

$5,704.99

Ford Performance Parts 5.0L Coyote Power Module with T-56 Manual Transmission Combo Kits

Ford Performance Parts has the complete solution for your drivetrain upgrade needs with the 5.0L Coyote manual power module and T-56 manual transmission combo kit, which includes: * Gen 4X 5.0L Coyote crate engine * Tremec 6-speed manual transmission * Complete engine controller and wiring harness (control pack) It's Next Generation 5.0L power all in one complete powertrain kit. The crew at Ford Performance have spec'd out a kit to simplify the swap of the newest, most innovative 5.0L Coyote engine into just about any Ford vehicle. The Coyote power module teams the Gen 4X 5.0L Coyote V8 with a state-of-the-art Tremec 6-speed transmission, plus all the electronics and hardware to finish the installation. The engine features direct and port fuel injection, twin independent variable camshaft timing, and a lightweight plasma transferred wire arc spray aluminum engine block. Coyote power modules simplify both the shopping and build experience by kitting up the right parts that are matched to deliver potent performance with civilized drivability. The engine control pack is truly plug-and-play and simplifies conversions to a modern electronically fuel injected V8 high performance engine. Details and/or specs: * Gen 4X 5.0L Coyote engine * 460 hp at 7,000 rpm * 420 lbs.-ft. torque at 4,600 rpm * 12.0:1 compression ratio * Aluminum block * Boss 302 alternator kit * Starter and starter index plate * Control pack PCM and installation kit is tunable for power upgrades * Runs on pump gas * Steel Quicktime bellhousing * Roller pilot bearing * Tremec 6-speed transmission 2.66 1st gear * Clutch fork / throw-out bearing * Clutch kit * Billet flywheel * Installation hardware * Note: Engine will be fitted with an automatic flexplate. Included is a billet flywheel, to be installed on engine before installation into vehicle.

Not Yet Reviewed

$19,700.99

On Sale

BD Diesel Performance Automatic Transmissions

BD Diesel Performance automatic transmissions are designed to transfer the power from high-torque modified diesel engines. They feature redesigned clutch packs with 50 percent more holding surface, steel 6-pin planetary gear carriers, and new lube ports added for high-load areas. Shift strategies and pressure circuits are also modified to handle the high-torque applications. BD Diesel transmissions are not rebuilt factory transmissions--they are custom-tailored to work with your modified truck.

3.0 out of 5 stars ( 1 )

$7,094.95

$5,164.16

—

$8,395.00

Magnuson Magnum TVS2650R Supercharger Kits

Take your Z06 to the next level with Magnuson's TVS2650 Magnum Supercharger System! Built off of Magnuson's premium Magnum Performance Line, their Corvette Magnum System will give your engine an incredible 76 extra horsepower: 726 hp and 690 ft-lbs at the crank! The system has been designed to fit under the hood of a stock C7 Z06, all while featuring two massive charge air coolers for maximum cooling capability. At Magnuson, they only use the highest quality components in their supercharger kits. Everything you need to supercharge your Corvette is included, right down to detailed step-by-step installation instructions. Order yours today and unleash the power of a Magnum Supercharger on your Corvette!

5.0 out of 5 stars ( 1 )

$7,895.00

—

$9,295.00

2014 Parts and Accessories